Running that command gave me records from each boot that are identical. Here's the latest:
Code:
Oct 21 13:13:40 nimbus kernel: [ 0.884990] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
Oct 21 13:13:40 nimbus kernel: [ 0.885013] e1000: Copyright (c) 1999-2006 Intel Corporation.
Oct 21 13:13:40 nimbus kernel: [ 0.885086] e1000 0000:02:04.0: >PCI IRQ 32 -> rerouted to legacy IRQ 16
Oct 21 13:13:40 nimbus kernel: [ 1.122223] e1000 0000:02:04.0: >eth0: (PCI:66MHz:32-bit) 00:12:3f:20:d7:04
Oct 21 13:13:40 nimbus kernel: [ 1.122245] e1000 0000:02:04.0: >eth0: Intel(R) PRO/1000 Network Connection
Oct 21 13:13:40 nimbus kernel: [ 1.566228] e1000 0000:04:03.0: >eth1: (PCI:33MHz:32-bit) 00:12:3f:20:d7:05
Oct 21 13:13:40 nimbus kernel: [ 1.566247] e1000 0000:04:03.0: >eth1: Intel(R) PRO/1000 Network Connection
Oct 21 13:13:40 nimbus kernel: [ 4.201623] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Oct 21 13:13:40 nimbus kernel: [ 9.235916] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Oct 21 13:13:43 nimbus dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3
Oct 21 13:13:46 nimbus dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7
Oct 21 13:13:50 nimbus kernel: [ 19.256712] e1000: eth0 NIC Link is Up 10 Mbps Full Duplex, Flow Control: RX/TX
Oct 21 13:13:50 nimbus kernel: [ 19.256914] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Oct 21 13:13:53 nimbus dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7
Oct 21 13:13:53 nimbus dhclient: DHCPREQUEST of 192.168.1.125 on eth0 to 255.255.255.255 port 67
Bookmarks