Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Is this a DHCP problem?

  1. #1
    Join Date
    Nov 2010
    Beans
    10

    Is this a DHCP problem?

    hope someone can help on this.

    I have lost internet access after installing latest batch of updates on 12.04.
    My laptop sees my wireless router OK.

    ping returns 'Unknown Host' for external sites.
    ping local devices returns '100% packet loss'.
    PING 127.0.0.1 gives '0% packet loss'

    Is this a DHCP problem and how can I check?
    Last edited by patrick2310; October 12th, 2012 at 08:31 PM.

  2. #2
    Join Date
    Jun 2009
    Location
    0:0:0:0:0:0:0:1
    Beans
    4,114
    Distro
    Xubuntu 13.04 Raring Ringtail

    Re: Is this a DCHP problem?

    127.0.0.1 is the loop back address
    post output of
    Code:
    ifconfig
    Laptop: ASUS A54C-NB91 (Storage: WD3200BEKT + MKNSSDCR60GB-DX); Desktop: Custom Build - Images included; rPi Server
    Putting your Networked Printer's scanner software to shame PHP Scanner Server
    I frequently edit my post when I have the last post

  3. #3
    Join Date
    Nov 2010
    Beans
    10

    Re: Is this a DCHP problem?

    Thank you. This is what I get:
    Code:
     
     
    eth0     
    Link encap:Ethernet  HWaddr 00:16:36:31:98:23            
    UP BROADCAST MULTICAST  MTU:1500  Metric:1         
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0  collisions:0 txqueuelen:1000           
    RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)       
    Interrupt:17 
     
    lo  
    Link encap:Local Loopback            
    inet addr:127.0.0.1  Mask:255.0.0.0          
    inet6 addr: ::1/128 Scope:Host          
    UP LOOPBACK RUNNING  MTU:16436  Metric:1          
    RX packets:1599 errors:0 dropped:0 overruns:0 frame:
    TX packets:1599 errors:0 dropped:0 overruns:0 carrier:0
     collisions:0 txqueuelen:0       
    RX bytes:106108 (106.1 KB)  TX bytes:106108 (106.1 KB)
     
    wlan0   
    Link encap:Ethernet  HWaddr 00:13:02:21:ea:e6        
    inet6 addr: fe80::213:2ff:fe21:eae6/64 Scope:Link 
    UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1        
    RX packets:3816 errors:0 dropped:0 overruns:0 frame:0  
    TX packets:1799 errors:0 dropped:0 overruns:0 carrier:0
     collisions:0 txqueuelen:1000 
    RX bytes:684650 (684.6 KB)  TX bytes:177547 (177.5 KB)
    Sorry for delay -I am having to save to thumb drive & transfer to Win to post.
    Any help?

  4. #4
    Join Date
    Jun 2009
    Location
    0:0:0:0:0:0:0:1
    Beans
    4,114
    Distro
    Xubuntu 13.04 Raring Ringtail

    Re: Is this a DCHP problem?

    if it is a dual boot you can save the file directly to your windows desktop, that said
    i assume you are using wireless, try hardwire
    have you tried to connect to your wifi?
    edit connections with nm-connection-editor

    Code:
    lspci | grep Ethernet
    Laptop: ASUS A54C-NB91 (Storage: WD3200BEKT + MKNSSDCR60GB-DX); Desktop: Custom Build - Images included; rPi Server
    Putting your Networked Printer's scanner software to shame PHP Scanner Server
    I frequently edit my post when I have the last post

  5. #5
    Join Date
    Nov 2010
    Beans
    10

    Re: Is this a DCHP problem?

    Tried wired direct to router. This allows ping to reach local devices with no packet loss. External sites return
    Code:
     6 packets transmitted 1 received 83% loss
    With the browser I get limited and slow link to external sites.

    The lcsi returns
    Code:
     
    Broadband Corp Netlink BCM5789 Gigabit Gigabit PCI Express (rev 11)

  6. #6
    Join Date
    Jun 2009
    Location
    0:0:0:0:0:0:0:1
    Beans
    4,114
    Distro
    Xubuntu 13.04 Raring Ringtail

    Re: Is this a DCHP problem?

    that is the hardwire device are you using a usb for wireless? if so lsusb
    Laptop: ASUS A54C-NB91 (Storage: WD3200BEKT + MKNSSDCR60GB-DX); Desktop: Custom Build - Images included; rPi Server
    Putting your Networked Printer's scanner software to shame PHP Scanner Server
    I frequently edit my post when I have the last post

  7. #7
    Join Date
    Nov 2010
    Beans
    10

    Re: Is this a DHCP problem?

    No it's not USB. Its my laptop card.
    I plugged my laptop into the wireless router with ethernet cable.

  8. #8
    Join Date
    Nov 2010
    Beans
    10

    Re: Is this a DHCP problem?

    Thanks for your time so far.

    I think that maybe it is not a DCHP problem. I switched off wireless card and the ethernet to router works fine. No packet losses on pings and browser gets to web sites OK.
    It seems that my laptop wireless card is hogging the traffic. Is it constantly trying to get connection and failing?

    Any ideas?

  9. #9
    Join Date
    Jun 2009
    Location
    0:0:0:0:0:0:0:1
    Beans
    4,114
    Distro
    Xubuntu 13.04 Raring Ringtail

    Re: Is this a DHCP problem?

    not without knowing the chipset of the wifi card
    if you can post the full output of lspci -vv that would be useful
    now that you have a way to connect that should be easy to do
    Laptop: ASUS A54C-NB91 (Storage: WD3200BEKT + MKNSSDCR60GB-DX); Desktop: Custom Build - Images included; rPi Server
    Putting your Networked Printer's scanner software to shame PHP Scanner Server
    I frequently edit my post when I have the last post

  10. #10
    Join Date
    Nov 2010
    Beans
    10

    Re: Is this a DHCP problem?

    This is a lot of data - do u want me to shorten it? If yes, how. Thanks

    Code:
      
    lspci  -vv
    patrick@patrick-TravelMate-3010:~$ lspci -vv
    00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
        Subsystem: Acer Incorporated [ALI] Device 0098
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>
        Kernel driver in use: agpgart-intel
    
    00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) (prog-if 00 [VGA controller])
        Subsystem: Acer Incorporated [ALI] Device 0098
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at b0080000 (32-bit, non-prefetchable) [size=512K]
        Region 1: I/O ports at 1800 [size=8]
        Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M]
        Region 3: Memory at b0040000 (32-bit, non-prefetchable) [size=256K]
        Expansion ROM at <unassigned> [disabled]
        Capabilities: <access denied>
        Kernel driver in use: i915
        Kernel modules: intelfb, i915
    
    00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
        Subsystem: Acer Incorporated [ALI] Device 0098
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Region 0: Memory at b0100000 (32-bit, non-prefetchable) [size=512K]
        Capabilities: <access denied>
    
    00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
        Subsystem: Acer Incorporated [ALI] Device 0098
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 45
        Region 0: Memory at b0000000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd-hda-intel
    
    00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 00006000-00006fff
        Memory behind bridge: 40f00000-411fffff
        Prefetchable memory behind bridge: 0000000040000000-00000000401fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
            PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport
        Kernel modules: shpchp
    
    00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        I/O behind bridge: 00005000-00005fff
        Memory behind bridge: 40a00000-40cfffff
        Prefetchable memory behind bridge: 0000000040d00000-0000000040efffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
            PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport
        Kernel modules: shpchp
    
    00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 02) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
        I/O behind bridge: 00004000-00004fff
        Memory behind bridge: 40600000-407fffff
        Prefetchable memory behind bridge: 0000000040800000-00000000409fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
            PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport
        Kernel modules: shpchp
    
    00:1c.3 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 4 (rev 02) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=05, subordinate=07, sec-latency=0
        I/O behind bridge: 00003000-00003fff
        Memory behind bridge: 40200000-403fffff
        Prefetchable memory behind bridge: 0000000040400000-00000000405fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
            PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport
        Kernel modules: shpchp
    
    00:1d.0 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
        Subsystem: Acer Incorporated [ALI] Device 0098
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 23
        Region 4: I/O ports at 1820 [size=32]
        Kernel driver in use: uhci_hcd
    
    00:1d.1 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
        Subsystem: Acer Incorporated [ALI] Device 0098
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 19
        Region 4: I/O ports at 1840 [size=32]
        Kernel driver in use: uhci_hcd
    
    00:1d.2 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
        Subsystem: Acer Incorporated [ALI] Device 0098
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 18
        Region 4: I/O ports at 1860 [size=32]
        Kernel driver in use: uhci_hcd
    
    00:1d.3 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
        Subsystem: Acer Incorporated [ALI] Device 0098
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin D routed to IRQ 16
        Region 4: I/O ports at 1880 [size=32]
        Kernel driver in use: uhci_hcd
    
    00:1d.7 USB controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI])
        Subsystem: Acer Incorporated [ALI] Device 0098
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 23
        Region 0: Memory at b0004000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci_hcd
    
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) (prog-if 01 [Subtractive decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Bus: primary=00, secondary=0a, subordinate=0e, sec-latency=56
        I/O behind bridge: 00002000-00002fff
        Memory behind bridge: b0400000-b04fffff
        Prefetchable memory behind bridge: 0000000044000000-0000000047ffffff
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
            PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
    
    00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
        Subsystem: Acer Incorporated [ALI] Device 0098
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>
        Kernel modules: leds-ss4200, iTCO_wdt, intel-rng
    
    00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] (rev 02) (prog-if 80 [Master])
        Subsystem: Acer Incorporated [ALI] Device 0098
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
        Latency: 0
        Interrupt: pin B routed to IRQ 19
        Region 0: I/O ports at 01f0 [size=8]
        Region 1: I/O ports at 03f4 [size=1]
        Region 2: I/O ports at 0170 [size=8]
        Region 3: I/O ports at 0374 [size=1]
        Region 4: I/O ports at 18b0 [size=16]
        Capabilities: <access denied>
        Kernel driver in use: ata_piix
    
    00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02)
        Subsystem: Acer Incorporated [ALI] Device 0098
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin B routed to IRQ 10
        Region 4: I/O ports at 18c0 [size=32]
        Kernel modules: i2c-i801
    
    02:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
        Subsystem: Intel Corporation PRO/Wireless 3945ABG Network Connection
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 44
        Region 0: Memory at 40f00000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>
        Kernel driver in use: iwl3945
        Kernel modules: iwl3945
    
    03:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5789 Gigabit Ethernet PCI Express (rev 11)
        Subsystem: Acer Incorporated [ALI] Device 0098
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 17
        Region 0: Memory at 40a00000 (64-bit, non-prefetchable) [size=64K]
        Expansion ROM at <ignored> [disabled]
        Capabilities: <access denied>
        Kernel driver in use: tg3
        Kernel modules: tg3
    
    0a:09.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
        Subsystem: Acer Incorporated [ALI] Device 0098
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 168, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 20
        Region 0: Memory at b0404000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=0a, secondary=0b, subordinate=0e, sec-latency=176
        Memory window 0: 44000000-47fff000 (prefetchable)
        Memory window 1: 48000000-4bfff000
        I/O window 0: 00002400-000024ff
        I/O window 1: 00002000-000020ff
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
        16-bit legacy interface ports at 0001
        Kernel driver in use: yenta_cardbus
        Kernel modules: yenta_socket
    
    0a:09.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller (prog-if 10 [OHCI])
        Subsystem: Acer Incorporated [ALI] Device 0098
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32 (750ns min, 1000ns max), Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 20
        Region 0: Memory at b0405000 (32-bit, non-prefetchable) [size=2K]
        Region 1: Memory at b0400000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: firewire_ohci
        Kernel modules: firewire-ohci
    
    0a:09.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
        Subsystem: Acer Incorporated [ALI] Device 0098
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 57 (1750ns min, 1000ns max), Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 20
        Region 0: Memory at b0406000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>
        Kernel driver in use: tifm_7xx1
        Kernel modules: tifm_7xx1

Page 1 of 2 12 LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •