Code:
Boot Info Script 0.61 [1 April 2012]
============================= Boot Info Summary: ===============================
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos4)/grub on this drive.
=> Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Arch Linux ()
Boot files: /etc/fstab
sda6: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 11.10
Boot files: /etc/fstab
sda7: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sda3: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda4: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files: /grub/grub.cfg /extlinux/extlinux.conf /grub/core.img
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 4.04 20110518
Boot sector info: Syslinux looks at sector 1493912 of /dev/sdb1 for its
second stage. SYSLINUX is installed in the directory.
The integrity check of the ADV area failed. No errors
found in the Boot Parameter Block.
Operating System:
Boot files: /syslinux.cfg /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 4,094 92,162,047 92,157,954 5 Extended
/dev/sda5 4,096 30,724,095 30,720,000 83 Linux
/dev/sda6 30,726,144 61,446,143 30,720,000 83 Linux
/dev/sda7 61,448,192 92,162,047 30,713,856 83 Linux
/dev/sda2 92,162,048 478,975,999 386,813,952 83 Linux
/dev/sda3 478,976,000 487,167,999 8,192,000 82 Linux swap / Solaris
/dev/sda4 * 487,168,000 488,396,799 1,228,800 83 Linux
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 16.2 GB, 16231956480 bytes
256 heads, 54 sectors/track, 2293 cylinders, total 31703040 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 32 31,703,039 31,703,008 c W95 FAT32 (LBA)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda2 31ba7460-8918-4fd1-9b33-e0cd280de3f4 ext4 /home
/dev/sda3 6c65ac25-376b-4a7e-ab96-e8ff186046b5 swap swap
/dev/sda4 f0aa9c04-0ef3-43f8-bc5b-8a1863cc947e ext4
/dev/sda5 2cd1bd50-2f3b-4219-b09f-5b3bf460be7a ext4 Archlinux
/dev/sda6 37c6768c-5ef8-4737-a4a7-32efc39e844f ext4
/dev/sda7 902b094a-62e5-4001-b4ec-884ad6341b63 ext4 New Distro
/dev/sdb1 5440-DF84 vfat
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda2 /home ext4 (rw,commit=0)
/dev/sda4 /boot ext4 (rw,commit=0)
/dev/sda6 / ext4 (rw,errors=remount-ro,commit=0)
/dev/sdb1 /media/5440-DF84 vfat (rw,nosuid,nodev,uid=1000,gid=1000,shortname=mixed,dmask=0077,utf8=1,showexec,flush,uhelper=udisks)
=============================== sda5/etc/fstab: ================================
--------------------------------------------------------------------------------
#
# /etc/fstab: static file system information
#
# <file system> <dir> <type> <options> <dump> <pass>
tmpfs /tmp tmpfs nodev,nosuid 0 0
# UUID=2cd1bd50-2f3b-4219-b09f-5b3bf460be7a LABEL=Archlinux
/dev/sda5 / ext4 rw,relatime,data=ordered 0 1
# UUID=31ba7460-8918-4fd1-9b33-e0cd280de3f4 LABEL=/home
/dev/sda2 /home ext4 rw,relatime,data=ordered 0 2
# UUID=2b12c742-6338-4af0-a97c-de7c16bb8112 LABEL=/boot
#/dev/sda4 /boot ext4 rw,relatime,data=ordered 0 2
#UUID=2b12c742-6338-4af0-a97c-de7c16bb8112 /boot ext4 defaults 0 2
UUID=2b12c742-6338-4af0-a97c-de7c16bb8112 /boot ext4 defaults 0 2
--------------------------------------------------------------------------------
=============================== sda6/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda6 during installation
UUID=37c6768c-5ef8-4737-a4a7-32efc39e844f / ext4 errors=remount-ro 0 1
# /boot was on /dev/sda4 during installation
UUID=f0aa9c04-0ef3-43f8-bc5b-8a1863cc947e /boot ext4 defaults 0 2
# /home was on /dev/sda2 during installation
UUID=31ba7460-8918-4fd1-9b33-e0cd280de3f4 /home ext4 defaults 0 2
# swap was on /dev/sda3 during installation
UUID=6c65ac25-376b-4a7e-ab96-e8ff186046b5 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda6: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
= initrd.img.old 2
= vmlinuz.old 1
============== sda6: Version of COM32(R) files used by Syslinux: ===============
boot/extlinux/chain.c32 : COM32R module (v4.xx)
============================= sda4/grub/grub.cfg: ==============================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set=root 37c6768c-5ef8-4737-a4a7-32efc39e844f
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
insmod part_msdos
insmod ext2
set root='(hd0,msdos4)'
search --no-floppy --fs-uuid --set=root f0aa9c04-0ef3-43f8-bc5b-8a1863cc947e
set locale_dir=($root)/grub/locale
set lang=en_US
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
if [ ${recordfail} != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Ubuntu, with Linux 2.6.38-8-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos4)'
search --no-floppy --fs-uuid --set=root f0aa9c04-0ef3-43f8-bc5b-8a1863cc947e
linux /vmlinuz-2.6.38-8-generic root=UUID=37c6768c-5ef8-4737-a4a7-32efc39e844f ro quiet splash vt.handoff=7
initrd /initrd.img-2.6.38-8-generic
}
menuentry 'Ubuntu, with Linux 2.6.38-8-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos4)'
search --no-floppy --fs-uuid --set=root f0aa9c04-0ef3-43f8-bc5b-8a1863cc947e
echo 'Loading Linux 2.6.38-8-generic ...'
linux /vmlinuz-2.6.38-8-generic root=UUID=37c6768c-5ef8-4737-a4a7-32efc39e844f ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /initrd.img-2.6.38-8-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos4)'
search --no-floppy --fs-uuid --set=root f0aa9c04-0ef3-43f8-bc5b-8a1863cc947e
linux16 /memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos4)'
search --no-floppy --fs-uuid --set=root f0aa9c04-0ef3-43f8-bc5b-8a1863cc947e
linux16 /memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
if [ "x${timeout}" != "x-1" ]; then
if keystatus; then
if keystatus --shift; then
set timeout=-1
else
set timeout=0
fi
else
if sleep --interruptible 3 ; then
set timeout=0
fi
fi
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
menuentry "Arch Linux" {
insmod ext2
set root=(hd0,5)
linux /vmlinuz-linux root=UUID=2cd1bd50-2f3b-4219-b09f-5b3bf460be7a
initrd /initramfs-linux.img
}
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
========================= sda4/extlinux/extlinux.conf: =========================
--------------------------------------------------------------------------------
## /boot/extlinux/extlinux.conf
##
## IMPORTANT WARNING
##
## The configuration of this file is generated automatically.
## Do not edit this file manually, use: extlinux-update
default l0
prompt 1
timeout 50
include themes/debian/theme.cfg
--------------------------------------------------------------------------------
=================== sda4: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
= grub/core.img 1
= grub/grub.cfg 1
= initrd.img-2.6.38-8-generic 2
= vmlinuz-2.6.38-8-generic 1
================= sda4: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
= extlinux/chain.c32 1
= extlinux/extlinux.conf 1
============== sda4: Version of COM32(R) files used by Syslinux: ===============
extlinux/chain.c32 : COM32R module (v4.xx)
============================== sdb1/syslinux.cfg: ==============================
--------------------------------------------------------------------------------
default menu.c32
prompt 0
menu title UNetbootin
timeout 100
label unetbootindefault
menu label Default
kernel /ubnkern
append initrd=/ubninit file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
label ubnentry0
menu label ^Help
kernel /ubnkern
append initrd=/ubninit
label ubnentry1
menu label ^Try Ubuntu without installing
kernel /casper/vmlinuz
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
label ubnentry2
menu label ^Install Ubuntu
kernel /casper/vmlinuz
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --
label ubnentry3
menu label ^Check disc for defects
kernel /casper/vmlinuz
append initrd=/casper/initrd.lz boot=casper integrity-check quiet splash --
label ubnentry4
menu label Test ^memory
kernel /install/mt86plus
append initrd=/ubninit
label ubnentry5
menu label ^Boot from first hard disk
kernel /ubnkern
append initrd=/ubninit
--------------------------------------------------------------------------------
================= sdb1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
?? = ?? ldlinux.sys 1
?? = ?? menu.c32 1
?? = ?? syslinux.cfg 1
============== sdb1: Version of COM32(R) files used by Syslinux: ===============
menu.c32 : COM32R module (v4.xx)
=============================== StdErr Messages: ===============================
xz: (stdin): Compressed data is corrupt
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
/home/bobby/Desktop/bootinfoscript: line 1646: [: 2.73495e+09: integer expression expected
I loaded the /dev/sda5 to /mnt and used os-prober, followed by update-grub. This got it to appear, but now when I click on Arch Linux in GRUB, it gives:
Adv Reply
Bookmarks