Code:
Module Size Used by
arc4 12473 2
carl9170 77667 0
mac80211 436455 1 carl9170
ath 19387 1 carl9170
cfg80211 178679 3 carl9170,mac80211,ath
bnep 17830 2
rfcomm 38139 4
bluetooth 158438 10 bnep,rfcomm
snd_usb_audio 101566 1
snd_usbmidi_lib 24603 1 snd_usb_audio
ppdev 12849 0
binfmt_misc 17292 1
dcdbas 14098 0
snd_hda_codec_idt 60251 1
snd_hda_intel 32765 3
snd_hda_codec 109562 2 snd_hda_codec_idt,snd_hda_intel
snd_hwdep 13276 2 snd_usb_audio,snd_hda_codec
snd_pcm 80845 3 snd_usb_audio,snd_hda_intel,snd_hda_codec
nouveau 708198 2
psmouse 87213 0
serio_raw 13027 0
usbhid 41906 0
gspca_zc3xx 51066 0
gspca_main 27654 1 gspca_zc3xx
snd_seq_midi 13132 0
hid 77367 1 usbhid
videodev 86588 1 gspca_main
snd_rawmidi 25424 2 snd_usbmidi_lib,snd_seq_midi
parport_pc 32114 1
snd_seq_midi_event 14475 1 snd_seq_midi
snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event
ttm 65344 1 nouveau
snd_timer 28931 2 snd_pcm,snd_seq
drm_kms_helper 45466 1 nouveau
mac_hid 13077 0
drm 197692 4 nouveau,ttm,drm_kms_helper
snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq
i82975x_edac 12911 0
i2c_algo_bit 13199 1 nouveau
snd 62064 19 snd_usb_audio,snd_usbmidi_lib,snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
mxm_wmi 12859 1 nouveau
wmi 18744 1 mxm_wmi
edac_core 46858 1 i82975x_edac
video 19068 1 nouveau
soundcore 14635 1 snd
snd_page_alloc 14115 2 snd_hda_intel,snd_pcm
lp 17455 0
parport 40930 3 ppdev,parport_pc,lp
sata_via 13495 0
tg3 137273 0
Code:
[ 2.008827] hub 2-0:1.0: 2 ports detected
[ 2.008932] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 2.008942] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.008946] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.009037] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.009076] uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000ff60
[ 2.009283] hub 3-0:1.0: USB hub found
[ 2.009289] hub 3-0:1.0: 2 ports detected
[ 2.009394] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.009405] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.009409] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.009487] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.009530] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
[ 2.009747] hub 4-0:1.0: USB hub found
[ 2.009754] hub 4-0:1.0: 2 ports detected
[ 2.009857] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 2.009867] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.009872] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.009949] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 2.009988] uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000ff20
[ 2.010203] hub 5-0:1.0: USB hub found
[ 2.010210] hub 5-0:1.0: 2 ports detected
[ 2.010391] usbcore: registered new interface driver libusual
[ 2.010464] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.013288] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.013299] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.013528] mousedev: PS/2 mouse device common for all mice
[ 2.013794] rtc_cmos 00:05: RTC can wake from S4
[ 2.013942] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 2.013972] rtc0: alarms up to one day, 242 bytes nvram, hpet irqs
[ 2.014079] device-mapper: uevent: version 1.0.3
[ 2.014208] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 2.014266] EISA: Probing bus 0 at eisa.0
[ 2.014273] Cannot allocate resource for EISA slot 1
[ 2.014276] Cannot allocate resource for EISA slot 2
[ 2.014278] Cannot allocate resource for EISA slot 3
[ 2.014297] EISA: Detected 0 cards.
[ 2.014309] cpufreq-nforce2: No nForce2 chipset.
[ 2.014312] cpuidle: using governor ladder
[ 2.014315] cpuidle: using governor menu
[ 2.014318] EFI Variables Facility v0.08 2004-May-17
[ 2.014743] TCP cubic registered
[ 2.014935] NET: Registered protocol family 10
[ 2.015988] NET: Registered protocol family 17
[ 2.016036] Registering the dns_resolver key type
[ 2.016061] Using IPI No-Shortcut mode
[ 2.016263] PM: Hibernation image not present or could not be loaded.
[ 2.016281] registered taskstats version 1
[ 2.025480] Magic number: 0:228:432
[ 2.025531] pci 0000:04:00.0: hash matches
[ 2.025580] rtc_cmos 00:05: setting system clock to 2012-10-06 13:24:18 UTC (1349529858)
[ 2.025610] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.025613] EDD information not available.
[ 2.152608] ata5.00: ATAPI: PHILIPS DVD+/-RW DVD8801, AD21, max UDMA/33
[ 2.168478] ata5.00: configured for UDMA/33
[ 2.304045] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.304077] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.304106] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.304132] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.305115] ata1.00: ATA-7: Hitachi HDS721680PLA380, P21OAB3A, max UDMA/133
[ 2.305121] ata1.00: 156250000 sectors, multi 8: LBA48 NCQ (depth 31/32), AA
[ 2.306303] ata1.00: configured for UDMA/133
[ 2.306517] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72168 P21O PQ: 0 ANSI: 5
[ 2.306738] sd 0:0:0:0: [sda] 156250000 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 2.306821] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.306858] sd 0:0:0:0: [sda] Write Protect is off
[ 2.306867] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.306921] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.309321] scsi 4:0:0:0: CD-ROM PHILIPS DVD+-RW DVD8801 AD21 PQ: 0 ANSI: 5
[ 2.313249] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 2.313255] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.313454] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 2.313638] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 2.350058] sda: sda1 sda2 < sda5 >
[ 2.350686] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.350723] Freeing unused kernel memory: 712k freed
[ 2.351128] Write protecting the kernel text: 5628k
[ 2.351200] Write protecting the kernel read-only data: 2324k
[ 2.374281] udevd[95]: starting version 175
[ 2.472049] Refined TSC clocksource calibration: 2992.502 MHz.
[ 2.472062] Switching to clocksource tsc
[ 2.495637] tg3.c:v3.121 (November 2, 2011)
[ 2.495661] tg3 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.495677] tg3 0000:04:00.0: setting latency timer to 64
[ 2.510710] sata_via 0000:05:04.0: version 2.6
[ 2.510734] sata_via 0000:05:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.510790] sata_via 0000:05:04.0: routed to hard irq line 11
[ 2.511794] scsi6 : sata_via
[ 2.512071] scsi7 : sata_via
[ 2.512229] scsi8 : sata_via
[ 2.512349] ata7: SATA max UDMA/133 port i16@0xd8a0 bmdma 0xd8e0 irq 16
[ 2.512357] ata8: SATA max UDMA/133 port i16@0xd8b0 bmdma 0xd8e8 irq 16
[ 2.512364] ata9: PATA max UDMA/133 port i16@0xd8c0 bmdma 0xd8f0 irq 16
[ 2.535096] tg3 0000:04:00.0: eth0: Tigon3 [partno(BCM95754) rev b002] (PCI Express) MAC address 00:1a:a0:31:e2:ef
[ 2.535107] tg3 0000:04:00.0: eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 2.535116] tg3 0000:04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 2.535123] tg3 0000:04:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 2.672047] usb 2-2: new low-speed USB device number 2 using uhci_hcd
[ 2.716839] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.843020] ata7: SATA link down (SStatus 0 SControl 310)
[ 3.084021] usb 3-2: new full-speed USB device number 2 using uhci_hcd
[ 3.170992] ata8: SATA link down (SStatus 0 SControl 310)
[ 3.356631] ata9.01: ATA-5: ST340016A, 3.75, max UDMA/100
[ 3.356638] ata9.01: 78165360 sectors, multi 0: LBA
[ 3.364534] ata9.01: configured for UDMA/100
[ 3.364729] scsi 8:0:1:0: Direct-Access ATA ST340016A 3.75 PQ: 0 ANSI: 5
[ 3.365057] sd 8:0:1:0: [sdb] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 3.365089] sd 8:0:1:0: Attached scsi generic sg2 type 0
[ 3.365192] sd 8:0:1:0: [sdb] Write Protect is off
[ 3.365199] sd 8:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.365262] sd 8:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.379872] sdb: sdb1
[ 3.380368] sd 8:0:1:0: [sdb] Attached SCSI disk
[ 3.512033] usb 4-2: new low-speed USB device number 2 using uhci_hcd
[ 16.563425] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.002933] udevd[306]: starting version 175
[ 17.031535] Adding 520188k swap on /dev/sda5. Priority:-1 extents:1 across:520188k
[ 17.071382] lp: driver loaded but no devices found
[ 17.164324] wmi: Mapper loaded
[ 17.167505] EDAC MC: Ver: 2.1.0
[ 17.184331] EDAC i82975x: ECC disabled on both channels.
[ 17.253789] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 17.284733] [drm] Initialized drm 1.1.0 20060810
[ 17.387046] type=1400 audit(1349529873.858:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=461 comm="apparmor_parser"
[ 17.388065] type=1400 audit(1349529873.862:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=461 comm="apparmor_parser"
[ 17.388619] type=1400 audit(1349529873.862:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=461 comm="apparmor_parser"
[ 17.412130] parport_pc 00:06: reported by Plug and Play ACPI
[ 17.412196] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
[ 17.413525] intel_rng: Firmware space is locked read-only. If you can't or
[ 17.413529] intel_rng: don't want to disable this in firmware setup, and if
[ 17.413531] intel_rng: you are certain that your system has a functional
[ 17.413533] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 17.442132] Linux video capture interface: v2.00
[ 17.442954] gspca_main: v2.14.0 registered
[ 17.443737] gspca_main: zc3xx-2.14.0 probing 046d:08d7
[ 17.445930] leds_ss4200: no LED devices found
[ 17.468167] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input2
[ 17.468736] generic-usb 0003:0461:4D15.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-2/input0
[ 17.487204] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input3
[ 17.487512] generic-usb 0003:413C:2003.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.2-2/input0
[ 17.487598] usbcore: registered new interface driver usbhid
[ 17.487603] usbhid: USB HID core driver
[ 17.500258] lp0: using parport0 (interrupt-driven).
[ 17.525530] VGA switcheroo: detected Optimus DSM method \ handle
[ 17.525586] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 17.525599] nouveau 0000:01:00.0: setting latency timer to 64
[ 17.539160] [drm] nouveau 0000:01:00.0: Detected an NV40 generation card (0x044500a2)
[ 17.551450] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[ 17.566000] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 17.566008] hda_intel: position_fix set to 1 for device 1028:01de
[ 17.566143] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 17.566205] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 17.637799] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 17.637810] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 17.637817] [drm] nouveau 0000:01:00.0: Bios version 05.44.02.63
[ 17.637825] [drm] nouveau 0000:01:00.0: TMDS table version 1.1
[ 17.637830] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 3.0
[ 17.637838] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000300 00000028
[ 17.637845] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01000302 00000000
[ 17.637851] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02011310 00000028
[ 17.637857] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 04011312 00000000
[ 17.637864] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x30 5 7 2
[ 17.637870] [drm] nouveau 0000:01:00.0: 0: 0x00001038: type 0x38 idx 0 tag 0x07
[ 17.637875] [drm] nouveau 0000:01:00.0: unknown type, using 0x30
[ 17.637881] [drm] nouveau 0000:01:00.0: 1: 0x00002039: type 0x39 idx 1 tag 0x08
[ 17.637886] [drm] nouveau 0000:01:00.0: unknown type, using 0xff
[ 17.637892] [drm] nouveau 0000:01:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff
[ 17.637900] [drm] nouveau 0000:01:00.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff
[ 17.637906] [drm] nouveau 0000:01:00.0: 4: 0x00000213: type 0x13 idx 4 tag 0xff
[ 17.637918] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xB1C9
[ 17.638390] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xB52E
[ 17.651545] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xBA68
[ 17.651574] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xBBBD
[ 17.652709] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xBD67
[ 17.652720] [drm] nouveau 0000:01:00.0: mem timing table length unknown: 14
[ 17.718646] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
[ 17.719016] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 17.719362] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 17.719728] input: HDA Intel Line-Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 17.770813] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 17.851396] [drm] nouveau 0000:01:00.0: 1 available performance level(s)
[ 17.851410] [drm] nouveau 0000:01:00.0: 0: core 275MHz shader 275MHz memory 600MHz fanspeed 100%
[ 17.851423] [drm] nouveau 0000:01:00.0: c: core 200MHz memory 401MHz
[ 17.858122] [TTM] Zone kernel: Available graphics memory: 252766 kiB.
[ 17.858128] [TTM] Initializing pool allocator.
[ 17.858154] [drm] nouveau 0000:01:00.0: Detected 128MiB VRAM
[ 17.871991] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 17.879982] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 17.879990] [drm] No driver support for vblank timestamp query.
[ 17.880054] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[ 17.880062] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[ 17.880072] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2)
[ 17.880079] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 3)
[ 18.010061] init: failsafe main process (618) killed by TERM signal
[ 18.231030] ppdev: user-space parallel port driver
[ 18.248777] [drm] nouveau 0000:01:00.0: allocated 1360x768 fb: 0x49000, bo da79e400
[ 18.248991] fbcon: nouveaufb (fb0) is primary device
[ 18.250048] Console: switching to colour frame buffer device 170x48
[ 18.250107] fb0: nouveaufb frame buffer device
[ 18.250112] drm: registered panic notifier
[ 18.250127] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
[ 18.314562] type=1400 audit(1349529874.786:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=733 comm="apparmor_parser"
[ 18.322834] type=1400 audit(1349529874.794:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=733 comm="apparmor_parser"
[ 18.323380] type=1400 audit(1349529874.794:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=733 comm="apparmor_parser"
[ 18.464625] type=1400 audit(1349529874.938:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=732 comm="apparmor_parser"
[ 18.608499] type=1400 audit(1349529875.082:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=735 comm="apparmor_parser"
[ 18.615576] type=1400 audit(1349529875.086:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//launchpad_integration" pid=735 comm="apparmor_parser"
[ 18.617262] type=1400 audit(1349529875.090:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=735 comm="apparmor_parser"
[ 18.649239] input: zc3xx as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/input/input8
[ 18.649797] usbcore: registered new interface driver zc3xx
[ 18.744839] usbcore: registered new interface driver snd-usb-audio
[ 18.832036] Bluetooth: Core ver 2.16
[ 18.832709] NET: Registered protocol family 31
[ 18.832716] Bluetooth: HCI device and connection manager initialized
[ 18.832722] Bluetooth: HCI socket layer initialized
[ 18.832727] Bluetooth: L2CAP socket layer initialized
[ 18.833841] Bluetooth: SCO socket layer initialized
[ 18.859436] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.859444] Bluetooth: BNEP filters: protocol multicast
[ 18.871066] Bluetooth: RFCOMM TTY layer initialized
[ 18.871080] Bluetooth: RFCOMM socket layer initialized
[ 18.871086] Bluetooth: RFCOMM ver 1.11
[ 18.975340] tg3 0000:04:00.0: irq 46 for MSI/MSI-X
[ 19.024173] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.024929] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.275868] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[ 21.275879] [drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output A
[ 21.509252] init: plymouth-stop pre-start process (1084) terminated with status 1
[201750.272039] usb 1-8: new high-speed USB device number 5 using ehci_hcd
[201751.987533] cfg80211: Calling CRDA to update world regulatory domain
[201752.620036] usb 1-8: reset high-speed USB device number 5 using ehci_hcd
[201752.788632] usbcore: registered new interface driver carl9170
[201752.821503] cfg80211: World regulatory domain updated:
[201752.821509] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[201752.821513] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[201752.821517] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[201752.821521] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[201752.821525] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[201752.821529] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[201752.859128] usb 1-8: driver API: 1.9.4 2011-08-15 [1-1]
[201752.859138] usb 1-8: firmware API: 1.9.4 2011-06-30
[201752.859144] usb 1-8: Unprotected firmware image.
[201753.213300] ath: EEPROM regdomain: 0x809c
[201753.213305] ath: EEPROM indicates we should expect a country code
[201753.213309] ath: doing EEPROM country->regdmn map search
[201753.213313] ath: country maps to regdmn code: 0x52
[201753.213317] ath: Country alpha2 being used: CN
[201753.213320] ath: Regpair used: 0x52
[201753.213326] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[201753.213332] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[201753.213337] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[201753.213342] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[201753.213346] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[201753.213351] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[201753.213355] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[201753.213360] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[201753.213364] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[201753.213369] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[201753.213378] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[201753.213382] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[201753.213385] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[201753.213390] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[201753.213393] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[201753.213397] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[201753.213400] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[201753.213404] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[201753.213408] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[201753.213412] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[201753.213415] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[201753.213419] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[201753.213422] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel
[201753.213426] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel
[201753.213430] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[201753.213504] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[201753.213511] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[201753.213517] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[201753.213523] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[201753.213529] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[201753.213535] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[201753.213541] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[201753.213548] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[201753.213553] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[201753.213559] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[201753.213565] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[201753.213571] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[201753.213576] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[201753.213583] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[201753.213588] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[201753.213594] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[201753.213599] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[201753.213606] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[201753.213611] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[201753.213617] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[201753.213622] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[201753.213629] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[201753.213634] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[201753.213641] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[201753.213647] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[201753.213653] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[201753.213659] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[201753.213665] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[201753.545603] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[201753.547541] cfg80211: Calling CRDA for country: CN
[201753.548638] Registered led device: carl9170-phy0::tx
[201753.548760] input: phy0 WPS Button as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/ieee80211/phy0/input9
[201753.550409] usb 1-8: Atheros AR9170 is registered as 'phy0'
[201753.558440] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[201753.558446] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[201753.558450] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[201753.558454] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[201753.558458] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[201753.558462] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[201753.558465] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[201753.558469] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[201753.558473] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[201753.558477] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[201753.558480] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[201753.558484] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[201753.558488] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[201753.558492] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[201753.558495] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[201753.558499] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[201753.558502] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[201753.558506] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[201753.558510] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[201753.558514] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[201753.558517] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[201753.558521] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[201753.558525] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[201753.558529] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[201753.558532] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[201753.558536] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[201753.558539] cfg80211: Disabling freq 2484 MHz
[201753.558545] cfg80211: Regulatory domain changed to country: CN
[201753.558548] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[201753.558552] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[201753.558555] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[201754.696600] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[201754.697227] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[201759.654045] wlan0: authenticate with 98:fc:11:90:59:c0 (try 1)
[201759.655678] wlan0: authenticated
[201759.775857] wlan0: associate with 98:fc:11:90:59:c0 (try 1)
[201759.780483] wlan0: RX AssocResp from 98:fc:11:90:59:c0 (capab=0x411 status=0 aid=1)
[201759.780492] wlan0: associated
[201759.885203] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[201771.680025] wlan0: no IPv6 routers present
[201771.880910] ieee80211 phy0: rx stream does not start with a first_mpdu frame tag.
[201772.687913] ieee80211 phy0: rx stream does not start with a first_mpdu frame tag.
[201772.688413] ieee80211 phy0: rx stream does not start with a first_mpdu frame tag.
Bookmarks