Results 1 to 3 of 3

Thread: RAID 6 installation - Did I do it right?

  1. #1
    Join Date
    Oct 2012
    Beans
    3

    RAID 6 installation - Did I do it right?

    Before my installation of 12.04 server I read a lot on the forum about raid install and problems with Grub not being able to boot from anything other than a raid 1 array. However I had no problem at all with installation on a raid 6 array (5 disks) using mdadm.

    What I did using Alternate 12.04 CD:

    1. Choose Manual partion
    2. Wipe all 5 drives
    3. Assign all drives to a Raid 6 array
    4. Create a LVM volume group and assign the the raid 6 array to this group
    5. Create the three volumes; boot, swap and /
    6. installed Grub (Grub2)

    It boots up without any problems. It seems to good to be true, did I forgot anything?

  2. #2
    Join Date
    Nov 2009
    Location
    Mataro, Spain
    Beans
    12,752
    Distro
    Ubuntu 14.04 Trusty Tahr

    Re: RAID 6 installation - Did I do it right?

    No, it seems right.

    Most raid problems with grub are affecting fakeraid it seems, not software raid (mdadm). On top of that, since the live cd can see the fakeraid, people keep using it to install despite the recommendation to use the alternate cd for raid.

    The alternate installs grub on fakeraid almost always without problems, but the live cd fails to do this.
    Darko.
    -----------------------------------------------------------------------
    Ubuntu 14.04 LTS 64bit & Windows 10 Pro 64bit

  3. #3
    Join Date
    Oct 2012
    Beans
    3

    Re: RAID 6 installation - Did I do it right?

    Thanks!

    I'll have another go tonight with a 12.04 installation on a raid 1 + raid 5 combo on another HP n36L.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •