Just in case it helps, here's what lspci -k spit out:
Code:
00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller
Subsystem: ASUSTeK Computer Inc. Device 83ac
Kernel driver in use: i915
Kernel modules: i915
00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller
Subsystem: ASUSTeK Computer Inc. Device 83ac
And here's what hwinfo spit out:
Code:
12: PCI 02.0: 0300 VGA compatible controller (VGA)
[Created at pci.318]
Unique ID: _Znp.Opejx8JdAT0
SysFS ID: /devices/pci0000:00/0000:00:02.0
SysFS BusID: 0000:00:02.0
Hardware Class: graphics card
Model: "Intel VGA compatible controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0xa011
SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
SubDevice: pci 0x83ac
Driver: "i915"
Driver Modules: "drm"
Memory Range: 0xf7e00000-0xf7e7ffff (rw,non-prefetchable)
I/O Ports: 0xdc00-0xdc07 (rw)
Memory Range: 0xd0000000-0xdfffffff (ro,non-prefetchable)
Memory Range: 0xf7d00000-0xf7dfffff (rw,non-prefetchable)
IRQ: 44 (46252 events)
Module Alias: "pci:v00008086d0000A011sv00001043sd000083ACbc03sc00i00"
Driver Info #0:
Driver Status: i915 is active
Driver Activation Cmd: "modprobe i915"
Config Status: cfg=new, avail=yes, need=no, active=unknown
13: PCI 02.1: 0380 Display controller
[Created at pci.318]
Unique ID: ruGf.vF0Mr_bHS46
SysFS ID: /devices/pci0000:00/0000:00:02.1
SysFS BusID: 0000:00:02.1
Hardware Class: graphics card
Model: "Intel Display controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0xa012
SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
SubDevice: pci 0x83ac
Memory Range: 0xf7e80000-0xf7efffff (rw,non-prefetchable)
Module Alias: "pci:v00008086d0000A012sv00001043sd000083ACbc03sc80i00"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Bookmarks