Battery not present, AC Adapter not plugged in

[Noor1101]

Hi, I'm wondering if someone can help me with this problem.

On Ubuntu 12.04 (32 bit) I installed kde-plasma a couple of days ago because I wasn't happy with Gnome/Unity. After adjusting the system tray settings so that it always shows the battery status, this worked fine for a couple of days.

However, since I logged in this morning, the battery icon is an empty battery without a plug and with a red cross in front of it. When I click it, the status reads "Battery: Not present. AC Adapter: Not plugged in." (I have rebooted a couple of times but that's not fixed the problem.)

I searched for some answers online, and in Terminal/Konsole tried

cat /proc/acpi/battery/BAT1/state

and

cat /proc/acpi/battery/BAT1/info

and the - very short - reply to this reads:

noor@noor-EasyNote-MH35:~$ cat /proc/acpi/battery/BAT1/state
present:                 no
noor@noor-EasyNote-MH35:~$ cat /proc/acpi/battery/BAT1/info
present:                 no

This is the reason why I'm starting this thread: I haven't come across it in any other forums/guides.

The battery definitely works because I can unplug it and the notebook keeps running, and the power supply definitely works because.. well I'm still online, aren't I?

Please note I've been using Linux/Ubuntu for only 1.5 months and I still find myself confused with certain terms. I'm eager to learn though!

Can anyone help me?
Thanks very much!

[NikTh]

Hi ,
With battery plugged
is there any other entries inside /battery ?

ls /proc/acpi/battery/

Also try this

sudo apt-get install acpi 
acpi -V

Thanks

[Noor1101]

Thanks for your time!
No other batteries were found:

noor@noor-EasyNote-MH35:~$ ls /proc/acpi/battery/
BAT1
noor@noor-EasyNote-MH35:~$

I succesfully installed acpi, like you said:

noor@noor-EasyNote-MH35:~$ sudo apt-get install acpi 
[sudo] password for noor: 
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following packages were automatically installed and are no longer required:
  linux-headers-3.2.0-29 linux-headers-3.2.0-29-generic-pae libkdecorations4 libkwinglutils1
  wine-gecko1.4 libkwineffects1abi3
Use 'apt-get autoremove' to remove them.
The following NEW packages will be installed:
  acpi
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 13.3 kB of archives.
After this operation, 70.7 kB of additional disk space will be used.
Get:1 http://archive.ubuntu.com/ubuntu/ precise/universe acpi i386 1.6-1 [13.3 kB]
Fetched 13.3 kB in 0s (55.2 kB/s)
Selecting previously unselected package acpi.
(Reading database ... 241690 files and directories currently installed.)
Unpacking acpi (from .../archives/acpi_1.6-1_i386.deb) ...
Processing triggers for man-db ...
Setting up acpi (1.6-1) ...

And this is what I got with acpi -V:

noor@noor-EasyNote-MH35:~$ acpi -V
Adapter 0: off-line
Thermal 0: ok, 51.0 degrees C
Thermal 0: trip point 0 switches to mode critical at temperature 100.0 degrees C
Thermal 0: trip point 1 switches to mode passive at temperature 90.0 degrees C
Thermal 0: trip point 2 switches to mode active at temperature 60.0 degrees C
Cooling 0: LCD 0 of 7
Cooling 1: Processor 0 of 10
Cooling 2: Processor 0 of 10
Cooling 3: Fan 0 of 1
noor@noor-EasyNote-MH35:~$

[NikTh]

No , battery present. Weird.

Try to reset you BIOS. I mean "Restore Defaults" settings.

Also a good point would be the output of dmesg.

dmesg >> dmesg.txt

and with the text editor of Kubuntu , open it and copy-paste everything in here , between [code] brackets. You know [code]Here[/code]

[Noor1101]

Just to be sure, do you mean I should shut down my computer, turn it on, go to BIOS and search for "Restore Default" there? (And, again to be absolutely sure, by that I won't lose any data?)
(Sorry, I just want to be careful - don't really know what I'm doing half the time)


The dmesg.txt-file is as follows:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-31-generic-pae (buildd@roseapple) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #50-Ubuntu SMP Fri Sep 7 16:39:45 UTC 2012 (Ubuntu 3.2.0-31.50-generic-pae 3.2.28)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[    0.000000]  BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000b7d90000 (usable)
[    0.000000]  BIOS-e820: 00000000b7d90000 - 00000000b7da0000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000b7da0000 - 00000000b7da1000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000b7da1000 - 00000000b8000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI present.
[    0.000000] DMI: PACKARD BELL BV EasyNote MH35/PE1, BIOS PE14A04  02/22/2008
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0xb7d90 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FE0000000 write-back
[    0.000000]   2 base 0A0000000 mask FF0000000 write-back
[    0.000000]   3 base 0B0000000 mask FF8000000 write-back
[    0.000000]   4 base 0B7E00000 mask FFFE00000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 512MB, type WB
[    0.000000] reg 2, base: 2560MB, range: 256MB, type WB
[    0.000000] reg 3, base: 2816MB, range: 128MB, type WB
[    0.000000] reg 4, base: 2942MB, range: 2MB, type UC
[    0.000000] total RAM covered: 2942M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K     chunk_size: 256M     num_reg: 4      lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 2942MB, range: 2MB, type UC
[    0.000000] reg 3, base: 2944MB, range: 128MB, type UC
[    0.000000] found SMP MP-table at [c00f86c0] f86c0
[    0.000000] initial memory mapped : 0 - 02000000
[    0.000000] Base memory trampoline at [c0099000] 99000 size 16384
[    0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000
[    0.000000]  0000000000 - 0000200000 page 4k
[    0.000000]  0000200000 - 0037a00000 page 2M
[    0.000000]  0037a00000 - 0037bfe000 page 4k
[    0.000000] kernel direct mapping tables up to 37bfe000 @ 1ffb000-2000000
[    0.000000] RAMDISK: 364e8000 - 3726c000
[    0.000000] ACPI: RSDP 000f8690 00024 (v02 PTLTD )
[    0.000000] ACPI: XSDT b7d97999 00094 (v01 PacBel PBNB000B 06040000  LTP 00000000)
[    0.000000] ACPI: FACP b7d9fcc4 000F4 (v03 SiS    671MX    06040000 PTL  000F4240)
[    0.000000] ACPI: DSDT b7d9b9c6 0428A (v01 PTLTD       671 06040000 MSFT 03000001)
[    0.000000] ACPI: FACS b7da0fc0 00040
[    0.000000] ACPI: SLIC b7d9fdb8 00176 (v00 PacBel PBNB000B 06040000      00000000)
[    0.000000] ACPI: APIC b7d9ff2e 0005E (v01 PTLTD  ? APIC   06040000  LTP 00000000)
[    0.000000] ACPI: MCFG b7d9ff8c 0003C (v01 PTLTD    MCFG   06040000  LTP 00000000)
[    0.000000] ACPI: HPET b7d9ffc8 00038 (v01 PTLTD  HPETTBL  06040000  LTP 00000001)
[    0.000000] ACPI: SSDT b7d992d1 0025F (v01  PmRef  Cpu0Tst 00003000 INTL 20050228)
[    0.000000] ACPI: SSDT b7d9922b 000A6 (v01  PmRef  Cpu7Tst 00003000 INTL 20050228)
[    0.000000] ACPI: SSDT b7d99185 000A6 (v01  PmRef  Cpu6Tst 00003000 INTL 20050228)
[    0.000000] ACPI: SSDT b7d990df 000A6 (v01  PmRef  Cpu5Tst 00003000 INTL 20050228)
[    0.000000] ACPI: SSDT b7d99039 000A6 (v01  PmRef  Cpu4Tst 00003000 INTL 20050228)
[    0.000000] ACPI: SSDT b7d98f93 000A6 (v01  PmRef  Cpu3Tst 00003000 INTL 20050228)
[    0.000000] ACPI: SSDT b7d98eed 000A6 (v01  PmRef  Cpu2Tst 00003000 INTL 20050228)
[    0.000000] ACPI: SSDT b7d98e47 000A6 (v01  PmRef  Cpu1Tst 00003000 INTL 20050228)
[    0.000000] ACPI: SSDT b7d97a2d 0141A (v01  PmRef    CpuPm 00003000 INTL 20050228)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 2049MB HIGHMEM available.
[    0.000000] 891MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 37bfe000
[    0.000000]   low ram: 0 - 37bfe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x00037bfe
[    0.000000]   HighMem  0x00037bfe -> 0x000b7d90
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009d
[    0.000000]     0: 0x00000100 -> 0x000b7d90
[    0.000000] On node 0 totalpages: 752925
[    0.000000] free_area_init_node: node 0, pgdat c1868a80, node_mem_map f4de8200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3949 pages, LIFO batch:0
[    0.000000]   Normal zone: 1752 pages used for memmap
[    0.000000]   Normal zone: 222502 pages, LIFO batch:31
[    0.000000]   HighMem zone: 4100 pages used for memmap
[    0.000000]   HighMem zone: 520590 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x8008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10398201 base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[    0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[    0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000e4000
[    0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at b8000000 (gap: b8000000:28000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f7bcf000 s34240 r0 d23104 u57344
[    0.000000] pcpu-alloc: s34240 r0 d23104 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 747041
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-31-generic-pae root=UUID=9b3867fe-5b6d-419c-98c6-e571f5a57d0a ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 12048384 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (00037bfe:000b7d90)
[    0.000000] Memory: 2951184k/3012160k available (5818k kernel code, 60516k reserved, 2846k data, 740k init, 2098760k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
[    0.000000]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
[    0.000000]       .init : 0xc1877000 - 0xc1930000   ( 740 kB)
[    0.000000]       .data : 0xc15ae8bc - 0xc1876280   (2846 kB)
[    0.000000]       .text : 0xc1000000 - 0xc15ae8bc   (5818 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:2304 nr_irqs:512 16
[    0.000000] CPU 0 irqstacks, hard=f7408000 soft=f740a000
[    0.000000] Extended CMOS year: 2000
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1831.780 MHz processor.
[    0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3663.56 BogoMIPS (lpj=7327120)
[    0.004015] pid_max: default: 32768 minimum: 301
[    0.004060] Security Framework initialized
[    0.004096] AppArmor: AppArmor initialized
[    0.004100] Yama: becoming mindful.
[    0.004220] Mount-cache hash table entries: 512
[    0.004508] Initializing cgroup subsys cpuacct
[    0.004521] Initializing cgroup subsys memory
[    0.004538] Initializing cgroup subsys devices
[    0.004543] Initializing cgroup subsys freezer
[    0.004548] Initializing cgroup subsys blkio
[    0.004562] Initializing cgroup subsys perf_event
[    0.004619] CPU: Physical Processor ID: 0
[    0.004623] CPU: Processor Core ID: 0
[    0.004630] mce: CPU supports 6 MCE banks
[    0.004647] CPU0: Thermal monitoring enabled (TM2)
[    0.004654] using mwait in idle threads.
[    0.010859] ACPI: Core revision 20110623
[    0.020051] ftrace: allocating 26555 entries in 52 pages
[    0.024097] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.024436] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.065234] CPU0: Intel(R) Core(TM)2 Duo CPU     T5550  @ 1.83GHz stepping 0d
[    0.068003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[    0.068003] PEBS disabled due to CPU errata.
[    0.068003] ... version:                2
[    0.068003] ... bit width:              40
[    0.068003] ... generic registers:      2
[    0.068003] ... value mask:             000000ffffffffff
[    0.068003] ... max period:             000000007fffffff
[    0.068003] ... fixed-purpose events:   3
[    0.068003] ... event mask:             0000000700000003
[    0.068003] NMI watchdog enabled, takes one hw-pmu counter.
[    0.068003] CPU 1 irqstacks, hard=f74cc000 soft=f74ce000
[    0.068003] Booting Node   0, Processors  #1 Ok.
[    0.068003] smpboot cpu 1: start_ip = 99000
[    0.008000] Initializing CPU#1
[    0.156060] NMI watchdog enabled, takes one hw-pmu counter.
[    0.156133] Brought up 2 CPUs
[    0.156139] Total of 2 processors activated (7327.36 BogoMIPS).
[    0.158831] devtmpfs: initialized
[    0.158831] EVM: security.selinux
[    0.158831] EVM: security.SMACK64
[    0.158831] EVM: security.capability
[    0.158831] PM: Registering ACPI NVS region at b7da0000 (4096 bytes)
[    0.161923] print_constraints: dummy: 
[    0.161969] RTC time: 17:15:22, date: 10/04/12
[    0.162054] NET: Registered protocol family 16
[    0.162206] Trying to unpack rootfs image as initramfs...
[    0.162347] EISA bus registered
[    0.162380] ACPI: bus type pci registered
[    0.162528] PCI: MMCONFIG for domain 0000 [bus 00-02] at [mem 0xe0000000-0xe02fffff] (base 0xe0000000)
[    0.162536] PCI: MMCONFIG at [mem 0xe0000000-0xe02fffff] reserved in E820
[    0.162540] PCI: Using MMCONFIG for extended config space
[    0.162544] PCI: Using configuration type 1 for base access
[    0.176162] bio: create slab <bio-0> at 0
[    0.176349] ACPI: Added _OSI(Module Device)
[    0.176355] ACPI: Added _OSI(Processor Device)
[    0.176360] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.176365] ACPI: Added _OSI(Processor Aggregator Device)
[    0.178465] ACPI: EC: Look up EC in DSDT
[    0.185428] ACPI: SSDT b7d99deb 0021F (v01  PmRef  Cpu0Ist 00003000 INTL 20050228)
[    0.185983] ACPI: Dynamic OEM Table Load:
[    0.185991] ACPI: SSDT   (null) 0021F (v01  PmRef  Cpu0Ist 00003000 INTL 20050228)
[    0.188053] ACPI: SSDT b7d99530 00518 (v01  PmRef  Cpu0Cst 00003001 INTL 20050228)
[    0.188683] ACPI: Dynamic OEM Table Load:
[    0.188691] ACPI: SSDT   (null) 00518 (v01  PmRef  Cpu0Cst 00003001 INTL 20050228)
[    0.232977] ACPI: SSDT b7d9a00a 001B0 (v01  PmRef  Cpu1Ist 00003000 INTL 20050228)
[    0.233550] ACPI: Dynamic OEM Table Load:
[    0.233558] ACPI: SSDT   (null) 001B0 (v01  PmRef  Cpu1Ist 00003000 INTL 20050228)
[    0.234089] ACPI: SSDT b7d99a48 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20050228)
[    0.234615] ACPI: Dynamic OEM Table Load:
[    0.234623] ACPI: SSDT   (null) 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20050228)
[    0.264561] ACPI: Interpreter enabled
[    0.264592] ACPI: (supports S0 S1 S3 S4 S5)
[    0.264638] ACPI: Using IOAPIC for interrupt routing
[    0.268775] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    0.271952] ACPI: Power Resource [QFAN] (off)
[    0.272396] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
[    0.272677] ACPI: No dock devices found.
[    0.272683] HEST: Table not found.
[    0.272696] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.273464] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.274872] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
[    0.274879] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
[    0.274885] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.274891] pci_root PNP0A03:00: host bridge window [mem 0xb8000000-0xffedffff]
[    0.274897] pci_root PNP0A03:00: host bridge window [mem 0x000c4000-0x000c7fff]
[    0.274904] pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff]
[    0.274909] pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff]
[    0.274915] pci_root PNP0A03:00: host bridge window [mem 0x000dc000-0x000dffff]
[    0.274921] pci_root PNP0A03:00: host bridge window [mem 0x000e0000-0x000e3fff]
[    0.274958] pci 0000:00:00.0: [1039:0671] type 0 class 0x000600
[    0.274980] pci 0000:00:00.0: reg 10: [mem 0xd0000000-0xd3ffffff]
[    0.275086] pci 0000:00:01.0: [1039:0003] type 1 class 0x000604
[    0.275154] pci 0000:00:02.0: [1039:0968] type 0 class 0x000601
[    0.275295] pci 0000:00:02.5: [1039:5513] type 0 class 0x000101
[    0.275325] pci 0000:00:02.5: reg 10: [io  0x01f0-0x01f7]
[    0.275342] pci 0000:00:02.5: reg 14: [io  0x03f4-0x03f7]
[    0.275359] pci 0000:00:02.5: reg 18: [io  0x0170-0x0177]
[    0.275376] pci 0000:00:02.5: reg 1c: [io  0x0374-0x0377]
[    0.275393] pci 0000:00:02.5: reg 20: [io  0x1080-0x108f]
[    0.275464] pci 0000:00:02.5: PME# supported from D3cold
[    0.275473] pci 0000:00:02.5: PME# disabled
[    0.275500] pci 0000:00:03.0: [1039:7001] type 0 class 0x000c03
[    0.275523] pci 0000:00:03.0: reg 10: [mem 0xd4104000-0xd4104fff]
[    0.275624] pci 0000:00:03.1: [1039:7001] type 0 class 0x000c03
[    0.275647] pci 0000:00:03.1: reg 10: [mem 0xd4105000-0xd4105fff]
[    0.275755] pci 0000:00:03.3: [1039:7002] type 0 class 0x000c03
[    0.275782] pci 0000:00:03.3: reg 10: [mem 0xd4106000-0xd4106fff]
[    0.275897] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
[    0.275905] pci 0000:00:03.3: PME# disabled
[    0.275941] pci 0000:00:04.0: [1039:0191] type 0 class 0x000200
[    0.275968] pci 0000:00:04.0: reg 10: [mem 0xd4307000-0xd430707f]
[    0.275985] pci 0000:00:04.0: reg 14: [io  0x1000-0x107f]
[    0.276103] pci 0000:00:04.0: supports D1 D2
[    0.276108] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.276116] pci 0000:00:04.0: PME# disabled
[    0.276145] pci 0000:00:05.0: [1039:1183] type 0 class 0x000101
[    0.276173] pci 0000:00:05.0: reg 10: [io  0x10c8-0x10cf]
[    0.276190] pci 0000:00:05.0: reg 14: [io  0x10bc-0x10bf]
[    0.276207] pci 0000:00:05.0: reg 18: [io  0x10c0-0x10c7]
[    0.276223] pci 0000:00:05.0: reg 1c: [io  0x10b8-0x10bb]
[    0.276240] pci 0000:00:05.0: reg 20: [io  0x10a0-0x10af]
[    0.276309] pci 0000:00:05.0: PME# supported from D3cold
[    0.276317] pci 0000:00:05.0: PME# disabled
[    0.276354] pci 0000:00:06.0: [1039:000a] type 1 class 0x000604
[    0.276489] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[    0.276498] pci 0000:00:06.0: PME# disabled
[    0.276546] pci 0000:00:07.0: [1039:000a] type 1 class 0x000604
[    0.276680] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[    0.276688] pci 0000:00:07.0: PME# disabled
[    0.276742] pci 0000:00:0f.0: [1039:7502] type 0 class 0x000403
[    0.276774] pci 0000:00:0f.0: reg 10: [mem 0xd4100000-0xd4103fff]
[    0.276891] pci 0000:00:0f.0: PME# supported from D0 D3hot D3cold
[    0.276900] pci 0000:00:0f.0: PME# disabled
[    0.276980] pci 0000:01:00.0: [1039:6351] type 0 class 0x000300
[    0.277008] pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
[    0.277024] pci 0000:01:00.0: reg 14: [mem 0xd4000000-0xd401ffff]
[    0.277039] pci 0000:01:00.0: reg 18: [io  0x9000-0x907f]
[    0.277124] pci 0000:01:00.0: supports D1 D2
[    0.277188] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.277197] pci 0000:00:01.0:   bridge window [io  0x9000-0x9fff]
[    0.277206] pci 0000:00:01.0:   bridge window [mem 0xd4000000-0xd40fffff]
[    0.277214] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff pref]
[    0.277299] pci 0000:00:06.0: PCI bridge to [bus 04-05]
[    0.277311] pci 0000:00:06.0:   bridge window [io  0x3000-0x4fff]
[    0.277320] pci 0000:00:06.0:   bridge window [mem 0xdc000000-0xdfffffff]
[    0.277412] pci 0000:00:07.0: PCI bridge to [bus 03-03]
[    0.277457] pci_bus 0000:00: on NUMA node 0
[    0.277464] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.278010]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.278018]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.278022] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.287771] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 10 11)
[    0.287884] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11)
[    0.287993] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 7 9 10 11)
[    0.288110] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 7 9 10 11)
[    0.288249] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11)
[    0.288356] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11)
[    0.288463] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *7 9 10 11)
[    0.288569] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11) *0, disabled.
[    0.288886] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.288893] vgaarb: loaded
[    0.288897] vgaarb: bridge control possible 0000:01:00.0
[    0.289186] i2c-core: driver [aat2870] using legacy suspend method
[    0.289190] i2c-core: driver [aat2870] using legacy resume method
[    0.289377] SCSI subsystem initialized
[    0.289506] libata version 3.00 loaded.
[    0.289615] usbcore: registered new interface driver usbfs
[    0.289643] usbcore: registered new interface driver hub
[    0.289708] usbcore: registered new device driver usb
[    0.289922] PCI: Using ACPI for IRQ routing
[    0.289980] PCI: pci_cache_line_size set to 64 bytes
[    0.290092] reserve RAM buffer: 000000000009dc00 - 000000000009ffff 
[    0.290098] reserve RAM buffer: 00000000b7d90000 - 00000000b7ffffff 
[    0.290342] NetLabel: Initializing
[    0.290347] NetLabel:  domain hash size = 128
[    0.290350] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.290375] NetLabel:  unlabeled traffic allowed by default
[    0.290486] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.290495] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.290506] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.296102] Switching to clocksource hpet
[    0.316279] AppArmor: AppArmor Filesystem Enabled
[    0.316346] pnp: PnP ACPI init
[    0.316389] ACPI: bus type pnp registered
[    0.317207] pnp 00:00: [bus 00-ff]
[    0.317214] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.317220] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.317226] pnp 00:00: [io  0x0d00-0xffff window]
[    0.317232] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.317238] pnp 00:00: [mem 0xb8000000-0xffedffff window]
[    0.317243] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.317249] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.317255] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.317260] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.317266] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.317271] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.317276] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.317282] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.317287] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.317292] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.317298] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.317303] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.317434] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.317789] pnp 00:01: [io  0x0000-0x000f]
[    0.317794] pnp 00:01: [io  0x0081-0x008f]
[    0.317799] pnp 00:01: [io  0x00c0-0x00df]
[    0.317804] pnp 00:01: [io  0x0480-0x048f]
[    0.317810] pnp 00:01: [dma 4]
[    0.317903] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.317964] pnp 00:02: [io  0x0070-0x0071]
[    0.318053] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.318075] pnp 00:03: [io  0x0061]
[    0.318159] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.318252] pnp 00:04: [io  0x8000-0x80be]
[    0.318258] pnp 00:04: [io  0x8100-0x812f]
[    0.318263] pnp 00:04: [io  0x0080]
[    0.318267] pnp 00:04: [io  0x04d0-0x04d1]
[    0.318272] pnp 00:04: [io  0xfe00]
[    0.318276] pnp 00:04: [io  0x002e]
[    0.318281] pnp 00:04: [io  0x002f]
[    0.318285] pnp 00:04: [io  0x0092]
[    0.318289] pnp 00:04: [io  0x0072-0x0073]
[    0.318294] pnp 00:04: [io  0x0078-0x0079]
[    0.318299] pnp 00:04: [io  0x0290-0x0297]
[    0.318304] pnp 00:04: [mem 0xe0000000-0xefffffff]
[    0.318309] pnp 00:04: [mem 0xfec00000-0xfeefffff]
[    0.318314] pnp 00:04: [mem 0xffb80000-0xffbfffff]
[    0.318319] pnp 00:04: [mem 0xffc00000-0xffc00fff]
[    0.318324] pnp 00:04: [mem 0xffe00000-0xffe00fff]
[    0.318329] pnp 00:04: [mem 0xffe80000-0xffefffff]
[    0.318485] system 00:04: [io  0x8000-0x80be] has been reserved
[    0.318492] system 00:04: [io  0x8100-0x812f] has been reserved
[    0.318500] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.318511] system 00:04: [io  0xfe00] has been reserved
[    0.318517] system 00:04: [io  0x0290-0x0297] has been reserved
[    0.318526] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[    0.318533] system 00:04: [mem 0xfec00000-0xfeefffff] could not be reserved
[    0.318540] system 00:04: [mem 0xffb80000-0xffbfffff] has been reserved
[    0.318546] system 00:04: [mem 0xffc00000-0xffc00fff] has been reserved
[    0.318553] system 00:04: [mem 0xffe00000-0xffe00fff] has been reserved
[    0.318559] system 00:04: [mem 0xffe80000-0xffefffff] could not be reserved
[    0.318568] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.318616] pnp 00:05: [io  0x00f0-0x00ff]
[    0.318647] pnp 00:05: [irq 13]
[    0.318736] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.318760] pnp 00:06: [mem 0xfec00000-0xfecfffff]
[    0.318765] pnp 00:06: [mem 0xfee00000-0xfeefffff]
[    0.318770] pnp 00:06: [mem 0xffc00000-0xffc00fff]
[    0.318775] pnp 00:06: [mem 0xffe00000-0xffe00fff]
[    0.318863] pnp 00:06: Plug and Play ACPI device, IDs PNP0003 (active)
[    0.319013] pnp 00:07: [irq 0 disabled]
[    0.319024] pnp 00:07: [irq 8]
[    0.319035] pnp 00:07: [mem 0xfed00000-0xfed003ff]
[    0.319136] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.319160] pnp 00:08: [io  0x0060]
[    0.319165] pnp 00:08: [io  0x0064]
[    0.319176] pnp 00:08: [irq 1]
[    0.319267] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.319294] pnp 00:09: [irq 12]
[    0.319392] pnp 00:09: Plug and Play ACPI device, IDs SYN101f PNP0f13 (active)
[    0.319718] pnp: PnP ACPI: found 10 devices
[    0.319723] ACPI: ACPI bus type pnp unregistered
[    0.319731] PnPBIOS: Disabled by ACPI PNP
[    0.358651] PCI: max bus depth: 1 pci_try_num: 2
[    0.358719] pci 0000:00:06.0: BAR 15: assigned [mem 0xb8000000-0xb81fffff 64bit pref]
[    0.358727] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.358734] pci 0000:00:01.0:   bridge window [io  0x9000-0x9fff]
[    0.358745] pci 0000:00:01.0:   bridge window [mem 0xd4000000-0xd40fffff]
[    0.358753] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff pref]
[    0.358766] pci 0000:00:06.0: PCI bridge to [bus 04-05]
[    0.358772] pci 0000:00:06.0:   bridge window [io  0x3000-0x4fff]
[    0.358782] pci 0000:00:06.0:   bridge window [mem 0xdc000000-0xdfffffff]
[    0.358791] pci 0000:00:06.0:   bridge window [mem 0xb8000000-0xb81fffff 64bit pref]
[    0.358804] pci 0000:00:07.0: PCI bridge to [bus 03-03]
[    0.358841] pci 0000:00:01.0: setting latency timer to 64
[    0.358879] pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.358888] pci 0000:00:06.0: setting latency timer to 64
[    0.358901] pci 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.358910] pci 0000:00:07.0: setting latency timer to 64
[    0.358919] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.358925] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.358931] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.358936] pci_bus 0000:00: resource 7 [mem 0xb8000000-0xffedffff]
[    0.358942] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[    0.358947] pci_bus 0000:00: resource 9 [mem 0x000d4000-0x000d7fff]
[    0.358953] pci_bus 0000:00: resource 10 [mem 0x000d8000-0x000dbfff]
[    0.358958] pci_bus 0000:00: resource 11 [mem 0x000dc000-0x000dffff]
[    0.358964] pci_bus 0000:00: resource 12 [mem 0x000e0000-0x000e3fff]
[    0.358970] pci_bus 0000:01: resource 0 [io  0x9000-0x9fff]
[    0.358975] pci_bus 0000:01: resource 1 [mem 0xd4000000-0xd40fffff]
[    0.358981] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff pref]
[    0.358987] pci_bus 0000:04: resource 0 [io  0x3000-0x4fff]
[    0.358992] pci_bus 0000:04: resource 1 [mem 0xdc000000-0xdfffffff]
[    0.358998] pci_bus 0000:04: resource 2 [mem 0xb8000000-0xb81fffff 64bit pref]
[    0.359096] NET: Registered protocol family 2
[    0.359266] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.359812] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.360767] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.361244] TCP: Hash tables configured (established 131072 bind 65536)
[    0.361249] TCP reno registered
[    0.361256] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.361274] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.361458] NET: Registered protocol family 1
[    0.361552] pci 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.416066] pci 0000:00:03.0: PCI INT A disabled
[    0.416118] pci 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.472061] pci 0000:00:03.1: PCI INT B disabled
[    0.472107] pci 0000:00:03.3: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    0.472139] pci 0000:00:03.3: PCI INT C disabled
[    0.472173] pci 0000:01:00.0: Boot video device
[    0.472180] PCI: CLS 16 bytes, default 64
[    0.472946] audit: initializing netlink socket (disabled)
[    0.472971] type=2000 audit(1349370922.468:1): initialized
[    0.521817] highmem bounce pool size: 64 pages
[    0.521830] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.526857] VFS: Disk quotas dquot_6.5.2
[    0.527003] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.528320] fuse init (API version 7.17)
[    0.528543] msgmni has been set to 1664
[    0.529261] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.529323] io scheduler noop registered
[    0.529328] io scheduler deadline registered
[    0.529344] io scheduler cfq registered (default)
[    0.529780] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.529840] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.530031] intel_idle: MWAIT substates: 0x22220
[    0.530036] intel_idle: does not run on family 6 model 15
[    0.530181] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.530297] ACPI: AC Adapter [ACAD] (off-line)
[    0.530458] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    0.530833] ACPI: Lid Switch [LID0]
[    0.530941] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    0.530951] ACPI: Power Button [PWRB]
[    0.531049] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.531057] ACPI: Power Button [PWRF]
[    0.531193] ACPI: Fan [FAN] (off)
[    0.548380] Monitor-Mwait will be used to enter C-1 state
[    0.548447] Monitor-Mwait will be used to enter C-2 state
[    0.556311] Monitor-Mwait will be used to enter C-3 state
[    0.556330] Marking TSC unstable due to TSC halts in idle
[    0.556354] ACPI: acpi_idle registered with cpuidle
[    0.562652] thermal LNXTHERM:00: registered as thermal_zone0
[    0.562659] ACPI: Thermal Zone [THRM] (53 C)
[    0.562718] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.562743] ACPI: Battery Slot [BAT1] (battery absent)
[    0.562838] ERST: Table is not found!
[    0.562842] GHES: HEST is not enabled!
[    0.563029] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.563606] ACPI: Battery Slot [BAT1] (battery absent)
[    0.563625] isapnp: Scanning for PnP cards...
[    0.826472] Freeing initrd memory: 13840k freed
[    0.918169] isapnp: No Plug & Play device found
[    0.964889] Linux agpgart interface v0.103
[    0.968582] brd: module loaded
[    0.970430] loop: module loaded
[    0.970863] pata_sis 0000:00:02.5: version 0.5.2
[    0.970894] pata_sis 0000:00:02.5: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.971713] scsi0 : pata_sis
[    0.971898] scsi1 : pata_sis
[    0.972495] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1080 irq 14
[    0.972501] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1088 irq 15
[    0.972609] pata_acpi 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.972684] pata_acpi 0000:00:05.0: PCI INT A disabled
[    0.973512] Fixed MDIO Bus: probed
[    0.973565] tun: Universal TUN/TAP device driver, 1.6
[    0.973571] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.973688] PPP generic driver version 2.4.2
[    0.973917] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.973952] ehci_hcd 0000:00:03.3: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    0.973979] ehci_hcd 0000:00:03.3: EHCI Host Controller
[    0.974076] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
[    0.974120] ehci_hcd 0000:00:03.3: cache line size of 16 is not supported
[    0.974153] ehci_hcd 0000:00:03.3: irq 22, io mem 0xd4106000
[    0.984029] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00
[    0.984355] hub 1-0:1.0: USB hub found
[    0.984365] hub 1-0:1.0: 8 ports detected
[    0.984532] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.984561] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.984589] ohci_hcd 0000:00:03.0: OHCI Host Controller
[    0.984684] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
[    0.984722] ohci_hcd 0000:00:03.0: irq 20, io mem 0xd4104000
[    1.046255] hub 2-0:1.0: USB hub found
[    1.046266] hub 2-0:1.0: 4 ports detected
[    1.046401] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    1.046422] ohci_hcd 0000:00:03.1: OHCI Host Controller
[    1.046530] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
[    1.046567] ohci_hcd 0000:00:03.1: irq 21, io mem 0xd4105000
[    1.102267] hub 3-0:1.0: USB hub found
[    1.102278] hub 3-0:1.0: 4 ports detected
[    1.102427] uhci_hcd: USB Universal Host Controller Interface driver
[    1.102558] usbcore: registered new interface driver libusual
[    1.102665] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[    1.106579] i8042: Detected active multiplexing controller, rev 1.1
[    1.108058] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.108070] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.108146] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.108207] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.108274] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.108548] mousedev: PS/2 mouse device common for all mice
[    1.108943] rtc_cmos 00:02: RTC can wake from S4
[    1.109145] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.109176] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    1.109306] device-mapper: uevent: version 1.0.3
[    1.109472] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    1.109550] EISA: Probing bus 0 at eisa.0
[    1.109556] EISA: Cannot allocate resource for mainboard
[    1.109561] Cannot allocate resource for EISA slot 1
[    1.109565] Cannot allocate resource for EISA slot 2
[    1.109570] Cannot allocate resource for EISA slot 3
[    1.109574] Cannot allocate resource for EISA slot 4
[    1.109578] Cannot allocate resource for EISA slot 5
[    1.109582] Cannot allocate resource for EISA slot 6
[    1.109586] Cannot allocate resource for EISA slot 7
[    1.109590] Cannot allocate resource for EISA slot 8
[    1.109594] EISA: Detected 0 cards.
[    1.109614] cpufreq-nforce2: No nForce2 chipset.
[    1.109759] cpuidle: using governor ladder
[    1.109996] cpuidle: using governor menu
[    1.110001] EFI Variables Facility v0.08 2004-May-17
[    1.110625] TCP cubic registered
[    1.110912] NET: Registered protocol family 10
[    1.112311] NET: Registered protocol family 17
[    1.112322] Registering the dns_resolver key type
[    1.112373] Using IPI No-Shortcut mode
[    1.112650] PM: Hibernation image not present or could not be loaded.
[    1.112680] registered taskstats version 1
[    1.127607]   Magic number: 0:846:288
[    1.127674] tty tty21: hash matches
[    1.127760] rtc_cmos 00:02: setting system clock to 2012-10-04 17:15:23 UTC (1349370923)
[    1.128492] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.128495] EDD information not available.
[    1.136312] ata1.00: ATAPI: MATSHITADVD-RAM UJ870PC, 1.00, max UDMA/33
[    1.144558] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.152285] ata1.00: configured for UDMA/33
[    1.154721] scsi 0:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ870PC  1.00 PQ: 0 ANSI: 5
[    1.156952] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.156956] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.157128] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.157259] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    1.157363] ata2: port disabled--ignoring
[    1.157510] Freeing unused kernel memory: 740k freed
[    1.157938] Write protecting the kernel text: 5820k
[    1.157969] Write protecting the kernel read-only data: 2376k
[    1.157971] NX-protecting the kernel data: 4420k
[    1.180286] udevd[95]: starting version 175
[    1.266724] sata_sis 0000:00:05.0: version 1.0
[    1.266756] sata_sis 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.266764] sata_sis 0000:00:05.0: Detected SiS 1183/966/966L/968/680 controller in PATA mode
[    1.267439] scsi2 : sata_sis
[    1.267718] scsi3 : sata_sis
[    1.268311] ata3: PATA max UDMA/133 cmd 0x10c8 ctl 0x10bc bmdma 0x10a0 irq 17
[    1.268315] ata4: PATA max UDMA/133 cmd 0x10c0 ctl 0x10b8 bmdma 0x10a8 irq 17
[    1.271481] sis190: sis190 Gigabit Ethernet driver 1.4 loaded
[    1.271524] sis190 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    1.271539] sis190 0000:00:04.0: setting latency timer to 64
[    1.271561] sis190: 0000:00:04.0: Read MAC address from EEPROM
[    1.352039] usb 1-4: new high-speed USB device number 3 using ehci_hcd
[    1.364025] sis190: 0000:00:04.0: Realtek PHY RTL8201 transceiver at address 1
[    1.432247] ata3.00: ATA-8: ST9250827AS, 3.AAA, max UDMA/133
[    1.432251] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.448235] ata3.00: configured for UDMA/133
[    1.448429] scsi 2:0:0:0: Direct-Access     ATA      ST9250827AS      3.AA PQ: 0 ANSI: 5
[    1.448616] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    1.448656] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    1.448680] sd 2:0:0:0: [sda] Write Protect is off
[    1.448684] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.448712] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.483904]  sda: sda1 sda2 < sda5 >
[    1.484347] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.502699] usbcore: registered new interface driver uas
[    1.502968] Initializing USB Mass Storage driver...
[    1.503018] usbcore: registered new interface driver usb-storage
[    1.503020] USB Mass Storage support registered.
[    1.614781] usb 1-6: new high-speed USB device number 4 using ehci_hcd
[    1.618614] scsi4 : usb-storage 1-4:1.0
[    1.618740] usbcore: registered new interface driver ums-realtek
[    1.868053] usb 1-8: new high-speed USB device number 5 using ehci_hcd
[    1.876029] sis190: 0000:00:04.0: Using transceiver at address 1 as default
[    1.908713] sis190 0000:00:04.0: eth0: 0000:00:04.0: SiS 191 PCI Gigabit Ethernet adapter at f8412000 (IRQ: 19), 00:1e:68:24:0c:41
[    1.908717] sis190 0000:00:04.0: eth0: GMII mode.
[    1.908726] sis190 0000:00:04.0: eth0: Enabling Auto-negotiation
[    2.053657] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    2.328039] usb 2-2: new low-speed USB device number 2 using ohci_hcd
[    2.628638] scsi 4:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
[    2.629457] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    2.631989] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[   19.411871] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   19.451923] udevd[309]: starting version 175
[   19.488161] lp: driver loaded but no devices found
[   19.529271] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   19.530112] agpgart-sis 0000:00:00.0: SiS chipset [1039/0671]
[   19.537453] Adding 3010556k swap on /dev/sda5.  Priority:-1 extents:1 across:3010556k 
[   19.576076] agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xd0000000
[   19.656287] type=1400 audit(1349363742.027:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=451 comm="apparmor_parser"
[   19.657038] type=1400 audit(1349363742.027:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=451 comm="apparmor_parser"
[   19.657347] type=1400 audit(1349363742.027:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=451 comm="apparmor_parser"
[   19.740577] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   19.769357] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[   19.784285] acpi device:0e: registered as cooling_device3
[   19.784455] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:0c/LNXVIDEO:00/input/input4
[   19.786334] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   19.800572] Linux video capture interface: v2.00
[   19.801454] uvcvideo: Found UVC 1.00 device CNF7045 (04f2:b062)
[   19.806515] input: CNF7045 as /devices/pci0000:00/0000:00:03.3/usb1/1-8/1-8:1.0/input/input5
[   19.806622] usbcore: registered new interface driver uvcvideo
[   19.806625] USB Video Class driver (1.1.1)
[   19.827097] cfg80211: Calling CRDA to update world regulatory domain
[   19.924936] snd_hda_intel 0000:00:0f.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   19.924987] snd_hda_intel 0000:00:0f.0: setting latency timer to 64
[   19.951806] input: MLK OM1007 Wireless Mouse as /devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2:1.0/input/input6
[   19.952209] generic-usb 0003:04FC:0538.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [MLK OM1007 Wireless Mouse] on usb-0000:00:03.0-2/input0
[   19.952238] usbcore: registered new interface driver usbhid
[   19.952240] usbhid: USB HID core driver
[   19.960103] input: HDA SIS966 Mic as /devices/pci0000:00/0000:00:0f.0/sound/card0/input7
[   19.960243] input: HDA SIS966 Headphone as /devices/pci0000:00/0000:00:0f.0/sound/card0/input8
[   20.054722] cfg80211: World regulatory domain updated:
[   20.054727] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   20.054731] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   20.054735] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   20.054738] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   20.054741] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   20.054744] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   20.269923] init: failsafe main process (724) killed by TERM signal
[   20.311845] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   20.311850] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   20.311854] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   20.311857] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   20.311860] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   20.311863] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   20.311866] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   20.311869] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   20.311872] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   20.311876] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   20.311878] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   20.311882] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   20.311885] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   20.311888] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   20.311891] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   20.311894] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   20.311897] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   20.311900] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   20.311903] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   20.311906] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   20.311909] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   20.311913] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   20.311915] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   20.311919] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   20.311922] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   20.311925] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   20.311928] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[   20.311931] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   20.315481] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   20.316584] ieee80211 phy0: hwaddr 00:17:c4:1c:54:1d, RTL8187BvE V0 + rtl8225z2, rfkill mask 2
[   20.353320] rtl8187: Customer ID is 0x00
[   20.353572] Registered led device: rtl8187-phy0::radio
[   20.354059] Registered led device: rtl8187-phy0::tx
[   20.354093] Registered led device: rtl8187-phy0::rx
[   20.354808] rtl8187: wireless switch is on
[   20.355119] usbcore: registered new interface driver rtl8187
[   20.405787] ppdev: user-space parallel port driver
[   20.425979] Bluetooth: Core ver 2.16
[   20.426397] NET: Registered protocol family 31
[   20.426401] Bluetooth: HCI device and connection manager initialized
[   20.426405] Bluetooth: HCI socket layer initialized
[   20.426408] Bluetooth: L2CAP socket layer initialized
[   20.426424] Bluetooth: SCO socket layer initialized
[   20.448934] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   20.448938] Bluetooth: BNEP filters: protocol multicast
[   20.488041] vesafb: mode is 640x480x32, linelength=2560, pages=0
[   20.488044] vesafb: scrolling: redraw
[   20.488048] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[   20.490082] vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 1216k, total 1216k
[   20.496216] fbcon: VESA VGA (fb0) is primary device
[   20.496330] Console: switching to colour frame buffer device 80x30
[   20.496349] fb0: VESA VGA frame buffer device
[   20.507778] type=1400 audit(1349363742.875:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=832 comm="apparmor_parser"
[   20.517905] type=1400 audit(1349363742.887:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=831 comm="apparmor_parser"
[   20.528628] type=1400 audit(1349363742.899:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=832 comm="apparmor_parser"
[   20.528937] type=1400 audit(1349363742.899:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=832 comm="apparmor_parser"
[   20.546861] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.3, id: 0x81a0b2, caps: 0xa04713/0x200000/0x0
[   20.552151] Bluetooth: RFCOMM TTY layer initialized
[   20.552159] Bluetooth: RFCOMM socket layer initialized
[   20.552162] Bluetooth: RFCOMM ver 1.11
[   20.566861] type=1400 audit(1349363742.935:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=846 comm="apparmor_parser"
[   20.588834] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9
[   20.589995] type=1400 audit(1349363742.959:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=850 comm="apparmor_parser"
[   20.595369] type=1400 audit(1349363742.963:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=850 comm="apparmor_parser"
[   20.899343] init: kdm main process (906) killed by TERM signal
[   24.594552] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   24.594957] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   24.597947] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   24.600910] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   29.929261] wlan0: direct probe to 40:4a:03:fb:6d:6c (try 1/3)
[   29.933618] wlan0: direct probe responded
[   29.948048] wlan0: authenticate with 40:4a:03:fb:6d:6c (try 1)
[   29.952450] wlan0: authenticated
[   29.952915] wlan0: associate with 40:4a:03:fb:6d:6c (try 1)
[   29.964504] wlan0: RX AssocResp from 40:4a:03:fb:6d:6c (capab=0xc11 status=0 aid=2)
[   29.964510] wlan0: associated
[   29.970074] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   29.972783] cfg80211: Calling CRDA for country: NL
[   29.982436] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   29.982444] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   29.982447] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   29.982451] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   29.982454] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   29.982457] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   29.982460] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   29.982463] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   29.982466] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   29.982470] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   29.982473] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   29.982476] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   29.982479] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   29.982482] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   29.982485] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   29.982488] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   29.982491] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   29.982495] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   29.982497] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   29.982501] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   29.982503] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   29.982507] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   29.982509] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   29.982513] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   29.982515] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   29.982519] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   29.982521] cfg80211: Disabling freq 2484 MHz
[   29.982525] cfg80211: Regulatory domain changed to country: NL
[   29.982528] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   29.982531] cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   29.982534] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   29.982537] cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   29.982540] cfg80211:     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[   32.852042] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[   34.648023] sis190 0000:00:04.0: eth0: auto-negotiating...
[   36.791591] init: plymouth-stop pre-start process (1426) terminated with status 1
[   40.368095] wlan0: no IPv6 routers present
[   52.772850] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[   52.774454] sd 4:0:0:0: [sdb] Asking for cache data failed
[   52.774461] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[   52.904067] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[  104.472605] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[  104.474097] sd 4:0:0:0: [sdb] Asking for cache data failed
[  104.474105] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[  104.596081] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[  156.184626] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[  156.186119] sd 4:0:0:0: [sdb] Asking for cache data failed
[  156.186126] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[  207.896648] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[  207.898142] sd 4:0:0:0: [sdb] Asking for cache data failed
[  207.898150] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[  220.756085] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[  258.085174] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[  258.086740] sd 4:0:0:0: [sdb] Asking for cache data failed
[  258.086753] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[  258.292140] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[  309.784625] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[  309.786117] sd 4:0:0:0: [sdb] Asking for cache data failed
[  309.786124] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[  309.948085] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[  361.492789] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[  361.494259] sd 4:0:0:0: [sdb] Asking for cache data failed
[  361.494268] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[  413.208667] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[  413.210160] sd 4:0:0:0: [sdb] Asking for cache data failed
[  413.210167] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[  413.364087] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[  464.920565] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[  464.922056] sd 4:0:0:0: [sdb] Asking for cache data failed
[  464.922063] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[  465.084088] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[  516.632584] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[  516.634079] sd 4:0:0:0: [sdb] Asking for cache data failed
[  516.634086] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[  516.792070] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[  568.344607] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[  568.346099] sd 4:0:0:0: [sdb] Asking for cache data failed
[  568.346107] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[  568.468072] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[  610.967800] mtrr: no MTRR for c0000000,8000000 found
[  620.056630] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[  620.058121] sd 4:0:0:0: [sdb] Asking for cache data failed
[  620.058128] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[  671.768653] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[  671.770150] sd 4:0:0:0: [sdb] Asking for cache data failed
[  671.770157] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[  691.093503] mtrr: no MTRR for c0000000,8000000 found
[  723.476522] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[  723.477892] sd 4:0:0:0: [sdb] Asking for cache data failed
[  723.477896] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[  726.100053] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[  773.668636] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[  773.670126] sd 4:0:0:0: [sdb] Asking for cache data failed
[  773.670133] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[  773.796090] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[  825.368652] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[  825.370141] sd 4:0:0:0: [sdb] Asking for cache data failed
[  825.370148] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[  877.080673] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[  877.082163] sd 4:0:0:0: [sdb] Asking for cache data failed
[  877.082171] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[  928.792696] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[  928.794185] sd 4:0:0:0: [sdb] Asking for cache data failed
[  928.794192] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[  928.940065] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[  980.500584] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[  980.502066] sd 4:0:0:0: [sdb] Asking for cache data failed
[  980.502070] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[  980.676072] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 1032.216613] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1032.218129] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 1032.218137] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1032.396090] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 1083.928744] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1083.930273] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 1083.930281] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1135.640576] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1135.642066] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 1135.642073] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1135.792103] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 1187.352630] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1187.354122] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 1187.354130] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1202.596057] ieee80211 phy0: wlan0: No probe response from AP 40:4a:03:fb:6d:6c after 500ms, disconnecting.
[ 1202.696187] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 1202.696199] cfg80211: Restoring regulatory settings
[ 1202.696218] cfg80211: Calling CRDA to update world regulatory domain
[ 1202.705325] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 1202.705334] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1202.705340] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 1202.705346] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1202.705352] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 1202.705358] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1202.705363] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 1202.705369] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1202.705374] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 1202.705381] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1202.705386] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 1202.705392] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1202.705397] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 1202.705403] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1202.705408] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 1202.705422] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1202.705427] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 1202.705433] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1202.705439] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 1202.705445] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1202.705450] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 1202.705457] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1202.705462] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 1202.705468] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1202.705473] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 1202.705480] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1202.705485] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 1202.705491] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1202.705498] cfg80211: World regulatory domain updated:
[ 1202.705502] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1202.705509] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1202.705515] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1202.705521] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1202.705527] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1202.705532] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1205.061313] wlan0: authenticate with 40:4a:03:fb:6d:6c (try 1)
[ 1205.063072] wlan0: authenticated
[ 1205.201314] wlan0: associate with 40:4a:03:fb:6d:6c (try 1)
[ 1205.210944] wlan0: RX ReassocResp from 40:4a:03:fb:6d:6c (capab=0xc11 status=0 aid=2)
[ 1205.210953] wlan0: associated
[ 1205.217534] cfg80211: Calling CRDA for country: NL
[ 1205.228742] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 1205.228751] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1205.228757] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 1205.228763] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1205.228769] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 1205.228775] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1205.228780] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 1205.228786] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1205.228792] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 1205.228798] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1205.228803] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 1205.228809] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1205.228814] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 1205.228820] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1205.228825] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 1205.228832] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1205.228837] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 1205.228843] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1205.228848] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 1205.228855] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1205.228860] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 1205.228866] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1205.228871] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 1205.228877] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1205.228882] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 1205.228889] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1205.228893] cfg80211: Disabling freq 2484 MHz
[ 1205.228900] cfg80211: Regulatory domain changed to country: NL
[ 1205.228904] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1205.228910] cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 1205.228915] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 1205.228921] cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 1205.228927] cfg80211:     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 1239.064562] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1239.066052] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 1239.066059] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1239.224102] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 1290.776617] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1290.778106] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 1290.778113] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1342.488709] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1342.490179] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 1342.490188] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1394.200601] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1394.202089] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 1394.202097] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1394.328073] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 1445.912780] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1445.914268] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 1445.914275] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1446.084104] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 1497.624835] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1497.626326] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 1497.626333] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1497.764085] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 1549.336764] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1549.338253] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 1549.338261] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1549.460082] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 1601.048568] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1601.050057] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 1601.050064] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1601.240104] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 1652.760626] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1652.762114] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 1652.762121] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1652.888086] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 1704.472859] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1704.474487] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 1704.474497] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1756.184607] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1756.186110] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 1756.186119] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1756.364104] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 1807.896662] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1807.898151] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 1807.898159] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1808.024070] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 1859.608714] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1859.610206] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 1859.610213] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1911.320646] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1911.322294] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 1911.322301] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1924.180097] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 1961.508630] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1961.510266] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 1961.510272] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1961.696082] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 2013.208999] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2013.210691] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 2013.210714] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 2013.368086] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 2064.920635] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2064.922126] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 2064.922133] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 2065.072090] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 2116.632565] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2116.634055] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 2116.634062] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 2116.760102] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 2168.344616] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2168.346110] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 2168.346117] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 2168.500071] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 2207.524096] ieee80211 phy0: wlan0: No probe response from AP 40:4a:03:fb:6d:6c after 500ms, disconnecting.
[ 2207.636186] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 2207.636196] cfg80211: Restoring regulatory settings
[ 2207.636204] cfg80211: Calling CRDA to update world regulatory domain
[ 2207.645432] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 2207.645441] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2207.645446] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 2207.645453] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2207.645458] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 2207.645465] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2207.645470] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 2207.645476] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2207.645481] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 2207.645488] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2207.645493] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 2207.645499] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2207.645504] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 2207.645510] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2207.645515] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 2207.645522] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2207.645527] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 2207.645533] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2207.645538] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 2207.645545] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2207.645550] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 2207.645556] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2207.645561] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 2207.645568] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2207.645573] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 2207.645579] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2207.645585] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 2207.645591] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2207.645598] cfg80211: World regulatory domain updated:
[ 2207.645602] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2207.645608] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2207.645614] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2207.645620] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2207.645625] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2207.645631] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2210.005330] wlan0: authenticate with 40:4a:03:fb:6d:6c (try 1)
[ 2210.007080] wlan0: authenticated
[ 2210.141330] wlan0: associate with 40:4a:03:fb:6d:6c (try 1)
[ 2210.151199] wlan0: RX ReassocResp from 40:4a:03:fb:6d:6c (capab=0xc11 status=0 aid=2)
[ 2210.151207] wlan0: associated
[ 2210.158365] cfg80211: Calling CRDA for country: NL
[ 2210.166753] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 2210.166763] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 2210.166768] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 2210.166775] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 2210.166780] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 2210.166786] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 2210.166791] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 2210.166798] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 2210.166803] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 2210.166809] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 2210.166814] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 2210.166820] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 2210.166826] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 2210.166832] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 2210.166837] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 2210.166843] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 2210.166848] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 2210.166855] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 2210.166860] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 2210.166866] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 2210.166871] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 2210.166878] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 2210.166883] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 2210.166889] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 2210.166894] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 2210.166900] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 2210.166905] cfg80211: Disabling freq 2484 MHz
[ 2210.166911] cfg80211: Regulatory domain changed to country: NL
[ 2210.166916] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2210.166922] cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 2210.166928] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 2210.166933] cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 2210.166939] cfg80211:     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 2220.056672] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2220.058163] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 2220.058171] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 2220.180074] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 2271.768603] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2271.770093] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 2271.770100] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 2311.252060] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 2321.956607] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2321.958098] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 2321.958105] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 2322.120085] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 2373.656536] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2373.658028] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 2373.658036] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 2373.820070] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 2425.368590] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2425.370082] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 2425.370088] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 2477.080645] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2477.082136] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 2477.082144] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 2477.232084] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 2528.792574] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2528.794066] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 2528.794072] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 2528.956090] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 2580.504628] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2580.506120] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 2580.506127] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 2580.696081] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 2632.216934] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2632.218430] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 2632.218436] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 2632.360115] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 2683.928613] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2683.930106] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 2683.930113] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 2684.104086] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 2735.640687] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2735.642208] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 2735.642214] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 2735.768119] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 2787.352598] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2787.354090] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 2787.354097] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 2839.064653] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2839.066144] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 2839.066151] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 2890.776582] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2890.778074] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 2890.778081] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 2890.900075] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 2942.488638] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2942.490129] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 2942.490137] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 2994.200565] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2994.202059] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 2994.202066] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 2994.324072] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 3045.912620] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3045.914112] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 3045.914119] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 3046.068078] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 3097.624552] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3097.626043] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 3097.626050] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 3097.784139] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 3149.336604] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3149.338097] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 3149.338104] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 3149.516081] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 3201.048536] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3201.050026] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 3201.050033] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 3201.176059] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 3252.760591] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3252.762081] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 3252.762088] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 3304.472646] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3304.474135] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 3304.474142] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 3304.640087] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 3356.184574] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3356.186064] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 3356.186071] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 3356.312076] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 3407.896627] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3407.898120] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 3407.898128] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 3459.608584] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3459.610050] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 3459.610057] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 3459.760079] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 3511.320612] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3511.322106] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 3511.322113] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 3563.032667] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3563.034158] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 3563.034165] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 3563.180081] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 3614.744596] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3614.746087] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 3614.746094] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 3614.884079] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 3666.456649] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3666.458145] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 3666.458152] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 3666.608058] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 3718.168579] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3718.170072] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 3718.170079] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 3718.328076] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 3769.880637] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3769.882127] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 3769.882134] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 3781.540050] ieee80211 phy0: wlan0: No probe response from AP 40:4a:03:fb:6d:6c after 500ms, disconnecting.
[ 3781.625904] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 3781.625916] cfg80211: Restoring regulatory settings
[ 3781.625924] cfg80211: Calling CRDA to update world regulatory domain
[ 3781.636794] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 3781.636803] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3781.636809] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 3781.636815] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3781.636820] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 3781.636827] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3781.636832] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 3781.636838] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3781.636843] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 3781.636849] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3781.636854] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 3781.636861] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3781.636866] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 3781.636872] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3781.636877] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 3781.636884] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3781.636889] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 3781.636895] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3781.636900] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 3781.636907] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3781.636912] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 3781.636918] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3781.636924] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 3781.636930] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3781.636935] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 3781.636941] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3781.636947] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 3781.636953] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3781.636959] cfg80211: World regulatory domain updated:
[ 3781.636963] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3781.636970] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3781.636976] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3781.636982] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3781.636988] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3781.636994] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3784.001326] wlan0: authenticate with 40:4a:03:fb:6d:6c (try 1)
[ 3784.003079] wlan0: authenticated
[ 3784.137329] wlan0: associate with 40:4a:03:fb:6d:6c (try 1)
[ 3784.148202] wlan0: RX ReassocResp from 40:4a:03:fb:6d:6c (capab=0xc11 status=0 aid=2)
[ 3784.148209] wlan0: associated
[ 3784.154329] cfg80211: Calling CRDA for country: NL
[ 3784.163639] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 3784.163648] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3784.163654] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 3784.163660] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3784.163665] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 3784.163672] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3784.163677] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 3784.163683] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3784.163688] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 3784.163695] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3784.163700] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 3784.163706] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3784.163711] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 3784.163717] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3784.163722] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 3784.163729] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3784.163734] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 3784.163740] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3784.163745] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 3784.163751] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3784.163756] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 3784.163763] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3784.163768] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 3784.163774] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3784.163779] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 3784.163786] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3784.163790] cfg80211: Disabling freq 2484 MHz
[ 3784.163797] cfg80211: Regulatory domain changed to country: NL
[ 3784.163801] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3784.163807] cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 3784.163812] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 3784.163818] cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 3784.163823] cfg80211:     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 3821.592690] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3821.594181] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 3821.594189] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 3854.932104] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 3871.780573] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3871.782075] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 3871.782083] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 3923.480626] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3923.482117] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 3923.482125] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 3975.188533] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3975.190024] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 3975.190029] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4026.904609] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 4026.906100] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 4026.906107] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4078.616537] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 4078.618029] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 4078.618036] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4130.328595] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 4130.330084] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 4130.330091] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4182.040646] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 4182.042139] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 4182.042145] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4182.204075] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 4233.752577] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 4233.754069] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 4233.754076] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4233.900083] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 4285.464628] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 4285.466119] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 4285.466126] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4285.616072] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 4337.176560] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 4337.178054] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 4337.178061] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4337.304074] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 4388.888616] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 4388.890107] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 4388.890114] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4389.044059] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 4440.596521] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 4440.598020] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 4440.598024] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4492.312599] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 4492.314092] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 4492.314099] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4492.464080] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 4544.020637] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 4544.022130] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 4544.022135] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4544.148085] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 4595.736585] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 4595.738076] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 4595.738083] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4647.448830] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 4647.450293] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 4647.450303] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4647.680149] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 4699.160568] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 4699.162060] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 4699.162067] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4699.308083] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 4750.872622] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 4750.874114] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 4750.874121] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4751.044087] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 4802.588976] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 4802.590661] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 4802.590671] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4802.788094] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 4845.604047] ieee80211 phy0: wlan0: No probe response from AP 40:4a:03:fb:6d:6c after 500ms, disconnecting.
[ 4845.700141] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 4845.700152] cfg80211: Restoring regulatory settings
[ 4845.700172] cfg80211: Calling CRDA to update world regulatory domain
[ 4845.708863] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 4845.708872] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4845.708878] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 4845.708885] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4845.708890] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 4845.708897] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4845.708902] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 4845.708957] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4845.708963] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 4845.708969] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4845.708974] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 4845.708981] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4845.708986] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 4845.708992] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4845.708997] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 4845.709003] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4845.709008] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 4845.709015] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4845.709020] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 4845.709026] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4845.709031] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 4845.709037] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4845.709043] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 4845.709049] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4845.709054] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 4845.709060] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4845.709065] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 4845.709072] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4845.709079] cfg80211: World regulatory domain updated:
[ 4845.709083] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4845.709089] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4845.709095] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4845.709101] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4845.709107] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4845.709112] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4848.065262] wlan0: authenticate with 40:4a:03:fb:6d:6c (try 1)
[ 4848.067497] wlan0: authenticated
[ 4848.205265] wlan0: associate with 40:4a:03:fb:6d:6c (try 1)
[ 4848.214431] wlan0: RX ReassocResp from 40:4a:03:fb:6d:6c (capab=0xc11 status=0 aid=2)
[ 4848.214440] wlan0: associated
[ 4848.220722] cfg80211: Calling CRDA for country: NL
[ 4848.231421] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 4848.231431] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 4848.231436] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 4848.231443] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 4848.231448] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 4848.231454] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 4848.231459] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 4848.231466] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 4848.231471] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 4848.231477] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 4848.231482] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 4848.231488] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 4848.231493] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 4848.231499] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 4848.231504] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 4848.231511] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 4848.231516] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 4848.231522] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 4848.231528] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 4848.231534] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 4848.231539] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 4848.231545] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 4848.231550] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 4848.231556] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 4848.231561] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 4848.231567] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 4848.231572] cfg80211: Disabling freq 2484 MHz
[ 4848.231578] cfg80211: Regulatory domain changed to country: NL
[ 4848.231582] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4848.231588] cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 4848.231595] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 4848.231600] cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 4848.231606] cfg80211:     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 4854.296604] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 4854.298098] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 4854.298106] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4854.472086] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 4906.008673] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 4906.010154] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 4906.010161] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4906.136070] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 4957.720574] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 4957.722067] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 4957.722072] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 5009.432769] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 5009.434270] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 5009.434278] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 5009.572089] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 5061.144579] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 5061.146068] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 5061.146075] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 5061.320080] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 5112.856630] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 5112.858131] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 5112.858138] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 5113.036097] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 5164.564543] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 5164.566036] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 5164.566040] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 5164.728071] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 5216.280614] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 5216.282106] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 5216.282114] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 5247.572089] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 5266.470372] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 5266.471878] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 5266.471886] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 5266.656111] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 5318.168671] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 5318.170324] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 5318.170332] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 5369.880599] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 5369.882253] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 5369.882263] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 5419.604397] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 5422.104550] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 5422.106042] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 5422.106049] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 5473.817114] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 5473.818884] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 5473.818893] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 5525.528534] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 5525.530026] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 5525.530033] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 5577.240588] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 5577.242080] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 5577.242088] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 5628.952642] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 5628.954136] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 5628.954144] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 5629.084062] usb 1-4: reset high-speed USB device number 3 using ehci_hcd

thanks

[NikTh]

Just to be sure, do you mean I should shut down my computer, turn it on, go to BIOS and search for "Restore Default" there? (And, again to be absolutely sure, by that I won't lose any data?)
(Sorry, I just want to be careful - don't really know what I'm doing half the time)

Yes , that I mean. I think is an F key , you should see it as option in BIOS config page.

Restore Defaults is a safe option , nothing to do with OS = data. It will restore the default (factory settings) in you BIOS , in case that some option is responsible for the battery's fault.

Thanks

[NikTh]

Hi ,
I can see a LOT OF errors in dmesg related to a disk [sdb]

[   52.772850] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[   52.774454] sd 4:0:0:0: [sdb] Asking for cache data failed

Can post the results of

sudo fdisk -l 
sudo parted -l

Thanks

[Noor1101]

I went to BIOS and set default settings, but the problem persists.

I wonder what sdb could be, because I my HDD is not partitioned and there are no external discs connected. (Could it be my wireless-mouse-USB? The mouse works fine)

Here is the output:

noor@noor-EasyNote-MH35:~$ sudo fdisk -l 
[sudo] password for noor: 

Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000021e3

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1            2048   482373631   241185792   83  Linux
/dev/sda2       482375678   488396799     3010561    5  Extended
/dev/sda5       482375680   488396799     3010560   82  Linux swap / Solaris

noor@noor-EasyNote-MH35:~$ sudo parted -l
Model: ATA ST9250827AS (scsi)
Disk /dev/sda: 250GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End    Size    Type      File system     Flags
 1      1049kB  247GB  247GB   primary   ext4
 2      247GB   250GB  3083MB  extended
 5      247GB   250GB  3083MB  logical   linux-swap(v1)


noor@noor-EasyNote-MH35:~$

thanks

EDIT: sdb is NOT my USB-mouse. I unplugged it and made another dmesg.txt-file and the sdb-errors are still there

[NikTh]

I wonder what sdb could be, because I my HDD is not partitioned and there are no external discs connected. (Could it be my wireless-mouse-USB? The mouse works fine)


EDIT: sdb is NOT my USB-mouse. I unplugged it and made another dmesg.txt-file and the sdb-errors are still there

I wonder the same thing . [sdb] usually refers to scsi device (HDD , or maybe usb stick , card reader or any external device connected) .

Maybe is this a bug ?

Give the list of modules loaded please

lsmod

Thanks

[Noor1101]

The only connected device is my wireless-mouse-USB: no SDcard in the slot, 2 free (unused) USB-slots, no cd-rom in its drive.

Here's the output you requested:

noor@noor-EasyNote-MH35:~$ lsmod
Module                  Size  Used by
rfcomm                 38139  0 
bnep                   17830  2 
bluetooth             158438  10 rfcomm,bnep
parport_pc             32114  0 
ppdev                  12849  0 
vesafb                 13516  1 
binfmt_misc            17292  1 
arc4                   12473  2 
snd_hda_codec_realtek   174313  1 
snd_hda_intel          32765  5 
snd_hda_codec         109562  2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep              13276  1 snd_hda_codec
snd_pcm                80845  3 snd_hda_intel,snd_hda_codec
snd_seq_midi           13132  0 
snd_rawmidi            25424  1 snd_seq_midi
snd_seq_midi_event     14475  1 snd_seq_midi
rtl8187                56323  0 
mac80211              436455  1 rtl8187
snd_seq                51567  2 snd_seq_midi,snd_seq_midi_event
cfg80211              178679  2 rtl8187,mac80211
eeprom_93cx6           12653  1 rtl8187
snd_timer              28931  2 snd_pcm,snd_seq
psmouse                86421  0 
serio_raw              13027  0 
snd_seq_device         14172  3 snd_seq_midi,snd_rawmidi,snd_seq
snd                    62064  18 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore              14635  1 snd
joydev                 17393  0 
video                  19068  0 
snd_page_alloc         14108  2 snd_hda_intel,snd_pcm
uvcvideo               67203  0 
videodev               86588  1 uvcvideo
mac_hid                13077  0 
sis_agp                13165  1 
shpchp                 32325  0 
lp                     17455  0 
parport                40930  3 parport_pc,ppdev,lp
usbhid                 41906  0 
hid                    77367  1 usbhid
ums_realtek            17920  0 
usb_storage            39646  1 ums_realtek
uas                    17828  0 
sata_sis               12700  2 
sis190                 22575  0 
noor@noor-EasyNote-MH35:~$

thanks for your effort