Results 1 to 10 of 31

Thread: Belkin Wireless adapter issues

Hybrid View

  1. #1
    Join Date
    Nov 2006
    Location
    Lawrenceville, GA
    Beans
    80
    Distro
    Ubuntu 12.04 Precise Pangolin

    Belkin Wireless adapter issues

    I just recently installed Unbuntu 12.04 on my desktop. It easily recognized the Belkin USB Wireless N Adapter (F5D8053 v4), but every 5 to 10 minutes it will stop connecting to the internet. It continues to show that it is connected to the network, but nothing will download and pages will not load. Unplugging the adapter and plugging it back in will solve the problem for a short time, and then it will go down again. I was wondering if anyone else has had this problem and if there is a fix.

    AMD Phenom X4
    Redeon HD 6850 1GB
    8Gb RAM

  2. #2
    Join Date
    Nov 2009
    Beans
    Hidden!

    Re: Belkin Wireless adapter issues

    Can you plug it in and post the output of:

    Code:
    lspci -vvv
    dmesg
    lsmod
    linux-git/fs/super.c: "Self-destruct in 5 seconds. Have a nice day...\n",

  3. #3
    Join Date
    Nov 2006
    Location
    Lawrenceville, GA
    Beans
    80
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: Belkin Wireless adapter issues

    Module Size Used by
    nls_iso8859_1 12713 1
    nls_cp437 16991 1
    vfat 17585 1
    fat 61512 1 vfat
    joydev 17693 0
    hid_microsoft 12888 0
    vesafb 13844 1
    arc4 12529 2
    usbhid 47199 0
    hid 99559 2 hid_microsoft,usbhid
    rfcomm 47604 0
    bnep 18281 2
    snd_hda_codec_hdmi 32474 1
    bluetooth 180104 10 rfcomm,bnep
    parport_pc 32866 0
    ppdev 17113 0
    snd_hda_codec_realtek 224173 1
    rt2800usb 22684 0
    rt2800lib 58925 1 rt2800usb
    crc_ccitt 12667 1 rt2800lib
    rt2x00usb 20762 1 rt2800usb
    rt2x00lib 51144 3 rt2800usb,rt2800lib,rt2x00usb
    mac80211 506816 3 rt2800lib,rt2x00usb,rt2x00lib
    snd_hda_intel 33773 5
    snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_i ntel
    snd_seq_midi 13324 0
    snd_hwdep 13668 1 snd_hda_codec
    snd_rawmidi 30748 1 snd_seq_midi
    cfg80211 205544 2 rt2x00lib,mac80211
    snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
    snd_seq_midi_event 14899 1 snd_seq_midi
    snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event
    psmouse 97362 0
    k10temp 13166 0
    mac_hid 13253 0
    fglrx 3263886 178
    snd_timer 29990 2 snd_pcm,snd_seq
    snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq
    serio_raw 13211 0
    edac_core 53746 0
    edac_mce_amd 23709 0
    snd 78855 20 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_i ntel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,s nd_seq,snd_timer,snd_seq_device
    sp5100_tco 13791 0
    soundcore 15091 1 snd
    snd_page_alloc 18529 2 snd_hda_intel,snd_pcm
    i2c_piix4 13301 0
    lp 17799 0
    parport 46562 3 parport_pc,ppdev,lp
    r8169 62099 0
    pata_atiixp 13204 0
    usb_storage 49198 1

  4. #4
    Join Date
    Nov 2009
    Beans
    Hidden!

    Re: Belkin Wireless adapter issues

    And where is the rest?
    linux-git/fs/super.c: "Self-destruct in 5 seconds. Have a nice day...\n",

  5. #5
    Join Date
    Nov 2006
    Location
    Lawrenceville, GA
    Beans
    80
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: Belkin Wireless adapter issues

    00:00.0 Host bridge: Advanced Micro Devices [AMD] nee ATI RX780/RX790 Chipset Host Bridge
    Subsystem: Advanced Micro Devices [AMD] nee ATI RX780/RX790 Chipset Host Bridge
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
    Latency: 0
    Region 3: Memory at <ignored> (64-bit, non-prefetchable)
    Capabilities: <access denied>

    00:02.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD790 PCI to PCI bridge (external gfx0 port A) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
    I/O behind bridge: 0000d000-0000dfff
    Memory behind bridge: fe800000-fe8fffff
    Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: <access denied>
    Kernel driver in use: pcieport
    Kernel modules: shpchp

    00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] (rev 40) (prog-if 01 [AHCI 1.0])
    Subsystem: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
    Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 64, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 41
    Region 0: I/O ports at c000 [size=8]
    Region 1: I/O ports at b000 [size=4]
    Region 2: I/O ports at a000 [size=8]
    Region 3: I/O ports at 9000 [size=4]
    Region 4: I/O ports at 8000 [size=16]
    Region 5: Memory at fe7ffc00 (32-bit, non-prefetchable) [size=1K]
    Capabilities: <access denied>
    Kernel driver in use: ahci

    00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
    Subsystem: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 64, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 18
    Region 0: Memory at fe7fe000 (32-bit, non-prefetchable) [size=4K]
    Kernel driver in use: ohci_hcd

    00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
    Subsystem: Micro-Star International Co., Ltd. Device 7599
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 64, Cache Line Size: 64 bytes
    Interrupt: pin B routed to IRQ 17
    Region 0: Memory at fe7ff800 (32-bit, non-prefetchable) [size=256]
    Capabilities: <access denied>
    Kernel driver in use: ehci_hcd

    00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
    Subsystem: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 64, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 18
    Region 0: Memory at fe7fd000 (32-bit, non-prefetchable) [size=4K]
    Kernel driver in use: ohci_hcd

    00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
    Subsystem: Micro-Star International Co., Ltd. Device 7599
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 64, Cache Line Size: 64 bytes
    Interrupt: pin B routed to IRQ 17
    Region 0: Memory at fe7ff400 (32-bit, non-prefetchable) [size=256]
    Capabilities: <access denied>
    Kernel driver in use: ehci_hcd

    00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 42)
    Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Kernel driver in use: piix4_smbus
    Kernel modules: sp5100_tco, i2c-piix4

    00:14.1 IDE interface: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 IDE Controller (rev 40) (prog-if 8a [Master SecP PriP])
    Subsystem: Micro-Star International Co., Ltd. Device 7599
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 64
    Interrupt: pin B routed to IRQ 17
    Region 0: I/O ports at 01f0 [size=8]
    Region 1: I/O ports at 03f4 [size=1]
    Region 2: I/O ports at 0170 [size=8]
    Region 3: I/O ports at 0374 [size=1]
    Region 4: I/O ports at ff00 [size=16]
    Kernel driver in use: pata_atiixp
    Kernel modules: pata_atiixp

    00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) (rev 40)
    Subsystem: Micro-Star International Co., Ltd. Device 7599
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 64, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 16
    Region 0: Memory at fe7f8000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: <access denied>
    Kernel driver in use: snd_hda_intel
    Kernel modules: snd-hda-intel

    00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
    Subsystem: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller
    Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0

    00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge (rev 40) (prog-if 01 [Subtractive decode])
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 64
    Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
    I/O behind bridge: 0000f000-00000fff
    Memory behind bridge: fff00000-000fffff
    Prefetchable memory behind bridge: fff00000-000fffff
    Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

    00:14.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller (prog-if 10 [OHCI])
    Subsystem: Micro-Star International Co., Ltd. Device 7599
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 64, Cache Line Size: 64 bytes
    Interrupt: pin C routed to IRQ 18
    Region 0: Memory at fe7fc000 (32-bit, non-prefetchable) [size=4K]
    Kernel driver in use: ohci_hcd

    00:15.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0) (prog-if 00 [Normal decode])
    Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
    I/O behind bridge: 0000f000-00000fff
    Memory behind bridge: fff00000-000fffff
    Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: <access denied>
    Kernel driver in use: pcieport
    Kernel modules: shpchp

    00:15.1 PCI bridge: Advanced Micro Devices [AMD] nee ATI SB700/SB800/SB900 PCI to PCI bridge (PCIE port 1) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
    I/O behind bridge: 0000e000-0000efff
    Memory behind bridge: fe900000-fe9fffff
    Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: <access denied>
    Kernel driver in use: pcieport
    Kernel modules: shpchp

    00:16.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
    Subsystem: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 64, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 18
    Region 0: Memory at fe7f7000 (32-bit, non-prefetchable) [size=4K]
    Kernel driver in use: ohci_hcd

    00:16.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
    Subsystem: Micro-Star International Co., Ltd. Device 7599
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 64, Cache Line Size: 64 bytes
    Interrupt: pin B routed to IRQ 17
    Region 0: Memory at fe7ff000 (32-bit, non-prefetchable) [size=256]
    Capabilities: <access denied>
    Kernel driver in use: ehci_hcd

    00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Capabilities: <access denied>

    00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

    00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Kernel modules: amd64_edac_mod

    00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Capabilities: <access denied>
    Kernel driver in use: k10temp
    Kernel modules: k10temp

    00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

    01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Barts PRO [ATI Radeon HD 6800 Series] (prog-if 00 [VGA controller])
    Subsystem: PC Partner Limited Device 174b
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 44
    Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
    Region 2: Memory at fe8e0000 (64-bit, non-prefetchable) [size=128K]
    Region 4: I/O ports at d000 [size=256]
    Expansion ROM at fe8c0000 [disabled] [size=128K]
    Capabilities: <access denied>
    Kernel driver in use: fglrx_pci
    Kernel modules: fglrx_updates, radeon

    01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Barts HDMI Audio [Radeon HD 6800 Series]
    Subsystem: PC Partner Limited Device aa88
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin B routed to IRQ 43
    Region 0: Memory at fe8bc000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: <access denied>
    Kernel driver in use: snd_hda_intel
    Kernel modules: snd-hda-intel

    04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
    Subsystem: Micro-Star International Co., Ltd. Device 7599
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 42
    Region 0: I/O ports at e800 [size=256]
    Region 2: Memory at fdfff000 (64-bit, prefetchable) [size=4K]
    Region 4: Memory at fdff8000 (64-bit, prefetchable) [size=16K]
    Expansion ROM at fe9e0000 [disabled] [size=128K]
    Capabilities: <access denied>
    Kernel driver in use: r8169
    Kernel modules: r8169



    [ 0.569027] pci 0000:00:02.0: bridge window [mem 0xfe800000-0xfe8fffff]
    [ 0.569029] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.569032] pci 0000:00:14.4: PCI bridge to [bus 02-02]
    [ 0.569042] pci 0000:00:15.0: PCI bridge to [bus 03-03]
    [ 0.569050] pci 0000:00:15.1: PCI bridge to [bus 04-04]
    [ 0.569052] pci 0000:00:15.1: bridge window [io 0xe000-0xefff]
    [ 0.569056] pci 0000:00:15.1: bridge window [mem 0xfe900000-0xfe9fffff]
    [ 0.569059] pci 0000:00:15.1: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
    [ 0.569073] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 0.569076] pci 0000:00:02.0: setting latency timer to 64
    [ 0.569089] pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.569092] pci 0000:00:15.0: setting latency timer to 64
    [ 0.569097] pci 0000:00:15.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.569100] pci 0000:00:15.1: setting latency timer to 64
    [ 0.569103] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.569104] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.569106] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.569107] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
    [ 0.569109] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
    [ 0.569111] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
    [ 0.569112] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
    [ 0.569114] pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfe8fffff]
    [ 0.569116] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.569118] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
    [ 0.569119] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
    [ 0.569121] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.569122] pci_bus 0000:02: resource 7 [mem 0x000d0000-0x000dffff]
    [ 0.569124] pci_bus 0000:02: resource 8 [mem 0xd0000000-0xdfffffff]
    [ 0.569126] pci_bus 0000:02: resource 9 [mem 0xf0000000-0xfebfffff]
    [ 0.569128] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
    [ 0.569129] pci_bus 0000:04: resource 1 [mem 0xfe900000-0xfe9fffff]
    [ 0.569131] pci_bus 0000:04: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
    [ 0.569165] NET: Registered protocol family 2
    [ 0.569315] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.570210] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 0.572149] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.572385] TCP: Hash tables configured (established 524288 bind 65536)
    [ 0.572387] TCP reno registered
    [ 0.572395] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.572437] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.572580] NET: Registered protocol family 1
    [ 0.572602] pci 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 1.420116] pci 0000:00:12.0: PCI INT A disabled
    [ 1.420166] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 1.420241] pci 0000:00:12.2: PCI INT B disabled
    [ 1.420258] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 1.500118] pci 0000:00:13.0: PCI INT A disabled
    [ 1.500146] pci 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 1.500219] pci 0000:00:13.2: PCI INT B disabled
    [ 1.500254] pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 1.580111] pci 0000:00:14.5: PCI INT C disabled
    [ 1.580144] pci 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 1.660122] pci 0000:00:16.0: PCI INT A disabled
    [ 1.660149] pci 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 1.660221] pci 0000:00:16.2: PCI INT B disabled
    [ 1.660256] pci 0000:01:00.0: Boot video device
    [ 1.660271] PCI: CLS 64 bytes, default 64
    [ 1.661655] PCI-DMA: Disabling AGP.
    [ 1.661736] PCI-DMA: aperture base @ c4000000 size 65536 KB
    [ 1.661738] PCI-DMA: using GART IOMMU.
    [ 1.661740] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
    [ 1.665179] IBS: LVT offset 1 assigned
    [ 1.665195] perf: AMD IBS detected (0x0000001f)
    [ 1.665319] audit: initializing netlink socket (disabled)
    [ 1.665333] type=2000 audit(1348713891.660:1): initialized
    [ 1.681127] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 1.683126] VFS: Disk quotas dquot_6.5.2
    [ 1.683171] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 1.683606] fuse init (API version 7.17)
    [ 1.683676] msgmni has been set to 15961
    [ 1.684099] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 1.684132] io scheduler noop registered
    [ 1.684133] io scheduler deadline registered
    [ 1.684156] io scheduler cfq registered (default)
    [ 1.684261] pcieport 0000:00:02.0: setting latency timer to 64
    [ 1.684289] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
    [ 1.684499] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 1.684518] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 1.684615] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
    [ 1.684620] ACPI: Power Button [PWRB]
    [ 1.684649] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
    [ 1.684651] ACPI: Power Button [PWRF]
    [ 1.684698] ACPI: processor limited to max C-state 1
    [ 1.852825] ERST: Table is not found!
    [ 1.852827] GHES: HEST is not enabled!
    [ 1.852897] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
    [ 1.873299] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 1.944846] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 1.980453] Linux agpgart interface v0.103
    [ 1.981633] brd: module loaded
    [ 1.982215] loop: module loaded
    [ 1.982386] ahci 0000:00:11.0: version 3.0
    [ 1.982401] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    [ 1.982460] ahci 0000:00:11.0: irq 41 for MSI/MSI-X
    [ 1.982531] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
    [ 1.982534] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
    [ 1.983017] scsi0 : ahci
    [ 1.983105] scsi1 : ahci
    [ 1.983164] scsi2 : ahci
    [ 1.983217] scsi3 : ahci
    [ 1.983285] ata1: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd00 irq 41
    [ 1.983288] ata2: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd80 irq 41
    [ 1.983291] ata3: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffe00 irq 41
    [ 1.983293] ata4: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffe80 irq 41
    [ 1.983417] pata_acpi 0000:00:14.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 1.983437] pata_acpi 0000:00:14.1: setting latency timer to 64
    [ 1.983756] Fixed MDIO Bus: probed
    [ 1.983770] tun: Universal TUN/TAP device driver, 1.6
    [ 1.983771] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
    [ 1.983815] PPP generic driver version 2.4.2
    [ 1.983892] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.983938] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 1.983951] ehci_hcd 0000:00:12.2: EHCI Host Controller
    [ 1.983992] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
    [ 1.983999] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 1.984039] QUIRK: Enable AMD PLL fix
    [ 1.984048] ehci_hcd 0000:00:12.2: debug port 1
    [ 1.984065] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe7ff800
    [ 1.996096] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
    [ 1.996326] hub 1-0:1.0: USB hub found
    [ 1.996329] hub 1-0:1.0: 5 ports detected
    [ 1.996447] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 1.996459] ehci_hcd 0000:00:13.2: EHCI Host Controller
    [ 1.996499] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
    [ 1.996505] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 1.996522] ehci_hcd 0000:00:13.2: debug port 1
    [ 1.996533] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe7ff400
    [ 2.008091] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
    [ 2.008304] hub 2-0:1.0: USB hub found
    [ 2.008307] hub 2-0:1.0: 5 ports detected
    [ 2.008423] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 2.008437] ehci_hcd 0000:00:16.2: EHCI Host Controller
    [ 2.008475] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
    [ 2.008481] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 2.008498] ehci_hcd 0000:00:16.2: debug port 1
    [ 2.008509] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe7ff000
    [ 2.020086] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
    [ 2.020222] hub 3-0:1.0: USB hub found
    [ 2.020225] hub 3-0:1.0: 4 ports detected
    [ 2.020352] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 2.020439] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 2.020452] ohci_hcd 0000:00:12.0: OHCI Host Controller
    [ 2.020494] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
    [ 2.020514] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe7fe000
    [ 2.080181] hub 4-0:1.0: USB hub found
    [ 2.080186] hub 4-0:1.0: 5 ports detected
    [ 2.080359] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 2.080371] ohci_hcd 0000:00:13.0: OHCI Host Controller
    [ 2.080408] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
    [ 2.080420] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe7fd000
    [ 2.140174] hub 5-0:1.0: USB hub found
    [ 2.140179] hub 5-0:1.0: 5 ports detected
    [ 2.140354] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 2.140367] ohci_hcd 0000:00:14.5: OHCI Host Controller
    [ 2.140403] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
    [ 2.140417] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe7fc000
    [ 2.200186] hub 6-0:1.0: USB hub found
    [ 2.200191] hub 6-0:1.0: 2 ports detected
    [ 2.200363] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 2.200376] ohci_hcd 0000:00:16.0: OHCI Host Controller
    [ 2.200413] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
    [ 2.200425] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe7f7000
    [ 2.260189] hub 7-0:1.0: USB hub found
    [ 2.260194] hub 7-0:1.0: 4 ports detected
    [ 2.260307] uhci_hcd: USB Universal Host Controller Interface driver
    [ 2.260390] usbcore: registered new interface driver libusual
    [ 2.260416] i8042: PNP: No PS/2 controller found. Probing ports directly.
    [ 2.260753] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 2.260757] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 2.260926] mousedev: PS/2 mouse device common for all mice
    [ 2.261041] rtc_cmos 00:02: RTC can wake from S4
    [ 2.261120] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    [ 2.261141] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [ 2.261199] device-mapper: uevent: version 1.0.3
    [ 2.261248] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
    [ 2.261254] cpuidle: using governor ladder
    [ 2.261256] cpuidle: using governor menu
    [ 2.261257] EFI Variables Facility v0.08 2004-May-17
    [ 2.261417] TCP cubic registered
    [ 2.261478] NET: Registered protocol family 10
    [ 2.261819] NET: Registered protocol family 17
    [ 2.261822] Registering the dns_resolver key type
    [ 2.261938] PM: Hibernation image not present or could not be loaded.
    [ 2.261946] registered taskstats version 1
    [ 2.267710] Magic number: 12:939:713
    [ 2.267792] rtc_cmos 00:02: setting system clock to 2012-09-27 02:44:53 UTC (1348713893)
    [ 2.267807] powernow-k8: Found 1 AMD Phenom(tm) II X4 960T Processor (4 cpu cores) (version 2.20.00)
    [ 2.267820] powernow-k8: Core Performance Boosting: on.
    [ 2.267853] powernow-k8: 0 : pstate 0 (3000 MHz)
    [ 2.267855] powernow-k8: 1 : pstate 1 (2300 MHz)
    [ 2.267856] powernow-k8: 2 : pstate 2 (1600 MHz)
    [ 2.267857] powernow-k8: 3 : pstate 3 (800 MHz)
    [ 2.268121] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    [ 2.268123] EDD information not available.
    [ 2.300147] ata4: SATA link down (SStatus 0 SControl 300)
    [ 2.304146] ata3: SATA link down (SStatus 0 SControl 300)
    [ 2.308135] usb 1-1: new high-speed USB device number 2 using ehci_hcd
    [ 2.443043] Initializing USB Mass Storage driver...
    [ 2.443170] scsi4 : usb-storage 1-1:1.0
    [ 2.443212] usbcore: registered new interface driver usb-storage
    [ 2.443213] USB Mass Storage support registered.
    [ 2.472116] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 2.472159] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 2.475660] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS90, HN00S300, max UDMA/100
    [ 2.477025] ata2.00: configured for UDMA/100
    [ 2.483845] ata1.00: ATA-8: Corsair Force 3 SSD, 1.3.3, max UDMA/133
    [ 2.483848] ata1.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 2.493806] ata1.00: configured for UDMA/133
    [ 2.494037] scsi 0:0:0:0: Direct-Access ATA Corsair Force 3 1.3. PQ: 0 ANSI: 5
    [ 2.494158] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [ 2.494174] sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
    [ 2.494296] sd 0:0:0:0: [sda] Write Protect is off
    [ 2.494298] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.494334] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.494883] sda: sda1 sda2 < sda5 >
    [ 2.495251] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 2.499200] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS90 HN00 PQ: 0 ANSI: 5
    [ 2.502006] sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 2.502015] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.502196] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 2.502331] sr 1:0:0:0: Attached scsi generic sg1 type 5
    [ 2.503512] Freeing unused kernel memory: 920k freed
    [ 2.503702] Write protecting the kernel read-only data: 12288k
    [ 2.507583] Freeing unused kernel memory: 1616k freed
    [ 2.510787] Freeing unused kernel memory: 1200k freed
    [ 2.524906] udevd[144]: starting version 175
    [ 2.553142] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 2.553161] r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 2.553189] r8169 0000:04:00.0: setting latency timer to 64
    [ 2.553244] r8169 0000:04:00.0: irq 42 for MSI/MSI-X
    [ 2.553552] r8169 0000:04:00.0: eth0: RTL8168d/8111d at 0xffffc90000c18000, 8c:89:a5:32:df:be, XID 081000c0 IRQ 42
    [ 2.553555] r8169 0000:04:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    [ 2.554009] scsi5 : pata_atiixp
    [ 2.556196] scsi6 : pata_atiixp
    [ 2.556320] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
    [ 2.556323] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
    [ 2.578076] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 2.664112] Refined TSC clocksource calibration: 2999.945 MHz.
    [ 2.664125] Switching to clocksource tsc
    [ 2.672099] usb 3-2: new high-speed USB device number 2 using ehci_hcd
    [ 2.932092] usb 3-3: new high-speed USB device number 3 using ehci_hcd
    [ 3.128396] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 3.134024] udevd[383]: starting version 175
    [ 3.136697] Adding 8386556k swap on /dev/sda5. Priority:-1 extents:1 across:8386556k SS
    [ 3.155464] lp: driver loaded but no devices found
    [ 3.171666] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
    [ 3.221144] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
    [ 3.229813] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
    [ 3.229879] SP5100 TCO timer: mmio address 0xb8fe00 already in use
    [ 3.234314] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
    [ 3.234317] Disabling lock debugging due to kernel taint
    [ 3.235705] MCE: In-kernel MCE decoding enabled.
    [ 3.237192] EDAC MC: Ver: 2.1.0
    [ 3.253831] AMD64 EDAC driver v3.4.0
    [ 3.256386] [fglrx] Maximum main memory to use for locked dma buffers: 7751 MBytes.
    [ 3.256483] [fglrx] vendor: 1002 device: 6739 count: 1
    [ 3.256927] [fglrx] ioport: bar 4, base 0xd000, size: 0x100
    [ 3.256941] pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 3.256946] pci 0000:01:00.0: setting latency timer to 64
    [ 3.257103] EDAC amd64: DRAM ECC disabled.
    [ 3.257110] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
    [ 3.257111] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
    [ 3.257112] (Note that use of the override may cause unknown side effects.)
    [ 3.257264] [fglrx] Kernel PAT support is enabled
    [ 3.257279] [fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 1 minors
    [ 3.282178] cfg80211: Calling CRDA to update world regulatory domain
    [ 3.297085] type=1400 audit(1348713894.525:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=720 comm="apparmor_parser"
    [ 3.297475] type=1400 audit(1348713894.525:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=720 comm="apparmor_parser"
    [ 3.297679] type=1400 audit(1348713894.525:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=720 comm="apparmor_parser"
    [ 3.298063] type=1400 audit(1348713894.525:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=695 comm="apparmor_parser"
    [ 3.298447] type=1400 audit(1348713894.525:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=695 comm="apparmor_parser"
    [ 3.298650] type=1400 audit(1348713894.525:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=695 comm="apparmor_parser"
    [ 3.303116] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 3.332085] usb 4-2: new low-speed USB device number 2 using ohci_hcd
    [ 3.345559] init: failsafe main process (748) killed by TERM signal
    [ 3.351106] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input2
    [ 3.351162] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input3
    [ 3.351203] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
    [ 3.351242] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
    [ 3.351298] input: HDA ATI SB Line-Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
    [ 3.351338] input: HDA ATI SB Line-Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
    [ 3.351376] input: HDA ATI SB Line-Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
    [ 3.351415] input: HDA ATI SB Line-Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
    [ 3.351939] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 3.352117] snd_hda_intel 0000:01:00.1: irq 43 for MSI/MSI-X
    [ 3.352140] snd_hda_intel 0000:01:00.1: setting latency timer to 64
    [ 3.352990] ppdev: user-space parallel port driver
    [ 3.377378] Bluetooth: Core ver 2.16
    [ 3.377399] NET: Registered protocol family 31
    [ 3.377401] Bluetooth: HCI device and connection manager initialized
    [ 3.377404] Bluetooth: HCI socket layer initialized
    [ 3.377405] Bluetooth: L2CAP socket layer initialized
    [ 3.377409] Bluetooth: SCO socket layer initialized
    [ 3.378395] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
    [ 3.378463] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10
    [ 3.378584] cfg80211: World regulatory domain updated:
    [ 3.378587] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [ 3.378589] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [ 3.378591] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [ 3.378593] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [ 3.378594] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [ 3.378596] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [ 3.390741] type=1400 audit(1348713894.617:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=849 comm="apparmor_parser"
    [ 3.391190] type=1400 audit(1348713894.617:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=849 comm="apparmor_parser"
    [ 3.392850] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [ 3.392852] Bluetooth: BNEP filters: protocol multicast
    [ 3.399724] Bluetooth: RFCOMM TTY layer initialized
    [ 3.399728] Bluetooth: RFCOMM socket layer initialized
    [ 3.399729] Bluetooth: RFCOMM ver 1.11
    [ 3.421059] type=1400 audit(1348713894.649:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=923 comm="apparmor_parser"
    [ 3.440661] scsi 4:0:0:0: Direct-Access WDC WD5000AAVS-00ZTB 3.00 PQ: 0 ANSI: 4
    [ 3.441348] sd 4:0:0:0: Attached scsi generic sg2 type 0
    [ 3.444059] sd 4:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [ 3.444777] sd 4:0:0:0: [sdb] Write Protect is off
    [ 3.444780] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
    [ 3.445413] sd 4:0:0:0: [sdb] No Caching mode page present
    [ 3.445416] sd 4:0:0:0: [sdb] Assuming drive cache: write through
    [ 3.447290] sd 4:0:0:0: [sdb] No Caching mode page present
    [ 3.447292] sd 4:0:0:0: [sdb] Assuming drive cache: write through
    [ 3.453671] sdb: sdb1
    [ 3.456279] sd 4:0:0:0: [sdb] No Caching mode page present
    [ 3.456283] sd 4:0:0:0: [sdb] Assuming drive cache: write through
    [ 3.456285] sd 4:0:0:0: [sdb] Attached SCSI disk
    [ 3.518313] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.0/input/input11
    [ 3.518415] generic-usb 0003:046D:C01E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:12.0-2/input0
    [ 3.518446] usbcore: registered new interface driver usbhid
    [ 3.518447] usbhid: USB HID core driver
    [ 3.581018] r8169 0000:04:00.0: eth0: link down
    [ 3.581793] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 3.582082] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 3.600035] usb 3-2: reset high-speed USB device number 2 using ehci_hcd
    [ 3.771111] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
    [ 3.771114] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [ 3.771116] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
    [ 3.771118] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [ 3.771120] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
    [ 3.771122] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [ 3.771123] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
    [ 3.771125] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [ 3.771126] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
    [ 3.771128] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [ 3.771130] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
    [ 3.771131] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [ 3.771133] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
    [ 3.771135] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [ 3.771136] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
    [ 3.771138] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [ 3.771139] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
    [ 3.771141] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [ 3.771143] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
    [ 3.771145] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [ 3.771146] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
    [ 3.771148] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [ 3.771149] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
    [ 3.771151] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [ 3.771153] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
    [ 3.771154] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [ 3.771156] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
    [ 3.771158] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [ 3.773764] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    [ 3.774198] Registered led device: rt2800usb-phy0::radio
    [ 3.774211] Registered led device: rt2800usb-phy0::assoc
    [ 3.774224] Registered led device: rt2800usb-phy0::quality
    [ 3.774251] usbcore: registered new interface driver rt2800usb
    [ 3.865241] vesafb: mode is 1400x1050x32, linelength=5632, pages=0
    [ 3.865244] vesafb: scrolling: redraw
    [ 3.865246] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
    [ 3.869667] usb 4-5: new low-speed USB device number 3 using ohci_hcd
    [ 3.870391] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011c00000, using 5824k, total 5824k
    [ 3.870577] Console: switching to colour frame buffer device 175x65
    [ 3.870601] fb0: VESA VGA frame buffer device
    [ 3.884160] init: plymouth-splash main process (1234) terminated with status 1
    [ 3.980853] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 3.981123] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 4.081327] input: Microsoft Natural\xffffffc2\xffffffae\xffffffae Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.0/input/input12
    [ 4.081466] microsoft 0003:045E:00DB.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Natural\xffffffc2\xffffffae\xffffffae Ergonomic Keyboard 4000] on usb-0000:00:12.0-5/input0
    [ 4.097261] input: Microsoft Natural\xffffffc2\xffffffae\xffffffae Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.1/input/input13
    [ 4.097350] microsoft 0003:045E:00DB.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Natural\xffffffc2\xffffffae\xffffffae Ergonomic Keyboard 4000] on usb-0000:00:12.0-5/input1
    [ 4.219350] fglrx_pci 0000:01:00.0: irq 44 for MSI/MSI-X
    [ 4.219931] [fglrx] Firegl kernel thread PID: 1262
    [ 4.220000] [fglrx] Firegl kernel thread PID: 1263
    [ 4.220093] [fglrx] Firegl kernel thread PID: 1264
    [ 4.220200] [fglrx] IRQ 44 Enabled
    [ 4.420185] [fglrx] Gart USWC size:1280 M.
    [ 4.420188] [fglrx] Gart cacheable size:508 M.
    [ 4.420191] [fglrx] Reserved FB block: Shared offset:0, size:1000000
    [ 4.420193] [fglrx] Reserved FB block: Unshared offset:fbfd000, size:403000
    [ 4.420195] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
    [ 7.280341] wlan0: authenticate with 00:22:75:52:80:ce (try 1)
    [ 7.282056] wlan0: authenticated
    [ 7.336333] wlan0: associate with 00:22:75:52:80:ce (try 1)
    [ 7.339797] wlan0: RX AssocResp from 00:22:75:52:80:ce (capab=0x411 status=0 aid=3)
    [ 7.339806] wlan0: associated
    [ 7.367990] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [32380.512204] usb 3-3: USB disconnect, device number 3

  6. #6
    Join Date
    Nov 2009
    Beans
    Hidden!

    Re: Belkin Wireless adapter issues

    Okay, wireless USB that uses rt2800 usb driver. Seems to work properly:

    [ 7.280341] wlan0: authenticate with 00:22:75:52:80:ce (try 1)
    [ 7.282056] wlan0: authenticated
    [ 7.336333] wlan0: associate with 00:22:75:52:80:ce (try 1)
    [ 7.339797] wlan0: RX AssocResp from 00:22:75:52:80:ce (capab=0x411 status=0 aid=3)
    [ 7.339806] wlan0: associated
    Could you:

    - unplug USB
    - execute: 'sudo dmesg -c'
    - plugin USB
    - make sure internet works
    - use it till it drops
    - execute: 'sudo dmesg >& dmesg.log'

    Post the contents (or the file itself) of dmesg.log here.
    linux-git/fs/super.c: "Self-destruct in 5 seconds. Have a nice day...\n",

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •