Hi everyone!
I have got a new video configuration, and I would like to set it up properly:
1 - Monitor 1600 x 900 (DVI connector)
2 - Monitor 1600 x 900 (DVI connector
3 - Projector 1920 x 1080 (HDMI connector)
The video card is an NVidia GTX 550 Ti 2GB.
I would like to set it up using the two monitors as one X screen using TwinView and the projector as a separate X screen on the right of the two monitors.
The xorg.conf script I came up with using the NVidia X server settings is:
Code:
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Acer V203H"
HorizSync 47.0 - 70.0
VertRefresh 56.0 - 75.0
Option "DPMS"
# HorizSync source: edid, VertRefresh source: edid
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "Seiko/Epson EPSON PJ"
HorizSync 15.0 - 92.0
VertRefresh 24.0 - 85.0
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 550 Ti"
Option "NoLogo" "True"
# Option "RenderAccel" "1"
BusID "PCI:3:0:0"
Screen 0
EndSection
Section "Device"
# Option "RenderAccel" "1"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 550 Ti"
BusID "PCI:3:0:0"
Screen 1
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "1"
Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "CRT-0: nvidia-auto-select +0+0, CRT-1: nvidia-auto-select +1600+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "DFP: 1920x1080 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Of course there is something wrong in here... because I'm not getting anything on the projector.
Does anyone have any clue on how to solve this problem?
Thank you in advance
Bookmarks