Code:
Boot Info Script 0.61 [1 April 2012]
============================= Boot Info Summary: ===============================
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos6)/boot/grub on this drive.
=> Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 7
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe
sda2: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda3: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sda6: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 12.04 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda7: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 12.04 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
sda8: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 4.06 4.06-pre1
Boot sector info: Syslinux looks at sector 11007680 of /dev/sdb1 for
its second stage. SYSLINUX is installed in the
directory. No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux/syslinux.cfg
/efi/boot/bootx64.efi /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 122,882,047 122,880,000 7 NTFS / exFAT / HPFS
/dev/sda2 122,882,048 368,642,047 245,760,000 7 NTFS / exFAT / HPFS
/dev/sda3 368,642,048 625,141,759 256,499,712 5 Extended
/dev/sda5 368,644,096 471,044,095 102,400,000 83 Linux
/dev/sda6 471,046,144 544,774,143 73,728,000 83 Linux
/dev/sda7 544,776,192 618,504,191 73,728,000 83 Linux
/dev/sda8 618,506,240 625,141,759 6,635,520 82 Linux swap / Solaris
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 8000 MB, 8000110592 bytes
160 heads, 19 sectors/track, 5139 cylinders, total 15625216 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 32 15,625,215 15,625,184 b W95 FAT32
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 781A64FB3C86B129 ntfs
/dev/sda2 7D9A7E49385BFDF9 ntfs shared
/dev/sda5 a05e448e-1a28-4939-8fa7-e4fb216f0da7 ext4 data
/dev/sda6 59b6ce17-6b15-4bbc-a70a-5cf6857f09a7 ext4
/dev/sda7 ae2f5a06-7cf8-4880-94c6-564bc239ffb6 ext4
/dev/sda8 8aa76b03-2f9a-4bb2-a42a-ade389eaefd4 swap
/dev/sdb1 E03B-7886 vfat PENDRIVE
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda7 / ext4 (rw,errors=remount-ro)
/dev/sdb1 /media/PENDRIVE vfat (rw,nosuid,nodev,uid=1000,gid=1000,shortname=mixed,dmask=0077,utf8=1,showexec,flush,uhelper=udisks)
=========================== sda6/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set=root 59b6ce17-6b15-4bbc-a70a-5cf6857f09a7
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set=root 59b6ce17-6b15-4bbc-a70a-5cf6857f09a7
set locale_dir=($root)/boot/grub/locale
set lang=en_IE
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=60
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi
menuentry 'Ubuntu, with Linux 3.2.0-23-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set=root 59b6ce17-6b15-4bbc-a70a-5cf6857f09a7
linux /boot/vmlinuz-3.2.0-23-generic root=UUID=59b6ce17-6b15-4bbc-a70a-5cf6857f09a7 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-23-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-23-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set=root 59b6ce17-6b15-4bbc-a70a-5cf6857f09a7
echo 'Loading Linux 3.2.0-23-generic ...'
linux /boot/vmlinuz-3.2.0-23-generic root=UUID=59b6ce17-6b15-4bbc-a70a-5cf6857f09a7 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-23-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set=root 59b6ce17-6b15-4bbc-a70a-5cf6857f09a7
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set=root 59b6ce17-6b15-4bbc-a70a-5cf6857f09a7
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows 7 (loader) (on /dev/sda1)" --class windows --class os {
insmod part_msdos
insmod ntfs
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 781A64FB3C86B129
chainloader +1
}
menuentry "Ubuntu, with Linux 3.2.0-23-generic (on /dev/sda7)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos7)'
search --no-floppy --fs-uuid --set=root ae2f5a06-7cf8-4880-94c6-564bc239ffb6
linux /boot/vmlinuz-3.2.0-23-generic root=UUID=ae2f5a06-7cf8-4880-94c6-564bc239ffb6 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-23-generic
}
menuentry "Ubuntu, with Linux 3.2.0-23-generic (recovery mode) (on /dev/sda7)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos7)'
search --no-floppy --fs-uuid --set=root ae2f5a06-7cf8-4880-94c6-564bc239ffb6
linux /boot/vmlinuz-3.2.0-23-generic root=UUID=ae2f5a06-7cf8-4880-94c6-564bc239ffb6 ro recovery nomodeset
initrd /boot/initrd.img-3.2.0-23-generic
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda6/etc/fstab: ================================
--------------------------------------------------------------------------------
UUID=781A64FB3C86B129 /media/windows ntfs-3g umask=007 0 0
UUID=7D9A7E49385BFDF9 /media/shared ntfs-3g umask=007 0 0
UUID=a05e448e-1a28-4939-8fa7-e4fb216f0da7 /media/data ext4 defaults 0 2
UUID=59b6ce17-6b15-4bbc-a70a-5cf6857f09a7 / ext4 defaults 0 1
UUID=ae2f5a06-7cf8-4880-94c6-564bc239ffb6 /media/linux2 ext4 defaults 0 0
UUID=8aa76b03-2f9a-4bb2-a42a-ade389eaefd4 swap swap sw 0 0
--------------------------------------------------------------------------------
=================== sda6: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
242.939407349 = 260.854202368 boot/grub/core.img 1
242.939376831 = 260.854169600 boot/grub/grub.cfg 1
226.026367188 = 242.693963776 boot/initrd.img-3.2.0-23-generic 2
226.745834351 = 243.466485760 boot/vmlinuz-3.2.0-23-generic 1
226.026367188 = 242.693963776 initrd.img 2
226.745834351 = 243.466485760 vmlinuz 1
=========================== sda7/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod efi_gop
insmod efi_uga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ext2
set root='(hd0,msdos7)'
search --no-floppy --fs-uuid --set=root ae2f5a06-7cf8-4880-94c6-564bc239ffb6
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
insmod part_msdos
insmod ext2
set root='(hd0,msdos7)'
search --no-floppy --fs-uuid --set=root ae2f5a06-7cf8-4880-94c6-564bc239ffb6
set locale_dir=($root)/boot/grub/locale
set lang=en_IE
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi
menuentry 'Ubuntu, with Linux 3.2.0-23-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos7)'
search --no-floppy --fs-uuid --set=root ae2f5a06-7cf8-4880-94c6-564bc239ffb6
linux /boot/vmlinuz-3.2.0-23-generic root=UUID=ae2f5a06-7cf8-4880-94c6-564bc239ffb6 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-23-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-23-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos7)'
search --no-floppy --fs-uuid --set=root ae2f5a06-7cf8-4880-94c6-564bc239ffb6
echo 'Loading Linux 3.2.0-23-generic ...'
linux /boot/vmlinuz-3.2.0-23-generic root=UUID=ae2f5a06-7cf8-4880-94c6-564bc239ffb6 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-23-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos7)'
search --no-floppy --fs-uuid --set=root ae2f5a06-7cf8-4880-94c6-564bc239ffb6
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos7)'
search --no-floppy --fs-uuid --set=root ae2f5a06-7cf8-4880-94c6-564bc239ffb6
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows 7 (loader) (on /dev/sda1)" --class windows --class os {
insmod part_msdos
insmod ntfs
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 781A64FB3C86B129
chainloader +1
}
menuentry "Ubuntu, with Linux 3.2.0-23-generic (on /dev/sda6)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set=root 59b6ce17-6b15-4bbc-a70a-5cf6857f09a7
linux /boot/vmlinuz-3.2.0-23-generic root=UUID=59b6ce17-6b15-4bbc-a70a-5cf6857f09a7 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-23-generic
}
menuentry "Ubuntu, with Linux 3.2.0-23-generic (recovery mode) (on /dev/sda6)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set=root 59b6ce17-6b15-4bbc-a70a-5cf6857f09a7
linux /boot/vmlinuz-3.2.0-23-generic root=UUID=59b6ce17-6b15-4bbc-a70a-5cf6857f09a7 ro recovery nomodeset
initrd /boot/initrd.img-3.2.0-23-generic
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda7/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda7 during installation
UUID=ae2f5a06-7cf8-4880-94c6-564bc239ffb6 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda8 during installation
UUID=8aa76b03-2f9a-4bb2-a42a-ade389eaefd4 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda7: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
278.156070709 = 298.667806720 boot/grub/grub.cfg 1
261.308593750 = 280.577966080 boot/initrd.img-3.2.0-23-generic 2
273.903060913 = 294.101172224 boot/vmlinuz-3.2.0-23-generic 1
261.308593750 = 280.577966080 initrd.img 2
273.903060913 = 294.101172224 vmlinuz 1
=========================== sdb1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
menuentry "Try Ubuntu without installing" {
set gfxpayload=keep
linux /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
initrd /casper/initrd.lz
}
menuentry "Install Ubuntu" {
set gfxpayload=keep
linux /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --
initrd /casper/initrd.lz
}
menuentry "Check disc for defects" {
set gfxpayload=keep
linux /casper/vmlinuz boot=casper integrity-check quiet splash --
initrd /casper/initrd.lz
}
--------------------------------------------------------------------------------
========================= sdb1/syslinux/syslinux.cfg: ==========================
--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
# If you would like to use the new menu and be presented with the option to install or run from USB at startup, remove # from the following line. This line was commented out (by request of many) to allow the old menu to be presented and to enable booting straight into the Live Environment!
# ui gfxboot bootlogo
--------------------------------------------------------------------------------
=================== sdb1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
?? = ?? boot/grub/grub.cfg 1
================= sdb1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
?? = ?? ldlinux.sys 1
?? = ?? syslinux/chain.c32 1
?? = ?? syslinux/gfxboot.c32 1
?? = ?? syslinux/syslinux.cfg 1
?? = ?? syslinux/vesamenu.c32 1
============== sdb1: Version of COM32(R) files used by Syslinux: ===============
syslinux/chain.c32 : COM32R module (v4.xx)
syslinux/gfxboot.c32 : COM32R module (v4.xx)
syslinux/vesamenu.c32 : COM32R module (v4.xx)
=============================== StdErr Messages: ===============================
xz: (stdin): Compressed data is corrupt
I can give you more feedback about my config if you tell me what to do. (and probably only tomorrow because I'm going to bed now!)
Bookmarks