Page 2 of 2 FirstFirst 12
Results 11 to 19 of 19

Thread: Wireless detected, but can't choose network?

  1. #11
    Join Date
    Feb 2008
    Location
    Texas
    Beans
    15,180
    Distro
    Ubuntu 14.04 Trusty Tahr

    Re: Wireless detected, but can't choose network?

    Hi, did you reboot? are you able to connect?
    Thanks

  2. #12
    Join Date
    Jun 2012
    Beans
    10

    Re: Wireless detected, but can't choose network?

    I rebooted, but still had no luck, everything is acting the same way (nothing happens when I click on a network.)

  3. #13
    Join Date
    Feb 2008
    Location
    Texas
    Beans
    15,180
    Distro
    Ubuntu 14.04 Trusty Tahr

    Re: Wireless detected, but can't choose network?

    Hi, please do:
    Code:
    sudo make unload
    Then reboot.
    Thanks

  4. #14
    Join Date
    Jun 2012
    Beans
    10

    Re: Wireless detected, but can't choose network?

    Still no changes.

  5. #15
    Join Date
    Feb 2008
    Location
    Texas
    Beans
    15,180
    Distro
    Ubuntu 14.04 Trusty Tahr

    Re: Wireless detected, but can't choose network?

    Hi, please post the output of:
    Code:
    dmesg | grep 819
    lsmod | grep 819
    What is the name of the network you want to connect too?
    Thanks

  6. #16
    Join Date
    Jun 2012
    Beans
    10

    Re: Wireless detected, but can't choose network?

    Code:
    cameron@Cameron-2:~$ dmesg | grep 819
    [    0.000000] Memory: 944868k/981952k available (5814k kernel code, 36632k reserved, 2841k data, 740k init, 68552k highmem)
    [    1.908198] ata2.00: configured for UDMA/100
    [   24.514941] rtl8192cu: MAC address: c8:60:00:d4:6f:13
    [   24.514949] rtl8192cu: Board Type 0
    [   26.207122] usbcore: registered new interface driver rtl8192cu
    [   33.875431] rtl8192cu: MAC auto ON okay!
    [   33.909933] rtl8192cu: Tx queue select: 0x05
    [   33.910695] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cufw.bin
    [  252.222819] forcedeth 0000:00:14.0: eth0: link up
    [  262.773729] rtl8192cu: MAC address: c8:60:00:d4:6f:13
    [  262.773743] rtl8192cu: Board Type 0
    [  262.822629] rtl8192cu: MAC auto ON okay!
    [  262.856268] rtl8192cu: Tx queue select: 0x05
    [  262.857039] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cufw.bin
    [ 7442.536204] rtl8192cu: MAC address: c8:60:00:d4:6f:13
    [ 7442.536217] rtl8192cu: Board Type 0
    [ 7442.591959] rtl8192cu: MAC auto ON okay!
    [ 7442.625327] rtl8192cu: Tx queue select: 0x05
    [ 7442.626099] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cufw.bin
    Code:
    cameron@Cameron-2:~$ lsmod | grep 819
    rtl8192cu              97722  0 
    rtl8192c_common        69519  1 rtl8192cu
    rtlwifi                95804  1 rtl8192cu
    mac80211              436455  3 rtl8192cu,rtl8192c_common,rtlwifi
    I'm trying to connect to NETGEAR02

  7. #17
    Join Date
    Feb 2008
    Location
    Texas
    Beans
    15,180
    Distro
    Ubuntu 14.04 Trusty Tahr

    Re: Wireless detected, but can't choose network?

    Hi, sorry for the late reply I am travelling right now.

    First unplug your wired connection so it does not interfere with the wireless connection then see if it will connect if not post the output of:
    Code:
    cat /etc/modprobe.d/blacklist.conf
    cat /var/lib/NetworkManager/NetworkManager.state
    cat /etc/NetworkManager/nm-system-settings.conf
    cat /etc/network/interfaces
    Code:
    sudo cat /var/log/syslog | grep -e rtl -e firmware -e wpa -e wlan -e etork | tail -n55
    Thanks

  8. #18
    Join Date
    Jun 2012
    Beans
    10

    Re: Wireless detected, but can't choose network?

    Code:
    cameron@Cameron-2:~$ cat /etc/modprobe.d/blacklist.conf
    # This file lists those modules which we don't want to be loaded by
    # alias expansion, usually so some other driver will be loaded for the
    # device instead.
    
    # evbug is a debug tool that should be loaded explicitly
    blacklist evbug
    
    # these drivers are very simple, the HID drivers are usually preferred
    blacklist usbmouse
    blacklist usbkbd
    
    # replaced by e100
    blacklist eepro100
    
    # replaced by tulip
    blacklist de4x5
    
    # causes no end of confusion by creating unexpected network interfaces
    blacklist eth1394
    
    # snd_intel8x0m can interfere with snd_intel8x0, doesn't seem to support much
    # hardware on its own (Ubuntu bug #2011, #6810)
    blacklist snd_intel8x0m
    
    # Conflicts with dvb driver (which is better for handling this device)
    blacklist snd_aw2
    
    # causes failure to suspend on HP compaq nc6000 (Ubuntu: #10306)
    blacklist i2c_i801
    
    # replaced by p54pci
    blacklist prism54
    
    # replaced by b43 and ssb.
    blacklist bcm43xx
    
    # most apps now use garmin usb driver directly (Ubuntu: #114565)
    blacklist garmin_gps
    
    # replaced by asus-laptop (Ubuntu: #184721)
    blacklist asus_acpi
    
    # low-quality, just noise when being used for sound playback, causes
    # hangs at desktop session start (Ubuntu: #246969)
    blacklist snd_pcsp
    
    # ugly and loud noise, getting on everyone's nerves; this should be done by a
    # nice pulseaudio bing (Ubuntu: #77010)
    blacklist pcspkr
    
    # EDAC driver for amd76x clashes with the agp driver preventing the aperture
    # from being initialised (Ubuntu: #297750). Blacklist so that the driver
    # continues to build and is installable for the few cases where its
    # really needed.
    blacklist amd76x_edac
    blacklist rt2800usb
    blacklist rt2x00usb
    blacklist rt2x00lib
    Code:
    cameron@Cameron-2:~$ cat /var/lib/NetworkManager/NetworkManager.state
    
    [main]
    NetworkingEnabled=true
    WirelessEnabled=true
    WWANEnabled=true
    WimaxEnabled=true
    Code:
    cameron@Cameron-2:~$ cat /etc/NetworkManager/nm-system-settings.conf
    cat: /etc/NetworkManager/nm-system-settings.conf: No such file or directory
    Code:
    cameron@Cameron-2:~$ cat /etc/network/interfaces
    auto lo
    iface lo inet loopback
    The last command didn't do anything after I entered my password.
    Even with my ethernet cable unplugged, I can see the connection but nothing happens when I click on it.

  9. #19
    Join Date
    Jun 2012
    Beans
    10

    Re: Wireless detected, but can't choose network?

    Anyone else care to lend a hand? It would be nice to get my wifi working so that typing this didn't involve putting another tower next to my desk for internet.

Page 2 of 2 FirstFirst 12

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •