Page 3 of 7 FirstFirst 12345 ... LastLast
Results 21 to 30 of 66

Thread: No Wireless after 12.04 upgrade - BCM43224

  1. #21
    Join Date
    Aug 2010
    Beans
    34

    Re: No Wireless after 12.04 upgrade - BCM43224

    Quote Originally Posted by wildmanne39 View Post
    Hi, please do:
    Code:
    sudo modprobe b43
    give it a few seconds then post the output of:
    Code:
    nm-tool
    Thanks
    when i tried the modprobe, computer hanged... waited for 2-3 minutes.. then i restarted... let me try the other one

  2. #22
    Join Date
    Aug 2010
    Beans
    34

    Re: No Wireless after 12.04 upgrade - BCM43224

    hi, after the update, i ran modeprobe -r wl below is the result


    Code:
    merin@merin-M15x:~$ sudo modprobe -r wl
    FATAL: Module wl not found.
    One more thing i noticed is that , now i dont see the wireless option in the network setting . on wired is visible.


    thanks,
    merin
    Last edited by merin_83; May 25th, 2012 at 03:10 PM.

  3. #23
    Join Date
    Feb 2008
    Location
    Texas
    Beans
    15,821
    Distro
    Ubuntu 14.04 Trusty Tahr

    Re: No Wireless after 12.04 upgrade - BCM43224

    Hi, please do:
    Code:
    sudo apt-get install --reinstall bcmwl-kernel-source broadcom-sta-common broadcom-sta-source
    Then:
    Code:
    sudo modprobe wl
    Then post the output of:
    Code:
    iwconfig
    rfkill list all
    nm-tool
    Code:
    sudo cat /var/log/syslog | grep -e wl -e firmware -e wpa -e eth1 -e etork | tail -n55
    Thanks

  4. #24
    Join Date
    Aug 2010
    Beans
    34

    Re: No Wireless after 12.04 upgrade - BCM43224

    hi the re install went fine, then here is the o/p of the cmds...



    Code:
    merin@merin-M15x:~$ iwconfig
    lo        no wireless extensions.
    
    eth1      IEEE 802.11  Access Point: Not-Associated   
              Link Quality:5  Signal level:0  Noise level:233
              Rx invalid nwid:0  invalid crypt:0  invalid misc:0
    
    eth0      no wireless extensions.
    
    merin@merin-M15x:~$


    Code:
    merin@merin-M15x:~$ rfkill list all
    0: brcmwl-0: Wireless LAN
    	Soft blocked: no
    	Hard blocked: no
    merin@merin-M15x:~$
    Code:
    merin@merin-M15x:~$ sudo cat /var/log/syslog | grep -e wl -e firmware -e wpa -e eth1 -e etork | tail -n55
    May 25 17:55:10 merin-M15x wpa_supplicant[13153]: nl80211: 'nl80211' generic netlink not found
    May 25 17:55:10 merin-M15x NetworkManager[654]: <info> (eth1): supplicant interface state: starting -> ready
    May 25 17:55:10 merin-M15x NetworkManager[654]: <info> (eth1): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42]
    May 25 17:55:10 merin-M15x NetworkManager[654]: <info> (eth1): supplicant interface state: ready -> inactive
    May 25 17:55:11 merin-M15x avahi-daemon[655]: Joining mDNS multicast group on interface eth1.IPv6 with address fe80::c2cb:38ff:fe52:22c4.
    May 25 17:55:11 merin-M15x avahi-daemon[655]: New relevant interface eth1.IPv6 for mDNS.
    May 25 17:55:11 merin-M15x avahi-daemon[655]: Registering new address record for fe80::c2cb:38ff:fe52:22c4 on eth1.*.
    May 25 17:55:32 merin-M15x NetworkManager[654]: <info> Activation (eth1) starting connection 'getyourown'
    May 25 17:55:32 merin-M15x NetworkManager[654]: <info> (eth1): device state change: disconnected -> prepare (reason 'none') [30 40 0]
    May 25 17:55:32 merin-M15x NetworkManager[654]: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) scheduled...
    May 25 17:55:32 merin-M15x NetworkManager[654]: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) started...
    May 25 17:55:32 merin-M15x NetworkManager[654]: <info> Activation (eth1) Stage 2 of 5 (Device Configure) scheduled...
    May 25 17:55:32 merin-M15x NetworkManager[654]: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) complete.
    May 25 17:55:32 merin-M15x NetworkManager[654]: <info> Activation (eth1) Stage 2 of 5 (Device Configure) starting...
    May 25 17:55:32 merin-M15x NetworkManager[654]: <info> (eth1): device state change: prepare -> config (reason 'none') [40 50 0]
    May 25 17:55:32 merin-M15x NetworkManager[654]: <info> Activation (eth1/wireless): access point 'getyourown' has security, but secrets are required.
    May 25 17:55:32 merin-M15x NetworkManager[654]: <info> (eth1): device state change: config -> need-auth (reason 'none') [50 60 0]
    May 25 17:55:32 merin-M15x NetworkManager[654]: <info> Activation (eth1) Stage 2 of 5 (Device Configure) complete.
    May 25 17:55:32 merin-M15x NetworkManager[654]: <info> (eth1): device state change: need-auth -> failed (reason 'no-secrets') [60 120 7]
    May 25 17:55:32 merin-M15x NetworkManager[654]: <warn> Activation (eth1) failed for access point (getyourown)
    May 25 17:55:32 merin-M15x NetworkManager[654]: <warn> Activation (eth1) failed.
    May 25 17:55:32 merin-M15x NetworkManager[654]: <info> (eth1): device state change: failed -> disconnected (reason 'none') [120 30 0]
    May 25 17:55:32 merin-M15x NetworkManager[654]: <info> (eth1): deactivating device (reason 'none') [0]
    May 25 17:55:35 merin-M15x NetworkManager[654]: <info> Activation (eth1) starting connection 'S1003'
    May 25 17:55:35 merin-M15x NetworkManager[654]: <info> (eth1): device state change: disconnected -> prepare (reason 'none') [30 40 0]
    May 25 17:55:35 merin-M15x NetworkManager[654]: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) scheduled...
    May 25 17:55:35 merin-M15x NetworkManager[654]: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) started...
    May 25 17:55:35 merin-M15x NetworkManager[654]: <info> Activation (eth1) Stage 2 of 5 (Device Configure) scheduled...
    May 25 17:55:35 merin-M15x NetworkManager[654]: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) complete.
    May 25 17:55:35 merin-M15x NetworkManager[654]: <info> Activation (eth1) Stage 2 of 5 (Device Configure) starting...
    May 25 17:55:35 merin-M15x NetworkManager[654]: <info> (eth1): device state change: prepare -> config (reason 'none') [40 50 0]
    May 25 17:55:35 merin-M15x NetworkManager[654]: <info> Activation (eth1/wireless): access point 'S1003' has security, but secrets are required.
    May 25 17:55:35 merin-M15x NetworkManager[654]: <info> (eth1): device state change: config -> need-auth (reason 'none') [50 60 0]
    May 25 17:55:35 merin-M15x NetworkManager[654]: <info> Activation (eth1) Stage 2 of 5 (Device Configure) complete.
    May 25 17:55:35 merin-M15x NetworkManager[654]: <info> (eth1): device state change: need-auth -> failed (reason 'no-secrets') [60 120 7]
    May 25 17:55:35 merin-M15x NetworkManager[654]: <warn> Activation (eth1) failed for access point (S1003)
    May 25 17:55:35 merin-M15x NetworkManager[654]: <warn> Activation (eth1) failed.
    May 25 17:55:35 merin-M15x NetworkManager[654]: <info> (eth1): device state change: failed -> disconnected (reason 'none') [120 30 0]
    May 25 17:55:35 merin-M15x NetworkManager[654]: <info> (eth1): deactivating device (reason 'none') [0]
    May 25 17:55:38 merin-M15x NetworkManager[654]: <info> Activation (eth1) starting connection 'getyourown-5'
    May 25 17:55:38 merin-M15x NetworkManager[654]: <info> (eth1): device state change: disconnected -> prepare (reason 'none') [30 40 0]
    May 25 17:55:38 merin-M15x NetworkManager[654]: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) scheduled...
    May 25 17:55:38 merin-M15x NetworkManager[654]: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) started...
    May 25 17:55:38 merin-M15x NetworkManager[654]: <info> Activation (eth1) Stage 2 of 5 (Device Configure) scheduled...
    May 25 17:55:38 merin-M15x NetworkManager[654]: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) complete.
    May 25 17:55:38 merin-M15x NetworkManager[654]: <info> Activation (eth1) Stage 2 of 5 (Device Configure) starting...
    May 25 17:55:38 merin-M15x NetworkManager[654]: <info> (eth1): device state change: prepare -> config (reason 'none') [40 50 0]
    May 25 17:55:38 merin-M15x NetworkManager[654]: <info> Activation (eth1/wireless): access point 'getyourown-5' has security, but secrets are required.
    May 25 17:55:38 merin-M15x NetworkManager[654]: <info> (eth1): device state change: config -> need-auth (reason 'none') [50 60 0]
    May 25 17:55:38 merin-M15x NetworkManager[654]: <info> Activation (eth1) Stage 2 of 5 (Device Configure) complete.
    May 25 17:55:38 merin-M15x NetworkManager[654]: <info> (eth1): device state change: need-auth -> failed (reason 'no-secrets') [60 120 7]
    May 25 17:55:38 merin-M15x NetworkManager[654]: <warn> Activation (eth1) failed for access point (getyourown-5)
    May 25 17:55:38 merin-M15x NetworkManager[654]: <warn> Activation (eth1) failed.
    May 25 17:55:38 merin-M15x NetworkManager[654]: <info> (eth1): device state change: failed -> disconnected (reason 'none') [120 30 0]
    May 25 17:55:38 merin-M15x NetworkManager[654]: <info> (eth1): deactivating device (reason 'none') [0]
    merin@merin-M15x:~$


    thanks,
    merin

  5. #25
    Join Date
    Feb 2008
    Location
    Texas
    Beans
    15,821
    Distro
    Ubuntu 14.04 Trusty Tahr

    Re: No Wireless after 12.04 upgrade - BCM43224

    Hi, please post the output of:
    Code:
    nm-tool
    Thanks

  6. #26
    Join Date
    Aug 2010
    Beans
    34

    Re: No Wireless after 12.04 upgrade - BCM43224

    oops sry, i missed that,,, here is the o/p


    Code:
    merin@merin-M15x:~$ nm-tool
    
    NetworkManager Tool
    
    State: disconnected
    
    - Device: eth0 -----------------------------------------------------------------
      Type:              Wired
      Driver:            e1000e
      State:             unavailable
      Default:           no
      HW Address:        84:2B:2B:82:42:C0
    
      Capabilities:
        Carrier Detect:  yes
    
      Wired Properties
        Carrier:         off
    
    
    merin@merin-M15x:~$
    this i did when the wired net connection was off.

    thanks,
    merin

  7. #27
    Join Date
    Feb 2008
    Location
    Texas
    Beans
    15,821
    Distro
    Ubuntu 14.04 Trusty Tahr

    Re: No Wireless after 12.04 upgrade - BCM43224

    Hi, I think we are getting closer please do:
    Code:
    sudo rmmod -f wl
    sudo modprobe brcmsmac
    Then post the output of:
    Code:
    nm-tool
    Code:
    sudo cat /var/log/syslog | grep -e brc -e firmware -e wpa -e eth1 -e etork | tail -n55
    do not restart if this works we will need to make it permanent if not I think we will be close and have to do some fine tuning.
    Thanks

  8. #28
    Join Date
    Aug 2010
    Beans
    34

    Re: No Wireless after 12.04 upgrade - BCM43224

    yes i too sense that ...


    Code:
    merin@merin-M15x:~$ sudo rmmod -f wl
    [sudo] password for merin: 
    ERROR: Removing 'wl': No such file or directory
    merin@merin-M15x:~$ sudo modprobe brcmsmac
    merin@merin-M15x:~$ nm-tool
    
    NetworkManager Tool
    
    State: connected (global)
    
    - Device: wlan0 ----------------------------------------------------------------
      Type:              802.11 WiFi
      Driver:            brcmsmac
      State:             unavailable
      Default:           no
      HW Address:        C0:CB:38:52:22:C4
    
      Capabilities:
    
      Wireless Properties
        WEP Encryption:  yes
        WPA Encryption:  yes
        WPA2 Encryption: yes
    
      Wireless Access Points 
    
    
    - Device: usb0  [Wired connection 2] -------------------------------------------
      Type:              Wired
      Driver:            rndis_host
      State:             connected
      Default:           yes
      HW Address:        02:33:60:33:69:01
    
      Capabilities:
        Carrier Detect:  yes
    
      Wired Properties
        Carrier:         on
    
      IPv4 Settings:
        Address:         192.168.42.185
        Prefix:          24 (255.255.255.0)
        Gateway:         192.168.42.129
    
        DNS:             192.168.42.129
    
    
    - Device: eth0 -----------------------------------------------------------------
      Type:              Wired
      Driver:            e1000e
      State:             unavailable
      Default:           no
      HW Address:        84:2B:2B:82:42:C0
    
      Capabilities:
        Carrier Detect:  yes
    
      Wired Properties
        Carrier:         off
    
    
    merin@merin-M15x:~$


    Code:
    merin@merin-M15x:~$ sudo cat /var/log/syslog | grep -e brc -e firmware -e wpa -e eth1 -e etork | tail -n55
    May 25 18:00:32 merin-M15x NetworkManager[654]: <info> (eth1): device state change: failed -> disconnected (reason 'none') [120 30 0]
    May 25 18:00:32 merin-M15x NetworkManager[654]: <info> (eth1): deactivating device (reason 'none') [0]
    May 25 18:00:35 merin-M15x NetworkManager[654]: <info> Activation (eth1) starting connection 'S1003'
    May 25 18:00:35 merin-M15x NetworkManager[654]: <info> (eth1): device state change: disconnected -> prepare (reason 'none') [30 40 0]
    May 25 18:00:35 merin-M15x NetworkManager[654]: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) scheduled...
    May 25 18:00:35 merin-M15x NetworkManager[654]: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) started...
    May 25 18:00:35 merin-M15x NetworkManager[654]: <info> Activation (eth1) Stage 2 of 5 (Device Configure) scheduled...
    May 25 18:00:35 merin-M15x NetworkManager[654]: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) complete.
    May 25 18:00:35 merin-M15x NetworkManager[654]: <info> Activation (eth1) Stage 2 of 5 (Device Configure) starting...
    May 25 18:00:35 merin-M15x NetworkManager[654]: <info> (eth1): device state change: prepare -> config (reason 'none') [40 50 0]
    May 25 18:00:35 merin-M15x NetworkManager[654]: <info> Activation (eth1/wireless): access point 'S1003' has security, but secrets are required.
    May 25 18:00:35 merin-M15x NetworkManager[654]: <info> (eth1): device state change: config -> need-auth (reason 'none') [50 60 0]
    May 25 18:00:35 merin-M15x NetworkManager[654]: <info> Activation (eth1) Stage 2 of 5 (Device Configure) complete.
    May 25 18:00:35 merin-M15x NetworkManager[654]: <info> (eth1): device state change: need-auth -> failed (reason 'no-secrets') [60 120 7]
    May 25 18:00:35 merin-M15x NetworkManager[654]: <warn> Activation (eth1) failed for access point (S1003)
    May 25 18:00:35 merin-M15x NetworkManager[654]: <warn> Activation (eth1) failed.
    May 25 18:00:35 merin-M15x NetworkManager[654]: <info> (eth1): device state change: failed -> disconnected (reason 'none') [120 30 0]
    May 25 18:00:35 merin-M15x NetworkManager[654]: <info> (eth1): deactivating device (reason 'none') [0]
    May 25 18:04:23 merin-M15x NetworkManager[654]: <info> Activation (eth1) starting connection 'getyourown-5'
    May 25 18:04:23 merin-M15x NetworkManager[654]: <info> (eth1): device state change: disconnected -> prepare (reason 'none') [30 40 0]
    May 25 18:04:23 merin-M15x NetworkManager[654]: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) scheduled...
    May 25 18:04:23 merin-M15x NetworkManager[654]: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) started...
    May 25 18:04:23 merin-M15x NetworkManager[654]: <info> Activation (eth1) Stage 2 of 5 (Device Configure) scheduled...
    May 25 18:04:23 merin-M15x NetworkManager[654]: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) complete.
    May 25 18:04:23 merin-M15x NetworkManager[654]: <info> Activation (eth1) Stage 2 of 5 (Device Configure) starting...
    May 25 18:04:23 merin-M15x NetworkManager[654]: <info> (eth1): device state change: prepare -> config (reason 'none') [40 50 0]
    May 25 18:04:23 merin-M15x NetworkManager[654]: <info> Activation (eth1/wireless): access point 'getyourown-5' has security, but secrets are required.
    May 25 18:04:23 merin-M15x NetworkManager[654]: <info> (eth1): device state change: config -> need-auth (reason 'none') [50 60 0]
    May 25 18:04:23 merin-M15x NetworkManager[654]: <info> Activation (eth1) Stage 2 of 5 (Device Configure) complete.
    May 25 18:04:23 merin-M15x NetworkManager[654]: <info> (eth1): device state change: need-auth -> failed (reason 'no-secrets') [60 120 7]
    May 25 18:04:23 merin-M15x NetworkManager[654]: <warn> Activation (eth1) failed for access point (getyourown-5)
    May 25 18:04:23 merin-M15x NetworkManager[654]: <warn> Activation (eth1) failed.
    May 25 18:04:23 merin-M15x NetworkManager[654]: <info> (eth1): device state change: failed -> disconnected (reason 'none') [120 30 0]
    May 25 18:04:23 merin-M15x NetworkManager[654]: <info> (eth1): deactivating device (reason 'none') [0]
    May 25 18:35:13 merin-M15x NetworkManager[616]: <info> monitoring kernel firmware directory '/lib/firmware'.
    May 25 19:26:06 merin-M15x NetworkManager[681]: <info> monitoring kernel firmware directory '/lib/firmware'.
    May 25 19:28:11 merin-M15x kernel: [  144.682900] brcmsmac 0000:07:00.0: bus 7 slot 0 func 0 irq 7
    May 25 19:28:11 merin-M15x kernel: [  144.682925] brcmsmac 0000:07:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    May 25 19:28:11 merin-M15x kernel: [  144.682935] brcmsmac 0000:07:00.0: setting latency timer to 64
    May 25 19:28:11 merin-M15x NetworkManager[681]: <info> (wlan0): new 802.11 WiFi device (driver: 'brcmsmac' ifindex: 5)
    May 25 19:28:11 merin-M15x kernel: [  144.798035] ieee80211 phy0: brcms_ops_config: change monitor mode: false (implement)
    May 25 19:28:11 merin-M15x kernel: [  144.798045] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
    May 25 19:28:11 merin-M15x kernel: [  144.798057] ieee80211 phy0: wl0: brcms_c_wme_setparams : no-clock
    May 25 19:28:11 merin-M15x kernel: [  144.798064] ieee80211 phy0: wl0: brcms_c_wme_setparams : no-clock
    May 25 19:28:11 merin-M15x kernel: [  144.798071] ieee80211 phy0: wl0: brcms_c_wme_setparams : no-clock
    May 25 19:28:11 merin-M15x kernel: [  144.798077] ieee80211 phy0: wl0: brcms_c_wme_setparams : no-clock
    May 25 19:28:11 merin-M15x kernel: [  144.798085] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
    May 25 19:28:11 merin-M15x dbus[635]: [system] Activating service name='fi.w1.wpa_supplicant1' (using servicehelper)
    May 25 19:28:11 merin-M15x dbus[635]: [system] Successfully activated service 'fi.w1.wpa_supplicant1'
    May 25 19:28:11 merin-M15x wpa_supplicant[2557]: Could not set interface wlan0 flags: Operation not possible due to RF-kill
    May 25 19:28:11 merin-M15x wpa_supplicant[2557]: Could not set interface 'wlan0' UP
    May 25 19:28:11 merin-M15x wpa_supplicant[2557]: Could not set interface wlan0 flags: Operation not possible due to RF-kill
    May 25 19:28:11 merin-M15x wpa_supplicant[2557]: Failed to initialize driver interface
    May 25 19:28:11 merin-M15x NetworkManager[681]: <info> wpa_supplicant started
    May 25 19:28:11 merin-M15x NetworkManager[681]: <error> [1337988491.402540] [nm-supplicant-interface.c:804] interface_add_cb(): (wlan0): error adding interface: wpa_supplicant couldn't grab this interface.
    merin@merin-M15x:~$

    thanks,
    merin

  9. #29
    Join Date
    Feb 2008
    Location
    Texas
    Beans
    15,821
    Distro
    Ubuntu 14.04 Trusty Tahr

    Re: No Wireless after 12.04 upgrade - BCM43224

    Hi, please do:
    Code:
    echo "blacklist dell_wmi" | sudo tee -a /etc/modprobe.d/blacklist.conf
    Then:
    Code:
    gksu gedit /etc/modprobe.d/blacklist.conf
    Remove blacklist brcmsmac
    save,close gedit and reboot.

    Also reboot your router and modem.
    Thanks

  10. #30
    Join Date
    Aug 2010
    Beans
    34

    Re: No Wireless after 12.04 upgrade - BCM43224

    hi, nope now again the wireless is not showing in the settings-network manager, only wired connections are showing

    thanks,
    merin

Page 3 of 7 FirstFirst 12345 ... LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •