Code:
Boot Info Script 0.61 [1 April 2012]
============================= Boot Info Summary: ===============================
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub on this drive.
=> Grub Legacy (v0.97) is installed in the MBR of /dev/sdb and looks on the
same drive in partition #1 for /boot/grub/stage2 and /boot/grub/menu.lst.
=> Grub2 (v1.99) is installed in the MBR of /dev/sdc and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and uses an
embedded config file:
---------------------------------------------------------------------------
search.fs_uuid c4cabb0e-8279-4472-860b-c3d619524bd1 root
set prefix=($root)/boot/grub
---------------------------------------------------------------------------
-----.
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 12.04 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sda5: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda6: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda7: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: According to the info in the boot sector, sdb1 starts
at sector 0. But according to the info from fdisk,
sdb1 starts at sector 63.
Operating System:
Boot files:
sdb2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sdb5: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdc1: __________________________________________________________________________
File system: ext4
Boot sector type: Grub2 (v1.99)
Boot sector info: Grub2 (v1.99) is installed in the boot sector of sdc1
and looks at sector 24655768 of the same hard drive
for core.img. core.img is at this location and looks
for (,msdos6)/boot/grub on this drive.
Operating System: Ubuntu 10.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sdc2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sdc5: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdc6: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 12.04 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 1,242,347,478 1,242,345,431 83 Linux
/dev/sda2 1,242,347,518 1,953,523,711 711,176,194 5 Extended
/dev/sda5 1,941,448,704 1,953,523,711 12,075,008 82 Linux swap / Solaris
/dev/sda6 1,242,347,520 1,929,394,175 687,046,656 83 Linux
/dev/sda7 1,929,396,224 1,941,438,463 12,042,240 82 Linux swap / Solaris
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 63 1,941,374,924 1,941,374,862 83 Linux
/dev/sdb2 1,941,374,986 1,953,520,064 12,145,079 5 Extended
/dev/sdb5 1,941,374,988 1,953,520,064 12,145,077 82 Linux swap / Solaris
Drive: sdc _____________________________________________________________________
Disk /dev/sdc: 20.0 GB, 20020396032 bytes
255 heads, 63 sectors/track, 2434 cylinders, total 39102336 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdc1 * 2,048 18,691,071 18,689,024 83 Linux
/dev/sdc2 18,692,094 39,100,415 20,408,322 5 Extended
/dev/sdc5 37,382,144 39,100,415 1,718,272 82 Linux swap / Solaris
/dev/sdc6 18,692,096 37,382,143 18,690,048 83 Linux
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 c4cabb0e-8279-4472-860b-c3d619524bd1 ext4
/dev/sda5 295c7bf8-7aa6-425e-a6eb-a37b219b38ea swap
/dev/sda6 4ba48cb5-dd06-484b-9ee2-09665d499f2f ext4
/dev/sda7 090f88eb-967e-48b1-b5d1-1eb65545af39 swap
/dev/sdb1 8993-34B8 vfat Pegasus
/dev/sdb5 39b3c9f0-97dd-4726-a94f-f657a8af794e swap
/dev/sdc1 fa66fefd-ea62-4993-b761-abae20086aee ext4
/dev/sdc5 d0514762-8937-42e3-9360-8639c3dc3d1b swap
/dev/sdc6 cb2e8bda-3da7-48f4-af2a-c1bb5f948687 ext4
/dev/sr0 iso9660 Ubuntu 12.04 LTS amd64
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sda1 /media/c4cabb0e-8279-4472-860b-c3d619524bd1 ext4 (rw,nosuid,nodev,uhelper=udisks)
/dev/sda6 /media/4ba48cb5-dd06-484b-9ee2-09665d499f2f ext4 (rw,nosuid,nodev,uhelper=udisks)
/dev/sdc1 /media/fa66fefd-ea62-4993-b761-abae20086aee ext4 (rw,nosuid,nodev,uhelper=udisks)
/dev/sdc6 /media/cb2e8bda-3da7-48f4-af2a-c1bb5f948687 ext4 (rw,nosuid,nodev,uhelper=udisks)
/dev/sr0 /cdrom iso9660 (ro,noatime)
=========================== sda1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root c4cabb0e-8279-4472-860b-c3d619524bd1
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root c4cabb0e-8279-4472-860b-c3d619524bd1
set locale_dir=($root)/boot/grub/locale
set lang=en_US
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="$1"
if [ "$1" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ ${recordfail} != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Ubuntu, with Linux 3.2.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root c4cabb0e-8279-4472-860b-c3d619524bd1
linux /boot/vmlinuz-3.2.0-24-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-24-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root c4cabb0e-8279-4472-860b-c3d619524bd1
echo 'Loading Linux 3.2.0-24-generic ...'
linux /boot/vmlinuz-3.2.0-24-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-24-generic
}
submenu "Previous Linux versions" {
menuentry 'Ubuntu, with Linux 3.0.0-17-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root c4cabb0e-8279-4472-860b-c3d619524bd1
linux /boot/vmlinuz-3.0.0-17-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.0.0-17-generic
}
menuentry 'Ubuntu, with Linux 3.0.0-17-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root c4cabb0e-8279-4472-860b-c3d619524bd1
echo 'Loading Linux 3.0.0-17-generic ...'
linux /boot/vmlinuz-3.0.0-17-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.0.0-17-generic
}
menuentry 'Ubuntu, with Linux 2.6.38-11-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root c4cabb0e-8279-4472-860b-c3d619524bd1
linux /boot/vmlinuz-2.6.38-11-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro quiet splash $vt_handoff
initrd /boot/initrd.img-2.6.38-11-generic
}
menuentry 'Ubuntu, with Linux 2.6.38-11-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root c4cabb0e-8279-4472-860b-c3d619524bd1
echo 'Loading Linux 2.6.38-11-generic ...'
linux /boot/vmlinuz-2.6.38-11-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.38-11-generic
}
menuentry 'Ubuntu, with Linux 2.6.35-28-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root c4cabb0e-8279-4472-860b-c3d619524bd1
linux /boot/vmlinuz-2.6.35-28-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro quiet splash $vt_handoff
initrd /boot/initrd.img-2.6.35-28-generic
}
menuentry 'Ubuntu, with Linux 2.6.35-28-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root c4cabb0e-8279-4472-860b-c3d619524bd1
echo 'Loading Linux 2.6.35-28-generic ...'
linux /boot/vmlinuz-2.6.35-28-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.35-28-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-30-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root c4cabb0e-8279-4472-860b-c3d619524bd1
linux /boot/vmlinuz-2.6.32-30-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro quiet splash $vt_handoff
initrd /boot/initrd.img-2.6.32-30-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-30-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root c4cabb0e-8279-4472-860b-c3d619524bd1
echo 'Loading Linux 2.6.32-30-generic ...'
linux /boot/vmlinuz-2.6.32-30-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-30-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root c4cabb0e-8279-4472-860b-c3d619524bd1
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root c4cabb0e-8279-4472-860b-c3d619524bd1
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Ubuntu, with Linux 2.6.32-28-generic (on /dev/sda6)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set=root 4ba48cb5-dd06-484b-9ee2-09665d499f2f
linux /boot/vmlinuz-2.6.32-28-generic root=UUID=4ba48cb5-dd06-484b-9ee2-09665d499f2f ro quiet splash
initrd /boot/initrd.img-2.6.32-28-generic
}
menuentry "Ubuntu, with Linux 2.6.32-28-generic (recovery mode) (on /dev/sda6)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set=root 4ba48cb5-dd06-484b-9ee2-09665d499f2f
linux /boot/vmlinuz-2.6.32-28-generic root=UUID=4ba48cb5-dd06-484b-9ee2-09665d499f2f ro single
initrd /boot/initrd.img-2.6.32-28-generic
}
menuentry "Ubuntu, with Linux 2.6.32-28-generic (on /dev/sdc1)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd2,msdos1)'
search --no-floppy --fs-uuid --set=root fa66fefd-ea62-4993-b761-abae20086aee
linux /boot/vmlinuz-2.6.32-28-generic root=UUID=fa66fefd-ea62-4993-b761-abae20086aee ro quiet splash
initrd /boot/initrd.img-2.6.32-28-generic
}
menuentry "Ubuntu, with Linux 2.6.32-28-generic (recovery mode) (on /dev/sdc1)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd2,msdos1)'
search --no-floppy --fs-uuid --set=root fa66fefd-ea62-4993-b761-abae20086aee
linux /boot/vmlinuz-2.6.32-28-generic root=UUID=fa66fefd-ea62-4993-b761-abae20086aee ro single
initrd /boot/initrd.img-2.6.32-28-generic
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sdb1 during installation
UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=d0514762-8937-42e3-9360-8639c3dc3d1b none swap sw 0 0
# swap was on /dev/sdb5 during installation
UUID=295c7bf8-7aa6-425e-a6eb-a37b219b38ea none swap sw 0 0
# swap was on /dev/sdc5 during installation
UUID=39b3c9f0-97dd-4726-a94f-f657a8af794e none swap sw 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
--------------------------------------------------------------------------------
=================== sda1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
= boot/grub/core.img 1
= boot/grub/grub.cfg 1
= boot/initrd.img-2.6.32-30-generic 2
= boot/initrd.img-2.6.35-28-generic 2
= boot/initrd.img-2.6.38-11-generic 2
= boot/initrd.img-3.0.0-17-generic 2
= boot/initrd.img-3.2.0-24-generic 2
= boot/vmlinuz-2.6.32-30-generic 1
= boot/vmlinuz-2.6.35-28-generic 1
= boot/vmlinuz-2.6.38-11-generic 2
= boot/vmlinuz-3.0.0-17-generic 2
= boot/vmlinuz-3.2.0-24-generic 1
= vmlinuz 1
= vmlinuz.old 2
=========================== sda6/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
insmod ext2
set root='(hd1,6)'
search --no-floppy --fs-uuid --set 4ba48cb5-dd06-484b-9ee2-09665d499f2f
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
insmod ext2
set root='(hd1,6)'
search --no-floppy --fs-uuid --set 4ba48cb5-dd06-484b-9ee2-09665d499f2f
set locale_dir=($root)/boot/grub/locale
set lang=en
insmod gettext
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.32-28-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd1,6)'
search --no-floppy --fs-uuid --set 4ba48cb5-dd06-484b-9ee2-09665d499f2f
linux /boot/vmlinuz-2.6.32-28-generic root=UUID=4ba48cb5-dd06-484b-9ee2-09665d499f2f ro quiet splash
initrd /boot/initrd.img-2.6.32-28-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-28-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd1,6)'
search --no-floppy --fs-uuid --set 4ba48cb5-dd06-484b-9ee2-09665d499f2f
echo 'Loading Linux 2.6.32-28-generic ...'
linux /boot/vmlinuz-2.6.32-28-generic root=UUID=4ba48cb5-dd06-484b-9ee2-09665d499f2f ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-28-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod ext2
set root='(hd1,6)'
search --no-floppy --fs-uuid --set 4ba48cb5-dd06-484b-9ee2-09665d499f2f
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod ext2
set root='(hd1,6)'
search --no-floppy --fs-uuid --set 4ba48cb5-dd06-484b-9ee2-09665d499f2f
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Ubuntu, with Linux 2.6.38-8-generic (on /dev/sdb1)" {
insmod ext2
set root='(hd1,1)'
search --no-floppy --fs-uuid --set c4cabb0e-8279-4472-860b-c3d619524bd1
linux /boot/vmlinuz-2.6.38-8-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro quiet splash vt.handoff=7
initrd /boot/initrd.img-2.6.38-8-generic
}
menuentry "Ubuntu, with Linux 2.6.38-8-generic (recovery mode) (on /dev/sdb1)" {
insmod ext2
set root='(hd1,1)'
search --no-floppy --fs-uuid --set c4cabb0e-8279-4472-860b-c3d619524bd1
linux /boot/vmlinuz-2.6.38-8-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro single
initrd /boot/initrd.img-2.6.38-8-generic
}
menuentry "Ubuntu, with Linux 2.6.35-28-generic (on /dev/sdb1)" {
insmod ext2
set root='(hd1,1)'
search --no-floppy --fs-uuid --set c4cabb0e-8279-4472-860b-c3d619524bd1
linux /boot/vmlinuz-2.6.35-28-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro quiet splash vt.handoff=7
initrd /boot/initrd.img-2.6.35-28-generic
}
menuentry "Ubuntu, with Linux 2.6.35-28-generic (recovery mode) (on /dev/sdb1)" {
insmod ext2
set root='(hd1,1)'
search --no-floppy --fs-uuid --set c4cabb0e-8279-4472-860b-c3d619524bd1
linux /boot/vmlinuz-2.6.35-28-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro single
initrd /boot/initrd.img-2.6.35-28-generic
}
menuentry "Ubuntu, with Linux 2.6.32-30-generic (on /dev/sdb1)" {
insmod ext2
set root='(hd1,1)'
search --no-floppy --fs-uuid --set c4cabb0e-8279-4472-860b-c3d619524bd1
linux /boot/vmlinuz-2.6.32-30-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro quiet splash vt.handoff=7
initrd /boot/initrd.img-2.6.32-30-generic
}
menuentry "Ubuntu, with Linux 2.6.32-30-generic (recovery mode) (on /dev/sdb1)" {
insmod ext2
set root='(hd1,1)'
search --no-floppy --fs-uuid --set c4cabb0e-8279-4472-860b-c3d619524bd1
linux /boot/vmlinuz-2.6.32-30-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro single
initrd /boot/initrd.img-2.6.32-30-generic
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
--------------------------------------------------------------------------------
=============================== sda6/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sdb6 during installation
UUID=4ba48cb5-dd06-484b-9ee2-09665d499f2f / ext4 errors=remount-ro 0 1
# swap was on /dev/sdb7 during installation
UUID=090f88eb-967e-48b1-b5d1-1eb65545af39 none swap sw 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
--------------------------------------------------------------------------------
=================== sda6: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
= boot/grub/core.img 1
= boot/grub/grub.cfg 1
= boot/initrd.img-2.6.32-28-generic 1
= boot/vmlinuz-2.6.32-28-generic 1
= initrd.img 1
= vmlinuz 1
=========================== sdc1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set fa66fefd-ea62-4993-b761-abae20086aee
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set fa66fefd-ea62-4993-b761-abae20086aee
set locale_dir=($root)/boot/grub/locale
set lang=en
insmod gettext
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.32-28-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set fa66fefd-ea62-4993-b761-abae20086aee
linux /boot/vmlinuz-2.6.32-28-generic root=UUID=fa66fefd-ea62-4993-b761-abae20086aee ro quiet splash
initrd /boot/initrd.img-2.6.32-28-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-28-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set fa66fefd-ea62-4993-b761-abae20086aee
echo 'Loading Linux 2.6.32-28-generic ...'
linux /boot/vmlinuz-2.6.32-28-generic root=UUID=fa66fefd-ea62-4993-b761-abae20086aee ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-28-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set fa66fefd-ea62-4993-b761-abae20086aee
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set fa66fefd-ea62-4993-b761-abae20086aee
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Ubuntu, with Linux 3.0.0-12-generic (on /dev/sdb1)" {
insmod ext2
set root='(hd1,1)'
search --no-floppy --fs-uuid --set c4cabb0e-8279-4472-860b-c3d619524bd1
linux /boot/vmlinuz-3.0.0-12-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro quiet splash vt.handoff=7
initrd /boot/initrd.img-3.0.0-12-generic
}
menuentry "Ubuntu, with Linux 3.0.0-12-generic (recovery mode) (on /dev/sdb1)" {
insmod ext2
set root='(hd1,1)'
search --no-floppy --fs-uuid --set c4cabb0e-8279-4472-860b-c3d619524bd1
linux /boot/vmlinuz-3.0.0-12-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro recovery nomodeset
initrd /boot/initrd.img-3.0.0-12-generic
}
menuentry "Ubuntu, with Linux 2.6.38-11-generic (on /dev/sdb1)" {
insmod ext2
set root='(hd1,1)'
search --no-floppy --fs-uuid --set c4cabb0e-8279-4472-860b-c3d619524bd1
linux /boot/vmlinuz-2.6.38-11-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro quiet splash vt.handoff=7
initrd /boot/initrd.img-2.6.38-11-generic
}
menuentry "Ubuntu, with Linux 2.6.38-11-generic (recovery mode) (on /dev/sdb1)" {
insmod ext2
set root='(hd1,1)'
search --no-floppy --fs-uuid --set c4cabb0e-8279-4472-860b-c3d619524bd1
linux /boot/vmlinuz-2.6.38-11-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro recovery nomodeset
initrd /boot/initrd.img-2.6.38-11-generic
}
menuentry "Ubuntu, with Linux 2.6.35-28-generic (on /dev/sdb1)" {
insmod ext2
set root='(hd1,1)'
search --no-floppy --fs-uuid --set c4cabb0e-8279-4472-860b-c3d619524bd1
linux /boot/vmlinuz-2.6.35-28-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro quiet splash vt.handoff=7
initrd /boot/initrd.img-2.6.35-28-generic
}
menuentry "Ubuntu, with Linux 2.6.35-28-generic (recovery mode) (on /dev/sdb1)" {
insmod ext2
set root='(hd1,1)'
search --no-floppy --fs-uuid --set c4cabb0e-8279-4472-860b-c3d619524bd1
linux /boot/vmlinuz-2.6.35-28-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro recovery nomodeset
initrd /boot/initrd.img-2.6.35-28-generic
}
menuentry "Ubuntu, with Linux 2.6.32-30-generic (on /dev/sdb1)" {
insmod ext2
set root='(hd1,1)'
search --no-floppy --fs-uuid --set c4cabb0e-8279-4472-860b-c3d619524bd1
linux /boot/vmlinuz-2.6.32-30-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro quiet splash vt.handoff=7
initrd /boot/initrd.img-2.6.32-30-generic
}
menuentry "Ubuntu, with Linux 2.6.32-30-generic (recovery mode) (on /dev/sdb1)" {
insmod ext2
set root='(hd1,1)'
search --no-floppy --fs-uuid --set c4cabb0e-8279-4472-860b-c3d619524bd1
linux /boot/vmlinuz-2.6.32-30-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro recovery nomodeset
initrd /boot/initrd.img-2.6.32-30-generic
}
menuentry "Ubuntu, with Linux 2.6.32-28-generic (on /dev/sdb6)" {
insmod ext2
set root='(hd1,6)'
search --no-floppy --fs-uuid --set 4ba48cb5-dd06-484b-9ee2-09665d499f2f
linux /boot/vmlinuz-2.6.32-28-generic root=UUID=4ba48cb5-dd06-484b-9ee2-09665d499f2f ro quiet splash
initrd /boot/initrd.img-2.6.32-28-generic
}
menuentry "Ubuntu, with Linux 2.6.32-28-generic (recovery mode) (on /dev/sdb6)" {
insmod ext2
set root='(hd1,6)'
search --no-floppy --fs-uuid --set 4ba48cb5-dd06-484b-9ee2-09665d499f2f
linux /boot/vmlinuz-2.6.32-28-generic root=UUID=4ba48cb5-dd06-484b-9ee2-09665d499f2f ro single
initrd /boot/initrd.img-2.6.32-28-generic
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
--------------------------------------------------------------------------------
=============================== sdc1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
/dev/sda1 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=d0514762-8937-42e3-9360-8639c3dc3d1b none swap sw 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
--------------------------------------------------------------------------------
=================== sdc1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
= boot/grub/core.img 1
= boot/grub/grub.cfg 1
= boot/initrd.img-2.6.32-28-generic 1
= boot/vmlinuz-2.6.32-28-generic 1
= initrd.img 1
= vmlinuz 1
=========================== sdc6/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ext2
set root='(hd2,msdos6)'
search --no-floppy --fs-uuid --set=root cb2e8bda-3da7-48f4-af2a-c1bb5f948687
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
insmod part_msdos
insmod ext2
set root='(hd2,msdos6)'
search --no-floppy --fs-uuid --set=root cb2e8bda-3da7-48f4-af2a-c1bb5f948687
set locale_dir=($root)/boot/grub/locale
set lang=en_US
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="$1"
if [ "$1" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ ${recordfail} != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Ubuntu, with Linux 3.2.0-23-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd2,msdos6)'
search --no-floppy --fs-uuid --set=root cb2e8bda-3da7-48f4-af2a-c1bb5f948687
linux /boot/vmlinuz-3.2.0-23-generic root=UUID=cb2e8bda-3da7-48f4-af2a-c1bb5f948687 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-23-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-23-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd2,msdos6)'
search --no-floppy --fs-uuid --set=root cb2e8bda-3da7-48f4-af2a-c1bb5f948687
echo 'Loading Linux 3.2.0-23-generic ...'
linux /boot/vmlinuz-3.2.0-23-generic root=UUID=cb2e8bda-3da7-48f4-af2a-c1bb5f948687 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-23-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd2,msdos6)'
search --no-floppy --fs-uuid --set=root cb2e8bda-3da7-48f4-af2a-c1bb5f948687
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd2,msdos6)'
search --no-floppy --fs-uuid --set=root cb2e8bda-3da7-48f4-af2a-c1bb5f948687
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Ubuntu, with Linux 3.2.0-24-generic (on /dev/sda1)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root c4cabb0e-8279-4472-860b-c3d619524bd1
linux /boot/vmlinuz-3.2.0-24-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-24-generic
}
menuentry "Ubuntu, with Linux 3.2.0-24-generic (recovery mode) (on /dev/sda1)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root c4cabb0e-8279-4472-860b-c3d619524bd1
linux /boot/vmlinuz-3.2.0-24-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro recovery nomodeset
initrd /boot/initrd.img-3.2.0-24-generic
}
menuentry "Ubuntu, with Linux 3.0.0-17-generic (on /dev/sda1)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root c4cabb0e-8279-4472-860b-c3d619524bd1
linux /boot/vmlinuz-3.0.0-17-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.0.0-17-generic
}
menuentry "Ubuntu, with Linux 3.0.0-17-generic (recovery mode) (on /dev/sda1)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root c4cabb0e-8279-4472-860b-c3d619524bd1
linux /boot/vmlinuz-3.0.0-17-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro recovery nomodeset
initrd /boot/initrd.img-3.0.0-17-generic
}
menuentry "Ubuntu, with Linux 2.6.38-11-generic (on /dev/sda1)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root c4cabb0e-8279-4472-860b-c3d619524bd1
linux /boot/vmlinuz-2.6.38-11-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro quiet splash $vt_handoff
initrd /boot/initrd.img-2.6.38-11-generic
}
menuentry "Ubuntu, with Linux 2.6.38-11-generic (recovery mode) (on /dev/sda1)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root c4cabb0e-8279-4472-860b-c3d619524bd1
linux /boot/vmlinuz-2.6.38-11-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro recovery nomodeset
initrd /boot/initrd.img-2.6.38-11-generic
}
menuentry "Ubuntu, with Linux 2.6.35-28-generic (on /dev/sda1)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root c4cabb0e-8279-4472-860b-c3d619524bd1
linux /boot/vmlinuz-2.6.35-28-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro quiet splash $vt_handoff
initrd /boot/initrd.img-2.6.35-28-generic
}
menuentry "Ubuntu, with Linux 2.6.35-28-generic (recovery mode) (on /dev/sda1)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root c4cabb0e-8279-4472-860b-c3d619524bd1
linux /boot/vmlinuz-2.6.35-28-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro recovery nomodeset
initrd /boot/initrd.img-2.6.35-28-generic
}
menuentry "Ubuntu, with Linux 2.6.32-30-generic (on /dev/sda1)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root c4cabb0e-8279-4472-860b-c3d619524bd1
linux /boot/vmlinuz-2.6.32-30-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro quiet splash $vt_handoff
initrd /boot/initrd.img-2.6.32-30-generic
}
menuentry "Ubuntu, with Linux 2.6.32-30-generic (recovery mode) (on /dev/sda1)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root c4cabb0e-8279-4472-860b-c3d619524bd1
linux /boot/vmlinuz-2.6.32-30-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro recovery nomodeset
initrd /boot/initrd.img-2.6.32-30-generic
}
menuentry "Ubuntu, with Linux 2.6.32-28-generic (on /dev/sda6)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set=root 4ba48cb5-dd06-484b-9ee2-09665d499f2f
linux /boot/vmlinuz-2.6.32-28-generic root=UUID=4ba48cb5-dd06-484b-9ee2-09665d499f2f ro quiet splash
initrd /boot/initrd.img-2.6.32-28-generic
}
menuentry "Ubuntu, with Linux 2.6.32-28-generic (recovery mode) (on /dev/sda6)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set=root 4ba48cb5-dd06-484b-9ee2-09665d499f2f
linux /boot/vmlinuz-2.6.32-28-generic root=UUID=4ba48cb5-dd06-484b-9ee2-09665d499f2f ro single
initrd /boot/initrd.img-2.6.32-28-generic
}
menuentry "Ubuntu, with Linux 2.6.32-28-generic (on /dev/sdc1)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd2,msdos1)'
search --no-floppy --fs-uuid --set=root fa66fefd-ea62-4993-b761-abae20086aee
linux /boot/vmlinuz-2.6.32-28-generic root=UUID=fa66fefd-ea62-4993-b761-abae20086aee ro quiet splash
initrd /boot/initrd.img-2.6.32-28-generic
}
menuentry "Ubuntu, with Linux 2.6.32-28-generic (recovery mode) (on /dev/sdc1)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd2,msdos1)'
search --no-floppy --fs-uuid --set=root fa66fefd-ea62-4993-b761-abae20086aee
linux /boot/vmlinuz-2.6.32-28-generic root=UUID=fa66fefd-ea62-4993-b761-abae20086aee ro single
initrd /boot/initrd.img-2.6.32-28-generic
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sdc6/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sdc6 during installation
UUID=cb2e8bda-3da7-48f4-af2a-c1bb5f948687 / ext4 errors=remount-ro 0 1
# swap was on /dev/sdc5 during installation
UUID=d0514762-8937-42e3-9360-8639c3dc3d1b none swap sw 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
--------------------------------------------------------------------------------
=================== sdc6: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
= boot/grub/core.img 1
= boot/grub/grub.cfg 1
= boot/initrd.img-3.2.0-23-generic 2
= boot/vmlinuz-3.2.0-23-generic 1
= initrd.img 2
= vmlinuz 1
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sda2
00000000 de 09 de fd 8b 3a 69 2a a3 0f ff 74 00 00 00 00 |.....:i*...t....|
00000010 00 2a 06 21 1c b6 7b 11 6e db d4 c5 d9 fa 86 5a |.*.!..{.n......Z|
00000020 1d 68 a0 a8 22 1e 7b 22 21 6a 26 40 b3 95 82 95 |.h..".{"!j&@....|
00000030 bb 0c 72 9c 74 bf 65 25 57 69 e8 cc 9c d9 31 fa |..r.t.e%Wi....1.|
00000040 ac 51 67 45 ca ed 31 05 94 d2 52 65 30 1d 67 22 |.QgE..1...Re0.g"|
00000050 9d e3 1d ad 32 e8 1c 75 40 72 e1 cf 86 72 ab 6e |....2..u@r...r.n|
00000060 9b e5 bc df 9a 2e 77 bc b3 db 5b ee 79 ed 6d f5 |......w...[.y.m.|
00000070 e5 e7 c3 7e 69 8c 3c 12 30 c8 bf 23 53 22 05 d7 |...~i.<.0..#S"..|
00000080 c6 bd 0b 7e bf 98 ff fd 98 00 00 00 01 a5 54 18 |...~..........T.|
00000090 1b 94 dd 1a 94 fc 0f 3d 0c be b1 ba 7a 8c 96 89 |.......=....z...|
000000a0 28 7a 1a 07 18 44 4c 81 67 27 05 8c 53 76 a6 22 |(z...DL.g'..Sv."|
000000b0 60 58 85 c8 50 2a 54 56 f1 5a a3 1a 4d d2 d3 09 |`X..P*TV.Z..M...|
000000c0 8a 22 bf 60 7a 82 62 9c a2 12 e3 8e 6e fa d0 e9 |.".`z.b.....n...|
000000d0 69 55 6c d2 79 44 96 22 09 3c 22 0e 53 3b 35 4e |iUl.yD.".<".S;5N|
000000e0 fc 42 ee 77 55 de 6f d9 12 a7 d3 bd c7 76 6b 6f |.B.wU.o......vko|
000000f0 5f 1e 79 4d ac 5e c3 6f 3e 4c 3e 6d 0a 7b 90 1b |_.yM.^.o>L>m.{..|
00000100 3a 74 3d 68 c8 46 8f ef a6 00 00 00 00 ff fa a0 |:t=h.F..........|
00000110 04 2a 29 02 80 03 a4 48 d8 51 e9 1a f2 7b 8a cb |.*)....H.Q...{..|
00000120 1d 60 c3 6e 0f 78 fb 5c c7 b1 2b 89 c9 20 2c 30 |.`.n.x.\..+.. ,0|
00000130 f4 99 70 01 c1 dc 67 21 c5 dc e0 55 27 0f b3 4d |..p...g!...U'..M|
00000140 9a 0e 89 85 07 df 21 b1 50 a9 0b 8c 79 a7 2a bb |......!.P...y.*.|
00000150 8c e7 b5 04 2c 35 87 a2 85 96 74 99 02 97 25 23 |....,5....t...%#|
00000160 f0 c5 9b 02 60 f8 7c 00 b0 20 41 03 38 61 01 c3 |....`.|.. A.8a..|
00000170 61 54 10 2c dc 1f 5c e6 c8 e1 cc 20 c2 19 dd 9f |aT.,..\.... ....|
00000180 86 35 43 08 e8 6a 16 7f 95 44 2f ae 45 f5 33 ff |.5C..j...D/.E.3.|
00000190 11 5f b3 a9 44 ad df bb 0f 6f f5 5e 13 21 f3 ab |._..D....o.^.!..|
000001a0 e7 fd b8 91 80 00 00 00 00 13 a2 a0 21 1b 7c ec |............!.|.|
000001b0 c8 21 e8 12 44 91 ce 9d 7b 53 55 b8 b9 07 00 fe |.!..D...{SU.....|
000001c0 ff ff 82 fe ff ff 02 70 ab 29 00 40 b8 00 00 fe |.......p.).@....|
000001d0 ff ff 05 fe ff ff 01 00 00 00 01 80 f3 28 00 00 |.............(..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
Unknown BootLoader on sdc2
00000000 3a 4a 24 22 16 1a 4a f9 48 40 2d 72 8b b3 64 46 |:J$"..J.H@-r..dF|
00000010 55 5b 16 ac a8 32 53 b6 64 f2 9b 02 59 64 91 a1 |U[...2S.d...Yd..|
00000020 18 9e 7f 39 6b 4d b1 b8 29 29 97 c9 b6 71 00 41 |...9kM..))...q.A|
00000030 23 09 84 26 2b 23 92 b3 a0 ce ab 22 9c 11 09 35 |#..&+#....."...5|
00000040 77 e4 99 44 88 4a 4e a9 bd f9 37 23 61 f1 5d 10 |w..D.JN...7#a.].|
00000050 0c f5 fa 11 c1 16 a6 a3 5e 0a 78 6d 41 60 9d bb |........^.xmA`..|
00000060 64 8c c2 27 69 26 2b fb 94 dd 46 6f 1f 94 56 4c |d..'i&+...Fo..VL|
00000070 a5 ca ad 97 4b 52 d0 20 81 10 85 6c 80 31 64 28 |....KR. ...l.1d(|
00000080 30 9c c9 04 32 b8 2c eb c1 89 6e b7 e4 26 65 09 |0...2.,...n..&e.|
00000090 f0 7e ca 43 13 a3 94 24 92 ca d6 24 05 e5 6b e4 |.~.C...$...$..k.|
000000a0 db 9a ac b0 04 34 79 62 14 2a 10 44 62 58 7d 66 |.....4yb.*.DbX}f|
000000b0 40 89 62 6f 48 46 9a 42 86 50 84 3c d1 0c 2e 7c |@.boHF.B.P.<...||
000000c0 8c fc 91 3c 09 08 c0 69 37 4c 27 46 69 28 12 c8 |...<...i7L'Fi(..|
000000d0 5a ae 42 ec a2 6b c3 cb 68 21 85 49 3c c4 92 07 |Z.B..k..h!.I<...|
000000e0 cb 13 c6 ed 6c e1 11 85 a3 a2 e5 93 64 72 59 09 |....l.......drY.|
000000f0 f2 c4 b2 76 b1 24 2b 51 22 e7 cf 96 32 a0 89 32 |...v.$+Q"...2..2|
00000100 b1 0c 0c 0f a1 20 d8 14 11 88 0c 5a 45 0a 3a 44 |..... .....ZE.:D|
00000110 ea de 7f 51 79 c3 74 8b 23 eb e5 f3 fd 7f 5f 9c |...Qy.t.#....._.|
00000120 3c dc e5 1c 95 11 2f 7a b2 5a dd 28 8c 4e 7d 09 |<...../z.Z.(.N}.|
00000130 46 9e bb d5 de 3c cf d2 fa ce bf be 68 9d 32 1f |F....<......h.2.|
00000140 60 41 3a 23 28 74 15 33 4b c8 ba 4e c2 e3 7e 6e |`A:#(t.3K..N..~n|
00000150 75 e6 3a cc fd e4 ee ec e9 d7 37 c5 3a 7d b4 71 |u.:.......7.:}.q|
00000160 5d 54 89 1c 33 83 13 29 36 5f bd 48 f2 d0 a1 c2 |]T..3..)6_.H....|
00000170 d5 e3 4f d6 cb 62 ac 9d b0 b4 58 d9 59 53 9a a1 |..O..b....X.YS..|
00000180 4f d8 ab a4 2d 4d 46 09 f9 19 9e 0b 1d 0c ad 47 |O...-MF........G|
00000190 5d 9c ce fc 83 6e 59 2e 54 e6 9e 7e 6d 1f 27 85 |]....nY.T..~m.'.|
000001a0 b3 d7 3a 16 ad eb ee 1e fa f5 d5 1b f4 dd d5 f7 |..:.............|
000001b0 3b c3 62 f8 f6 4c 7d de b2 f4 db 7e 48 ae 00 fe |;.b..L}....~H...|
000001c0 ff ff 82 fe ff ff 02 30 1d 01 00 38 1a 00 00 fe |.......0...8....|
000001d0 ff ff 05 fe ff ff 01 00 00 00 01 30 1d 01 00 00 |...........0....|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=============================== StdErr Messages: ===============================
xz: (stdin): Compressed data is corrupt
xz: (stdin): Compressed data is corrupt
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
xz: (stdin): Compressed data is corrupt
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
Adv Reply
Originally Posted by darkod
Bookmarks