Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: 12.04 Install Issue

  1. #1
    Join Date
    May 2009
    Beans
    9

    12.04 Install Issue

    After upgrading my system from 11.10 to 12.04 I did the requisite restart and loaded up my system again. When it came to the screen where-in I choose which version of Ubuntu I will employ (i.e. "Ubuntu, with linux 3.2.0-24-generic" among others) and I choose any of them I get the following dialog:

    "error: no such partition."

    While I have been using Ubuntu for quite a while, I'm still fairly novice when it comes to the nuts and bolts of the system.
    I have already tried to do a re-install via an .iso disc but it did not change the problem. My goal here is to be able to keep all the data on my Hard Drive and have an operating OS. Any help would be most appreciative.

  2. #2
    Join Date
    Nov 2009
    Location
    Segur De Calafell, Spain
    Beans
    11,660
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: 12.04 Install Issue

    Do not reinstall, that usually creates one more install. And it can lose data sometimes, depending how it's done.

    Boot into live mode with the cd (Try Ubuntu), and in terminal post the output of:
    sudo fdisk -l (small L)
    Darko.
    -----------------------------------------------------------------------
    Ubuntu 12.04 LTS 64bit & Windows 7 Ultimate 64bit

  3. #3
    Join Date
    May 2009
    Beans
    9

    Re: 12.04 Install Issue

    Quote Originally Posted by darkod View Post
    Do not reinstall, that usually creates one more install. And it can lose data sometimes, depending how it's done.

    Boot into live mode with the cd (Try Ubuntu), and in terminal post the output of:
    sudo fdisk -l (small L)
    I'm going to assume that by "post the output of" you mean to reply with what I get when I put into terminal "sudo fdisk -l"
    Because I don't know what it relevant data here, I apologize in advance for the data-overflow that is about to happen.

    Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
    255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
    Units = sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disk identifier: 0x000280d6

    Device Boot Start End Blocks Id System
    /dev/sda1 * 2048 1242347478 621172715+ 83 Linux
    /dev/sda2 1242347518 1953523711 355588097 5 Extended
    /dev/sda5 1941448704 1953523711 6037504 82 Linux swap / Solaris
    /dev/sda6 1242347520 1929394175 343523328 83 Linux
    /dev/sda7 1929396224 1941438463 6021120 82 Linux swap / Solaris

    Partition table entries are not in disk order

    Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
    255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
    Units = sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disk identifier: 0xd192d192

    Device Boot Start End Blocks Id System
    /dev/sdb1 * 63 1941374924 970687431 83 Linux
    /dev/sdb2 1941374986 1953520064 6072539+ 5 Extended
    /dev/sdb5 1941374988 1953520064 6072538+ 82 Linux swap / Solaris

    Disk /dev/sdc: 20.0 GB, 20020396032 bytes
    255 heads, 63 sectors/track, 2434 cylinders, total 39102336 sectors
    Units = sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disk identifier: 0x0006f7a3

    Device Boot Start End Blocks Id System
    /dev/sdc1 * 2048 18691071 9344512 83 Linux
    /dev/sdc2 18692094 39100415 10204161 5 Extended
    /dev/sdc5 37382144 39100415 859136 82 Linux swap / Solaris
    /dev/sdc6 18692096 37382143 9345024 83 Linux

    Partition table entries are not in disk order

  4. #4
    Join Date
    Nov 2009
    Location
    Segur De Calafell, Spain
    Beans
    11,660
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: 12.04 Install Issue

    Yeah, I was after that. But you have loads of Linux partition as you can see yourself. Would you know which one is the installation you want to get going?

    Otherwise, run the boot info script from the link in my signature, and post the results as explained there. You can do all that from live mode too. Just be careful to execute the script from the same folder where it is, otherwise it will give you file not found error.
    Darko.
    -----------------------------------------------------------------------
    Ubuntu 12.04 LTS 64bit & Windows 7 Ultimate 64bit

  5. #5
    Join Date
    May 2009
    Beans
    9

    Re: 12.04 Install Issue

    Quote Originally Posted by darkod View Post
    Yeah, I was after that. But you have loads of Linux partition as you can see yourself. Would you know which one is the installation you want to get going?

    Otherwise, run the boot info script from the link in my signature, and post the results as explained there. You can do all that from live mode too. Just be careful to execute the script from the same folder where it is, otherwise it will give you file not found error.
    I don't know which is the partition in which all my cool stuff resides. I can easily find all that through the GUI File Browser, and I am not seeing anything in it that is telling me which partition it's in. Is there any way for me to figure it out?

  6. #6
    Join Date
    Nov 2009
    Location
    Segur De Calafell, Spain
    Beans
    11,660
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: 12.04 Install Issue

    I think it's best to run the boot info script as suggested in the last post. It will show all the details.
    Darko.
    -----------------------------------------------------------------------
    Ubuntu 12.04 LTS 64bit & Windows 7 Ultimate 64bit

  7. #7
    Join Date
    May 2009
    Beans
    9

    Re: 12.04 Install Issue

    Quote Originally Posted by darkod View Post
    I think it's best to run the boot info script as suggested in the last post. It will show all the details.
    Fair enough; now to shrug off the trepidation that I will do something wrong and thus lose all my files on this HD.

  8. #8
    Join Date
    May 2009
    Beans
    9

    Re: 12.04 Install Issue

    Alright, I've gotten the bootinfoscript to run for me; and I have the results. Though I don't want to pot the whole thing here as it is quite a lot of info there. Suggestions?

  9. #9
    Join Date
    Nov 2009
    Location
    Segur De Calafell, Spain
    Beans
    11,660
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: 12.04 Install Issue

    Are you worried about personal info, or just the size of the text?

    If you post it inside code tags, it will have a smaller scrollable window. You can also select all text and hit the # button in the toolbar when writing the post.
    Darko.
    -----------------------------------------------------------------------
    Ubuntu 12.04 LTS 64bit & Windows 7 Ultimate 64bit

  10. #10
    Join Date
    May 2009
    Beans
    9

    Re: 12.04 Install Issue

    Size of text. Did not know about the code part; this being the second time that I've used this forum.

    Code:
                      Boot Info Script 0.61      [1 April 2012]
    
    
    ============================= Boot Info Summary: ===============================
    
     => Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of 
        the same hard drive for core.img. core.img is at this location and looks 
        for (,msdos1)/boot/grub on this drive.
     => Grub Legacy (v0.97) is installed in the MBR of /dev/sdb and looks on the 
        same drive in partition #1 for /boot/grub/stage2 and /boot/grub/menu.lst.
     => Grub2 (v1.99) is installed in the MBR of /dev/sdc and looks at sector 1 of 
        the same hard drive for core.img. core.img is at this location and uses an 
        embedded config file:
        
        ---------------------------------------------------------------------------
        search.fs_uuid c4cabb0e-8279-4472-860b-c3d619524bd1 root 
        set prefix=($root)/boot/grub
        ---------------------------------------------------------------------------
        -----.
    
    sda1: __________________________________________________________________________
    
        File system:       ext4
        Boot sector type:  -
        Boot sector info: 
        Operating System:  Ubuntu 12.04 LTS
        Boot files:        /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
    
    sda2: __________________________________________________________________________
    
        File system:       Extended Partition
        Boot sector type:  Unknown
        Boot sector info: 
    
    sda5: __________________________________________________________________________
    
        File system:       swap
        Boot sector type:  -
        Boot sector info: 
    
    sda6: __________________________________________________________________________
    
        File system:       ext4
        Boot sector type:  -
        Boot sector info: 
        Operating System:  Ubuntu 10.04.2 LTS
        Boot files:        /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
    
    sda7: __________________________________________________________________________
    
        File system:       swap
        Boot sector type:  -
        Boot sector info: 
    
    sdb1: __________________________________________________________________________
    
        File system:       vfat
        Boot sector type:  FAT32
        Boot sector info:  According to the info in the boot sector, sdb1 starts 
                           at sector 0. But according to the info from fdisk, 
                           sdb1 starts at sector 63.
        Operating System:  
        Boot files:        
    
    sdb2: __________________________________________________________________________
    
        File system:       Extended Partition
        Boot sector type:  -
        Boot sector info: 
    
    sdb5: __________________________________________________________________________
    
        File system:       swap
        Boot sector type:  -
        Boot sector info: 
    
    sdc1: __________________________________________________________________________
    
        File system:       ext4
        Boot sector type:  Grub2 (v1.99)
        Boot sector info:  Grub2 (v1.99) is installed in the boot sector of sdc1 
                           and looks at sector 24655768 of the same hard drive 
                           for core.img. core.img is at this location and looks 
                           for (,msdos6)/boot/grub on this drive.
        Operating System:  Ubuntu 10.04.2 LTS
        Boot files:        /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
    
    sdc2: __________________________________________________________________________
    
        File system:       Extended Partition
        Boot sector type:  Unknown
        Boot sector info: 
    
    sdc5: __________________________________________________________________________
    
        File system:       swap
        Boot sector type:  -
        Boot sector info: 
    
    sdc6: __________________________________________________________________________
    
        File system:       ext4
        Boot sector type:  -
        Boot sector info: 
        Operating System:  Ubuntu 12.04 LTS
        Boot files:        /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
    
    ============================ Drive/Partition Info: =============================
    
    Drive: sda _____________________________________________________________________
    
    Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
    255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
    Units = sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    
    Partition  Boot  Start Sector    End Sector  # of Sectors  Id System
    
    /dev/sda1    *          2,048 1,242,347,478 1,242,345,431  83 Linux
    /dev/sda2       1,242,347,518 1,953,523,711   711,176,194   5 Extended
    /dev/sda5       1,941,448,704 1,953,523,711    12,075,008  82 Linux swap / Solaris
    /dev/sda6       1,242,347,520 1,929,394,175   687,046,656  83 Linux
    /dev/sda7       1,929,396,224 1,941,438,463    12,042,240  82 Linux swap / Solaris
    
    
    Drive: sdb _____________________________________________________________________
    
    Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
    255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
    Units = sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    
    Partition  Boot  Start Sector    End Sector  # of Sectors  Id System
    
    /dev/sdb1    *             63 1,941,374,924 1,941,374,862  83 Linux
    /dev/sdb2       1,941,374,986 1,953,520,064    12,145,079   5 Extended
    /dev/sdb5       1,941,374,988 1,953,520,064    12,145,077  82 Linux swap / Solaris
    
    
    Drive: sdc _____________________________________________________________________
    
    Disk /dev/sdc: 20.0 GB, 20020396032 bytes
    255 heads, 63 sectors/track, 2434 cylinders, total 39102336 sectors
    Units = sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    
    Partition  Boot  Start Sector    End Sector  # of Sectors  Id System
    
    /dev/sdc1    *          2,048    18,691,071    18,689,024  83 Linux
    /dev/sdc2          18,692,094    39,100,415    20,408,322   5 Extended
    /dev/sdc5          37,382,144    39,100,415     1,718,272  82 Linux swap / Solaris
    /dev/sdc6          18,692,096    37,382,143    18,690,048  83 Linux
    
    
    "blkid" output: ________________________________________________________________
    
    Device           UUID                                   TYPE       LABEL
    
    /dev/loop0                                              squashfs   
    /dev/sda1        c4cabb0e-8279-4472-860b-c3d619524bd1   ext4       
    /dev/sda5        295c7bf8-7aa6-425e-a6eb-a37b219b38ea   swap       
    /dev/sda6        4ba48cb5-dd06-484b-9ee2-09665d499f2f   ext4       
    /dev/sda7        090f88eb-967e-48b1-b5d1-1eb65545af39   swap       
    /dev/sdb1        8993-34B8                              vfat       Pegasus
    /dev/sdb5        39b3c9f0-97dd-4726-a94f-f657a8af794e   swap       
    /dev/sdc1        fa66fefd-ea62-4993-b761-abae20086aee   ext4       
    /dev/sdc5        d0514762-8937-42e3-9360-8639c3dc3d1b   swap       
    /dev/sdc6        cb2e8bda-3da7-48f4-af2a-c1bb5f948687   ext4       
    /dev/sr0                                                iso9660    Ubuntu 12.04 LTS amd64
    
    ================================ Mount points: =================================
    
    Device           Mount_Point              Type       Options
    
    /dev/loop0       /rofs                    squashfs   (ro,noatime)
    /dev/sda1        /media/c4cabb0e-8279-4472-860b-c3d619524bd1 ext4       (rw,nosuid,nodev,uhelper=udisks)
    /dev/sda6        /media/4ba48cb5-dd06-484b-9ee2-09665d499f2f ext4       (rw,nosuid,nodev,uhelper=udisks)
    /dev/sdc1        /media/fa66fefd-ea62-4993-b761-abae20086aee ext4       (rw,nosuid,nodev,uhelper=udisks)
    /dev/sdc6        /media/cb2e8bda-3da7-48f4-af2a-c1bb5f948687 ext4       (rw,nosuid,nodev,uhelper=udisks)
    /dev/sr0         /cdrom                   iso9660    (ro,noatime)
    
    
    =========================== sda1/boot/grub/grub.cfg: ===========================
    
    --------------------------------------------------------------------------------
    #
    # DO NOT EDIT THIS FILE
    #
    # It is automatically generated by grub-mkconfig using templates
    # from /etc/grub.d and settings from /etc/default/grub
    #
    
    ### BEGIN /etc/grub.d/00_header ###
    if [ -s $prefix/grubenv ]; then
      set have_grubenv=true
      load_env
    fi
    set default="0"
    if [ "${prev_saved_entry}" ]; then
      set saved_entry="${prev_saved_entry}"
      save_env saved_entry
      set prev_saved_entry=
      save_env prev_saved_entry
      set boot_once=true
    fi
    
    function savedefault {
      if [ -z "${boot_once}" ]; then
        saved_entry="${chosen}"
        save_env saved_entry
      fi
    }
    
    function recordfail {
      set recordfail=1
      if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
    }
    
    function load_video {
      insmod vbe
      insmod vga
      insmod video_bochs
      insmod video_cirrus
    }
    
    insmod part_msdos
    insmod ext2
    set root='(hd0,msdos1)'
    search --no-floppy --fs-uuid --set=root c4cabb0e-8279-4472-860b-c3d619524bd1
    if loadfont /usr/share/grub/unicode.pf2 ; then
      set gfxmode=auto
      load_video
      insmod gfxterm
      insmod part_msdos
      insmod ext2
      set root='(hd0,msdos1)'
      search --no-floppy --fs-uuid --set=root c4cabb0e-8279-4472-860b-c3d619524bd1
      set locale_dir=($root)/boot/grub/locale
      set lang=en_US
      insmod gettext
    fi
    terminal_output gfxterm
    if [ "${recordfail}" = 1 ]; then
      set timeout=-1
    else
      set timeout=10
    fi
    ### END /etc/grub.d/00_header ###
    
    ### BEGIN /etc/grub.d/05_debian_theme ###
    set menu_color_normal=white/black
    set menu_color_highlight=black/light-gray
    if background_color 44,0,30; then
      clear
    fi
    ### END /etc/grub.d/05_debian_theme ###
    
    ### BEGIN /etc/grub.d/10_linux ###
    function gfxmode {
        set gfxpayload="$1"
        if [ "$1" = "keep" ]; then
            set vt_handoff=vt.handoff=7
        else
            set vt_handoff=
        fi
    }
    if [ ${recordfail} != 1 ]; then
      if [ -e ${prefix}/gfxblacklist.txt ]; then
        if hwmatch ${prefix}/gfxblacklist.txt 3; then
          if [ ${match} = 0 ]; then
            set linux_gfx_mode=keep
          else
            set linux_gfx_mode=text
          fi
        else
          set linux_gfx_mode=text
        fi
      else
        set linux_gfx_mode=keep
      fi
    else
      set linux_gfx_mode=text
    fi
    export linux_gfx_mode
    if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
    menuentry 'Ubuntu, with Linux 3.2.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os {
        recordfail
        gfxmode $linux_gfx_mode
        insmod gzio
        insmod part_msdos
        insmod ext2
        set root='(hd0,msdos1)'
        search --no-floppy --fs-uuid --set=root c4cabb0e-8279-4472-860b-c3d619524bd1
        linux    /boot/vmlinuz-3.2.0-24-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro   quiet splash $vt_handoff
        initrd    /boot/initrd.img-3.2.0-24-generic
    }
    menuentry 'Ubuntu, with Linux 3.2.0-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
        recordfail
        insmod gzio
        insmod part_msdos
        insmod ext2
        set root='(hd0,msdos1)'
        search --no-floppy --fs-uuid --set=root c4cabb0e-8279-4472-860b-c3d619524bd1
        echo    'Loading Linux 3.2.0-24-generic ...'
        linux    /boot/vmlinuz-3.2.0-24-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro recovery nomodeset 
        echo    'Loading initial ramdisk ...'
        initrd    /boot/initrd.img-3.2.0-24-generic
    }
    submenu "Previous Linux versions" {
    menuentry 'Ubuntu, with Linux 3.0.0-17-generic' --class ubuntu --class gnu-linux --class gnu --class os {
        recordfail
        gfxmode $linux_gfx_mode
        insmod gzio
        insmod part_msdos
        insmod ext2
        set root='(hd0,msdos1)'
        search --no-floppy --fs-uuid --set=root c4cabb0e-8279-4472-860b-c3d619524bd1
        linux    /boot/vmlinuz-3.0.0-17-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro   quiet splash $vt_handoff
        initrd    /boot/initrd.img-3.0.0-17-generic
    }
    menuentry 'Ubuntu, with Linux 3.0.0-17-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
        recordfail
        insmod gzio
        insmod part_msdos
        insmod ext2
        set root='(hd0,msdos1)'
        search --no-floppy --fs-uuid --set=root c4cabb0e-8279-4472-860b-c3d619524bd1
        echo    'Loading Linux 3.0.0-17-generic ...'
        linux    /boot/vmlinuz-3.0.0-17-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro recovery nomodeset 
        echo    'Loading initial ramdisk ...'
        initrd    /boot/initrd.img-3.0.0-17-generic
    }
    menuentry 'Ubuntu, with Linux 2.6.38-11-generic' --class ubuntu --class gnu-linux --class gnu --class os {
        recordfail
        gfxmode $linux_gfx_mode
        insmod gzio
        insmod part_msdos
        insmod ext2
        set root='(hd0,msdos1)'
        search --no-floppy --fs-uuid --set=root c4cabb0e-8279-4472-860b-c3d619524bd1
        linux    /boot/vmlinuz-2.6.38-11-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro   quiet splash $vt_handoff
        initrd    /boot/initrd.img-2.6.38-11-generic
    }
    menuentry 'Ubuntu, with Linux 2.6.38-11-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
        recordfail
        insmod gzio
        insmod part_msdos
        insmod ext2
        set root='(hd0,msdos1)'
        search --no-floppy --fs-uuid --set=root c4cabb0e-8279-4472-860b-c3d619524bd1
        echo    'Loading Linux 2.6.38-11-generic ...'
        linux    /boot/vmlinuz-2.6.38-11-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro recovery nomodeset 
        echo    'Loading initial ramdisk ...'
        initrd    /boot/initrd.img-2.6.38-11-generic
    }
    menuentry 'Ubuntu, with Linux 2.6.35-28-generic' --class ubuntu --class gnu-linux --class gnu --class os {
        recordfail
        gfxmode $linux_gfx_mode
        insmod gzio
        insmod part_msdos
        insmod ext2
        set root='(hd0,msdos1)'
        search --no-floppy --fs-uuid --set=root c4cabb0e-8279-4472-860b-c3d619524bd1
        linux    /boot/vmlinuz-2.6.35-28-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro   quiet splash $vt_handoff
        initrd    /boot/initrd.img-2.6.35-28-generic
    }
    menuentry 'Ubuntu, with Linux 2.6.35-28-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
        recordfail
        insmod gzio
        insmod part_msdos
        insmod ext2
        set root='(hd0,msdos1)'
        search --no-floppy --fs-uuid --set=root c4cabb0e-8279-4472-860b-c3d619524bd1
        echo    'Loading Linux 2.6.35-28-generic ...'
        linux    /boot/vmlinuz-2.6.35-28-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro recovery nomodeset 
        echo    'Loading initial ramdisk ...'
        initrd    /boot/initrd.img-2.6.35-28-generic
    }
    menuentry 'Ubuntu, with Linux 2.6.32-30-generic' --class ubuntu --class gnu-linux --class gnu --class os {
        recordfail
        gfxmode $linux_gfx_mode
        insmod gzio
        insmod part_msdos
        insmod ext2
        set root='(hd0,msdos1)'
        search --no-floppy --fs-uuid --set=root c4cabb0e-8279-4472-860b-c3d619524bd1
        linux    /boot/vmlinuz-2.6.32-30-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro   quiet splash $vt_handoff
        initrd    /boot/initrd.img-2.6.32-30-generic
    }
    menuentry 'Ubuntu, with Linux 2.6.32-30-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
        recordfail
        insmod gzio
        insmod part_msdos
        insmod ext2
        set root='(hd0,msdos1)'
        search --no-floppy --fs-uuid --set=root c4cabb0e-8279-4472-860b-c3d619524bd1
        echo    'Loading Linux 2.6.32-30-generic ...'
        linux    /boot/vmlinuz-2.6.32-30-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro recovery nomodeset 
        echo    'Loading initial ramdisk ...'
        initrd    /boot/initrd.img-2.6.32-30-generic
    }
    }
    ### END /etc/grub.d/10_linux ###
    
    ### BEGIN /etc/grub.d/20_linux_xen ###
    ### END /etc/grub.d/20_linux_xen ###
    
    ### BEGIN /etc/grub.d/20_memtest86+ ###
    menuentry "Memory test (memtest86+)" {
        insmod part_msdos
        insmod ext2
        set root='(hd0,msdos1)'
        search --no-floppy --fs-uuid --set=root c4cabb0e-8279-4472-860b-c3d619524bd1
        linux16    /boot/memtest86+.bin
    }
    menuentry "Memory test (memtest86+, serial console 115200)" {
        insmod part_msdos
        insmod ext2
        set root='(hd0,msdos1)'
        search --no-floppy --fs-uuid --set=root c4cabb0e-8279-4472-860b-c3d619524bd1
        linux16    /boot/memtest86+.bin console=ttyS0,115200n8
    }
    ### END /etc/grub.d/20_memtest86+ ###
    
    ### BEGIN /etc/grub.d/30_os-prober ###
    menuentry "Ubuntu, with Linux 2.6.32-28-generic (on /dev/sda6)" --class gnu-linux --class gnu --class os {
        insmod part_msdos
        insmod ext2
        set root='(hd0,msdos6)'
        search --no-floppy --fs-uuid --set=root 4ba48cb5-dd06-484b-9ee2-09665d499f2f
        linux /boot/vmlinuz-2.6.32-28-generic root=UUID=4ba48cb5-dd06-484b-9ee2-09665d499f2f ro quiet splash
        initrd /boot/initrd.img-2.6.32-28-generic
    }
    menuentry "Ubuntu, with Linux 2.6.32-28-generic (recovery mode) (on /dev/sda6)" --class gnu-linux --class gnu --class os {
        insmod part_msdos
        insmod ext2
        set root='(hd0,msdos6)'
        search --no-floppy --fs-uuid --set=root 4ba48cb5-dd06-484b-9ee2-09665d499f2f
        linux /boot/vmlinuz-2.6.32-28-generic root=UUID=4ba48cb5-dd06-484b-9ee2-09665d499f2f ro single
        initrd /boot/initrd.img-2.6.32-28-generic
    }
    menuentry "Ubuntu, with Linux 2.6.32-28-generic (on /dev/sdc1)" --class gnu-linux --class gnu --class os {
        insmod part_msdos
        insmod ext2
        set root='(hd2,msdos1)'
        search --no-floppy --fs-uuid --set=root fa66fefd-ea62-4993-b761-abae20086aee
        linux /boot/vmlinuz-2.6.32-28-generic root=UUID=fa66fefd-ea62-4993-b761-abae20086aee ro quiet splash
        initrd /boot/initrd.img-2.6.32-28-generic
    }
    menuentry "Ubuntu, with Linux 2.6.32-28-generic (recovery mode) (on /dev/sdc1)" --class gnu-linux --class gnu --class os {
        insmod part_msdos
        insmod ext2
        set root='(hd2,msdos1)'
        search --no-floppy --fs-uuid --set=root fa66fefd-ea62-4993-b761-abae20086aee
        linux /boot/vmlinuz-2.6.32-28-generic root=UUID=fa66fefd-ea62-4993-b761-abae20086aee ro single
        initrd /boot/initrd.img-2.6.32-28-generic
    }
    ### END /etc/grub.d/30_os-prober ###
    
    ### BEGIN /etc/grub.d/40_custom ###
    # This file provides an easy way to add custom menu entries.  Simply type the
    # menu entries you want to add after this comment.  Be careful not to change
    # the 'exec tail' line above.
    ### END /etc/grub.d/40_custom ###
    
    ### BEGIN /etc/grub.d/41_custom ###
    if [ -f  $prefix/custom.cfg ]; then
      source $prefix/custom.cfg;
    fi
    ### END /etc/grub.d/41_custom ###
    --------------------------------------------------------------------------------
    
    =============================== sda1/etc/fstab: ================================
    
    --------------------------------------------------------------------------------
    # /etc/fstab: static file system information.
    #
    # Use 'blkid -o value -s UUID' to print the universally unique identifier
    # for a device; this may be used with UUID= as a more robust way to name
    # devices that works even if disks are added and removed. See fstab(5).
    #
    # <file system> <mount point>   <type>  <options>       <dump>  <pass>
    proc            /proc           proc    nodev,noexec,nosuid 0       0
    # / was on /dev/sdb1 during installation
    UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 /               ext4    errors=remount-ro 0       1
    # swap was on /dev/sda5 during installation
    UUID=d0514762-8937-42e3-9360-8639c3dc3d1b none            swap    sw              0       0
    # swap was on /dev/sdb5 during installation
    UUID=295c7bf8-7aa6-425e-a6eb-a37b219b38ea none            swap    sw              0       0
    # swap was on /dev/sdc5 during installation
    UUID=39b3c9f0-97dd-4726-a94f-f657a8af794e none            swap    sw              0       0
    /dev/fd0        /media/floppy0  auto    rw,user,noauto,exec,utf8 0       0
    --------------------------------------------------------------------------------
    
    =================== sda1: Location of files loaded by Grub: ====================
    
               GiB - GB             File                                 Fragment(s)
    
                   =                boot/grub/core.img                             1
                   =                boot/grub/grub.cfg                             1
                   =                boot/initrd.img-2.6.32-30-generic              2
                   =                boot/initrd.img-2.6.35-28-generic              2
                   =                boot/initrd.img-2.6.38-11-generic              2
                   =                boot/initrd.img-3.0.0-17-generic               2
                   =                boot/initrd.img-3.2.0-24-generic               2
                   =                boot/vmlinuz-2.6.32-30-generic                 1
                   =                boot/vmlinuz-2.6.35-28-generic                 1
                   =                boot/vmlinuz-2.6.38-11-generic                 2
                   =                boot/vmlinuz-3.0.0-17-generic                  2
                   =                boot/vmlinuz-3.2.0-24-generic                  1
                   =                vmlinuz                                        1
                   =                vmlinuz.old                                    2
    
    =========================== sda6/boot/grub/grub.cfg: ===========================
    
    --------------------------------------------------------------------------------
    #
    # DO NOT EDIT THIS FILE
    #
    # It is automatically generated by /usr/sbin/grub-mkconfig using templates
    # from /etc/grub.d and settings from /etc/default/grub
    #
    
    ### BEGIN /etc/grub.d/00_header ###
    if [ -s $prefix/grubenv ]; then
      load_env
    fi
    set default="0"
    if [ ${prev_saved_entry} ]; then
      set saved_entry=${prev_saved_entry}
      save_env saved_entry
      set prev_saved_entry=
      save_env prev_saved_entry
      set boot_once=true
    fi
    
    function savedefault {
      if [ -z ${boot_once} ]; then
        saved_entry=${chosen}
        save_env saved_entry
      fi
    }
    
    function recordfail {
      set recordfail=1
      if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
    }
    insmod ext2
    set root='(hd1,6)'
    search --no-floppy --fs-uuid --set 4ba48cb5-dd06-484b-9ee2-09665d499f2f
    if loadfont /usr/share/grub/unicode.pf2 ; then
      set gfxmode=640x480
      insmod gfxterm
      insmod vbe
      if terminal_output gfxterm ; then true ; else
        # For backward compatibility with versions of terminal.mod that don't
        # understand terminal_output
        terminal gfxterm
      fi
    fi
    insmod ext2
    set root='(hd1,6)'
    search --no-floppy --fs-uuid --set 4ba48cb5-dd06-484b-9ee2-09665d499f2f
    set locale_dir=($root)/boot/grub/locale
    set lang=en
    insmod gettext
    if [ ${recordfail} = 1 ]; then
      set timeout=-1
    else
      set timeout=10
    fi
    ### END /etc/grub.d/00_header ###
    
    ### BEGIN /etc/grub.d/05_debian_theme ###
    set menu_color_normal=white/black
    set menu_color_highlight=black/light-gray
    ### END /etc/grub.d/05_debian_theme ###
    
    ### BEGIN /etc/grub.d/10_linux ###
    menuentry 'Ubuntu, with Linux 2.6.32-28-generic' --class ubuntu --class gnu-linux --class gnu --class os {
        recordfail
        insmod ext2
        set root='(hd1,6)'
        search --no-floppy --fs-uuid --set 4ba48cb5-dd06-484b-9ee2-09665d499f2f
        linux    /boot/vmlinuz-2.6.32-28-generic root=UUID=4ba48cb5-dd06-484b-9ee2-09665d499f2f ro   quiet splash
        initrd    /boot/initrd.img-2.6.32-28-generic
    }
    menuentry 'Ubuntu, with Linux 2.6.32-28-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
        recordfail
        insmod ext2
        set root='(hd1,6)'
        search --no-floppy --fs-uuid --set 4ba48cb5-dd06-484b-9ee2-09665d499f2f
        echo    'Loading Linux 2.6.32-28-generic ...'
        linux    /boot/vmlinuz-2.6.32-28-generic root=UUID=4ba48cb5-dd06-484b-9ee2-09665d499f2f ro single 
        echo    'Loading initial ramdisk ...'
        initrd    /boot/initrd.img-2.6.32-28-generic
    }
    ### END /etc/grub.d/10_linux ###
    
    ### BEGIN /etc/grub.d/20_memtest86+ ###
    menuentry "Memory test (memtest86+)" {
        insmod ext2
        set root='(hd1,6)'
        search --no-floppy --fs-uuid --set 4ba48cb5-dd06-484b-9ee2-09665d499f2f
        linux16    /boot/memtest86+.bin
    }
    menuentry "Memory test (memtest86+, serial console 115200)" {
        insmod ext2
        set root='(hd1,6)'
        search --no-floppy --fs-uuid --set 4ba48cb5-dd06-484b-9ee2-09665d499f2f
        linux16    /boot/memtest86+.bin console=ttyS0,115200n8
    }
    ### END /etc/grub.d/20_memtest86+ ###
    
    ### BEGIN /etc/grub.d/30_os-prober ###
    menuentry "Ubuntu, with Linux 2.6.38-8-generic (on /dev/sdb1)" {
        insmod ext2
        set root='(hd1,1)'
        search --no-floppy --fs-uuid --set c4cabb0e-8279-4472-860b-c3d619524bd1
        linux /boot/vmlinuz-2.6.38-8-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro quiet splash vt.handoff=7
        initrd /boot/initrd.img-2.6.38-8-generic
    }
    menuentry "Ubuntu, with Linux 2.6.38-8-generic (recovery mode) (on /dev/sdb1)" {
        insmod ext2
        set root='(hd1,1)'
        search --no-floppy --fs-uuid --set c4cabb0e-8279-4472-860b-c3d619524bd1
        linux /boot/vmlinuz-2.6.38-8-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro single
        initrd /boot/initrd.img-2.6.38-8-generic
    }
    menuentry "Ubuntu, with Linux 2.6.35-28-generic (on /dev/sdb1)" {
        insmod ext2
        set root='(hd1,1)'
        search --no-floppy --fs-uuid --set c4cabb0e-8279-4472-860b-c3d619524bd1
        linux /boot/vmlinuz-2.6.35-28-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro quiet splash vt.handoff=7
        initrd /boot/initrd.img-2.6.35-28-generic
    }
    menuentry "Ubuntu, with Linux 2.6.35-28-generic (recovery mode) (on /dev/sdb1)" {
        insmod ext2
        set root='(hd1,1)'
        search --no-floppy --fs-uuid --set c4cabb0e-8279-4472-860b-c3d619524bd1
        linux /boot/vmlinuz-2.6.35-28-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro single
        initrd /boot/initrd.img-2.6.35-28-generic
    }
    menuentry "Ubuntu, with Linux 2.6.32-30-generic (on /dev/sdb1)" {
        insmod ext2
        set root='(hd1,1)'
        search --no-floppy --fs-uuid --set c4cabb0e-8279-4472-860b-c3d619524bd1
        linux /boot/vmlinuz-2.6.32-30-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro quiet splash vt.handoff=7
        initrd /boot/initrd.img-2.6.32-30-generic
    }
    menuentry "Ubuntu, with Linux 2.6.32-30-generic (recovery mode) (on /dev/sdb1)" {
        insmod ext2
        set root='(hd1,1)'
        search --no-floppy --fs-uuid --set c4cabb0e-8279-4472-860b-c3d619524bd1
        linux /boot/vmlinuz-2.6.32-30-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro single
        initrd /boot/initrd.img-2.6.32-30-generic
    }
    ### END /etc/grub.d/30_os-prober ###
    
    ### BEGIN /etc/grub.d/40_custom ###
    # This file provides an easy way to add custom menu entries.  Simply type the
    # menu entries you want to add after this comment.  Be careful not to change
    # the 'exec tail' line above.
    ### END /etc/grub.d/40_custom ###
    --------------------------------------------------------------------------------
    
    =============================== sda6/etc/fstab: ================================
    
    --------------------------------------------------------------------------------
    # /etc/fstab: static file system information.
    #
    # Use 'blkid -o value -s UUID' to print the universally unique identifier
    # for a device; this may be used with UUID= as a more robust way to name
    # devices that works even if disks are added and removed. See fstab(5).
    #
    # <file system> <mount point>   <type>  <options>       <dump>  <pass>
    proc            /proc           proc    nodev,noexec,nosuid 0       0
    # / was on /dev/sdb6 during installation
    UUID=4ba48cb5-dd06-484b-9ee2-09665d499f2f /               ext4    errors=remount-ro 0       1
    # swap was on /dev/sdb7 during installation
    UUID=090f88eb-967e-48b1-b5d1-1eb65545af39 none            swap    sw              0       0
    /dev/fd0        /media/floppy0  auto    rw,user,noauto,exec,utf8 0       0
    --------------------------------------------------------------------------------
    
    =================== sda6: Location of files loaded by Grub: ====================
    
               GiB - GB             File                                 Fragment(s)
    
                   =                boot/grub/core.img                             1
                   =                boot/grub/grub.cfg                             1
                   =                boot/initrd.img-2.6.32-28-generic              1
                   =                boot/vmlinuz-2.6.32-28-generic                 1
                   =                initrd.img                                     1
                   =                vmlinuz                                        1
    
    =========================== sdc1/boot/grub/grub.cfg: ===========================
    
    --------------------------------------------------------------------------------
    #
    # DO NOT EDIT THIS FILE
    #
    # It is automatically generated by /usr/sbin/grub-mkconfig using templates
    # from /etc/grub.d and settings from /etc/default/grub
    #
    
    ### BEGIN /etc/grub.d/00_header ###
    if [ -s $prefix/grubenv ]; then
      load_env
    fi
    set default="0"
    if [ ${prev_saved_entry} ]; then
      set saved_entry=${prev_saved_entry}
      save_env saved_entry
      set prev_saved_entry=
      save_env prev_saved_entry
      set boot_once=true
    fi
    
    function savedefault {
      if [ -z ${boot_once} ]; then
        saved_entry=${chosen}
        save_env saved_entry
      fi
    }
    
    function recordfail {
      set recordfail=1
      if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
    }
    insmod ext2
    set root='(hd0,1)'
    search --no-floppy --fs-uuid --set fa66fefd-ea62-4993-b761-abae20086aee
    if loadfont /usr/share/grub/unicode.pf2 ; then
      set gfxmode=640x480
      insmod gfxterm
      insmod vbe
      if terminal_output gfxterm ; then true ; else
        # For backward compatibility with versions of terminal.mod that don't
        # understand terminal_output
        terminal gfxterm
      fi
    fi
    insmod ext2
    set root='(hd0,1)'
    search --no-floppy --fs-uuid --set fa66fefd-ea62-4993-b761-abae20086aee
    set locale_dir=($root)/boot/grub/locale
    set lang=en
    insmod gettext
    if [ ${recordfail} = 1 ]; then
      set timeout=-1
    else
      set timeout=10
    fi
    ### END /etc/grub.d/00_header ###
    
    ### BEGIN /etc/grub.d/05_debian_theme ###
    set menu_color_normal=white/black
    set menu_color_highlight=black/light-gray
    ### END /etc/grub.d/05_debian_theme ###
    
    ### BEGIN /etc/grub.d/10_linux ###
    menuentry 'Ubuntu, with Linux 2.6.32-28-generic' --class ubuntu --class gnu-linux --class gnu --class os {
        recordfail
        insmod ext2
        set root='(hd0,1)'
        search --no-floppy --fs-uuid --set fa66fefd-ea62-4993-b761-abae20086aee
        linux    /boot/vmlinuz-2.6.32-28-generic root=UUID=fa66fefd-ea62-4993-b761-abae20086aee ro   quiet splash
        initrd    /boot/initrd.img-2.6.32-28-generic
    }
    menuentry 'Ubuntu, with Linux 2.6.32-28-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
        recordfail
        insmod ext2
        set root='(hd0,1)'
        search --no-floppy --fs-uuid --set fa66fefd-ea62-4993-b761-abae20086aee
        echo    'Loading Linux 2.6.32-28-generic ...'
        linux    /boot/vmlinuz-2.6.32-28-generic root=UUID=fa66fefd-ea62-4993-b761-abae20086aee ro single 
        echo    'Loading initial ramdisk ...'
        initrd    /boot/initrd.img-2.6.32-28-generic
    }
    ### END /etc/grub.d/10_linux ###
    
    ### BEGIN /etc/grub.d/20_memtest86+ ###
    menuentry "Memory test (memtest86+)" {
        insmod ext2
        set root='(hd0,1)'
        search --no-floppy --fs-uuid --set fa66fefd-ea62-4993-b761-abae20086aee
        linux16    /boot/memtest86+.bin
    }
    menuentry "Memory test (memtest86+, serial console 115200)" {
        insmod ext2
        set root='(hd0,1)'
        search --no-floppy --fs-uuid --set fa66fefd-ea62-4993-b761-abae20086aee
        linux16    /boot/memtest86+.bin console=ttyS0,115200n8
    }
    ### END /etc/grub.d/20_memtest86+ ###
    
    ### BEGIN /etc/grub.d/30_os-prober ###
    menuentry "Ubuntu, with Linux 3.0.0-12-generic (on /dev/sdb1)" {
        insmod ext2
        set root='(hd1,1)'
        search --no-floppy --fs-uuid --set c4cabb0e-8279-4472-860b-c3d619524bd1
        linux /boot/vmlinuz-3.0.0-12-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro quiet splash vt.handoff=7
        initrd /boot/initrd.img-3.0.0-12-generic
    }
    menuentry "Ubuntu, with Linux 3.0.0-12-generic (recovery mode) (on /dev/sdb1)" {
        insmod ext2
        set root='(hd1,1)'
        search --no-floppy --fs-uuid --set c4cabb0e-8279-4472-860b-c3d619524bd1
        linux /boot/vmlinuz-3.0.0-12-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro recovery nomodeset
        initrd /boot/initrd.img-3.0.0-12-generic
    }
    menuentry "Ubuntu, with Linux 2.6.38-11-generic (on /dev/sdb1)" {
        insmod ext2
        set root='(hd1,1)'
        search --no-floppy --fs-uuid --set c4cabb0e-8279-4472-860b-c3d619524bd1
        linux /boot/vmlinuz-2.6.38-11-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro quiet splash vt.handoff=7
        initrd /boot/initrd.img-2.6.38-11-generic
    }
    menuentry "Ubuntu, with Linux 2.6.38-11-generic (recovery mode) (on /dev/sdb1)" {
        insmod ext2
        set root='(hd1,1)'
        search --no-floppy --fs-uuid --set c4cabb0e-8279-4472-860b-c3d619524bd1
        linux /boot/vmlinuz-2.6.38-11-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro recovery nomodeset
        initrd /boot/initrd.img-2.6.38-11-generic
    }
    menuentry "Ubuntu, with Linux 2.6.35-28-generic (on /dev/sdb1)" {
        insmod ext2
        set root='(hd1,1)'
        search --no-floppy --fs-uuid --set c4cabb0e-8279-4472-860b-c3d619524bd1
        linux /boot/vmlinuz-2.6.35-28-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro quiet splash vt.handoff=7
        initrd /boot/initrd.img-2.6.35-28-generic
    }
    menuentry "Ubuntu, with Linux 2.6.35-28-generic (recovery mode) (on /dev/sdb1)" {
        insmod ext2
        set root='(hd1,1)'
        search --no-floppy --fs-uuid --set c4cabb0e-8279-4472-860b-c3d619524bd1
        linux /boot/vmlinuz-2.6.35-28-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro recovery nomodeset
        initrd /boot/initrd.img-2.6.35-28-generic
    }
    menuentry "Ubuntu, with Linux 2.6.32-30-generic (on /dev/sdb1)" {
        insmod ext2
        set root='(hd1,1)'
        search --no-floppy --fs-uuid --set c4cabb0e-8279-4472-860b-c3d619524bd1
        linux /boot/vmlinuz-2.6.32-30-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro quiet splash vt.handoff=7
        initrd /boot/initrd.img-2.6.32-30-generic
    }
    menuentry "Ubuntu, with Linux 2.6.32-30-generic (recovery mode) (on /dev/sdb1)" {
        insmod ext2
        set root='(hd1,1)'
        search --no-floppy --fs-uuid --set c4cabb0e-8279-4472-860b-c3d619524bd1
        linux /boot/vmlinuz-2.6.32-30-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro recovery nomodeset
        initrd /boot/initrd.img-2.6.32-30-generic
    }
    menuentry "Ubuntu, with Linux 2.6.32-28-generic (on /dev/sdb6)" {
        insmod ext2
        set root='(hd1,6)'
        search --no-floppy --fs-uuid --set 4ba48cb5-dd06-484b-9ee2-09665d499f2f
        linux /boot/vmlinuz-2.6.32-28-generic root=UUID=4ba48cb5-dd06-484b-9ee2-09665d499f2f ro quiet splash
        initrd /boot/initrd.img-2.6.32-28-generic
    }
    menuentry "Ubuntu, with Linux 2.6.32-28-generic (recovery mode) (on /dev/sdb6)" {
        insmod ext2
        set root='(hd1,6)'
        search --no-floppy --fs-uuid --set 4ba48cb5-dd06-484b-9ee2-09665d499f2f
        linux /boot/vmlinuz-2.6.32-28-generic root=UUID=4ba48cb5-dd06-484b-9ee2-09665d499f2f ro single
        initrd /boot/initrd.img-2.6.32-28-generic
    }
    ### END /etc/grub.d/30_os-prober ###
    
    ### BEGIN /etc/grub.d/40_custom ###
    # This file provides an easy way to add custom menu entries.  Simply type the
    # menu entries you want to add after this comment.  Be careful not to change
    # the 'exec tail' line above.
    ### END /etc/grub.d/40_custom ###
    --------------------------------------------------------------------------------
    
    =============================== sdc1/etc/fstab: ================================
    
    --------------------------------------------------------------------------------
    # /etc/fstab: static file system information.
    #
    # Use 'blkid -o value -s UUID' to print the universally unique identifier
    # for a device; this may be used with UUID= as a more robust way to name
    # devices that works even if disks are added and removed. See fstab(5).
    #
    # <file system> <mount point>   <type>  <options>       <dump>  <pass>
    proc            /proc           proc    nodev,noexec,nosuid 0       0
    /dev/sda1       /               ext4    errors=remount-ro 0       1
    # swap was on /dev/sda5 during installation
    UUID=d0514762-8937-42e3-9360-8639c3dc3d1b none            swap    sw              0       0
    /dev/fd0        /media/floppy0  auto    rw,user,noauto,exec,utf8 0       0
    --------------------------------------------------------------------------------
    
    =================== sdc1: Location of files loaded by Grub: ====================
    
               GiB - GB             File                                 Fragment(s)
    
                   =                boot/grub/core.img                             1
                   =                boot/grub/grub.cfg                             1
                   =                boot/initrd.img-2.6.32-28-generic              1
                   =                boot/vmlinuz-2.6.32-28-generic                 1
                   =                initrd.img                                     1
                   =                vmlinuz                                        1
    
    =========================== sdc6/boot/grub/grub.cfg: ===========================
    
    --------------------------------------------------------------------------------
    #
    # DO NOT EDIT THIS FILE
    #
    # It is automatically generated by grub-mkconfig using templates
    # from /etc/grub.d and settings from /etc/default/grub
    #
    
    ### BEGIN /etc/grub.d/00_header ###
    if [ -s $prefix/grubenv ]; then
      set have_grubenv=true
      load_env
    fi
    set default="0"
    if [ "${prev_saved_entry}" ]; then
      set saved_entry="${prev_saved_entry}"
      save_env saved_entry
      set prev_saved_entry=
      save_env prev_saved_entry
      set boot_once=true
    fi
    
    function savedefault {
      if [ -z "${boot_once}" ]; then
        saved_entry="${chosen}"
        save_env saved_entry
      fi
    }
    
    function recordfail {
      set recordfail=1
      if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
    }
    
    function load_video {
      insmod vbe
      insmod vga
      insmod video_bochs
      insmod video_cirrus
    }
    
    insmod part_msdos
    insmod ext2
    set root='(hd2,msdos6)'
    search --no-floppy --fs-uuid --set=root cb2e8bda-3da7-48f4-af2a-c1bb5f948687
    if loadfont /usr/share/grub/unicode.pf2 ; then
      set gfxmode=auto
      load_video
      insmod gfxterm
      insmod part_msdos
      insmod ext2
      set root='(hd2,msdos6)'
      search --no-floppy --fs-uuid --set=root cb2e8bda-3da7-48f4-af2a-c1bb5f948687
      set locale_dir=($root)/boot/grub/locale
      set lang=en_US
      insmod gettext
    fi
    terminal_output gfxterm
    if [ "${recordfail}" = 1 ]; then
      set timeout=-1
    else
      set timeout=10
    fi
    ### END /etc/grub.d/00_header ###
    
    ### BEGIN /etc/grub.d/05_debian_theme ###
    set menu_color_normal=white/black
    set menu_color_highlight=black/light-gray
    if background_color 44,0,30; then
      clear
    fi
    ### END /etc/grub.d/05_debian_theme ###
    
    ### BEGIN /etc/grub.d/10_linux ###
    function gfxmode {
        set gfxpayload="$1"
        if [ "$1" = "keep" ]; then
            set vt_handoff=vt.handoff=7
        else
            set vt_handoff=
        fi
    }
    if [ ${recordfail} != 1 ]; then
      if [ -e ${prefix}/gfxblacklist.txt ]; then
        if hwmatch ${prefix}/gfxblacklist.txt 3; then
          if [ ${match} = 0 ]; then
            set linux_gfx_mode=keep
          else
            set linux_gfx_mode=text
          fi
        else
          set linux_gfx_mode=text
        fi
      else
        set linux_gfx_mode=keep
      fi
    else
      set linux_gfx_mode=text
    fi
    export linux_gfx_mode
    if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
    menuentry 'Ubuntu, with Linux 3.2.0-23-generic' --class ubuntu --class gnu-linux --class gnu --class os {
        recordfail
        gfxmode $linux_gfx_mode
        insmod gzio
        insmod part_msdos
        insmod ext2
        set root='(hd2,msdos6)'
        search --no-floppy --fs-uuid --set=root cb2e8bda-3da7-48f4-af2a-c1bb5f948687
        linux    /boot/vmlinuz-3.2.0-23-generic root=UUID=cb2e8bda-3da7-48f4-af2a-c1bb5f948687 ro   quiet splash $vt_handoff
        initrd    /boot/initrd.img-3.2.0-23-generic
    }
    menuentry 'Ubuntu, with Linux 3.2.0-23-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
        recordfail
        insmod gzio
        insmod part_msdos
        insmod ext2
        set root='(hd2,msdos6)'
        search --no-floppy --fs-uuid --set=root cb2e8bda-3da7-48f4-af2a-c1bb5f948687
        echo    'Loading Linux 3.2.0-23-generic ...'
        linux    /boot/vmlinuz-3.2.0-23-generic root=UUID=cb2e8bda-3da7-48f4-af2a-c1bb5f948687 ro recovery nomodeset 
        echo    'Loading initial ramdisk ...'
        initrd    /boot/initrd.img-3.2.0-23-generic
    }
    ### END /etc/grub.d/10_linux ###
    
    ### BEGIN /etc/grub.d/20_linux_xen ###
    ### END /etc/grub.d/20_linux_xen ###
    
    ### BEGIN /etc/grub.d/20_memtest86+ ###
    menuentry "Memory test (memtest86+)" {
        insmod part_msdos
        insmod ext2
        set root='(hd2,msdos6)'
        search --no-floppy --fs-uuid --set=root cb2e8bda-3da7-48f4-af2a-c1bb5f948687
        linux16    /boot/memtest86+.bin
    }
    menuentry "Memory test (memtest86+, serial console 115200)" {
        insmod part_msdos
        insmod ext2
        set root='(hd2,msdos6)'
        search --no-floppy --fs-uuid --set=root cb2e8bda-3da7-48f4-af2a-c1bb5f948687
        linux16    /boot/memtest86+.bin console=ttyS0,115200n8
    }
    ### END /etc/grub.d/20_memtest86+ ###
    
    ### BEGIN /etc/grub.d/30_os-prober ###
    menuentry "Ubuntu, with Linux 3.2.0-24-generic (on /dev/sda1)" --class gnu-linux --class gnu --class os {
        insmod part_msdos
        insmod ext2
        set root='(hd0,msdos1)'
        search --no-floppy --fs-uuid --set=root c4cabb0e-8279-4472-860b-c3d619524bd1
        linux /boot/vmlinuz-3.2.0-24-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro quiet splash $vt_handoff
        initrd /boot/initrd.img-3.2.0-24-generic
    }
    menuentry "Ubuntu, with Linux 3.2.0-24-generic (recovery mode) (on /dev/sda1)" --class gnu-linux --class gnu --class os {
        insmod part_msdos
        insmod ext2
        set root='(hd0,msdos1)'
        search --no-floppy --fs-uuid --set=root c4cabb0e-8279-4472-860b-c3d619524bd1
        linux /boot/vmlinuz-3.2.0-24-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro recovery nomodeset
        initrd /boot/initrd.img-3.2.0-24-generic
    }
    menuentry "Ubuntu, with Linux 3.0.0-17-generic (on /dev/sda1)" --class gnu-linux --class gnu --class os {
        insmod part_msdos
        insmod ext2
        set root='(hd0,msdos1)'
        search --no-floppy --fs-uuid --set=root c4cabb0e-8279-4472-860b-c3d619524bd1
        linux /boot/vmlinuz-3.0.0-17-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro quiet splash $vt_handoff
        initrd /boot/initrd.img-3.0.0-17-generic
    }
    menuentry "Ubuntu, with Linux 3.0.0-17-generic (recovery mode) (on /dev/sda1)" --class gnu-linux --class gnu --class os {
        insmod part_msdos
        insmod ext2
        set root='(hd0,msdos1)'
        search --no-floppy --fs-uuid --set=root c4cabb0e-8279-4472-860b-c3d619524bd1
        linux /boot/vmlinuz-3.0.0-17-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro recovery nomodeset
        initrd /boot/initrd.img-3.0.0-17-generic
    }
    menuentry "Ubuntu, with Linux 2.6.38-11-generic (on /dev/sda1)" --class gnu-linux --class gnu --class os {
        insmod part_msdos
        insmod ext2
        set root='(hd0,msdos1)'
        search --no-floppy --fs-uuid --set=root c4cabb0e-8279-4472-860b-c3d619524bd1
        linux /boot/vmlinuz-2.6.38-11-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro quiet splash $vt_handoff
        initrd /boot/initrd.img-2.6.38-11-generic
    }
    menuentry "Ubuntu, with Linux 2.6.38-11-generic (recovery mode) (on /dev/sda1)" --class gnu-linux --class gnu --class os {
        insmod part_msdos
        insmod ext2
        set root='(hd0,msdos1)'
        search --no-floppy --fs-uuid --set=root c4cabb0e-8279-4472-860b-c3d619524bd1
        linux /boot/vmlinuz-2.6.38-11-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro recovery nomodeset
        initrd /boot/initrd.img-2.6.38-11-generic
    }
    menuentry "Ubuntu, with Linux 2.6.35-28-generic (on /dev/sda1)" --class gnu-linux --class gnu --class os {
        insmod part_msdos
        insmod ext2
        set root='(hd0,msdos1)'
        search --no-floppy --fs-uuid --set=root c4cabb0e-8279-4472-860b-c3d619524bd1
        linux /boot/vmlinuz-2.6.35-28-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro quiet splash $vt_handoff
        initrd /boot/initrd.img-2.6.35-28-generic
    }
    menuentry "Ubuntu, with Linux 2.6.35-28-generic (recovery mode) (on /dev/sda1)" --class gnu-linux --class gnu --class os {
        insmod part_msdos
        insmod ext2
        set root='(hd0,msdos1)'
        search --no-floppy --fs-uuid --set=root c4cabb0e-8279-4472-860b-c3d619524bd1
        linux /boot/vmlinuz-2.6.35-28-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro recovery nomodeset
        initrd /boot/initrd.img-2.6.35-28-generic
    }
    menuentry "Ubuntu, with Linux 2.6.32-30-generic (on /dev/sda1)" --class gnu-linux --class gnu --class os {
        insmod part_msdos
        insmod ext2
        set root='(hd0,msdos1)'
        search --no-floppy --fs-uuid --set=root c4cabb0e-8279-4472-860b-c3d619524bd1
        linux /boot/vmlinuz-2.6.32-30-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro quiet splash $vt_handoff
        initrd /boot/initrd.img-2.6.32-30-generic
    }
    menuentry "Ubuntu, with Linux 2.6.32-30-generic (recovery mode) (on /dev/sda1)" --class gnu-linux --class gnu --class os {
        insmod part_msdos
        insmod ext2
        set root='(hd0,msdos1)'
        search --no-floppy --fs-uuid --set=root c4cabb0e-8279-4472-860b-c3d619524bd1
        linux /boot/vmlinuz-2.6.32-30-generic root=UUID=c4cabb0e-8279-4472-860b-c3d619524bd1 ro recovery nomodeset
        initrd /boot/initrd.img-2.6.32-30-generic
    }
    menuentry "Ubuntu, with Linux 2.6.32-28-generic (on /dev/sda6)" --class gnu-linux --class gnu --class os {
        insmod part_msdos
        insmod ext2
        set root='(hd0,msdos6)'
        search --no-floppy --fs-uuid --set=root 4ba48cb5-dd06-484b-9ee2-09665d499f2f
        linux /boot/vmlinuz-2.6.32-28-generic root=UUID=4ba48cb5-dd06-484b-9ee2-09665d499f2f ro quiet splash
        initrd /boot/initrd.img-2.6.32-28-generic
    }
    menuentry "Ubuntu, with Linux 2.6.32-28-generic (recovery mode) (on /dev/sda6)" --class gnu-linux --class gnu --class os {
        insmod part_msdos
        insmod ext2
        set root='(hd0,msdos6)'
        search --no-floppy --fs-uuid --set=root 4ba48cb5-dd06-484b-9ee2-09665d499f2f
        linux /boot/vmlinuz-2.6.32-28-generic root=UUID=4ba48cb5-dd06-484b-9ee2-09665d499f2f ro single
        initrd /boot/initrd.img-2.6.32-28-generic
    }
    menuentry "Ubuntu, with Linux 2.6.32-28-generic (on /dev/sdc1)" --class gnu-linux --class gnu --class os {
        insmod part_msdos
        insmod ext2
        set root='(hd2,msdos1)'
        search --no-floppy --fs-uuid --set=root fa66fefd-ea62-4993-b761-abae20086aee
        linux /boot/vmlinuz-2.6.32-28-generic root=UUID=fa66fefd-ea62-4993-b761-abae20086aee ro quiet splash
        initrd /boot/initrd.img-2.6.32-28-generic
    }
    menuentry "Ubuntu, with Linux 2.6.32-28-generic (recovery mode) (on /dev/sdc1)" --class gnu-linux --class gnu --class os {
        insmod part_msdos
        insmod ext2
        set root='(hd2,msdos1)'
        search --no-floppy --fs-uuid --set=root fa66fefd-ea62-4993-b761-abae20086aee
        linux /boot/vmlinuz-2.6.32-28-generic root=UUID=fa66fefd-ea62-4993-b761-abae20086aee ro single
        initrd /boot/initrd.img-2.6.32-28-generic
    }
    ### END /etc/grub.d/30_os-prober ###
    
    ### BEGIN /etc/grub.d/40_custom ###
    # This file provides an easy way to add custom menu entries.  Simply type the
    # menu entries you want to add after this comment.  Be careful not to change
    # the 'exec tail' line above.
    ### END /etc/grub.d/40_custom ###
    
    ### BEGIN /etc/grub.d/41_custom ###
    if [ -f  $prefix/custom.cfg ]; then
      source $prefix/custom.cfg;
    fi
    ### END /etc/grub.d/41_custom ###
    --------------------------------------------------------------------------------
    
    =============================== sdc6/etc/fstab: ================================
    
    --------------------------------------------------------------------------------
    # /etc/fstab: static file system information.
    #
    # Use 'blkid' to print the universally unique identifier for a
    # device; this may be used with UUID= as a more robust way to name devices
    # that works even if disks are added and removed. See fstab(5).
    #
    # <file system> <mount point>   <type>  <options>       <dump>  <pass>
    proc            /proc           proc    nodev,noexec,nosuid 0       0
    # / was on /dev/sdc6 during installation
    UUID=cb2e8bda-3da7-48f4-af2a-c1bb5f948687 /               ext4    errors=remount-ro 0       1
    # swap was on /dev/sdc5 during installation
    UUID=d0514762-8937-42e3-9360-8639c3dc3d1b none            swap    sw              0       0
    /dev/fd0        /media/floppy0  auto    rw,user,noauto,exec,utf8 0       0
    --------------------------------------------------------------------------------
    
    =================== sdc6: Location of files loaded by Grub: ====================
    
               GiB - GB             File                                 Fragment(s)
    
                   =                boot/grub/core.img                             1
                   =                boot/grub/grub.cfg                             1
                   =                boot/initrd.img-3.2.0-23-generic               2
                   =                boot/vmlinuz-3.2.0-23-generic                  1
                   =                initrd.img                                     2
                   =                vmlinuz                                        1
    
    ======================== Unknown MBRs/Boot Sectors/etc: ========================
    
    Unknown BootLoader on sda2
    
    00000000  de 09 de fd 8b 3a 69 2a  a3 0f ff 74 00 00 00 00  |.....:i*...t....|
    00000010  00 2a 06 21 1c b6 7b 11  6e db d4 c5 d9 fa 86 5a  |.*.!..{.n......Z|
    00000020  1d 68 a0 a8 22 1e 7b 22  21 6a 26 40 b3 95 82 95  |.h..".{"!j&@....|
    00000030  bb 0c 72 9c 74 bf 65 25  57 69 e8 cc 9c d9 31 fa  |..r.t.e%Wi....1.|
    00000040  ac 51 67 45 ca ed 31 05  94 d2 52 65 30 1d 67 22  |.QgE..1...Re0.g"|
    00000050  9d e3 1d ad 32 e8 1c 75  40 72 e1 cf 86 72 ab 6e  |....2..u@r...r.n|
    00000060  9b e5 bc df 9a 2e 77 bc  b3 db 5b ee 79 ed 6d f5  |......w...[.y.m.|
    00000070  e5 e7 c3 7e 69 8c 3c 12  30 c8 bf 23 53 22 05 d7  |...~i.<.0..#S"..|
    00000080  c6 bd 0b 7e bf 98 ff fd  98 00 00 00 01 a5 54 18  |...~..........T.|
    00000090  1b 94 dd 1a 94 fc 0f 3d  0c be b1 ba 7a 8c 96 89  |.......=....z...|
    000000a0  28 7a 1a 07 18 44 4c 81  67 27 05 8c 53 76 a6 22  |(z...DL.g'..Sv."|
    000000b0  60 58 85 c8 50 2a 54 56  f1 5a a3 1a 4d d2 d3 09  |`X..P*TV.Z..M...|
    000000c0  8a 22 bf 60 7a 82 62 9c  a2 12 e3 8e 6e fa d0 e9  |.".`z.b.....n...|
    000000d0  69 55 6c d2 79 44 96 22  09 3c 22 0e 53 3b 35 4e  |iUl.yD.".<".S;5N|
    000000e0  fc 42 ee 77 55 de 6f d9  12 a7 d3 bd c7 76 6b 6f  |.B.wU.o......vko|
    000000f0  5f 1e 79 4d ac 5e c3 6f  3e 4c 3e 6d 0a 7b 90 1b  |_.yM.^.o>L>m.{..|
    00000100  3a 74 3d 68 c8 46 8f ef  a6 00 00 00 00 ff fa a0  |:t=h.F..........|
    00000110  04 2a 29 02 80 03 a4 48  d8 51 e9 1a f2 7b 8a cb  |.*)....H.Q...{..|
    00000120  1d 60 c3 6e 0f 78 fb 5c  c7 b1 2b 89 c9 20 2c 30  |.`.n.x.\..+.. ,0|
    00000130  f4 99 70 01 c1 dc 67 21  c5 dc e0 55 27 0f b3 4d  |..p...g!...U'..M|
    00000140  9a 0e 89 85 07 df 21 b1  50 a9 0b 8c 79 a7 2a bb  |......!.P...y.*.|
    00000150  8c e7 b5 04 2c 35 87 a2  85 96 74 99 02 97 25 23  |....,5....t...%#|
    00000160  f0 c5 9b 02 60 f8 7c 00  b0 20 41 03 38 61 01 c3  |....`.|.. A.8a..|
    00000170  61 54 10 2c dc 1f 5c e6  c8 e1 cc 20 c2 19 dd 9f  |aT.,..\.... ....|
    00000180  86 35 43 08 e8 6a 16 7f  95 44 2f ae 45 f5 33 ff  |.5C..j...D/.E.3.|
    00000190  11 5f b3 a9 44 ad df bb  0f 6f f5 5e 13 21 f3 ab  |._..D....o.^.!..|
    000001a0  e7 fd b8 91 80 00 00 00  00 13 a2 a0 21 1b 7c ec  |............!.|.|
    000001b0  c8 21 e8 12 44 91 ce 9d  7b 53 55 b8 b9 07 00 fe  |.!..D...{SU.....|
    000001c0  ff ff 82 fe ff ff 02 70  ab 29 00 40 b8 00 00 fe  |.......p.).@....|
    000001d0  ff ff 05 fe ff ff 01 00  00 00 01 80 f3 28 00 00  |.............(..|
    000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
    000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
    00000200
    
    Unknown BootLoader on sdc2
    
    00000000  3a 4a 24 22 16 1a 4a f9  48 40 2d 72 8b b3 64 46  |:J$"..J.H@-r..dF|
    00000010  55 5b 16 ac a8 32 53 b6  64 f2 9b 02 59 64 91 a1  |U[...2S.d...Yd..|
    00000020  18 9e 7f 39 6b 4d b1 b8  29 29 97 c9 b6 71 00 41  |...9kM..))...q.A|
    00000030  23 09 84 26 2b 23 92 b3  a0 ce ab 22 9c 11 09 35  |#..&+#....."...5|
    00000040  77 e4 99 44 88 4a 4e a9  bd f9 37 23 61 f1 5d 10  |w..D.JN...7#a.].|
    00000050  0c f5 fa 11 c1 16 a6 a3  5e 0a 78 6d 41 60 9d bb  |........^.xmA`..|
    00000060  64 8c c2 27 69 26 2b fb  94 dd 46 6f 1f 94 56 4c  |d..'i&+...Fo..VL|
    00000070  a5 ca ad 97 4b 52 d0 20  81 10 85 6c 80 31 64 28  |....KR. ...l.1d(|
    00000080  30 9c c9 04 32 b8 2c eb  c1 89 6e b7 e4 26 65 09  |0...2.,...n..&e.|
    00000090  f0 7e ca 43 13 a3 94 24  92 ca d6 24 05 e5 6b e4  |.~.C...$...$..k.|
    000000a0  db 9a ac b0 04 34 79 62  14 2a 10 44 62 58 7d 66  |.....4yb.*.DbX}f|
    000000b0  40 89 62 6f 48 46 9a 42  86 50 84 3c d1 0c 2e 7c  |@.boHF.B.P.<...||
    000000c0  8c fc 91 3c 09 08 c0 69  37 4c 27 46 69 28 12 c8  |...<...i7L'Fi(..|
    000000d0  5a ae 42 ec a2 6b c3 cb  68 21 85 49 3c c4 92 07  |Z.B..k..h!.I<...|
    000000e0  cb 13 c6 ed 6c e1 11 85  a3 a2 e5 93 64 72 59 09  |....l.......drY.|
    000000f0  f2 c4 b2 76 b1 24 2b 51  22 e7 cf 96 32 a0 89 32  |...v.$+Q"...2..2|
    00000100  b1 0c 0c 0f a1 20 d8 14  11 88 0c 5a 45 0a 3a 44  |..... .....ZE.:D|
    00000110  ea de 7f 51 79 c3 74 8b  23 eb e5 f3 fd 7f 5f 9c  |...Qy.t.#....._.|
    00000120  3c dc e5 1c 95 11 2f 7a  b2 5a dd 28 8c 4e 7d 09  |<...../z.Z.(.N}.|
    00000130  46 9e bb d5 de 3c cf d2  fa ce bf be 68 9d 32 1f  |F....<......h.2.|
    00000140  60 41 3a 23 28 74 15 33  4b c8 ba 4e c2 e3 7e 6e  |`A:#(t.3K..N..~n|
    00000150  75 e6 3a cc fd e4 ee ec  e9 d7 37 c5 3a 7d b4 71  |u.:.......7.:}.q|
    00000160  5d 54 89 1c 33 83 13 29  36 5f bd 48 f2 d0 a1 c2  |]T..3..)6_.H....|
    00000170  d5 e3 4f d6 cb 62 ac 9d  b0 b4 58 d9 59 53 9a a1  |..O..b....X.YS..|
    00000180  4f d8 ab a4 2d 4d 46 09  f9 19 9e 0b 1d 0c ad 47  |O...-MF........G|
    00000190  5d 9c ce fc 83 6e 59 2e  54 e6 9e 7e 6d 1f 27 85  |]....nY.T..~m.'.|
    000001a0  b3 d7 3a 16 ad eb ee 1e  fa f5 d5 1b f4 dd d5 f7  |..:.............|
    000001b0  3b c3 62 f8 f6 4c 7d de  b2 f4 db 7e 48 ae 00 fe  |;.b..L}....~H...|
    000001c0  ff ff 82 fe ff ff 02 30  1d 01 00 38 1a 00 00 fe  |.......0...8....|
    000001d0  ff ff 05 fe ff ff 01 00  00 00 01 30 1d 01 00 00  |...........0....|
    000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
    000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
    00000200
    
    
    =============================== StdErr Messages: ===============================
    
    xz: (stdin): Compressed data is corrupt
    xz: (stdin): Compressed data is corrupt
    awk: cmd. line:36: Math support is not compiled in
    awk: cmd. line:36: Math support is not compiled in
    awk: cmd. line:36: Math support is not compiled in
    awk: cmd. line:36: Math support is not compiled in
    awk: cmd. line:36: Math support is not compiled in
    awk: cmd. line:36: Math support is not compiled in
    awk: cmd. line:36: Math support is not compiled in
    awk: cmd. line:36: Math support is not compiled in
    awk: cmd. line:36: Math support is not compiled in
    awk: cmd. line:36: Math support is not compiled in
    awk: cmd. line:36: Math support is not compiled in
    awk: cmd. line:36: Math support is not compiled in
    awk: cmd. line:36: Math support is not compiled in
    awk: cmd. line:36: Math support is not compiled in
    awk: cmd. line:36: Math support is not compiled in
    awk: cmd. line:36: Math support is not compiled in
    awk: cmd. line:36: Math support is not compiled in
    awk: cmd. line:36: Math support is not compiled in
    awk: cmd. line:36: Math support is not compiled in
    awk: cmd. line:36: Math support is not compiled in
    xz: (stdin): Compressed data is corrupt
    awk: cmd. line:36: Math support is not compiled in
    awk: cmd. line:36: Math support is not compiled in
    awk: cmd. line:36: Math support is not compiled in
    awk: cmd. line:36: Math support is not compiled in
    awk: cmd. line:36: Math support is not compiled in
    awk: cmd. line:36: Math support is not compiled in
    awk: cmd. line:36: Math support is not compiled in
    awk: cmd. line:36: Math support is not compiled in
    awk: cmd. line:36: Math support is not compiled in
    awk: cmd. line:36: Math support is not compiled in
    awk: cmd. line:36: Math support is not compiled in
    awk: cmd. line:36: Math support is not compiled in

Page 1 of 2 12 LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •