Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 39

Thread: Ubuntu 12.04 beta2 issues with Ralink RT2800 PCI loses connection

  1. #11
    Join Date
    Jun 2008
    Beans
    8

    Re: Ubuntu 12.04 beta2 issues with Ralink RT2800 PCI loses connection

    Hello,

    I'm having similar issues with my Ralink card. I followed your instructions, but am getting the following error:

    Code:
    sudo insmod /etc/Wireless/RT2860STA/rt2860sta.ko
    insmod: error inserting '/etc/Wireless/RT2860STA/rt2860sta.ko': -1 Device or resource busy
    Can you please help and let me know how to proceed?

    Thanks in advance!

  2. #12
    Join Date
    Apr 2012
    Beans
    16

    Re: Ubuntu 12.04 beta2 issues with Ralink RT2800 PCI loses connection

    Quote Originally Posted by Bushi86 View Post
    Hello,

    I'm having similar issues with my Ralink card. I followed your instructions, but am getting the following error:

    Code:
    sudo insmod /etc/Wireless/RT2860STA/rt2860sta.ko
    insmod: error inserting '/etc/Wireless/RT2860STA/rt2860sta.ko': -1 Device or resource busy
    Can you please help and let me know how to proceed?

    Thanks in advance!
    Could you try to continue through the steps, more specifically continue on and finish the steps about blacklist and restart your system. See if that helps.

    If that doesn't work after restarting your system, could you list the output of
    Code:
    lsmod
    and
    Code:
    lspci

  3. #13
    Join Date
    Jun 2008
    Beans
    8

    Re: Ubuntu 12.04 beta2 issues with Ralink RT2800 PCI loses connection

    Quote Originally Posted by neilhuang View Post
    Could you try to continue through the steps, more specifically continue on and finish the steps about blacklist and restart your system. See if that helps.

    If that doesn't work after restarting your system, could you list the output of
    Code:
    lsmod
    I was able to continue with the steps, but it did not seem to help. lsmod shows several modules that I have blacklisted as still in use (even after a reboot). Here is the output:

    Code:
    $ lsmod
    Module                  Size  Used by
    ses                    17417  0 
    enclosure              15269  1 ses
    vesafb                 13844  1 
    snd_hda_codec_hdmi     32474  0 
    usb_storage            49198  1 
    bnep                   18281  2 
    rfcomm                 47604  0 
    bluetooth             180104  10 bnep,rfcomm
    parport_pc             32866  0 
    ppdev                  17113  0 
    arc4                   12529  2 
    snd_hda_codec_realtek   223867  1 
    rt2800pci              18715  0 
    rt2800lib              58925  1 rt2800pci
    crc_ccitt              12667  1 rt2800lib
    rt2x00pci              14577  1 rt2800pci
    rt2x00lib              55301  3 rt2800pci,rt2800lib,rt2x00pci
    mac80211              506816  3 rt2800lib,rt2x00pci,rt2x00lib
    snd_hda_intel          33773  3 
    snd_hda_codec         127706  3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel
    snd_hwdep              13668  1 snd_hda_codec
    snd_pcm                97188  3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
    cfg80211              205544  2 rt2x00lib,mac80211
    eeprom_93cx6           12725  1 rt2800pci
    snd_seq_midi           13324  0 
    snd_rawmidi            30748  1 snd_seq_midi
    snd_seq_midi_event     14899  1 snd_seq_midi
    snd_seq                61896  2 snd_seq_midi,snd_seq_midi_event
    snd_timer              29990  2 snd_pcm,snd_seq
    snd_seq_device         14540  3 snd_seq_midi,snd_rawmidi,snd_seq
    eeepc_wmi              13109  0 
    asus_wmi               24456  1 eeepc_wmi
    sparse_keymap          13890  1 asus_wmi
    fglrx                3263966  124 
    mxm_wmi                12979  0 
    sp5100_tco             13791  0 
    snd                    78855  16 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
    joydev                 17693  0 
    i2c_piix4              13301  0 
    fam15h_power           13032  0 
    mac_hid                13253  0 
    psmouse                87692  0 
    edac_core              53746  0 
    edac_mce_amd           23709  0 
    serio_raw              13211  0 
    k10temp                13166  0 
    soundcore              15091  1 snd
    snd_page_alloc         18529  2 snd_hda_intel,snd_pcm
    wmi                    19256  2 asus_wmi,mxm_wmi
    lp                     17799  0 
    parport                46562  3 parport_pc,ppdev,lp
    usbhid                 47199  0 
    hid                    99559  1 usbhid
    e1000e                156693  0
    Here is the output from lspci:
    Code:
    00:00.0 Host bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (external gfx0 port B) (rev 02)
    00:02.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (PCI express gpp port B)
    00:04.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (PCI express gpp port D)
    00:05.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (PCI express gpp port E)
    00:06.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (PCI express gpp port F)
    00:07.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (PCI express gpp port G)
    00:09.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (PCI express gpp port H)
    00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (rev 40)
    00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
    00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
    00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
    00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
    00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 42)
    00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) (rev 40)
    00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
    00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge (rev 40)
    00:14.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
    00:16.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
    00:16.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
    00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 15h Processor Function 0
    00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 15h Processor Function 1
    00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 15h Processor Function 2
    00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 15h Processor Function 3
    00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 15h Processor Function 4
    00:18.5 Host bridge: Advanced Micro Devices [AMD] Family 15h Processor Function 5
    01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Device 683d
    01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Device aab0
    02:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 01)
    03:00.0 Ethernet controller: Intel Corporation 82583V Gigabit Network Connection
    04:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller
    05:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller
    06:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller
    07:05.0 Network controller: Ralink corp. RT2800 802.11n PCI
    Last edited by Bushi86; May 9th, 2012 at 01:34 AM. Reason: Added Output of lspci

  4. #14
    Join Date
    Apr 2012
    Beans
    16

    Re: Ubuntu 12.04 beta2 issues with Ralink RT2800 PCI loses connection

    Quote Originally Posted by Bushi86 View Post

    Code:
    $ lsmod
    Module                  Size  Used by
    ses                    17417  0 
    enclosure              15269  1 ses
    vesafb                 13844  1 
    snd_hda_codec_hdmi     32474  0 
    usb_storage            49198  1 
    bnep                   18281  2 
    rfcomm                 47604  0 
    bluetooth             180104  10 bnep,rfcomm
    parport_pc             32866  0 
    ppdev                  17113  0 
    arc4                   12529  2 
    snd_hda_codec_realtek   223867  1 
    rt2800pci              18715  0 
    rt2800lib              58925  1 rt2800pci
    crc_ccitt              12667  1 rt2800lib
    rt2x00pci              14577  1 rt2800pci
    rt2x00lib              55301  3 rt2800pci,rt2800lib,rt2x00pci
    mac80211              506816  3 rt2800lib,rt2x00pci,rt2x00lib
    snd_hda_intel          33773  3 
    snd_hda_codec         127706  3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel
    snd_hwdep              13668  1 snd_hda_codec
    snd_pcm                97188  3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
    cfg80211              205544  2 rt2x00lib,mac80211
    eeprom_93cx6           12725  1 rt2800pci
    snd_seq_midi           13324  0 
    snd_rawmidi            30748  1 snd_seq_midi
    snd_seq_midi_event     14899  1 snd_seq_midi
    snd_seq                61896  2 snd_seq_midi,snd_seq_midi_event
    snd_timer              29990  2 snd_pcm,snd_seq
    snd_seq_device         14540  3 snd_seq_midi,snd_rawmidi,snd_seq
    eeepc_wmi              13109  0 
    asus_wmi               24456  1 eeepc_wmi
    sparse_keymap          13890  1 asus_wmi
    fglrx                3263966  124 
    mxm_wmi                12979  0 
    sp5100_tco             13791  0 
    snd                    78855  16 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
    joydev                 17693  0 
    i2c_piix4              13301  0 
    fam15h_power           13032  0 
    mac_hid                13253  0 
    psmouse                87692  0 
    edac_core              53746  0 
    edac_mce_amd           23709  0 
    serio_raw              13211  0 
    k10temp                13166  0 
    soundcore              15091  1 snd
    snd_page_alloc         18529  2 snd_hda_intel,snd_pcm
    wmi                    19256  2 asus_wmi,mxm_wmi
    lp                     17799  0 
    parport                46562  3 parport_pc,ppdev,lp
    usbhid                 47199  0 
    hid                    99559  1 usbhid
    e1000e                156693  0
    I'm curious as to why you have
    Code:
    rt2800pci              18715  0 
    rt2800lib              58925  1 rt2800pci
    crc_ccitt              12667  1 rt2800lib
    rt2x00pci              14577  1 rt2800pci
    rt2x00lib              55301  3 rt2800pci,rt2800lib,rt2x00pci
    mac80211              506816  3 rt2800lib,rt2x00pci,rt2x00lib
    so many modules using all these drivers. I suspect that this causes the drivers conflict.

    You can try to do a modinfo on the modules (left column) to find more information.

    Try this to see if it helps... I'm not exactly sure why at the moment.

  5. #15
    Join Date
    May 2012
    Beans
    1

    Re: Ubuntu 12.04 beta2 issues with Ralink RT2800 PCI loses connection

    Thanks, all the steps in post #9 generally worked, but there were a couple of quirks that may be useful for others to know.

    My hardware is a HP probook 4730s, which lspci reports as having a ralink 3592 card. I went to ralink website at the link above to get correct drivers for me, which is where things are not quite as straightforward as they could be. After digging a bit for one OK for 3592, and following the steps outlined above, I ended up building and linking to a 3562 driver, which was how it was denoted within the archive, which was a bit confusing.

    The readme included in the archive was also a bit iffy, suggesting commands that can not be done as the directories referred to don't exist. neilhuang's instructions are better.

    I did have to do sudo make, not just make. Then just take care with the directories and filenames in the later steps so they correct for your setup.

    Works great now. Ta Muchly.
    Last edited by mgf; May 9th, 2012 at 10:04 AM. Reason: typo

  6. #16
    Join Date
    Jun 2008
    Beans
    8

    Thumbs down Re: Ubuntu 12.04 beta2 issues with Ralink RT2800 PCI loses connection

    Quote Originally Posted by neilhuang View Post
    I'm curious as to why you have
    Code:
    rt2800pci              18715  0 
    rt2800lib              58925  1 rt2800pci
    crc_ccitt              12667  1 rt2800lib
    rt2x00pci              14577  1 rt2800pci
    rt2x00lib              55301  3 rt2800pci,rt2800lib,rt2x00pci
    mac80211              506816  3 rt2800lib,rt2x00pci,rt2x00lib
    so many modules using all these drivers. I suspect that this causes the drivers conflict.

    You can try to do a modinfo on the modules (left column) to find more information.

    Try this to see if it helps... I'm not exactly sure why at the moment.
    So I was able to remove all of them and then insmod the rt2860sta.ko, but the connection is still not working (connected to network, but no Internet). rt2860 is the only module showing up:
    Code:
    $ lsmod | grep rt2
    rt2860sta             864748  0
    BTW, I had to reinstall Ubuntu yesterday, so I repeated everything on a fresh OS and am still getting the same results. However, I did notice one difference. Whenever I downloaded the drivers from Ralink site, they were corrupted and wouldn't extract. So I've been using the drivers from Rosewill (my wifi card manufacturer) this whole time. They are the exact same tar as far as I could tell, except that all of the changes needed in the Makefile were already there.

    Would it be possible for anyone to share the Ralink drivers, or at least their Makefile? Thanks!

  7. #17
    Join Date
    Apr 2006
    Beans
    8

    Re: Ubuntu 12.04 beta2 issues with Ralink RT2800 PCI loses connection

    I'm experiencing the same problems as the OP. My card was working perfectly under 11.10, but after upgrading to 12.04 my wifi will start cutting out every 10 to 15 minutes. I switched to the RAlink drivers (rt2860sta) but am still experiencing the same issues.

    My card is a Rosewill RNX-N300X

    Here's the ouput of 'lspci -k|grep -i network --after-context 3'

    Code:
    03:05.0 Network controller: Ralink corp. RT2800 802.11n PCI
    	Subsystem: Ralink corp. Device 2860
    	Kernel driver in use: rt2860
    	Kernel modules: rt2860sta, rt2800pci
    Here's the end of my dmesg after it cuts out.

    Code:
    [13564.593665] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
    [13564.593707] ERROR!!! RTMPSetTimer failed, Halt in Progress!
    [13564.601494] RX DESC ffff8800c7813000  size = 2048
    [13564.605401] Key1Str is Invalid key length(0) or Type(0)
    [13564.605410] Key2Str is Invalid key length(0) or Type(0)
    [13564.605418] Key3Str is Invalid key length(0) or Type(0)
    [13564.605426] Key4Str is Invalid key length(0) or Type(0)
    [13564.605546] 1. Phy Mode = 5
    [13564.605547] 2. Phy Mode = 5
    [13564.621514] phy mode> Error! The chip does not support 5G band 1!
    [13564.621568] RTMPSetPhyMode: channel is out of range, use first channel=1 
    [13564.629780] 3. Phy Mode = 9
    [13564.634395] MCS Set = ff ff 00 00 01
    [13564.634397] <==== rt28xx_init, Status=0
    [13564.634464] 0x1300 = 000a4300
    [13564.643464] /home/chris/src/2010_07_16_RT2860_Linux_STA_v2.4.0.0/os/linux/../../common/cmm_asic.c:3387 assert KeyIdx < 4failed
    [13564.643474] /home/chris/src/2010_07_16_RT2860_Linux_STA_v2.4.0.0/os/linux/../../common/cmm_asic.c:3387 assert KeyIdx < 4failed
    [13564.644152] /home/chris/src/2010_07_16_RT2860_Linux_STA_v2.4.0.0/os/linux/../../common/cmm_asic.c:3387 assert KeyIdx < 4failed
    [13564.644161] /home/chris/src/2010_07_16_RT2860_Linux_STA_v2.4.0.0/os/linux/../../common/cmm_asic.c:3387 assert KeyIdx < 4failed
    [13564.645825] /home/chris/src/2010_07_16_RT2860_Linux_STA_v2.4.0.0/os/linux/../../common/cmm_asic.c:3387 assert KeyIdx < 4failed
    [13564.645834] /home/chris/src/2010_07_16_RT2860_Linux_STA_v2.4.0.0/os/linux/../../common/cmm_asic.c:3387 assert KeyIdx < 4failed
    [13566.629713] ===>rt_ioctl_giwscan. 12(12) BSS returned, data->length = 2288
    [13566.629948] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
    [13566.851945] Rcv Wcid(1) AddBAReq
    [13566.851949] Start Seq = 00000000
    [13577.600013] ra0: no IPv6 routers present
    [13592.857209] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
    [13592.857245] ERROR!!! RTMPSetTimer failed, Halt in Progress!
    [13592.864828] RX DESC ffff8800c7813000  size = 2048
    [13592.868724] Key1Str is Invalid key length(0) or Type(0)
    [13592.868732] Key2Str is Invalid key length(0) or Type(0)
    [13592.868740] Key3Str is Invalid key length(0) or Type(0)
    [13592.868748] Key4Str is Invalid key length(0) or Type(0)
    [13592.868868] 1. Phy Mode = 5
    [13592.868869] 2. Phy Mode = 5
    [13592.884854] phy mode> Error! The chip does not support 5G band 1!
    [13592.884905] RTMPSetPhyMode: channel is out of range, use first channel=1 
    [13592.893123] 3. Phy Mode = 9
    [13592.897631] MCS Set = ff ff 00 00 01
    [13592.897633] <==== rt28xx_init, Status=0
    [13592.897700] 0x1300 = 000a4300
    [13592.903676] /home/chris/src/2010_07_16_RT2860_Linux_STA_v2.4.0.0/os/linux/../../common/cmm_asic.c:3387 assert KeyIdx < 4failed
    [13592.903685] /home/chris/src/2010_07_16_RT2860_Linux_STA_v2.4.0.0/os/linux/../../common/cmm_asic.c:3387 assert KeyIdx < 4failed
    [13592.904383] /home/chris/src/2010_07_16_RT2860_Linux_STA_v2.4.0.0/os/linux/../../common/cmm_asic.c:3387 assert KeyIdx < 4failed
    [13592.904394] /home/chris/src/2010_07_16_RT2860_Linux_STA_v2.4.0.0/os/linux/../../common/cmm_asic.c:3387 assert KeyIdx < 4failed
    [13594.861697] ===>rt_ioctl_giwscan. 14(14) BSS returned, data->length = 2782
    [13594.861876] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
    [13595.114614] /home/chris/src/2010_07_16_RT2860_Linux_STA_v2.4.0.0/os/linux/../../common/cmm_asic.c:3387 assert KeyIdx < 4failed
    [13595.114624] /home/chris/src/2010_07_16_RT2860_Linux_STA_v2.4.0.0/os/linux/../../common/cmm_asic.c:3387 assert KeyIdx < 4failed
    [13595.115393] /home/chris/src/2010_07_16_RT2860_Linux_STA_v2.4.0.0/os/linux/../../common/cmm_asic.c:3387 assert KeyIdx < 4failed
    [13595.115402] /home/chris/src/2010_07_16_RT2860_Linux_STA_v2.4.0.0/os/linux/../../common/cmm_asic.c:3387 assert KeyIdx < 4failed
    [13597.177692] ===>rt_ioctl_giwscan. 16(16) BSS returned, data->length = 3135
    [13597.178074] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
    [13597.368767] Rcv Wcid(1) AddBAReq
    [13597.368771] Start Seq = 00000000
    [13601.881130] Rcv Wcid(1) AddBAReq
    [13601.881133] Start Seq = 00000002
    [13605.392015] ra0: no IPv6 routers present
    [13638.310715] ===>rt_ioctl_giwscan. 16(16) BSS returned, data->length = 3191
    [13698.418728] ===>rt_ioctl_giwscan. 15(15) BSS returned, data->length = 2935
    [13778.546744] ===>rt_ioctl_giwscan. 16(16) BSS returned, data->length = 3229
    [13878.694746] ===>rt_ioctl_giwscan. 14(14) BSS returned, data->length = 2630
    [13898.726607] ACT - Update2040CoexistFrameAndNotify. BSSCoexist2040 = 1. EventANo = 3. 
    [13898.726611] ACT - BuildIntolerantChannelRep , Total Channel number = 1 
    [13898.726613] ACT - BuildIntolerantChannelRep , Total Channel number = 2 
    [13898.726614] ACT - BuildIntolerantChannelRep , Total Channel number = 3 
    [13898.726615] ACT-BuildIntolerantChannelRep(Size=6)
    [13898.726708] ===>rt_ioctl_giwscan. 17(17) BSS returned, data->length = 3362
    Any suggestions?

  8. #18
    Join Date
    Jun 2008
    Beans
    8

    Re: Ubuntu 12.04 beta2 issues with Ralink RT2800 PCI loses connection

    Quote Originally Posted by mathfreak View Post
    My card is a Rosewill RNX-N300X
    I've got the exact same card and the exact same issues! Not sure if I'm getting the same/similar errors in dmesg, but I can check when I get home.

    I've been trying to fix this all week, but I can't seem to get it.

  9. #19
    Join Date
    Nov 2011
    Beans
    3

    Angry Re: Ubuntu 12.04 beta2 issues with Ralink RT2800 PCI loses connection

    I did everything stated and this is my output of

    steven@UbuntuDesktop:/etc/Wireless/RT2860STA$ lsmod | grep rt
    rt2860sta 864748 0
    parport_pc 32866 0
    parport 46562 3 parport_pc,ppdev,lp

    did I do something wrong?

  10. #20
    Join Date
    Apr 2006
    Beans
    8

    Re: Ubuntu 12.04 beta2 issues with Ralink RT2800 PCI loses connection

    Quote Originally Posted by Bushi86 View Post
    I've got the exact same card and the exact same issues! Not sure if I'm getting the same/similar errors in dmesg, but I can check when I get home.

    I've been trying to fix this all week, but I can't seem to get it.
    I switched over to ndiswrapper and everything seems to be pretty stable so far. If you're curious, I basically followed the instructions here. The only real change I did was to create a file /etc/modprobe.d/blacklist-wlan.conf that contains the lines

    Code:
    blacklist rt2800pci
    blacklist rt2860sta
    Then when I rebooted it worked. It's been stable so far with no cutting out. I'll see how it continues.

Page 2 of 4 FirstFirst 1234 LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •