Aha, happy smileys instead of codes
Please always use 'Code' box to post commands & terminal outputs. It preserves its formatting and makes your post cleaner, compact and more readable. Follow the "Using Code Tags" link in my signature to see how. You should edit your above post afterwards to wrap the ouputs within code tags.
Onto the problem -
Originally Posted by
dosodavis
Bus 001 Device 003: ID 050d:110a Belkin Components
Even though you have a different card, your device is indeed supported by the same driver "rtl8192du" and the recommended procedure to install it was the same post that you were originally following.
So not sure if it was a connection fault or possibly a command error on your part. Can you open this site : https://github.com/lwfinger/rtl8192du ?
If yes, there should be no issues in cloning it. Please make sure your internet connection is working and you can open the above page. Then do (a shameless copy-paste from Dr. Chilli's post) -
Code:
sudo apt-get install build-essential linux-headers-generic git
git clone https://github.com/lwfinger/rtl8192du.git
cd rtl8192du
make
sudo make install
sudo modprobe 8192du
If there are any errors again, try downloading the driver as a zip file (https://github.com/lwfinger/rtl8192d...ive/master.zip) and post back for further steps.
Bookmarks