Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 21

Thread: using oringal xbox controler

  1. #11
    Join Date
    Apr 2008
    Beans
    35
    Distro
    Ubuntu 9.04 Jaunty Jackalope

    Re: using oringal xbox controler

    I'm using something like this to connect the controller
    http://ecx.images-amazon.com/images/...500_AA300_.jpg

  2. #12
    Join Date
    Jul 2009
    Location
    Iowa
    Beans
    229
    Distro
    Ubuntu 14.04 Trusty Tahr

    Re: using oringal xbox controler

    ok new plan. unplug the adaptor and controller from your pc. wait about 20 seconds, then plug both back in. In terminal run
    Code:
    dmesg |tail
    post the output.

  3. #13
    Join Date
    Apr 2008
    Beans
    35
    Distro
    Ubuntu 9.04 Jaunty Jackalope

    Re: using oringal xbox controler

    [ 30.864676] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
    [ 31.220579] init: plymouth-stop pre-start process (1345) terminated with status 1
    [ 32.607317] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
    [ 36.928028] eth0: no IPv6 routers present
    [ 6829.588020] usb 4-2: new full speed USB device number 2 using uhci_hcd
    [ 6829.739113] hub 4-2:1.0: USB hub found
    [ 6829.741836] hub 4-2:1.0: 3 ports detected
    [ 6830.021931] usb 4-2.1: new full speed USB device number 3 using uhci_hcd
    [ 6830.281186] input: Chinese-made Xbox Controller as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2.1/4-2.1:1.0/input/input4
    [ 6830.281676] usbcore: registered new interface driver xpad

  4. #14
    Join Date
    Apr 2008
    Beans
    35
    Distro
    Ubuntu 9.04 Jaunty Jackalope

    Re: using oringal xbox controler

    sorry for being a week late

  5. #15
    Join Date
    Apr 2008
    Beans
    35
    Distro
    Ubuntu 9.04 Jaunty Jackalope

    Re: using oringal xbox controler

    a bump a day

  6. #16
    Join Date
    Apr 2008
    Beans
    35
    Distro
    Ubuntu 9.04 Jaunty Jackalope

    Re: using oringal xbox controler

    bump

  7. #17
    Join Date
    Apr 2008
    Beans
    35
    Distro
    Ubuntu 9.04 Jaunty Jackalope

    Re: using oringal xbox controler

    bump

  8. #18
    Join Date
    Jul 2009
    Location
    Iowa
    Beans
    229
    Distro
    Ubuntu 14.04 Trusty Tahr

    Re: using oringal xbox controler

    from that output it looks as if its getting recognized. I'll do some fishing around and see. have a look here and see if any of it helps.http://ubuntuforums.org/showthread.php?t=338457
    Last edited by lrgmmc; April 3rd, 2012 at 12:21 AM.

  9. #19
    Join Date
    Apr 2008
    Beans
    35
    Distro
    Ubuntu 9.04 Jaunty Jackalope

    Re: using oringal xbox controler

    thanks

  10. #20
    Join Date
    Apr 2005
    Location
    Belfast, Northern Ireland
    Beans
    10
    Distro
    Ubuntu 10.04 Lucid Lynx

    Re: using oringal xbox controler

    I have the same issue here. Was any resolution found?

    Dmesg shows the following. I have the same adaptor as the OP so I'm thinking it's just a naff bit of hardware. Perhaps wired-up badly.


    Code:
    [ 2505.012032] usb 2-1: new full-speed USB device number 28 using uhci_hcd
    [ 2505.160076] usb 2-1: New USB device found, idVendor=ffff, idProduct=ffff
    [ 2505.160083] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [ 2505.163146] hub 2-1:1.0: USB hub found
    [ 2505.165065] hub 2-1:1.0: 3 ports detected
    [ 2505.445082] usb 2-1.1: new full-speed USB device number 29 using uhci_hcd
    [ 2505.551089] usb 2-1.1: New USB device found, idVendor=ffff, idProduct=ffff
    [ 2505.551096] usb 2-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [ 2505.554233] input: Chinese-made Xbox Controller as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input24
    [ 2511.446293] usb 2-1.1: USB disconnect, device number 29
    [ 2511.568046] usb 2-1: reset full-speed USB device number 28 using uhci_hcd
    [ 2511.688040] usb 2-1: device descriptor read/64, error -71
    [ 2511.912116] usb 2-1: device descriptor read/64, error -71
    [ 2512.128037] usb 2-1: reset full-speed USB device number 28 using uhci_hcd
    [ 2512.248040] usb 2-1: device descriptor read/64, error -71
    [ 2512.472028] usb 2-1: device descriptor read/64, error -71
    [ 2512.688032] usb 2-1: reset full-speed USB device number 28 using uhci_hcd
    [ 2513.096020] usb 2-1: device not accepting address 28, error -71
    [ 2513.208044] usb 2-1: reset full-speed USB device number 28 using uhci_hcd
    [ 2513.616024] usb 2-1: device not accepting address 28, error -71
    [ 2513.720024] hub 2-1:1.0: hub_port_status failed (err = -19)
    [ 2513.720033] hub 2-1:1.0: hub_port_status failed (err = -19)
    [ 2513.720037] hub 2-1:1.0: hub_port_status failed (err = -19)
    [ 2513.720041] hub 2-1:1.0: activate --> -19
    [ 2513.720064] usb 2-1: USB disconnect, device number 28
    [ 2513.960043] usb 2-1: new full-speed USB device number 30 using uhci_hcd
    [ 2514.080037] usb 2-1: device descriptor read/64, error -71
    [ 2514.304034] usb 2-1: device descriptor read/64, error -71
    [ 2514.520037] usb 2-1: new full-speed USB device number 31 using uhci_hcd
    [ 2514.640028] usb 2-1: device descriptor read/64, error -71
    [ 2514.864041] usb 2-1: device descriptor read/64, error -71
    [ 2515.080046] usb 2-1: new full-speed USB device number 32 using uhci_hcd
    [ 2515.488033] usb 2-1: device not accepting address 32, error -71
    [ 2515.600035] usb 2-1: new full-speed USB device number 33 using uhci_hcd
    [ 2516.009462] usb 2-1: device not accepting address 33, error -75
    [ 2516.009492] hub 2-0:1.0: unable to enumerate USB device on port 1

Page 2 of 3 FirstFirst 123 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •