Page 51 of 120 FirstFirst ... 41495051525361101 ... LastLast
Results 501 to 510 of 1196

Thread: Moblock (peerguardian linux alternative)

  1. #501
    Join Date
    Nov 2005
    Location
    Scandinavia
    Beans
    937

    Re: Moblock (peerguardian linux alternative)

    Yes.
    - "though It seems that I know that I know, what I would like to see Is the I that sees me, when I know that I know that I know" / Alan Watts

  2. #502
    Join Date
    Nov 2006
    Beans
    2

    Smile Re: Moblock (peerguardian linux alternative)

    Hi pelle.k
    I have just installed MoBlock on my feisty. Just wanted to say that it works really well on my Toshiba laptop, nice and smooth. I have checked if it works, as following:

    guille@maschine:~$ tail /var/log/moblock.log
    Blocked OUT: British Broadcasting Corporation,hits: 3,DST: 132.185.8.88
    Blocked IN: Beijing Television Station China,hits: 1,SRC: 202.108.108.251
    Blocked OUT: United Nations Development Programme,hits: 4,DST: 140.191.12.88
    Blocked OUT: Bogon,hits: 8,DST: 42.34.13.88
    Blocked OUT: DoD Network Information Center,hits: 4,DST: 215.248.37.83
    Blocked OUT: Bogon,hits: 32,DST: 103.134.124.84
    Blocked OUT: Bogon,hits: 4,DST: 196.55.5.88
    Blocked OUT: British Broadcasting Corporation,hits: 4,DST: 132.185.8.88
    Blocked OUT: p2p abusers,hits: 2,DST: 202.98.116.66
    Blocked IN: SONY Corporation,hits: 1,SRC: 202.94.128.92

    So, that means it works & blocks quite well.
    I am just looking forward fot that marvellous python GUI I read at the beginning of the thread.
    Please let us know! God bless an application as MoBlock!

  3. #503
    Join Date
    Nov 2005
    Beans
    522
    Distro
    Ubuntu 10.04 Lucid Lynx

    Re: Moblock (peerguardian linux alternative)

    Hi. I am getting an authentication error when trying to install;

    Code:
    WARNING: The following packages cannot be authenticated!
      moblock-nfq
    Install these packages without verification [y/N]? n
    E: Some packages could not be authenticated
    I have run the commands in the first post for importing the key. Any pointers?

  4. #504
    Join Date
    May 2007
    Beans
    3

    Re: Moblock (peerguardian linux alternative)

    hey there, i'm new to linux, and while i'm starting to get the hang of how things work around here, it's slow going in most regards. i've been trying to get moblock up and running for several days now, i've spent hours reading throught the last 51 pages of post trying the various methods described herein to no avail. i'm using edgy on a 32bit amd. moblock is installed , i get a pid, it starts and stops, but i don't think anything is being blocked. here's why:

    a random address from guarding.p2p

    Code:
    fred@basement:~$ ping -c1 203.108.241.176
    PING 203.108.241.176 (203.108.241.176) 56(84) bytes of data.
    
    --- 203.108.241.176 ping statistics ---
    1 packets transmitted, 0 received, 100% packet loss, time 0ms
    
    fred@basement:~$
    which results in the log

    Code:
    fred@basement:~$ tail /var/log/moblock.log 
    Ranges loaded: 179221
    Merged ranges: 0
    Skipped useless ranges: 0
    NFQUEUE: binding to queue '0'
    error during nfq_create_queue()
    Ranges loaded: 179221
    Merged ranges: 0
    Skipped useless ranges: 0
    NFQUEUE: binding to queue '0'
    error during nfq_create_queue()
    fred@basement:~$
    and while i've manually downloaded the guarding.p2p file, i can't seem to ever connect to bluetack.co.uk for the other lists.

    my concern is that the log file never shows anything being blocked. along with the 'error during nfq_create_queue' bit. any help is always appreciated, thanks.

  5. #505
    Join Date
    Jan 2007
    Beans
    770

    Re: Moblock (peerguardian linux alternative)

    @techstop: don´t worry, verification of moblock-deb.sourceforge.net is broken here, too. Don´t know what´s wrong, but you still get the correct packages.

    @worntread:Your blocklist should be ok with 179221 loaded ranges. I don´t know why you can´t connect to bluetack.co.uk; normally if there are problems then only with the level1.gz list (which is the biggest list)

    moblock is not working because of the "error during nfq_create_queue()". Perhaps your problem is that moblock was started several times, so just try `/etc/init.d/moblock-nfq stop` as root a few times and then start moblock again (or reboot).

    If this doesn´t help then:
    Did you install the netfilter-debs from the first post!?
    You could still try moblock-ipq instead of moblock-nfq

  6. #506
    Join Date
    May 2007
    Beans
    3

    Re: Moblock (peerguardian linux alternative)

    i've started from scratch on this one. i uninstalled moblock and the libs, then reinstalled using the debs in the first post (just to make sure i was on the right versions).

    ...and everything worked out fine. i'm still not sure what the problem was, but i'll assume user error and be happy. actually, i think i was using the wrongs debs to start and just snowballed from there.

    thanks for the help.

  7. #507
    Join Date
    Apr 2006
    Location
    England
    Beans
    37
    Distro
    Edgy Eft Testing

    Re: Moblock (peerguardian linux alternative)

    I have just installed the 64-bit version of moblock and followed the guide in the first post and it appears to be running ok (logs show it is blocking things at least).
    I have one question though.

    I have a really crap router and the firewall settings in it are very ropey and because I have to reset it to factory settings once a day to get proper access, I don't bother with the firewall rules at all, meaning everything is blocked.
    So that being the case, is something like moblock still useful?

  8. #508
    Join Date
    Feb 2007
    Beans
    48

    Re: Moblock (peerguardian linux alternative)

    ?yo does anyone know how to open up specific ports so that they aren't blocked at all? I can't figure it out and I'm sure it is something simple, but it is driving me nuts haha

  9. #509
    Join Date
    Oct 2006
    Location
    Australia
    Beans
    68
    Distro
    Ubuntu 14.04 Trusty Tahr

    Re: Moblock (peerguardian linux alternative)

    Quote Originally Posted by chronniff View Post
    ?yo does anyone know how to open up specific ports so that they aren't blocked at all? I can't figure it out and I'm sure it is something simple, but it is driving me nuts haha
    sure is... search this thread for "whitelist" (hint: /etc/moblock/MoBlock-nfq.sh)
    mouse? I don't need no stinking mouse!

  10. #510
    Join Date
    Jan 2007
    Beans
    770

    Re: Moblock (peerguardian linux alternative)

    @shame: a "normal" firewall and moblock have different purposes. If you want to block the IPs in moblock´s blocklist then moblock is usefull for you (this is all moblock is for, nothing more, nothing less). Go to www.bluetack.co.uk to see of what kind these IPs are.
    On the other side your routers firewall will give you protection against unwanted connections/attacks not related to specific IPs.
    Last edited by jre; May 19th, 2007 at 10:37 AM.

Page 51 of 120 FirstFirst ... 41495051525361101 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •