ATI Radeon HD 4650
I'm having a problem. I have a 1GB ATI Radeon HD 4650 in my laptop. After installing the proprietary driver for this VGA Card, the laptop only recognizes 256 MB of the VGA. How can I make use of my entire 1GB?
Below is the result of the command " lspci -v | less"
02:00.0 VGA compatible controller: ATI Technologies Inc M96 [Mobility Radeon HD 4650] (prog-if 00 [VGA controller])
Subsystem: Dell Device 0456
Flags: bus master, fast devsel, latency 0, IRQ 45
Memory at d0000000 (32-bit, prefetchable) [size=256M]
I/O ports at 2000 [size=256]
Memory at cfef0000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at cfe00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: fglrx_pci
Kernel modules: fglrx, radeon
Re: ATI Radeon HD 4650
Good question here are a couple of website that you can read about.
Basically that command doesn't represent what your GPU is actually using. This seems to be the case when using the manufactures software.
"Excellent" -- mrburns
Tags for this Thread