Instructions how to set-up samsung CLX-3185FW
After executing instructions I have successfully installed CLX-3185FW over the network. It prints and scans over the network.
I have made it on Ubuntu 11.10, 32bit;
Before installing you MUST REMOVE any other previously installed drivers for Samsung.
Originally taken from:
http://www.bchemnet.com/suldr/index.html
Step 1 (edit sources):
sudo gedit /etc/apt/sources.list
Add lines:
#samsung drivers
deb
http://www.bchemnet.com/suldr/ debian extra
Step 2 (install authentication key) :
wget -O -
http://www.bchemnet.com/suldr/suldr.gpg | sudo apt-key add -
Step 3 (update sources):
sudo apt-get update
Step 4 (install packages):
Open ubuntu software center and install one by one all packaged that start with " samsungmfp-", excepting:
- first install packages which do not have the word "legacy";
- do not install packages which offer you to remove any other packages;
- Do not install "samsungmfp-parallel" it should only be installed if your printer is actually connected via a parallel port;
Step 5a (check if you are in lp group):
Run in Terminal:
cat /etc/group | grep lp
If your accaunt name is next to lp, everything is ok, else add yourself to lp group, how to do it is explained here:
Step 5b (add yourself into lp group if needed)
sudo usermod -a -G lp USERNAME
( more information about groups:
http://www.liberiangeek.net/2011/10/...iric-ocelot-2/)
That's it! Now you can search for your printer in network and add it as clx-3180 series and it will work.
P.S. Previously I have made some changes to some files. But I do not know if it has any impact.
If you have executed the five step above and still no luck, try making those changes:
/etc/sane.d/xerox_mfp.conf
lines added:
#Samsung CLX-3170fn & CLX-3175FW
usb 0x04e8 0x342a
/etc/sane.d/xerox_mfp.conf
lines added:
#Samsung CLX-3185FW
usb 0x04e8 0x343d
/lib/udev/rules.d/40-libsane.rules
lines added:
# Samsung CLX-3185FW
ATTRS{idVendor}=="04e8", ATTRS{idProduct}=="343d", ENV{libsane_matched}="yes"
Bookmarks