Code:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.0-12-generic (buildd@vernadsky) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #20-Ubuntu SMP Fri Oct 7 14:50:42 UTC 2011 (Ubuntu 3.0.0-12.20-generic 3.0.4)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001ff70000 (usable)
[ 0.000000] BIOS-e820: 000000001ff70000 - 000000001ff7f000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001ff7f000 - 000000001ff80000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled in hardware: non-PAE kernel!
[ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
[ 0.000000] DMI present.
[ 0.000000] DMI: Hewlett-Packard Presario R3200 (PF153UA#ABA) /08A0, BIOS F.11 04/30/2004
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x1ff70 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-D3FFF write-back
[ 0.000000] D4000-D4FFF write-protect
[ 0.000000] D5000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFE0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-000000001ff70000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 001fc00000 page 2M
[ 0.000000] 001fc00000 - 001ff70000 page 4k
[ 0.000000] kernel direct mapping tables up to 1ff70000 @ 1bfb000-1c00000
[ 0.000000] RAMDISK: 1dcb2000 - 1e9b0000
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1ff70000
[ 0.000000] low ram: 0 - 1ff70000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0001ff70
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0001ff70
[ 0.000000] On node 0 totalpages: 130815
[ 0.000000] free_area_init_node: node 0, pgdat c17b11c0, node_mem_map dfb6f200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 991 pages used for memmap
[ 0.000000] Normal zone: 125841 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Found and enabled local APIC!
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
[ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:dff80000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @df400000 s26240 r0 d22912 u4194304
[ 0.000000] pcpu-alloc: s26240 r0 d22912 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129792
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-12-generic root=UUID=b61c59af-7f66-4df5-b2d5-928314a8ddd3 ro acpi=off
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 2094592 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 493808k/523712k available (5329k kernel code, 29452k reserved, 2589k data, 696k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xe0770000 - 0xff7fe000 ( 496 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdff70000 ( 511 MB)
[ 0.000000] .init : 0xc17bc000 - 0xc186a000 ( 696 kB)
[ 0.000000] .data : 0xc1534784 - 0xc17bbd80 (2589 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1534784 (5329 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=df006000 soft=df008000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 797.889 MHz processor.
[ 0.008005] Calibrating delay loop (skipped), value calculated using timer frequency.. 1595.77 BogoMIPS (lpj=3191556)
[ 0.008160] pid_max: default: 32768 minimum: 301
[ 0.008292] Security Framework initialized
[ 0.008417] AppArmor: AppArmor initialized
[ 0.008490] Yama: becoming mindful.
[ 0.008717] Mount-cache hash table entries: 512
[ 0.009112] Initializing cgroup subsys cpuacct
[ 0.009198] Initializing cgroup subsys memory
[ 0.009291] Initializing cgroup subsys devices
[ 0.009367] Initializing cgroup subsys freezer
[ 0.009442] Initializing cgroup subsys net_cls
[ 0.009518] Initializing cgroup subsys blkio
[ 0.009605] Initializing cgroup subsys perf_event
[ 0.009743] mce: CPU supports 5 MCE banks
[ 0.010330] SMP alternatives: switching to UP code
[ 0.032433] Freeing SMP alternatives: 24k freed
[ 0.032544] ftrace: allocating 24885 entries in 49 pages
[ 0.036163] weird, boot CPU (#0) not listed by the BIOS.
[ 0.036242] SMP motherboard not detected.
[ 0.036314] Enabling APIC mode: Flat. Using 0 I/O APICs
[ 0.144031] SMP disabled
[ 0.144099] Performance Events: AMD PMU driver.
[ 0.144225] ... version: 0
[ 0.144295] ... bit width: 48
[ 0.144365] ... generic registers: 4
[ 0.144435] ... value mask: 0000ffffffffffff
[ 0.144509] ... max period: 00007fffffffffff
[ 0.144581] ... fixed-purpose events: 0
[ 0.144651] ... event mask: 000000000000000f
[ 0.145763] Brought up 1 CPUs
[ 0.145833] Total of 1 processors activated (1595.77 BogoMIPS).
[ 0.146148] devtmpfs: initialized
[ 0.146562] PM: Registering ACPI NVS region at 1ff7f000 (4096 bytes)
[ 0.152127] print_constraints: dummy:
[ 0.152229] Time: 21:40:37 Date: 11/11/11
[ 0.152384] NET: Registered protocol family 16
[ 0.152773] EISA bus registered
[ 0.152849] node 0 link 0: io port [1000, fffff]
[ 0.152858] TOM: 0000000020000000 aka 512M
[ 0.152932] node 0 link 0: mmio [a0000, bffff]
[ 0.152941] node 0 link 0: mmio [20000000, fe0bffff]
[ 0.152949] bus: [00, ff] on node 0 link 0
[ 0.152957] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.152964] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.152971] bus: 00 index 2 [mem 0x20000000-0xffffffff]
[ 0.153330] PCI: PCI BIOS revision 2.10 entry at 0xfd8bc, last bus=2
[ 0.153406] PCI: Using configuration type 1 for base access
[ 0.156495] bio: create slab <bio-0> at 0
[ 0.156767] ACPI: Interpreter disabled.
[ 0.156978] vgaarb: loaded
[ 0.157636] SCSI subsystem initialized
[ 0.157807] libata version 3.00 loaded.
[ 0.157922] usbcore: registered new interface driver usbfs
[ 0.158022] usbcore: registered new interface driver hub
[ 0.158153] usbcore: registered new device driver usb
[ 0.158447] PCI: Probing PCI hardware
[ 0.158519] PCI: Probing PCI hardware (bus 00)
[ 0.158608] pci 0000:00:00.0: [10de:00d1] type 0 class 0x000600
[ 0.158626] pci 0000:00:00.0: reg 10: [mem 0xe8000000-0xefffffff pref]
[ 0.158703] pci 0000:00:01.0: [10de:00d0] type 0 class 0x000601
[ 0.158768] pci 0000:00:01.1: [10de:00d4] type 0 class 0x000c05
[ 0.158806] pci 0000:00:01.1: reg 20: [io 0x2040-0x207f]
[ 0.158819] pci 0000:00:01.1: reg 24: [io 0x2000-0x203f]
[ 0.158844] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.158853] pci 0000:00:01.1: PME# disabled
[ 0.158882] pci 0000:00:02.0: [10de:00d7] type 0 class 0x000c03
[ 0.158900] pci 0000:00:02.0: reg 10: [mem 0xe0000000-0xe0000fff]
[ 0.158949] pci 0000:00:02.0: supports D1 D2
[ 0.158956] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.158964] pci 0000:00:02.0: PME# disabled
[ 0.158989] pci 0000:00:02.1: [10de:00d7] type 0 class 0x000c03
[ 0.159007] pci 0000:00:02.1: reg 10: [mem 0xe0001000-0xe0001fff]
[ 0.159057] pci 0000:00:02.1: supports D1 D2
[ 0.159063] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.159071] pci 0000:00:02.1: PME# disabled
[ 0.159094] pci 0000:00:02.2: [10de:00d8] type 0 class 0x000c03
[ 0.159112] pci 0000:00:02.2: reg 10: [mem 0xe0004000-0xe00040ff]
[ 0.159162] pci 0000:00:02.2: supports D1 D2
[ 0.159168] pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.159177] pci 0000:00:02.2: PME# disabled
[ 0.159209] pci 0000:00:06.0: [10de:00da] type 0 class 0x000401
[ 0.159226] pci 0000:00:06.0: reg 10: [io 0x1400-0x14ff]
[ 0.159239] pci 0000:00:06.0: reg 14: [io 0x1c00-0x1c7f]
[ 0.159251] pci 0000:00:06.0: reg 18: [mem 0xe0002000-0xe0002fff]
[ 0.159290] pci 0000:00:06.0: supports D1 D2
[ 0.159313] pci 0000:00:06.1: [10de:00d9] type 0 class 0x000703
[ 0.159330] pci 0000:00:06.1: reg 10: [io 0x1800-0x18ff]
[ 0.159343] pci 0000:00:06.1: reg 14: [io 0x1c80-0x1cff]
[ 0.159355] pci 0000:00:06.1: reg 18: [mem 0xe0003000-0xe0003fff]
[ 0.159395] pci 0000:00:06.1: PME# supported from D3cold
[ 0.159403] pci 0000:00:06.1: PME# disabled
[ 0.159433] pci 0000:00:08.0: [10de:00d5] type 0 class 0x000101
[ 0.159470] pci 0000:00:08.0: reg 20: [io 0x2080-0x208f]
[ 0.159514] pci 0000:00:0a.0: [10de:00dd] type 1 class 0x000604
[ 0.159555] pci 0000:00:0b.0: [10de:00d2] type 1 class 0x000604
[ 0.159619] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[ 0.159666] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[ 0.159704] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[ 0.159742] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[ 0.159781] PCI: peer root bus 00 res updated from pci conf
[ 0.159817] pci 0000:02:00.0: [104c:8026] type 0 class 0x000c00
[ 0.159840] pci 0000:02:00.0: reg 10: [mem 0xe0108000-0xe01087ff]
[ 0.159855] pci 0000:02:00.0: reg 14: [mem 0xe0100000-0xe0103fff]
[ 0.159917] pci 0000:02:00.0: supports D1 D2
[ 0.159923] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.159932] pci 0000:02:00.0: PME# disabled
[ 0.159958] pci 0000:02:01.0: [10ec:8139] type 0 class 0x000200
[ 0.159980] pci 0000:02:01.0: reg 10: [io 0x7000-0x70ff]
[ 0.159995] pci 0000:02:01.0: reg 14: [mem 0xe0108800-0xe01088ff]
[ 0.160065] pci 0000:02:01.0: supports D1 D2
[ 0.160072] pci 0000:02:01.0: PME# supported from D1 D2 D3hot D3cold
[ 0.160081] pci 0000:02:01.0: PME# disabled
[ 0.160104] pci 0000:02:02.0: [14e4:4320] type 0 class 0x000280
[ 0.160123] pci 0000:02:02.0: reg 10: [mem 0xe0104000-0xe0105fff]
[ 0.160196] pci 0000:02:04.0: [104c:ac54] type 2 class 0x000607
[ 0.160219] pci 0000:02:04.0: reg 10: [mem 0xe0106000-0xe0106fff]
[ 0.160243] pci 0000:02:04.0: supports D1 D2
[ 0.160249] pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.160258] pci 0000:02:04.0: PME# disabled
[ 0.160285] pci 0000:02:04.1: [104c:ac54] type 2 class 0x000607
[ 0.160307] pci 0000:02:04.1: reg 10: [mem 0xe0107000-0xe0107fff]
[ 0.160331] pci 0000:02:04.1: supports D1 D2
[ 0.160337] pci 0000:02:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.160346] pci 0000:02:04.1: PME# disabled
[ 0.160374] pci 0000:02:04.2: [104c:8201] type 0 class 0x000880
[ 0.160394] pci 0000:02:04.2: reg 10: [io 0x7400-0x743f]
[ 0.160503] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[ 0.160579] pci 0000:00:0a.0: bridge window [io 0x3000-0x7fff]
[ 0.160588] pci 0000:00:0a.0: bridge window [mem 0xe0100000-0xe17fffff]
[ 0.160598] pci 0000:00:0a.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.160650] pci_bus 0000:03: [bus 03-06] partially hidden behind bridge 0000:02 [bus 02-02]
[ 0.160778] pci_bus 0000:07: [bus 07-0a] partially hidden behind bridge 0000:02 [bus 02-02]
[ 0.160903] pci 0000:01:00.0: [10de:0179] type 0 class 0x000300
[ 0.160930] pci 0000:01:00.0: reg 10: [mem 0xe2000000-0xe2ffffff]
[ 0.160946] pci 0000:01:00.0: reg 14: [mem 0xf0000000-0xf7ffffff pref]
[ 0.160963] pci 0000:01:00.0: reg 18: [mem 0xf8000000-0xf807ffff pref]
[ 0.161005] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.161084] pci 0000:00:0b.0: PCI bridge to [bus 01-01]
[ 0.161160] pci 0000:00:0b.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.161170] pci 0000:00:0b.0: bridge window [mem 0xe2000000-0xe2ffffff]
[ 0.161180] pci 0000:00:0b.0: bridge window [mem 0xf0000000-0xf80fffff pref]
[ 0.162883] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.163135] pci 0000:00:01.0: default IRQ router [10de:00d0]
[ 0.163271] PCI: pci_cache_line_size set to 64 bytes
[ 0.163378] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.163385] reserve RAM buffer: 000000001ff70000 - 000000001fffffff
[ 0.163643] NetLabel: Initializing
[ 0.163713] NetLabel: domain hash size = 128
[ 0.163782] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.163878] NetLabel: unlabeled traffic allowed by default
[ 0.181690] AppArmor: AppArmor Filesystem Enabled
[ 0.181810] pnp: PnP ACPI: disabled
[ 0.181882] PnPBIOS: Scanning system for PnP BIOS support...
[ 0.181992] PnPBIOS: Found PnP BIOS installation structure at 0xc00f72c0
[ 0.182069] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xb71e, dseg 0x400
[ 0.183016] pnp 00:00: [mem 0x00000000-0xffffffff disabled]
[ 0.183024] pnp 00:00: [mem 0x000e0000-0x000fffff]
[ 0.183031] pnp 00:00: [mem 0x00100000-0x1ff7ffff]
[ 0.183142] system 00:00: Plug and Play BIOS device, IDs PNP0c01 (disabled)
[ 0.183160] pnp 00:01: [io 0x0000-0x000f]
[ 0.183166] pnp 00:01: [io 0x0081-0x008f]
[ 0.183173] pnp 00:01: [io 0x00c0-0x00df]
[ 0.183179] pnp 00:01: [dma 4]
[ 0.183234] pnp 00:01: Plug and Play BIOS device, IDs PNP0200 (active)
[ 0.183250] pnp 00:02: [io 0x0020-0x0021]
[ 0.183256] pnp 00:02: [io 0x00a0-0x00a1]
[ 0.183263] pnp 00:02: [irq 2]
[ 0.183310] pnp 00:02: Plug and Play BIOS device, IDs PNP0000 (active)
[ 0.183325] pnp 00:03: [io 0x0040-0x0043]
[ 0.183331] pnp 00:03: [irq 0]
[ 0.183377] pnp 00:03: Plug and Play BIOS device, IDs PNP0100 (active)
[ 0.183393] pnp 00:04: [io 0x0070-0x0071]
[ 0.183399] pnp 00:04: [irq 8]
[ 0.183445] pnp 00:04: Plug and Play BIOS device, IDs PNP0b00 (active)
[ 0.183460] pnp 00:05: [io 0x0060]
[ 0.183466] pnp 00:05: [io 0x0064]
[ 0.183472] pnp 00:05: [irq 1]
[ 0.183518] pnp 00:05: Plug and Play BIOS device, IDs PNP0303 (active)
[ 0.183534] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.183540] pnp 00:06: [irq 13]
[ 0.183594] pnp 00:06: Plug and Play BIOS device, IDs PNP0c04 (active)
[ 0.183609] pnp 00:07: [io 0x0061]
[ 0.183656] pnp 00:07: Plug and Play BIOS device, IDs PNP0800 (active)
[ 0.183672] pnp 00:08: [mem 0x000d0000-0x000d3fff]
[ 0.183760] system 00:08: [mem 0x000d0000-0x000d3fff] could not be reserved
[ 0.183840] system 00:08: Plug and Play BIOS device, IDs PNP0c02 (active)
[ 0.183857] pnp 00:09: [io 0xfe00-0xfe01]
[ 0.183950] system 00:09: [io 0xfe00-0xfe01] has been reserved
[ 0.184020] system 00:09: Plug and Play BIOS device, IDs PNP0c02 (active)
[ 0.184037] pnp 00:0a: [io 0x0cf8-0x0cff]
[ 0.184088] pnp 00:0a: Plug and Play BIOS device, IDs PNP0a03 (active)
[ 0.184104] pnp 00:0b: [io 0x004e-0x004f]
[ 0.184203] system 00:0b: Plug and Play BIOS device, IDs PNP0c02 (active)
[ 0.184356] pnp 00:0c: [mem 0x000cfc00-0x000cffff]
[ 0.184443] system 00:0c: [mem 0x000cfc00-0x000cffff] has been reserved
[ 0.184522] system 00:0c: Plug and Play BIOS device, IDs PNP0c02 (active)
[ 0.185176] pnp 00:0e: [irq 12]
[ 0.185234] pnp 00:0e: Plug and Play BIOS device, IDs PNP0f13 (active)
[ 0.186253] pnp 00:12: [io 0x0378-0x037f]
[ 0.186260] pnp 00:12: [io 0x0778-0x077f]
[ 0.186266] pnp 00:12: [irq 7]
[ 0.186272] pnp 00:12: [dma 1]
[ 0.186400] pnp 00:12: Plug and Play BIOS device, IDs PNP0401 (active)
[ 0.186411] PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver
[ 0.190986] PCI: max bus depth: 2 pci_try_num: 3
[ 0.191024] pci 0000:00:0a.0: BAR 15: assigned [mem 0x20000000-0x27ffffff pref]
[ 0.191124] pci 0000:02:04.0: BAR 15: assigned [mem 0x20000000-0x23ffffff pref]
[ 0.191219] pci 0000:02:04.0: BAR 16: can't assign mem (size 0x4000000)
[ 0.191299] pci 0000:02:04.1: BAR 15: assigned [mem 0x24000000-0x27ffffff pref]
[ 0.191392] pci 0000:02:04.1: BAR 16: can't assign mem (size 0x4000000)
[ 0.191470] pci 0000:02:04.0: BAR 13: assigned [io 0x3000-0x30ff]
[ 0.191546] pci 0000:02:04.0: BAR 14: assigned [io 0x3400-0x34ff]
[ 0.191622] pci 0000:02:04.1: BAR 13: assigned [io 0x3800-0x38ff]
[ 0.191699] pci 0000:02:04.1: BAR 14: assigned [io 0x3c00-0x3cff]
[ 0.191775] pci 0000:02:04.0: CardBus bridge to [bus 03-06]
[ 0.191850] pci 0000:02:04.0: bridge window [io 0x3000-0x30ff]
[ 0.191928] pci 0000:02:04.0: bridge window [io 0x3400-0x34ff]
[ 0.192007] pci 0000:02:04.0: bridge window [mem 0x20000000-0x23ffffff pref]
[ 0.192020] pci 0000:02:04.1: CardBus bridge to [bus 07-0a]
[ 0.192094] pci 0000:02:04.1: bridge window [io 0x3800-0x38ff]
[ 0.192171] pci 0000:02:04.1: bridge window [io 0x3c00-0x3cff]
[ 0.192249] pci 0000:02:04.1: bridge window [mem 0x24000000-0x27ffffff pref]
[ 0.192343] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[ 0.192418] pci 0000:00:0a.0: bridge window [io 0x3000-0x7fff]
[ 0.192496] pci 0000:00:0a.0: bridge window [mem 0xe0100000-0xe17fffff]
[ 0.192574] pci 0000:00:0a.0: bridge window [mem 0x20000000-0x27ffffff pref]
[ 0.192672] pci 0000:01:00.0: BAR 6: assigned [mem 0xf8080000-0xf809ffff pref]
[ 0.192765] pci 0000:00:0b.0: PCI bridge to [bus 01-01]
[ 0.192838] pci 0000:00:0b.0: bridge window [io disabled]
[ 0.192915] pci 0000:00:0b.0: bridge window [mem 0xe2000000-0xe2ffffff]
[ 0.192995] pci 0000:00:0b.0: bridge window [mem 0xf0000000-0xf80fffff pref]
[ 0.193099] pci 0000:00:0a.0: setting latency timer to 64
[ 0.193133] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.193140] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.193148] pci_bus 0000:00: resource 6 [mem 0x20000000-0xffffffff]
[ 0.193156] pci_bus 0000:02: resource 0 [io 0x3000-0x7fff]
[ 0.193163] pci_bus 0000:02: resource 1 [mem 0xe0100000-0xe17fffff]
[ 0.193171] pci_bus 0000:02: resource 2 [mem 0x20000000-0x27ffffff pref]
[ 0.193179] pci_bus 0000:03: resource 0 [io 0x3000-0x30ff]
[ 0.193186] pci_bus 0000:03: resource 1 [io 0x3400-0x34ff]
[ 0.193194] pci_bus 0000:03: resource 2 [mem 0x20000000-0x23ffffff pref]
[ 0.193202] pci_bus 0000:07: resource 0 [io 0x3800-0x38ff]
[ 0.193209] pci_bus 0000:07: resource 1 [io 0x3c00-0x3cff]
[ 0.193216] pci_bus 0000:07: resource 2 [mem 0x24000000-0x27ffffff pref]
[ 0.193224] pci_bus 0000:01: resource 1 [mem 0xe2000000-0xe2ffffff]
[ 0.193232] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf80fffff pref]
[ 0.193324] NET: Registered protocol family 2
[ 0.193532] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.194080] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.194359] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.194625] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.194700] TCP reno registered
[ 0.196020] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.196105] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.196335] NET: Registered protocol family 1
[ 0.344104] PCI: CLS mismatch (64 != 32), using 64 bytes
[ 0.344129] pci 0000:01:00.0: Boot video device
[ 0.344800] audit: initializing netlink socket (disabled)
[ 0.344887] type=2000 audit(1321047637.344:1): initialized
[ 0.404666] Trying to unpack rootfs image as initramfs...
[ 0.476245] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.485453] VFS: Disk quotas dquot_6.5.2
[ 0.485682] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.492334] fuse init (API version 7.16)
[ 0.492665] msgmni has been set to 964
[ 0.504962] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.505122] io scheduler noop registered
[ 0.505193] io scheduler deadline registered
[ 0.505302] io scheduler cfq registered (default)
[ 0.505750] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.505892] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.506310] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.509913] Linux agpgart interface v0.103
[ 0.510040] agpgart-amd64 0000:00:00.0: AGP bridge [10de/00d1]
[ 0.510121] agpgart-amd64 0000:00:00.0: aperture size 4096 MB is not right, using settings from NB
[ 0.510222] agpgart-amd64 0000:00:00.0: setting up Nforce3 AGP
[ 0.517325] isapnp: Scanning for PnP cards...
[ 0.576992] agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xe8000000
[ 0.584920] brd: module loaded
[ 0.586622] loop: module loaded
[ 0.587193] pata_acpi 0000:00:08.0: setting latency timer to 64
[ 0.588233] Fixed MDIO Bus: probed
[ 0.588373] PPP generic driver version 2.4.2
[ 0.588542] tun: Universal TUN/TAP device driver, 1.6
[ 0.588614] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.588871] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.588992] ehci_hcd 0000:00:02.2: setting latency timer to 64
[ 0.589000] ehci_hcd 0000:00:02.2: EHCI Host Controller
[ 0.589170] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
[ 0.589315] ehci_hcd 0000:00:02.2: cache line size of 64 is not supported
[ 0.589336] ehci_hcd 0000:00:02.2: irq 10, io mem 0xe0004000
[ 0.600714] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00
[ 0.601134] hub 1-0:1.0: USB hub found
[ 0.601211] hub 1-0:1.0: 6 ports detected
[ 0.601446] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.601569] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 0.601577] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 0.601735] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 0.601855] ohci_hcd 0000:00:02.0: irq 11, io mem 0xe0000000
[ 0.670400] hub 2-0:1.0: USB hub found
[ 0.670485] hub 2-0:1.0: 3 ports detected
[ 0.670731] ohci_hcd 0000:00:02.1: setting latency timer to 64
[ 0.670739] ohci_hcd 0000:00:02.1: OHCI Host Controller
[ 0.670901] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
[ 0.671023] ohci_hcd 0000:00:02.1: irq 10, io mem 0xe0001000
[ 0.750819] hub 3-0:1.0: USB hub found
[ 0.750904] hub 3-0:1.0: 3 ports detected
[ 0.751142] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.751444] i8042: PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
[ 0.760051] i8042: Detected active multiplexing controller, rev 1.1
[ 0.892065] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.892153] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.892229] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.892304] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.892379] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.892671] mousedev: PS/2 mouse device common for all mice
[ 0.900385] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.900483] rtc0: alarms up to one day, 114 bytes nvram
[ 0.900845] device-mapper: uevent: version 1.0.3
[ 0.901111] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 0.901289] EISA: Probing bus 0 at eisa.0
[ 0.901364] EISA: Cannot allocate resource for mainboard
[ 0.901438] Cannot allocate resource for EISA slot 1
[ 0.901511] Cannot allocate resource for EISA slot 2
[ 0.901583] Cannot allocate resource for EISA slot 3
[ 0.901656] Cannot allocate resource for EISA slot 4
[ 0.901728] Cannot allocate resource for EISA slot 5
[ 0.901801] Cannot allocate resource for EISA slot 6
[ 0.901873] Cannot allocate resource for EISA slot 7
[ 0.901946] Cannot allocate resource for EISA slot 8
[ 0.902018] EISA: Detected 0 cards.
[ 0.902103] cpufreq-nforce2: No nForce2 chipset.
[ 0.902176] cpuidle: using governor ladder
[ 0.902246] cpuidle: using governor menu
[ 0.902316] EFI Variables Facility v0.08 2004-May-17
[ 0.903034] TCP cubic registered
[ 0.908037] NET: Registered protocol family 10
[ 0.909424] NET: Registered protocol family 17
[ 0.909537] Registering the dns_resolver key type
[ 0.909695] Using IPI No-Shortcut mode
[ 0.909977] PM: Hibernation image not present or could not be loaded.
[ 0.910001] registered taskstats version 1
[ 0.926367] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.063157] isapnp: No Plug & Play device found
[ 1.312322] usb 2-2: new low speed USB device number 2 using ohci_hcd
[ 1.404197] Switching to clocksource tsc
[ 1.683623] Freeing initrd memory: 13304k freed
[ 1.716815] Magic number: 3:219:702
[ 1.717010] rtc_cmos 00:04: setting system clock to 2011-11-11 21:40:39 UTC (1321047639)
[ 1.717107] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ (1 cpu cores) (version 2.20.00)
[ 1.721958] [Firmware Bug]: powernow-k8: No PSB or ACPI _PSS objects
[ 1.722034] powernow-k8: Make sure that your BIOS is up to date and Cool'N'Quiet support is enabled in BIOS setup
[ 1.722136] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.722209] EDD information not available.
[ 1.722537] Freeing unused kernel memory: 696k freed
[ 1.723451] Write protecting the kernel text: 5332k
[ 1.723609] Write protecting the kernel read-only data: 2188k
[ 1.762764] udevd[76]: starting version 173
[ 1.939306] pata_amd 0000:00:08.0: version 0.4.1
[ 1.939402] pata_amd 0000:00:08.0: setting latency timer to 64
[ 1.993900] scsi0 : pata_amd
[ 1.997820] scsi1 : pata_amd
[ 1.998025] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x2080 irq 14
[ 1.998104] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2088 irq 15
[ 2.011515] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 2.011640] 8139cp 0000:02:01.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 2.050982] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x04, vendor 0x4243)
[ 2.050997] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x05, vendor 0x4243)
[ 2.051008] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x02, vendor 0x4243)
[ 2.051019] ssb: Core 3 found: V90 (cc 0x807, rev 0x02, vendor 0x4243)
[ 2.051029] ssb: Core 4 found: PCI (cc 0x804, rev 0x09, vendor 0x4243)
[ 2.054466] ssb: Sonics Silicon Backplane found on PCI device 0000:02:02.0
[ 2.393791] ata1.00: ATA-6: FUJITSU MHT2060AT PL, 0022, max UDMA/100
[ 2.393877] ata1.00: 117210240 sectors, multi 16: LBA
[ 2.393961] ata1: nv_mode_filter: 0x3f39f&0x3f3ff->0x3f39f, BIOS=0x3f000 (0xc6000000) ACPI=0x0
[ 2.408448] ata1.00: configured for UDMA/100
[ 2.408783] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHT2060A 0022 PQ: 0 ANSI: 5
[ 2.409258] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.409638] sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB)
[ 2.409845] sd 0:0:0:0: [sda] Write Protect is off
[ 2.409921] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.409973] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.515845] sda: sda1 sda2 < sda5 >
[ 2.516571] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.588389] ata2.00: ATAPI: SD-R6252, 1A11, max MWDMA2
[ 2.588471] ata2: nv_mode_filter: 0x39f&0xfffff->0x39f, BIOS=0x0 (0xc6000000) ACPI=0x0
[ 2.620337] ata2.00: configured for MWDMA2
[ 2.626555] scsi 1:0:0:0: CD-ROM TOSHIBA ODD-DVD SD-R6252 1A11 PQ: 0 ANSI: 5
[ 2.631175] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 2.631253] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.631545] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.631672] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.634910] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 2.639662] 8139too 0000:02:01.0: eth0: RealTek RTL8139 at 0x7000, 00:0f:b0:01:07:31, IRQ 10
[ 2.643255] input: HID 04b3:310b as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input1
[ 2.643614] generic-usb 0003:04B3:310B.0001: input,hidraw0: USB HID v1.00 Mouse [HID 04b3:310b] on usb-0000:00:02.0-2/input0
[ 2.643748] usbcore: registered new interface driver usbhid
[ 2.643821] usbhid: USB HID core driver
[ 2.700172] firewire_ohci: Added fw-ohci device 0000:02:00.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 3.054589] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 3.054674] EXT4-fs (sda1): write access will be enabled during recovery
[ 3.120317] EXT4-fs (sda1): recovery complete
[ 3.120885] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.200324] firewire_core: created device fw0: GUID 463f0200463f0200, S400
[ 30.600921] udevd[261]: starting version 173
[ 30.670359] lp: driver loaded but no devices found
[ 30.715718] Adding 521212k swap on /dev/sda5. Priority:-1 extents:1 across:521212k
[ 30.950551] i2c i2c-0: nForce2 SMBus adapter at 0x2040
[ 30.950687] i2c i2c-1: nForce2 SMBus adapter at 0x2000
[ 30.951896] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,user_xattr
[ 31.178761] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 31.516383] type=1400 audit(1321047669.296:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=471 comm="apparmor_parser"
[ 31.518361] type=1400 audit(1321047669.296:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=471 comm="apparmor_parser"
[ 31.519126] type=1400 audit(1321047669.296:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=471 comm="apparmor_parser"
[ 31.531634] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 31.707749] nf_conntrack version 0.5.0 (7934 buckets, 31736 max)
[ 31.807732] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 32.002450] yenta_cardbus 0000:02:04.0: CardBus bridge found [103c:006d]
[ 32.002483] yenta_cardbus 0000:02:04.0: CardBus bridge to [bus 03-06]
[ 32.002492] yenta_cardbus 0000:02:04.0: bridge window [io 0x3000-0x30ff]
[ 32.002503] yenta_cardbus 0000:02:04.0: bridge window [io 0x3400-0x34ff]
[ 32.002514] yenta_cardbus 0000:02:04.0: bridge window [mem 0x20000000-0x23ffffff pref]
[ 32.002525] yenta_cardbus 0000:02:04.0: bridge window [mem 0xe0400000-0xe07fffff]
[ 32.002536] yenta_cardbus 0000:02:04.0: Enabling burst memory read transactions
[ 32.002546] yenta_cardbus 0000:02:04.0: Using CSCINT to route CSC interrupts to PCI
[ 32.002553] yenta_cardbus 0000:02:04.0: Routing CardBus interrupts to PCI
[ 32.002564] yenta_cardbus 0000:02:04.0: TI: mfunc 0x01111d22, devctl 0x64
[ 32.234777] yenta_cardbus 0000:02:04.0: ISA IRQ mask 0x02f8, PCI irq 11
[ 32.234788] yenta_cardbus 0000:02:04.0: Socket status: 30000086
[ 32.234799] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06
[ 32.234820] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [io 0x3000-0x7fff]
[ 32.234830] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x7fff: excluding 0x3000-0x30ff 0x3400-0x34ff 0x3800-0x38ff 0x3c00-0x3cff
[ 32.550162] input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input2
[ 32.571505] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input3
[ 32.744246] cfg80211: Calling CRDA to update world regulatory domain
[ 32.776088] nvidia: module license 'NVIDIA' taints kernel.
[ 32.776099] Disabling lock debugging due to kernel taint
[ 32.803632] 0x7000-0x70ff 0x7400-0x743f
[ 33.689620] 8139too 0000:02:01.0: eth0: link down
[ 33.689829] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 33.789124]
[ 33.789140] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0xe0100000-0xe17fffff]
[ 33.789153] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe0100000-0xe17fffff: excluding 0xe0100000-0xe026ffff 0xe03e0000-0xe082ffff
[ 33.789190] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0x20000000-0x27ffffff pref]
[ 33.789199] pcmcia_socket pcmcia_socket0: cs: memory probe 0x20000000-0x27ffffff: excluding 0x20000000-0x27ffffff
[ 33.839067] type=1400 audit(1321047671.616:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=675 comm="apparmor_parser"
[ 33.845315] yenta_cardbus 0000:02:04.1: CardBus bridge found [103c:006d]
[ 33.845344] yenta_cardbus 0000:02:04.1: Using CSCINT to route CSC interrupts to PCI
[ 33.845352] yenta_cardbus 0000:02:04.1: Routing CardBus interrupts to PCI
[ 33.845363] yenta_cardbus 0000:02:04.1: TI: mfunc 0x01111d22, devctl 0x64
[ 33.853458] type=1400 audit(1321047671.632:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=683 comm="apparmor_parser"
[ 33.854653] type=1400 audit(1321047671.632:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=683 comm="apparmor_parser"
[ 33.855425] type=1400 audit(1321047671.632:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=683 comm="apparmor_parser"
[ 33.901053] type=1400 audit(1321047671.680:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=689 comm="apparmor_parser"
[ 33.933248] type=1400 audit(1321047671.712:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=689 comm="apparmor_parser"
[ 33.954134] type=1400 audit(1321047671.732:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=689 comm="apparmor_parser"
[ 34.080538] yenta_cardbus 0000:02:04.1: ISA IRQ mask 0x02f8, PCI irq 10
[ 34.080549] yenta_cardbus 0000:02:04.1: Socket status: 30000006
[ 34.080560] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #06 to #0a
[ 34.080579] yenta_cardbus 0000:02:04.1: pcmcia: parent PCI bridge window: [io 0x3000-0x7fff]
[ 34.080589] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3000-0x7fff: excluding 0x3000-0x30ff 0x3400-0x34ff 0x3800-0x38ff 0x3c00-0x3cff
[ 34.304330] apm: BIOS not found.
[ 34.358643] init: apport pre-start process (748) terminated with status 1
[ 34.362100] init: alsa-restore main process (753) terminated with status 19
[ 34.415779] init: apport post-stop process (777) terminated with status 1
[ 34.678835] 0x7000-0x70ff 0x7400-0x743f
Bookmarks