I also must have dual monitor support. I have a NVidia card and the NVidia XServer application works OK enabling dual monitor though it does put the dash on the left monitor which I don't especially like. I've heard this will be fixed in 12.4.
I usually use an application called disper tied to a keyboard shortcut to enable dual monitors, disper -e -t left, but that is failing. I may just need to change the parameters to get it to work but haven't had the time to play with it.
Scott
Fingerprint reader not working correctly.
I upgraded through the software update app. From 10.10, to 11.4 then to 11.10, in quick succession(1 day). I stayed with 10.10 until 11.10 came out as 11.4 just seemed to raw to me.
Now the fingerprint reader doesn't come up at all for GUI sudo sign ins. It does come up when I do sudo in a terminal and it does work but i get the following err.
Code:(process:12093): GConf-WARNING **: Client failed to connect to the D-BUS daemon: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. QGtkStyle was unable to detect the current GTK+ theme.
You should use the torrent link. It will be less demand on the servers, a much faster download and you can leave transmission (or whatever you use) open for a while to "give back" to others doing the same thing.
http://www.ubuntu.com/download/ubunt...ve-download#bt
ok when i try to desktop record while playing minecraft now it just laggs..... before (11.04) i could take perfect video but now its like my video card is being raped.....
Hi all
I've updated with lot of problems I have the Serp7
I lost the wireless connection
and the commandCode:dmesg | grep iwl [ 20.580303] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: [ 20.580306] iwlagn: Copyright(c) 2003-2011 Intel Corporation [ 20.580408] iwlagn 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 20.580439] iwlagn 0000:04:00.0: setting latency timer to 64 [ 20.580515] iwlagn 0000:04:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0 [ 20.596426] iwlagn 0000:04:00.0: device EEPROM VER=0x716, CALIB=0x6 [ 20.596430] iwlagn 0000:04:00.0: Device SKU: 0Xb [ 20.596432] iwlagn 0000:04:00.0: Valid Tx ant: 0X3, Valid Rx ant: 0X3 [ 20.597484] iwlagn 0000:04:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels [ 20.597616] iwlagn 0000:04:00.0: irq 51 for MSI/MSI-X [ 20.685636] iwlagn 0000:04:00.0: loaded firmware version 17.168.5.1 build 33993 [ 20.687984] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 22.215823] iwlagn 0000:04:00.0: Error sending REPLY_TX_LINK_QUALITY_CMD: time out after 500ms
I can switch the wireless card on and off using the keyboard keys but I can't connect to any networkCode:dmesg | grep wlan0 [ 22.220235] ADDRCONF(NETDEV_UP): wlan0: link is not read
and the output of other commands:
Code:uname -a Linux TAO76 3.0.0-12-generic #20-Ubuntu SMP Fri Oct 7 14:56:25 UTC 2011 x86_64 x86_64 x86_64 GNU/LinuxI've tried everything available online but no success.Code:iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11abgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off ifconfig wlan0 wlan0 Link encap:Ethernet HWaddr 88:53:2e:19:4c:22 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Also I've noticed another problem after upgrading: the webcam when used the LED is not turned on (very weird!!)
For the strange problems happened regarding the desktop: http://ubuntuforums.org/showthread.php?t=1862625
I hope if there is someone here to help with the wireless.
Thanks
I upgraded via update manager. It failed a few times saying the internet connection went down and when it finally worked I rebooted, got to the login screen no problems, logged in and it then tells me it's connected to my wireless network and that's it... I can see unity on the left and my folders on the desktop, the wireless notification doesn't dissappear and I'm unable to click on anything. Alt+tab, ctrl+alt+delete all do nothing and I'm stuck!
Any help?
I got a solution for Ubuntu Wireless card on Serval7 after upgrading to 11.10
I just made the connection open and the connection is established there must be a problem with WPA module I'll investigate the problem and let you know.
The problem is with wpa_supplicant the wireless manager can't communicate with the wpa_supplicant.
I've used wpa_gui: the program didn't recognize any wireless card
I've tries sudo wpa_gui and I was able to configure the wireless card and establish the connection but the probelm I can't save the configuration because the update_conf should be 1
I'll try to see what's happening apparently the problem is that: services are not given root access when running from the desktop like: software-center and synaptic and network-manager
it doesn't even ask for root password.
Bookmarks