Page 3 of 3 FirstFirst 123
Results 21 to 25 of 25

Thread: Asus AT5NM10-I screen resolution problem

  1. #21
    Join Date
    Sep 2011
    Beans
    13

    Re: Asus AT5NM10-I screen resolution problem

    Yeah I found that really strange too but thats true i just cant do resolutions starter by 1280.

    Do u want me to show u how i did?


    If I go run:
    Code:
    xrandr -addmode VGA1 1366x768
    Its added ant then I can go to Monitor Preferences and changed to it (Of course is out of ranged)
    Last edited by Miguelbu; September 22nd, 2011 at 05:54 PM.

  2. #22
    Join Date
    Sep 2011
    Beans
    13

    Re: Asus AT5NM10-I screen resolution problem

    Screen 0: minimum 320 x 200, current 1024 x 768, maximum 4096 x 4096
    LVDS1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
    1366x768 60.0 +
    1360x768 59.8 60.0
    1024x768 60.0*
    800x600 60.3 56.2
    640x480 59.9
    VGA1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
    1024x768 60.0*
    800x600 60.3 56.2
    848x480 60.0
    640x480 59.9
    Atually I can add this resolution only because it appears in LVDS1.. I tried others and couldn't.

    What is LVDS1? I found id I change my resolution LVDS1 also changes to the new one:
    Screen 0: minimum 320 x 200, current 1024 x 768, maximum 4096 x 4096
    LVDS1 connected 800x600+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
    1366x768 60.0 +
    1360x768 59.8 60.0
    1024x768 60.0*
    800x600 60.3 56.2
    640x480 59.9
    VGA1 connected 800x600+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
    1024x768 60.0*
    800x600 60.3 56.2
    848x480 60.0
    640x480 59.9



    ALso in Xorg.conf that is in my /usr dir it says I have "nouveau" Driver. That one is compatible with Intel?
    Last edited by Miguelbu; September 22nd, 2011 at 08:12 PM.

  3. #23
    Join Date
    Sep 2011
    Beans
    13

    Re: Asus AT5NM10-I screen resolution problem

    [SOLVED]
    Solution:

    My main problem was that the code mode dind't have the same name

    SO:

    1ºCommand
    Code:
    xrandr --newmode "1280x1024"  109.00  1280 1368 1496 1712  1024 1027 1034 1063 -hsync +vsync
    2ºCommand
    Code:
    xrandr --addmode VGA1 1280x1024
    "1280x1024" is the name You want to give him (U can actually call it what ever u want)

    AND NOT:

    Code:
    xrandr --newmode "1280x1024_60.00"  109.00  1280 1368 1496 1712  1024 1027 1034 1063 -hsync +vsync
    2ºCommand
    Code:
    xrandr --addmode VGA1 1280x1024
    If U Want to Use in command 1º the name of the mode "1280x1024_60.00" in command 2º it must have the same name.

    Also Instead of copypaste the code from forum I did:

    Code:
    cvt 1280 1024
    Use This code To generate part of 1º Command instead of copypaste it from the net.(might have wrong characters.

    If u want for example 1280x736 resolution Do:
    Code:
    cvt 1280 736
    and change from the first command of xrandr


    Also If U want to do it persistently I used: /etc/gdm/Init/Default script and add the code just before
    /sbin/initctl -q emit login-session-start DISPLAY_MANAGER=gdm
    line.

    To do this u must use
    Code:
    sudo gedit /etc/gdm/Init Default
    Ask me if u have any questions, just about this methoth cause im not A PRolinux guy

  4. #24
    Join Date
    Jan 2007
    Beans
    Hidden!
    Distro
    Kubuntu 11.04 Natty Narwhal

    Re: Asus AT5NM10-I screen resolution problem

    Hm,I do not know why you had those problems.
    For sure the problem is not the "_60" term as you described.
    For example,here on my machine this works without trouble:
    Code:
    me@mine:~$ xrandr
    Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192
    LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 194mm
       1366x768       60.0*+
       1360x768       59.8     60.0  
       1024x768       60.0  
       800x600        60.3     56.2  
       640x480        59.9  
    VGA1 disconnected (normal left inverted right x axis y axis)
    HDMI1 disconnected (normal left inverted right x axis y axis)
    DP1 disconnected (normal left inverted right x axis y axis)
    
    me@mine:~$ cvt 1280 768
    # 1280x768 59.87 Hz (CVT) hsync: 47.78 kHz; pclk: 79.50 MHz
    Modeline "1280x768_60.00"   79.50  1280 1344 1472 1664  768 771 781 798 -hsync +vsync
    
    me@mine:~$ xrandr --newmode "1280x768_60.00"   79.50  1280 1344 1472 1664  768 771 781 798 -hsync +vsync
    
    me@mine:~$ xrandr --addmode LVDS1 "1280x768_60.00"
    me@mine:~$ xrandr --output LVDS1 --mode "1280x768_60.00"
    me@mine:~$ xrandr
    Screen 0: minimum 320 x 200, current 1280 x 768, maximum 8192 x 8192
    LVDS1 connected 1280x768+0+0 (normal left inverted right x axis y axis) 344mm x 194mm
       1366x768       60.0 +
       1360x768       59.8     60.0  
       1024x768       60.0  
       800x600        60.3     56.2  
       640x480        59.9  
       1280x768_60.00   59.9* 
    VGA1 disconnected (normal left inverted right x axis y axis)
    HDMI1 disconnected (normal left inverted right x axis y axis)
    DP1 disconnected (normal left inverted right x axis y axis)
    Best app ever: Easystroke

  5. #25
    Join Date
    Sep 2011
    Beans
    13

    Re: Asus AT5NM10-I screen resolution problem

    Yes I know but the 60.00 made the difference or just one character was different don't know I advise people to use the cvt method.

    Now I'm going to explore more of ubuntu and build my HTPC.

Page 3 of 3 FirstFirst 123

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •