Hello all.. I have a USB GSM modem... It takes too long for it to be detected after plugged in... Is there anything I can do to make this process faster???
I'm using Ubuntu 11.04 natty, and the modem is ZTE AC2746 ...
Hello all.. I have a USB GSM modem... It takes too long for it to be detected after plugged in... Is there anything I can do to make this process faster???
I'm using Ubuntu 11.04 natty, and the modem is ZTE AC2746 ...
If you type in a terminal
do you seelsusb
or do you see19d2:fff5
the reason I ask is you may benefit from usb_modeswitch19d2:fff1
http://www.draisberghof.de/usb_modes...07f6a41b4efe23
I get this (among others):
Code:Bus 004 Device 002: ID 19d2:fff1 ONDA Communication S.p.A.
so it is detected as a modem;
this process does take time; you usually have to whistle for a minute or so
I find sakis 3g is quicker;
http://www.sakis3g.org/
but if you choose to install that, you need to look to sakis for support
I'll give it a try.. Thank you
Tried sakis3g ,, it takes the same amount of time... In the waiting time when I try to connect using sakis it gives an error:
Code:Port /dev/ttyUSB0 is currently occupied by 859 modem-manager.
two options to pursue
go to sakis website
http://www.sakis3g.org/
and go to the troubleshooting page
http://wiki.sakis3g.org/wiki/index.p...roubleshooting
read about it
he suggests
which for Ubuntu to me means# sakis3g --debug
also: join his forum; he will help you;sudo sakis3g --debug
if he does, come back and tell us the answer
Ok, I will follow through with him and tell post the result... Thanks a lot
Ok, I will follow through with him and post the result... Thanks a lot
Bookmarks