Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: n600 wireless dual band usb adapter not working

  1. #1
    Join Date
    Apr 2009
    Location
    Florida USA
    Beans
    66
    Distro
    Ubuntu 11.10 Oneiric Ocelot

    n600 wireless dual band usb adapter not working

    I am running the newest Ubuntu and can not get my wireless adapter working.
    I ran
    Code:
     sudo lsusb -v
    and got the following results:
    Code:
            wMaxPacketSize     0x0040  1x 64 bytes
            bInterval               0
          Endpoint Descriptor:
            bLength                 7
            bDescriptorType         5
            bEndpointAddress     0x81  EP 1 IN
            bmAttributes            2
              Transfer Type            Bulk
              Synch Type               None
              Usage Type               Data
            wMaxPacketSize     0x0040  1x 64 bytes
            bInterval               0
          Endpoint Descriptor:
            bLength                 7
            bDescriptorType         5
            bEndpointAddress     0x82  EP 2 IN
            bmAttributes            3
              Transfer Type            Interrupt
              Synch Type               None
              Usage Type               Data
            wMaxPacketSize     0x0008  1x 8 bytes
            bInterval              10
    Device Status:     0x0001
      Self Powered
    
    Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Device Descriptor:
      bLength                18
      bDescriptorType         1
      bcdUSB               1.10
      bDeviceClass            9 Hub
      bDeviceSubClass         0 Unused
      bDeviceProtocol         0 Full speed (or root) hub
      bMaxPacketSize0        64
      idVendor           0x1d6b Linux Foundation
      idProduct          0x0001 1.1 root hub
      bcdDevice            2.06
      iManufacturer           3 Linux 2.6.38-8-generic ohci_hcd
      iProduct                2 OHCI Host Controller
      iSerial                 1 0000:02:01.0
      bNumConfigurations      1
      Configuration Descriptor:
        bLength                 9
        bDescriptorType         2
        wTotalLength           25
        bNumInterfaces          1
        bConfigurationValue     1
        iConfiguration          0 
        bmAttributes         0xe0
          Self Powered
          Remote Wakeup
        MaxPower                0mA
        Interface Descriptor:
          bLength                 9
          bDescriptorType         4
          bInterfaceNumber        0
          bAlternateSetting       0
          bNumEndpoints           1
          bInterfaceClass         9 Hub
          bInterfaceSubClass      0 Unused
          bInterfaceProtocol      0 Full speed (or root) hub
          iInterface              0 
          Endpoint Descriptor:
            bLength                 7
            bDescriptorType         5
            bEndpointAddress     0x81  EP 1 IN
            bmAttributes            3
              Transfer Type            Interrupt
              Synch Type               None
              Usage Type               Data
            wMaxPacketSize     0x0002  1x 2 bytes
            bInterval             255
    Hub Descriptor:
      bLength               9
      bDescriptorType      41
      nNbrPorts             3
      wHubCharacteristic 0x0002
        No power switching (usb 1.0)
        Ganged overcurrent protection
      bPwrOn2PwrGood       15 * 2 milli seconds
      bHubContrCurrent      0 milli Ampere
      DeviceRemovable    0x00
      PortPwrCtrlMask    0xff
     Hub Port Status:
       Port 1: 0000.0100 power
       Port 2: 0000.0103 power enable connect
       Port 3: 0000.0100 power
    Device Status:     0x0003
      Self Powered
      Remote Wakeup Enabled
    
    Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Device Descriptor:
      bLength                18
      bDescriptorType         1
      bcdUSB               2.00
      bDeviceClass            9 Hub
      bDeviceSubClass         0 Unused
      bDeviceProtocol         0 Full speed (or root) hub
      bMaxPacketSize0        64
      idVendor           0x1d6b Linux Foundation
      idProduct          0x0002 2.0 root hub
      bcdDevice            2.06
      iManufacturer           3 Linux 2.6.38-8-generic ehci_hcd
      iProduct                2 EHCI Host Controller
      iSerial                 1 0000:02:02.2
      bNumConfigurations      1
      Configuration Descriptor:
        bLength                 9
        bDescriptorType         2
        wTotalLength           25
        bNumInterfaces          1
        bConfigurationValue     1
        iConfiguration          0 
        bmAttributes         0xe0
          Self Powered
          Remote Wakeup
        MaxPower                0mA
        Interface Descriptor:
          bLength                 9
          bDescriptorType         4
          bInterfaceNumber        0
          bAlternateSetting       0
          bNumEndpoints           1
          bInterfaceClass         9 Hub
          bInterfaceSubClass      0 Unused
          bInterfaceProtocol      0 Full speed (or root) hub
          iInterface              0 
          Endpoint Descriptor:
            bLength                 7
            bDescriptorType         5
            bEndpointAddress     0x81  EP 1 IN
            bmAttributes            3
              Transfer Type            Interrupt
              Synch Type               None
              Usage Type               Data
            wMaxPacketSize     0x0004  1x 4 bytes
            bInterval              12
    Hub Descriptor:
      bLength               9
      bDescriptorType      41
      nNbrPorts             3
      wHubCharacteristic 0x0009
        Per-port power switching
        Per-port overcurrent protection
      bPwrOn2PwrGood       10 * 2 milli seconds
      bHubContrCurrent      0 milli Ampere
      DeviceRemovable    0x00
      PortPwrCtrlMask    0xff
     Hub Port Status:
       Port 1: 0000.0100 power
       Port 2: 0000.0100 power
       Port 3: 0000.0100 power
    Device Status:     0x0003
      Self Powered
      Remote Wakeup Enabled
    
    Bus 002 Device 003: ID 13fd:1840 Initio Corporation 
    Device Descriptor:
      bLength                18
      bDescriptorType         1
      bcdUSB               2.00
      bDeviceClass            0 (Defined at Interface level)
      bDeviceSubClass         0 
      bDeviceProtocol         0 
      bMaxPacketSize0        64
      idVendor           0x13fd Initio Corporation
      idProduct          0x1840 
      bcdDevice            1.03
      iManufacturer           1 Generic 
      iProduct                2 External        
      iSerial                 3 57442D574341553438333339
      bNumConfigurations      1
      Configuration Descriptor:
        bLength                 9
        bDescriptorType         2
        wTotalLength           32
        bNumInterfaces          1
        bConfigurationValue     1
        iConfiguration          0 
        bmAttributes         0xc0
          Self Powered
        MaxPower                2mA
        Interface Descriptor:
          bLength                 9
          bDescriptorType         4
          bInterfaceNumber        0
          bAlternateSetting       0
          bNumEndpoints           2
          bInterfaceClass         8 Mass Storage
          bInterfaceSubClass      6 SCSI
          bInterfaceProtocol     80 Bulk (Zip)
          iInterface              0 
          Endpoint Descriptor:
            bLength                 7
            bDescriptorType         5
            bEndpointAddress     0x81  EP 1 IN
            bmAttributes            2
              Transfer Type            Bulk
              Synch Type               None
              Usage Type               Data
            wMaxPacketSize     0x0200  1x 512 bytes
            bInterval               0
          Endpoint Descriptor:
            bLength                 7
            bDescriptorType         5
            bEndpointAddress     0x02  EP 2 OUT
            bmAttributes            2
              Transfer Type            Bulk
              Synch Type               None
              Usage Type               Data
            wMaxPacketSize     0x0200  1x 512 bytes
            bInterval               0
    Device Qualifier (for other device speed):
      bLength                10
      bDescriptorType         6
      bcdUSB               2.00
      bDeviceClass            0 (Defined at Interface level)
      bDeviceSubClass         0 
      bDeviceProtocol         0 
      bMaxPacketSize0        64
      bNumConfigurations      1
    Device Status:     0x0001
      Self Powered
    
    Bus 002 Device 002: ID 4971:ce07 SimpleTech 
    Device Descriptor:
      bLength                18
      bDescriptorType         1
      bcdUSB               2.00
      bDeviceClass            0 (Defined at Interface level)
      bDeviceSubClass         0 
      bDeviceProtocol         0 
      bMaxPacketSize0        64
      idVendor           0x4971 SimpleTech
      idProduct          0xce07 
      bcdDevice            8.59
      iManufacturer           1 STECH   
      iProduct                2 Simple Drive    
      iSerial                 3 0010101640000000o
      bNumConfigurations      1
      Configuration Descriptor:
        bLength                 9
        bDescriptorType         2
        wTotalLength           32
        bNumInterfaces          1
        bConfigurationValue     1
        iConfiguration          0 
        bmAttributes         0xc0
          Self Powered
        MaxPower                2mA
        Interface Descriptor:
          bLength                 9
          bDescriptorType         4
          bInterfaceNumber        0
          bAlternateSetting       0
          bNumEndpoints           2
          bInterfaceClass         8 Mass Storage
          bInterfaceSubClass      6 SCSI
          bInterfaceProtocol     80 Bulk (Zip)
          iInterface              0 
          Endpoint Descriptor:
            bLength                 7
            bDescriptorType         5
            bEndpointAddress     0x81  EP 1 IN
            bmAttributes            2
              Transfer Type            Bulk
              Synch Type               None
              Usage Type               Data
            wMaxPacketSize     0x0200  1x 512 bytes
            bInterval               0
          Endpoint Descriptor:
            bLength                 7
            bDescriptorType         5
            bEndpointAddress     0x02  EP 2 OUT
            bmAttributes            2
              Transfer Type            Bulk
              Synch Type               None
              Usage Type               Data
            wMaxPacketSize     0x0200  1x 512 bytes
            bInterval               0
    Device Qualifier (for other device speed):
      bLength                10
      bDescriptorType         6
      bcdUSB               2.00
      bDeviceClass            0 (Defined at Interface level)
      bDeviceSubClass         0 
      bDeviceProtocol         0 
      bMaxPacketSize0        64
      bNumConfigurations      1
    Device Status:     0x0001
      Self Powered
    
    Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Device Descriptor:
      bLength                18
      bDescriptorType         1
      bcdUSB               2.00
      bDeviceClass            9 Hub
      bDeviceSubClass         0 Unused
      bDeviceProtocol         0 Full speed (or root) hub
      bMaxPacketSize0        64
      idVendor           0x1d6b Linux Foundation
      idProduct          0x0002 2.0 root hub
      bcdDevice            2.06
      iManufacturer           3 Linux 2.6.38-8-generic ehci_hcd
      iProduct                2 EHCI Host Controller
      iSerial                 1 0000:02:01.2
      bNumConfigurations      1
      Configuration Descriptor:
        bLength                 9
        bDescriptorType         2
        wTotalLength           25
        bNumInterfaces          1
        bConfigurationValue     1
        iConfiguration          0 
        bmAttributes         0xe0
          Self Powered
          Remote Wakeup
        MaxPower                0mA
        Interface Descriptor:
          bLength                 9
          bDescriptorType         4
          bInterfaceNumber        0
          bAlternateSetting       0
          bNumEndpoints           1
          bInterfaceClass         9 Hub
          bInterfaceSubClass      0 Unused
          bInterfaceProtocol      0 Full speed (or root) hub
          iInterface              0 
          Endpoint Descriptor:
            bLength                 7
            bDescriptorType         5
            bEndpointAddress     0x81  EP 1 IN
            bmAttributes            3
              Transfer Type            Interrupt
              Synch Type               None
              Usage Type               Data
            wMaxPacketSize     0x0004  1x 4 bytes
            bInterval              12
    Hub Descriptor:
      bLength               9
      bDescriptorType      41
      nNbrPorts             5
      wHubCharacteristic 0x0009
        Per-port power switching
        Per-port overcurrent protection
      bPwrOn2PwrGood       10 * 2 milli seconds
      bHubContrCurrent      0 milli Ampere
      DeviceRemovable    0x00
      PortPwrCtrlMask    0xff
     Hub Port Status:
       Port 1: 0000.0503 highspeed power enable connect
       Port 2: 0000.0503 highspeed power enable connect
       Port 3: 0000.0100 power
       Port 4: 0000.0100 power
       Port 5: 0000.0100 power
    Device Status:     0x0003
      Self Powered
      Remote Wakeup Enabled
    
    Bus 001 Device 003: ID 0846:9011 NetGear, Inc. WNDA3100(v2) 802.11n
    Device Descriptor:
      bLength                18
      bDescriptorType         1
      bcdUSB               2.00
      bDeviceClass          255 Vendor Specific Class
      bDeviceSubClass         0 
      bDeviceProtocol         0 
      bMaxPacketSize0        64
      idVendor           0x0846 NetGear, Inc.
      idProduct          0x9011 WNDA3100(v2) 802.11n
      bcdDevice            0.01
      iManufacturer           1 Broadcom
      iProduct                2 Remote Download Wireless Adapter
      iSerial                 3 
      bNumConfigurations      1
      Configuration Descriptor:
        bLength                 9
        bDescriptorType         2
        wTotalLength           39
        bNumInterfaces          1
        bConfigurationValue     1
        iConfiguration          0 
        bmAttributes         0xa0
          (Bus Powered)
          Remote Wakeup
        MaxPower              200mA
        Interface Descriptor:
          bLength                 9
          bDescriptorType         4
          bInterfaceNumber        0
          bAlternateSetting       0
          bNumEndpoints           3
          bInterfaceClass       255 Vendor Specific Class
          bInterfaceSubClass      2 
          bInterfaceProtocol    255 
          iInterface              0 
          Endpoint Descriptor:
            bLength                 7
            bDescriptorType         5
            bEndpointAddress     0x81  EP 1 IN
            bmAttributes            3
              Transfer Type            Interrupt
              Synch Type               None
              Usage Type               Data
            wMaxPacketSize     0x0010  1x 16 bytes
            bInterval               4
          Endpoint Descriptor:
            bLength                 7
            bDescriptorType         5
            bEndpointAddress     0x82  EP 2 IN
            bmAttributes            2
              Transfer Type            Bulk
              Synch Type               None
              Usage Type               Data
            wMaxPacketSize     0x0200  1x 512 bytes
            bInterval               0
          Endpoint Descriptor:
            bLength                 7
            bDescriptorType         5
            bEndpointAddress     0x03  EP 3 OUT
            bmAttributes            2
              Transfer Type            Bulk
              Synch Type               None
              Usage Type               Data
            wMaxPacketSize     0x0200  1x 512 bytes
            bInterval               1
    Device Qualifier (for other device speed):
      bLength                10
      bDescriptorType         6
      bcdUSB               1.10
      bDeviceClass          255 Vendor Specific Class
      bDeviceSubClass         0 
      bDeviceProtocol         0 
      bMaxPacketSize0        64
      bNumConfigurations      1
    can't get debug descriptor: Connection timed out
    Device Status:     0x0000
      (Bus Powered)
    
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Device Descriptor:
      bLength                18
      bDescriptorType         1
      bcdUSB               2.00
      bDeviceClass            9 Hub
      bDeviceSubClass         0 Unused
      bDeviceProtocol         0 Full speed (or root) hub
      bMaxPacketSize0        64
      idVendor           0x1d6b Linux Foundation
      idProduct          0x0002 2.0 root hub
      bcdDevice            2.06
      iManufacturer           3 Linux 2.6.38-8-generic ehci_hcd
      iProduct                2 EHCI Host Controller
      iSerial                 1 0000:00:1d.7
      bNumConfigurations      1
      Configuration Descriptor:
        bLength                 9
        bDescriptorType         2
        wTotalLength           25
        bNumInterfaces          1
        bConfigurationValue     1
        iConfiguration          0 
        bmAttributes         0xe0
          Self Powered
          Remote Wakeup
        MaxPower                0mA
        Interface Descriptor:
          bLength                 9
          bDescriptorType         4
          bInterfaceNumber        0
          bAlternateSetting       0
          bNumEndpoints           1
          bInterfaceClass         9 Hub
          bInterfaceSubClass      0 Unused
          bInterfaceProtocol      0 Full speed (or root) hub
          iInterface              0 
          Endpoint Descriptor:
            bLength                 7
            bDescriptorType         5
            bEndpointAddress     0x81  EP 1 IN
            bmAttributes            3
              Transfer Type            Interrupt
              Synch Type               None
              Usage Type               Data
            wMaxPacketSize     0x0004  1x 4 bytes
            bInterval              12
    Hub Descriptor:
      bLength              11
      bDescriptorType      41
      nNbrPorts             8
      wHubCharacteristic 0x000a
        No power switching (usb 1.0)
        Per-port overcurrent protection
      bPwrOn2PwrGood       10 * 2 milli seconds
      bHubContrCurrent      0 milli Ampere
      DeviceRemovable    0x00 0x00
      PortPwrCtrlMask    0xff 0xff
     Hub Port Status:
       Port 1: 0000.0100 power
       Port 2: 0000.0100 power
       Port 3: 0000.0100 power
       Port 4: 0000.0100 power
       Port 5: 0000.0100 power
       Port 6: 0000.0100 power
       Port 7: 0000.0100 power
       Port 8: 0000.0503 highspeed power enable connect
    Device Status:     0x0003
      Self Powered
      Remote Wakeup Enabled
    dave@dave-Dimension-4600i:~$
    I see my usb wireless adapter there, but it is not working.
    Please help.

  2. #2
    Join Date
    Apr 2009
    Location
    Florida USA
    Beans
    66
    Distro
    Ubuntu 11.10 Oneiric Ocelot

    Re: n600 wireless dual band usb adapter not working

    REALLY!?!?!?
    No Responses!?!?!?!

  3. #3
    Join Date
    Feb 2011
    Location
    new york state
    Beans
    Hidden!
    Distro
    Ubuntu Development Release

    Re: n600 wireless dual band usb adapter not working

    I will and try to help
    could I see a

    Code:
    sudo lshw -C network
    and a
    Code:
    rfkill list all
    and a
    Code:
    lsmod
    thanks
    Power tends to corrupt, and absolute power corrupts absolutely. Great men are almost always bad men, even when they exercise influence and not authority

  4. #4
    Join Date
    Apr 2009
    Location
    Florida USA
    Beans
    66
    Distro
    Ubuntu 11.10 Oneiric Ocelot

    Re: n600 wireless dual band usb adapter not working

    Code:
    sudo lshw -C network
    Code:
     *-network               
           description: Ethernet interface
           product: 82562EZ 10/100 Ethernet Controller
           vendor: Intel Corporation
           physical id: 8
           bus info: pci@0000:02:08.0
           logical name: eth0
           version: 02
           serial: 00:11:11:29:f1:a5
           size: 100Mbit/s
           capacity: 100Mbit/s
           width: 32 bits
           clock: 33MHz
           capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
           configuration: autonegotiation=on broadcast=yes driver=e100 driverversion=3.5.24-k2-NAPI duplex=full firmware=N/A ip=192.168.0.10 latency=64 link=yes maxlatency=56 mingnt=8 multicast=yes port=MII speed=100Mbit/s
           resources: irq:20 memory:fbfff000-fbffffff ioport:df40(size=64)
    dave@dave-Dimension-4600i:~$
    Code:
    rfkill list all
    Code:
    nothing shows up
    Code:
    lsmod
    Code:
    Module                  Size  Used by
    vesafb                 13449  1 
    nvidia               9766978  38 
    snd_intel8x0           33213  2 
    snd_ac97_codec        105614  1 snd_intel8x0
    ac97_bus               12642  1 snd_ac97_codec
    snd_pcm                80244  2 snd_intel8x0,snd_ac97_codec
    snd_seq_midi           13132  0 
    binfmt_misc            13213  1 
    snd_rawmidi            25269  1 snd_seq_midi
    snd_seq_midi_event     14475  1 snd_seq_midi
    snd_seq                51291  2 snd_seq_midi,snd_seq_midi_event
    ppdev                  12849  0 
    snd_timer              28659  2 snd_pcm,snd_seq
    snd_seq_device         14110  3 snd_seq_midi,snd_rawmidi,snd_seq
    usblp                  17827  0 
    ndiswrapper           192828  0 
    dcdbas                 14054  0 
    snd                    55295  11 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
    psmouse                73312  0 
    soundcore              12600  1 snd
    serio_raw              12990  0 
    parport_pc             32111  1 
    snd_page_alloc         14073  2 snd_intel8x0,snd_pcm
    joydev                 17322  0 
    shpchp                 32345  0 
    lp                     13349  0 
    parport                36746  3 ppdev,parport_pc,lp
    usbhid                 41704  0 
    usb_storage            43946  2 
    hid                    77084  1 usbhid
    uas                    17676  0 
    e100                   40108  0 
    floppy                 60032  0 
    dave@dave-Dimension-4600i:~$
    There it is
    Thanks josephmills

  5. #5
    Join Date
    Feb 2011
    Location
    new york state
    Beans
    Hidden!
    Distro
    Ubuntu Development Release

    Re: n600 wireless dual band usb adapter not working

    try this http://ubuntuforums.org/showthread.php?t=1383708

    hope it helps might be to old though
    Power tends to corrupt, and absolute power corrupts absolutely. Great men are almost always bad men, even when they exercise influence and not authority

  6. #6
    Join Date
    Apr 2009
    Location
    Florida USA
    Beans
    66
    Distro
    Ubuntu 11.10 Oneiric Ocelot

    Re: n600 wireless dual band usb adapter not working

    I have followed the steps but have hit a brick wall here:
    Use Wine to browse that C:\ drive and you will find a folder WNDA3100v2. Inside that folder is a folder- Driver and in that WinXP200. There you will find a file bcmwlhigh5.inf. That is the prize you have been looking for.
    I can not find the C:/ folder.
    and here:
    Then at the top of your screen, go to System/Administration/Windows Wireless Drivers (install it if you don't have it). Then click install new driver and use Windows Wireless Drivers to browse to the .inf file, click install. That's it, you should be good to go.
    This "top of screen menu" does not have these options, i am using the latest Ubuntu
    Please help on how to do this.

  7. #7
    Join Date
    Feb 2011
    Location
    new york state
    Beans
    Hidden!
    Distro
    Ubuntu Development Release

    Re: n600 wireless dual band usb adapter not working

    let us see a
    Code:
    uname -a
    thanks
    Power tends to corrupt, and absolute power corrupts absolutely. Great men are almost always bad men, even when they exercise influence and not authority

  8. #8
    Join Date
    Aug 2005
    Location
    South Carolina, USA
    Beans
    20,420
    Distro
    Ubuntu 14.10 Utopic Unicorn

    Re: n600 wireless dual band usb adapter not working

    Joseph--

    I hope this may be helpful.
    Attached Files Attached Files
    "Oh, Ubuntu, you are my favorite Linux-based operating system" --Dr. Sheldon Cooper, Ph.D.

  9. #9
    Join Date
    Apr 2009
    Location
    Florida USA
    Beans
    66
    Distro
    Ubuntu 11.10 Oneiric Ocelot

    Re: n600 wireless dual band usb adapter not working

    Code:
    uname -a
    gave this

    Code:
    root@dave-Dimension-4600i:/home/dave# uname -a
    Linux dave-Dimension-4600i 2.6.38-8-generic #42-Ubuntu SMP Mon Apr 11 03:31:50 UTC 2011 i686 i686 i386 GNU/Linux
    root@dave-Dimension-4600i:/home/dave#

  10. #10
    Join Date
    Apr 2009
    Location
    Florida USA
    Beans
    66
    Distro
    Ubuntu 11.10 Oneiric Ocelot

    Solved !Re: n600 wireless dual band usb adapter not working

    :ks

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •