I have got this usb modem from a windows user.
he told he lost its driver cd so i took it for using it on my ubuntu 11.04.
but It was not detected in network manager.but ubuntu detects it.
>>
Code:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 007: ID 0471:1234 Philips (or NXP)
Bus 004 Device 006: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
one of them is my bluetooth dongle. another is that modem.
So i tried wvdial. but could not connect.
my /etc/wvdial.conf configuration is
Code:
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = AT+CGDCONT=1,"IP","gpinternet"
Modem Type = USB Modem
Baud = 230400
New PPPD = yes
Modem = /dev/ttyACM0
ISDN = 0
Phone = *99***1#
Username =xyz
Password =xyz
but when i type sudo wvdial, output is
Code:
--> WvDial: Internet dialer version 1.61
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
+CME ERROR: 3
--> Bad init string.
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
+CME ERROR: 3
--> Bad init string.
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
+CME ERROR: 3
--> Bad init string.
I also tried sakis3g. but did not get any result. now how can i connect this modem. I don't have that driver cd. so i can't test it in any windows pc to make sure that it is physically damaged. tx
Bookmarks