Page 11 of 25 FirstFirst ... 91011121321 ... LastLast
Results 101 to 110 of 242

Thread: Natty Narwhal on Lenovo ThinkPad X220T

  1. #101
    Join Date
    Sep 2006
    Beans
    112

    Re: Natty Narwhal on Lenovo ThinkPad X220T

    Code:
    @x220t:~/Desktop/magick-rotation$ xrandr -q --verbose
    Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192
    LVDS1 connected 1366x768+0+0 (0x49) normal (normal left inverted right x axis y axis) 277mm x 156mm
    	Identifier: 0x41
    	Timestamp:  10549034
    	Subpixel:   horizontal rgb
    	Gamma:      1.0:1.0:1.0
    	Brightness: 1.0
    	Clones:    
    	CRTC:       0
    	CRTCs:      0 1
    	Transform:  1.000000 0.000000 0.000000
    	            0.000000 1.000000 0.000000
    	            0.000000 0.000000 1.000000
    	           filter: 
    	EDID:
    		00ffffffffffff0030e4d80200000000
    		00140103801c1078ead4e59559578b28
    		20505400000001010101010101010101
    		010101010101601d56d8500018303040
    		4700159c1000001b0000000000000000
    		00000000000000000000000000fe004c
    		4720446973706c61790a2020000000fe
    		004c503132355748322d534c42310084
    	BACKLIGHT: 7 (0x00000007)	range:  (0,15)
    	Backlight: 7 (0x00000007)	range:  (0,15)
    	scaling mode:	Full aspect
    		supported: None         Full         Center       Full aspect 
      1366x768 (0x49)   75.2MHz +HSync -VSync *current +preferred
            h: width  1366 start 1414 end 1478 total 1582 skew    0 clock   47.5KHz
            v: height  768 start  772 end  779 total  792           clock   60.0Hz
      1360x768 (0x4a)   84.8MHz -HSync +VSync
            h: width  1360 start 1432 end 1568 total 1776 skew    0 clock   47.7KHz
            v: height  768 start  771 end  781 total  798           clock   59.8Hz
      1360x768 (0x4b)   72.0MHz +HSync -VSync
            h: width  1360 start 1408 end 1440 total 1520 skew    0 clock   47.4KHz
            v: height  768 start  771 end  781 total  790           clock   60.0Hz
      1024x768 (0x4c)   65.0MHz -HSync -VSync
            h: width  1024 start 1048 end 1184 total 1344 skew    0 clock   48.4KHz
            v: height  768 start  771 end  777 total  806           clock   60.0Hz
      800x600 (0x4d)   40.0MHz +HSync +VSync
            h: width   800 start  840 end  968 total 1056 skew    0 clock   37.9KHz
            v: height  600 start  601 end  605 total  628           clock   60.3Hz
      800x600 (0x4e)   36.0MHz +HSync +VSync
            h: width   800 start  824 end  896 total 1024 skew    0 clock   35.2KHz
            v: height  600 start  601 end  603 total  625           clock   56.2Hz
      640x480 (0x4f)   25.2MHz -HSync -VSync
            h: width   640 start  656 end  752 total  800 skew    0 clock   31.5KHz
            v: height  480 start  490 end  492 total  525           clock   59.9Hz
    VGA1 disconnected (normal left inverted right x axis y axis)
    	Identifier: 0x42
    	Timestamp:  10549034
    	Subpixel:   unknown
    	Clones:    
    	CRTCs:      0 1
    	Transform:  1.000000 0.000000 0.000000
    	            0.000000 1.000000 0.000000
    	            0.000000 0.000000 1.000000
    	           filter: 
    HDMI1 disconnected (normal left inverted right x axis y axis)
    	Identifier: 0x43
    	Timestamp:  10549034
    	Subpixel:   unknown
    	Clones:    
    	CRTCs:      0 1
    	Transform:  1.000000 0.000000 0.000000
    	            0.000000 1.000000 0.000000
    	            0.000000 0.000000 1.000000
    	           filter: 
    	force_audio: 0 (0x00000000)	range:  (-1,1)
    DP1 disconnected (normal left inverted right x axis y axis)
    	Identifier: 0x44
    	Timestamp:  10549034
    	Subpixel:   unknown
    	Clones:    
    	CRTCs:      0 1
    	Transform:  1.000000 0.000000 0.000000
    	            0.000000 1.000000 0.000000
    	            0.000000 0.000000 1.000000
    	           filter: 
    	force_audio: 0 (0x00000000)	range:  (-1,1)
    HDMI2 disconnected (normal left inverted right x axis y axis)
    	Identifier: 0x45
    	Timestamp:  10549034
    	Subpixel:   unknown
    	Clones:    
    	CRTCs:      0 1
    	Transform:  1.000000 0.000000 0.000000
    	            0.000000 1.000000 0.000000
    	            0.000000 0.000000 1.000000
    	           filter: 
    	force_audio: 0 (0x00000000)	range:  (-1,1)
    HDMI3 disconnected (normal left inverted right x axis y axis)
    	Identifier: 0x46
    	Timestamp:  10549034
    	Subpixel:   unknown
    	Clones:    
    	CRTCs:      0 1
    	Transform:  1.000000 0.000000 0.000000
    	            0.000000 1.000000 0.000000
    	            0.000000 0.000000 1.000000
    	           filter: 
    	force_audio: 0 (0x00000000)	range:  (-1,1)
    DP2 disconnected (normal left inverted right x axis y axis)
    	Identifier: 0x47
    	Timestamp:  10549034
    	Subpixel:   unknown
    	Clones:    
    	CRTCs:      0 1
    	Transform:  1.000000 0.000000 0.000000
    	            0.000000 1.000000 0.000000
    	            0.000000 0.000000 1.000000
    	           filter: 
    	force_audio: 0 (0x00000000)	range:  (-1,1)
    DP3 disconnected (normal left inverted right x axis y axis)
    	Identifier: 0x48
    	Timestamp:  10549034
    	Subpixel:   unknown
    	Clones:    
    	CRTCs:      0 1
    	Transform:  1.000000 0.000000 0.000000
    	            0.000000 1.000000 0.000000
    	            0.000000 0.000000 1.000000
    	           filter: 
    	force_audio: 0 (0x00000000)	range:  (-1,1)
    Response to the command below was "normal".
    Code:
    @x220t:~/Desktop/magick-rotation$ xrandr -q --verbose | grep 'connected' | egrep -o  '\) (normal|left|inverted|right) \(' | egrep -o '(normal|left|inverted|right)'
    normal

  2. #102
    Join Date
    Nov 2008
    Beans
    9,635
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: Natty Narwhal on Lenovo ThinkPad X220T

    Whew, that looks good too. When you're rotated left or ccw the long command should say left. So did you check if there was a checkmagic executable?

  3. #103
    Join Date
    Sep 2006
    Beans
    112

    Re: Natty Narwhal on Lenovo ThinkPad X220T

    Yes, I do see a checkmagic64 executable in the Magik Rotation folder. What might be stopping it from rotating then, when I flip to the tablet mode?

  4. #104
    Join Date
    Nov 2008
    Beans
    9,635
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: Natty Narwhal on Lenovo ThinkPad X220T

    Alright.

    Not sure. I don't see why it is complaining about an AttributeError at line 770. It seems like it should be populated. I'm guessing it has something to do with the CTM changes jayhawk made.

    What is your output of?
    Code:
    xinput list

  5. #105
    Join Date
    Sep 2006
    Beans
    112

    Re: Natty Narwhal on Lenovo ThinkPad X220T

    Quote Originally Posted by Favux View Post
    What is your output of?
    Code:
    xinput list
    It is:
    Code:
    @x220t:~/Desktop/magick-rotation$ xinput list
    ⎡ Virtual core pointer                    	id=2	[master pointer  (3)]
    ⎜   ↳ Virtual core XTEST pointer              	id=4	[slave  pointer  (2)]
    ⎜   ↳ SynPS/2 Synaptics TouchPad              	id=11	[slave  pointer  (2)]
    ⎜   ↳ ISD-V4 Finger touch                     	id=13	[slave  pointer  (2)]
    ⎜   ↳ ISD-V4 Pen stylus                       	id=14	[slave  pointer  (2)]
    ⎜   ↳ ISD-V4 Pen eraser                       	id=15	[slave  pointer  (2)]
    ⎜   ↳ TPPS/2 IBM TrackPoint                   	id=16	[slave  pointer  (2)]
    ⎣ Virtual core keyboard                   	id=3	[master keyboard (2)]
        ↳ Virtual core XTEST keyboard             	id=5	[slave  keyboard (3)]
        ↳ Power Button                            	id=6	[slave  keyboard (3)]
        ↳ Video Bus                               	id=7	[slave  keyboard (3)]
        ↳ Sleep Button                            	id=8	[slave  keyboard (3)]
        ↳ Integrated Camera                       	id=9	[slave  keyboard (3)]
        ↳ AT Translated Set 2 keyboard            	id=10	[slave  keyboard (3)]
        ↳ ThinkPad Extra Buttons                  	id=12	[slave  keyboard (3)]

  6. #106
    Join Date
    Nov 2008
    Beans
    9,635
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: Natty Narwhal on Lenovo ThinkPad X220T

    Alright then touch is on the Wacom X driver too since touch is appended to Finger. That shoots that idea down.

    I don't understand why Magick Rotation 1.4 is working on my usb tablet PC with touch and other X220t's but not some X220t's.

    We'll need jayhawk aka Ayuthia to figure this out it looks like. I'll see if he has some time.

  7. #107
    Join Date
    Sep 2006
    Beans
    112

    Re: Natty Narwhal on Lenovo ThinkPad X220T

    Thanks. I will wait.

  8. #108
    Join Date
    Apr 2007
    Location
    Mount Horeb, WI
    Beans
    4,312
    Distro
    Kubuntu Development Release

    Re: Natty Narwhal on Lenovo ThinkPad X220T

    Quote Originally Posted by maxxum View Post
    Thanks. I will wait.
    I think that this link has the solution to the error that you are getting for xrotate.py. Please replace the current file with the one in this link. There was an issue with the script not accepting LVDS1 because of the number at the end.

    Please let us know if it helps.

  9. #109
    Join Date
    Sep 2006
    Beans
    112

    Re: Natty Narwhal on Lenovo ThinkPad X220T

    hi,
    I renamed the original xrotate.py to xrotate-orig.py and put the new file in the folder and rebooted. Still nothing happens when the hinge is rotated to the tablet mode.
    Am I making a stupid mistake of not knowing to make one of the scripts executable? or are they supposed to work just like that?

  10. #110
    Join Date
    Apr 2007
    Location
    Mount Horeb, WI
    Beans
    4,312
    Distro
    Kubuntu Development Release

    Re: Natty Narwhal on Lenovo ThinkPad X220T

    Quote Originally Posted by maxxum View Post
    hi,
    I renamed the original xrotate.py to xrotate-orig.py and put the new file in the folder and rebooted. Still nothing happens when the hinge is rotated to the tablet mode.
    Am I making a stupid mistake of not knowing to make one of the scripts executable? or are they supposed to work just like that?
    Is the xrotate.py script working from the Terminal? If it isn't, can you post the error message?

    It also sounds like we might be dealing with a couple of issues. One is with xrotate.py having an error when it is called and the other is with the tablet not rotating. Magick_rotation does auto rotate some tablets that have the wmi module but if I recall correctly, the ThinkPad has an acpi script that does it. I will need to look into that a little further.

Page 11 of 25 FirstFirst ... 91011121321 ... LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •