Page 11 of 14 FirstFirst ... 910111213 ... LastLast
Results 101 to 110 of 138

Thread: Mygica X8507

  1. #101
    Join Date
    Jun 2011
    Location
    Buenos Aires, Argentina
    Beans
    81
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: Mygica X8507

    Holas y ¡¡¡buenísimas!!! .
    Aunque no lo creas te vengo a mostrar lo siguiente:
    Code:
    # dmesg | grep 23885
    [    9.004595] cx23885 driver version 0.0.3 loaded
    [    9.008029] cx23885 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    [    9.008192] CORE cx23885[0]: subsystem: 14f1:8502, board: Mygica X8507 [card=33,autodetected]
    [    9.616963] cx25840 8-0044: cx23885 A/V decoder found @ 0x88 (cx23885[0])
    [   10.250784] cx25840 8-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes)
    [   10.387268] cx23885[0]: registered device video1 [v4l2]
    [   10.387287] cx23885[0]: registered device vbi0
    [   10.387366] cx23885[0]: registered ALSA audio device
    [   12.436886] cx23885_dvb_register() allocating 1 frontend(s)
    [   12.436889] cx23885[0]: cx23885 based dvb card
    [   12.453055] DVB: registering new adapter (cx23885[0])
    [   12.453279] cx23885_dev_checkrevision() Hardware revision = 0xb0
    [   12.453283] cx23885[0]/0: found at 0000:03:00.0, rev: 2, irq: 19, latency: 0, mmio: 0xfd400000
    [   12.453290] cx23885 0000:03:00.0: setting latency timer to 64
    # dmesg | grep xc5000
    [   10.386519] xc5000 7-0061: creating new instance
    [   10.387205] xc5000: Successfully identified at address 0x61
    [   10.387206] xc5000: Firmware has not been loaded previously
    [   10.392712] xc5000: waiting for firmware upload (dvb-fe-xc5000-1.6.114.fw)...
    [   10.396406] xc5000: firmware read 12401 bytes.
    [   10.396408] xc5000: firmware uploading...
    [   11.764050] xc5000: firmware upload complete...
    [   12.452334] xc5000 7-0061: attaching existing instance
    [   12.453051] xc5000: Successfully identified at address 0x61
    [   12.453052] xc5000: Firmware has been loaded previously
    Sabía que tenía que pasar. Y ya con esto estoy muy satisfecho, porque me costó bastante llegar a eso.
    Ahora si no me equivoco, y revisando los mensajes de este tema, falta hacer algo.
    Acá estoy cuando quieras y tengas tiempo.
    Saludos y muchas gracias.

    Sergio

    P.D. Te mando el Dmesg completo por las dudas:
    Code:
    [    0.000000] Initializing cgroup subsys cpuset
    [    0.000000] Initializing cgroup subsys cpu
    [    0.000000] Linux version 3.0.0-13-generic (buildd@crested) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #22-Ubuntu SMP Wed Nov 2 13:27:26 UTC 2011 (Ubuntu 3.0.0-13.22-generic 3.0.6)
    [    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-13-generic root=UUID=279eaa22-1f20-497d-9f55-056e86d03c14 ro quiet splash vt.handoff=7
    [    0.000000] KERNEL supported cpus:
    [    0.000000]   Intel GenuineIntel
    [    0.000000]   AMD AuthenticAMD
    [    0.000000]   Centaur CentaurHauls
    [    0.000000] BIOS-provided physical RAM map:
    [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    [    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    [    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    [    0.000000]  BIOS-e820: 0000000000100000 - 00000000cfdf0000 (usable)
    [    0.000000]  BIOS-e820: 00000000cfdf0000 - 00000000cfdf1000 (ACPI NVS)
    [    0.000000]  BIOS-e820: 00000000cfdf1000 - 00000000cfe00000 (ACPI data)
    [    0.000000]  BIOS-e820: 00000000cfe00000 - 00000000cff00000 (reserved)
    [    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
    [    0.000000]  BIOS-e820: 0000000100000000 - 0000000110000000 (usable)
    [    0.000000] NX (Execute Disable) protection: active
    [    0.000000] DMI 2.4 present.
    [    0.000000] DMI: Gigabyte Technology Co., Ltd. GA-890GPA-UD3H/GA-890GPA-UD3H, BIOS FF 11/24/2010
    [    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [    0.000000] No AGP bridge found
    [    0.000000] last_pfn = 0x110000 max_arch_pfn = 0x400000000
    [    0.000000] MTRR default type: uncachable
    [    0.000000] MTRR fixed ranges enabled:
    [    0.000000]   00000-9FFFF write-back
    [    0.000000]   A0000-BFFFF uncachable
    [    0.000000]   C0000-C7FFF write-protect
    [    0.000000]   C8000-FFFFF uncachable
    [    0.000000] MTRR variable ranges enabled:
    [    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
    [    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
    [    0.000000]   2 base 0000C0000000 mask FFFFF0000000 write-back
    [    0.000000]   3 base 0000CFE00000 mask FFFFFFE00000 uncachable
    [    0.000000]   4 base 000100000000 mask FFFFF0000000 write-back
    [    0.000000]   5 disabled
    [    0.000000]   6 disabled
    [    0.000000]   7 disabled
    [    0.000000] TOM2: 0000000130000000 aka 4864M
    [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [    0.000000] original variable MTRRs
    [    0.000000] reg 0, base: 0GB, range: 2GB, type WB
    [    0.000000] reg 1, base: 2GB, range: 1GB, type WB
    [    0.000000] reg 2, base: 3GB, range: 256MB, type WB
    [    0.000000] reg 3, base: 3326MB, range: 2MB, type UC
    [    0.000000] reg 4, base: 4GB, range: 256MB, type WB
    [    0.000000] total RAM covered: 3326M
    [    0.000000] Found optimal setting for mtrr clean up
    [    0.000000]  gran_size: 64K     chunk_size: 4M     num_reg: 4      lose cover RAM: 0G
    [    0.000000] New variable MTRRs
    [    0.000000] reg 0, base: 0GB, range: 2GB, type WB
    [    0.000000] reg 1, base: 2GB, range: 1GB, type WB
    [    0.000000] reg 2, base: 3GB, range: 256MB, type WB
    [    0.000000] reg 3, base: 3326MB, range: 2MB, type UC
    [    0.000000] e820 update range: 00000000cfe00000 - 0000000100000000 (usable) ==> (reserved)
    [    0.000000] last_pfn = 0xcfdf0 max_arch_pfn = 0x400000000
    [    0.000000] found SMP MP-table at [ffff8800000f44e0] f44e0
    [    0.000000] initial memory mapped : 0 - 20000000
    [    0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
    [    0.000000] Using GB pages for direct mapping
    [    0.000000] init_memory_mapping: 0000000000000000-00000000cfdf0000
    [    0.000000]  0000000000 - 00c0000000 page 1G
    [    0.000000]  00c0000000 - 00cfc00000 page 2M
    [    0.000000]  00cfc00000 - 00cfdf0000 page 4k
    [    0.000000] kernel direct mapping tables up to cfdf0000 @ cfded000-cfdf0000
    [    0.000000] init_memory_mapping: 0000000100000000-0000000110000000
    [    0.000000]  0100000000 - 0110000000 page 2M
    [    0.000000] kernel direct mapping tables up to 110000000 @ 10fffe000-110000000
    [    0.000000] RAMDISK: 359e8000 - 36cec000
    [    0.000000] ACPI: RSDP 00000000000f5e80 00014 (v00 GBT   )
    [    0.000000] ACPI: RSDT 00000000cfdf1000 00040 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
    [    0.000000] ACPI: FACP 00000000cfdf1080 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
    [    0.000000] ACPI: DSDT 00000000cfdf1100 076BC (v01 GBT    GBTUACPI 00001000 MSFT 03000000)
    [    0.000000] ACPI: FACS 00000000cfdf0000 00040
    [    0.000000] ACPI: SSDT 00000000cfdf8880 0088C (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
    [    0.000000] ACPI: HPET 00000000cfdf9140 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
    [    0.000000] ACPI: MCFG 00000000cfdf9180 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
    [    0.000000] ACPI: MATS 00000000cfdf91c0 00034 (v01 GBT             00000000      00000000)
    [    0.000000] ACPI: TAMG 00000000cfdf9230 00202 (v01 GBT    GBT   B0 5455312E BG?? 53450101)
    [    0.000000] ACPI: APIC 00000000cfdf87c0 000BC (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] Scanning NUMA topology in Northbridge 24
    [    0.000000] No NUMA configuration found
    [    0.000000] Faking a node at 0000000000000000-0000000110000000
    [    0.000000] Initmem setup node 0 0000000000000000-0000000110000000
    [    0.000000]   NODE_DATA [000000010fff9000 - 000000010fffdfff]
    [    0.000000]  [ffffea0000000000-ffffea0003bfffff] PMD -> [ffff88010be00000-ffff88010effffff] on node 0
    [    0.000000] Zone PFN ranges:
    [    0.000000]   DMA      0x00000010 -> 0x00001000
    [    0.000000]   DMA32    0x00001000 -> 0x00100000
    [    0.000000]   Normal   0x00100000 -> 0x00110000
    [    0.000000] Movable zone start PFN for each node
    [    0.000000] early_node_map[3] active PFN ranges
    [    0.000000]     0: 0x00000010 -> 0x0000009f
    [    0.000000]     0: 0x00000100 -> 0x000cfdf0
    [    0.000000]     0: 0x00100000 -> 0x00110000
    [    0.000000] On node 0 totalpages: 916863
    [    0.000000]   DMA zone: 56 pages used for memmap
    [    0.000000]   DMA zone: 5 pages reserved
    [    0.000000]   DMA zone: 3922 pages, LIFO batch:0
    [    0.000000]   DMA32 zone: 14280 pages used for memmap
    [    0.000000]   DMA32 zone: 833064 pages, LIFO batch:31
    [    0.000000]   Normal zone: 896 pages used for memmap
    [    0.000000]   Normal zone: 64640 pages, LIFO batch:15
    [    0.000000] ACPI: PM-Timer IO Port: 0x4008
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
    [    0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
    [    0.000000] IOAPIC[0]: apic_id 8, version 33, address 0xfec00000, GSI 0-23
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    [    0.000000] ACPI: IRQ0 used by override.
    [    0.000000] ACPI: IRQ2 used by override.
    [    0.000000] ACPI: IRQ9 used by override.
    [    0.000000] Using ACPI (MADT) for SMP configuration information
    [    0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
    [    0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
    [    0.000000] nr_irqs_gsi: 40
    [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
    [    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
    [    0.000000] PM: Registered nosave memory: 00000000cfdf0000 - 00000000cfdf1000
    [    0.000000] PM: Registered nosave memory: 00000000cfdf1000 - 00000000cfe00000
    [    0.000000] PM: Registered nosave memory: 00000000cfe00000 - 00000000cff00000
    [    0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000
    [    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
    [    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
    [    0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
    [    0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:10100000)
    [    0.000000] Booting paravirtualized kernel on bare hardware
    [    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
    [    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88010fc00000 s79616 r8192 d22784 u262144
    [    0.000000] pcpu-alloc: s79616 r8192 d22784 u262144 alloc=1*2097152
    [    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
    [    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 901626
    [    0.000000] Policy zone: Normal
    [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-13-generic root=UUID=279eaa22-1f20-497d-9f55-056e86d03c14 ro quiet splash vt.handoff=7
    [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [    0.000000] Checking aperture...
    [    0.000000] No AGP bridge found
    [    0.000000] Node 0: aperture @ c4000000 size 32 MB
    [    0.000000] Aperture pointing to e820 RAM. Ignoring.
    [    0.000000] Your BIOS doesn't leave a aperture memory hole
    [    0.000000] Please enable the IOMMU option in the BIOS setup
    [    0.000000] This costs you 64 MB of RAM
    [    0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
    [    0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
    [    0.000000] Memory: 3450848k/4456448k available (6105k kernel code, 788996k absent, 216604k reserved, 4879k data, 984k init)
    [    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [    0.000000] Hierarchical RCU implementation.
    [    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
    [    0.000000] NR_IRQS:16640 nr_irqs:744 16
    [    0.000000] spurious 8259A interrupt: IRQ7.
    [    0.000000] vt handoff: transparent VT on vt#7
    [    0.000000] Console: colour dummy device 80x25
    [    0.000000] console [tty0] enabled
    [    0.000000] allocated 29360128 bytes of page_cgroup
    [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [    0.000000] hpet clockevent registered
    [    0.000000] Fast TSC calibration using PIT
    [    0.000000] Detected 3213.593 MHz processor.
    [    0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 6427.18 BogoMIPS (lpj=12854372)
    [    0.004007] pid_max: default: 32768 minimum: 301
    [    0.004028] Security Framework initialized
    [    0.004039] AppArmor: AppArmor initialized
    [    0.004040] Yama: becoming mindful.
    [    0.004352] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [    0.005449] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [    0.005933] Mount-cache hash table entries: 256
    [    0.006032] Initializing cgroup subsys cpuacct
    [    0.006036] Initializing cgroup subsys memory
    [    0.006044] Initializing cgroup subsys devices
    [    0.006045] Initializing cgroup subsys freezer
    [    0.006047] Initializing cgroup subsys net_cls
    [    0.006048] Initializing cgroup subsys blkio
    [    0.006053] Initializing cgroup subsys perf_event
    [    0.006074] tseg: 00cff00000
    [    0.006075] CPU: Physical Processor ID: 0
    [    0.006076] CPU: Processor Core ID: 0
    [    0.006078] mce: CPU supports 6 MCE banks
    [    0.006086] using AMD E400 aware idle routine
    [    0.007172] ACPI: Core revision 20110413
    [    0.012030] ftrace: allocating 25656 entries in 101 pages
    [    0.020259] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [    0.059940] CPU0: AMD Phenom(tm) II X4 955 Processor stepping 03
    [    0.060003] Performance Events: AMD PMU driver.
    [    0.060003] ... version:                0
    [    0.060003] ... bit width:              48
    [    0.060003] ... generic registers:      4
    [    0.060003] ... value mask:             0000ffffffffffff
    [    0.060003] ... max period:             00007fffffffffff
    [    0.060003] ... fixed-purpose events:   0
    [    0.060003] ... event mask:             000000000000000f
    [    0.060003] Booting Node   0, Processors  #1
    [    0.060003] smpboot cpu 1: start_ip = 9a000
    [    0.148020] System has AMD C1E enabled
    [    0.148032] Switch to broadcast mode on CPU1
    [    0.148060]  #2
    [    0.148061] smpboot cpu 2: start_ip = 9a000
    [    0.240027] Switch to broadcast mode on CPU2
    [    0.240067]  #3
    [    0.240068] smpboot cpu 3: start_ip = 9a000
    [    0.332034] Brought up 4 CPUs
    [    0.332036] Total of 4 processors activated (25711.78 BogoMIPS).
    [    0.332033] Switch to broadcast mode on CPU3
    [    0.334416] Switch to broadcast mode on CPU0
    [    0.334416] devtmpfs: initialized
    [    0.334416] PM: Registering ACPI NVS region at cfdf0000 (4096 bytes)
    [    0.334416] print_constraints: dummy: 
    [    0.334416] Time: 13:54:50  Date: 11/27/11
    [    0.334416] NET: Registered protocol family 16
    [    0.334416] node 0 link 0: io port [9000, ffff]
    [    0.334416] TOM: 00000000d0000000 aka 3328M
    [    0.334416] Fam 10h mmconf [e0000000, e00fffff]
    [    0.334416] node 0 link 0: mmio [a0000, bffff]
    [    0.334416] node 0 link 0: mmio [d0000000, dfffffff]
    [    0.334416] node 0 link 0: mmio [f0000000, fe02ffff]
    [    0.334416] node 0 link 0: mmio [e0000000, e06fffff] ==> [e0100000, e06fffff]
    [    0.334416] TOM2: 0000000130000000 aka 4864M
    [    0.334416] bus: [00, 06] on node 0 link 0
    [    0.334416] bus: 00 index 0 [io  0x0000-0xffff]
    [    0.334416] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
    [    0.334416] bus: 00 index 2 [mem 0xd0000000-0xdfffffff]
    [    0.334416] bus: 00 index 3 [mem 0xe0700000-0xffffffff]
    [    0.334416] bus: 00 index 4 [mem 0xe0100000-0xe06fffff]
    [    0.334416] bus: 00 index 5 [mem 0x130000000-0xfcffffffff]
    [    0.334416] Extended Config Space enabled on 1 nodes
    [    0.334416] ACPI: bus type pci registered
    [    0.334416] Trying to unpack rootfs image as initramfs...
    [    0.334416] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [    0.334416] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [    0.352265] PCI: Using configuration type 1 for base access
    [    0.352699] bio: create slab <bio-0> at 0
    [    0.352699] ACPI: EC: Look up EC in DSDT
    [    0.357438] ACPI Warning: Incorrect checksum in table [TAMG] - 0x45, should be 0x44 (20110413/tbutils-314)
    [    0.357530] ACPI: Interpreter enabled
    [    0.357533] ACPI: (supports S0 S3 S4 S5)
    [    0.357546] ACPI: Using IOAPIC for interrupt routing
    [    0.505541] ACPI: No dock devices found.
    [    0.505544] HEST: Table not found.
    [    0.505546] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [    0.505590] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [    0.505666] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
    [    0.505668] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
    [    0.505669] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
    [    0.505671] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
    [    0.505673] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xfebfffff]
    [    0.505684] pci 0000:00:00.0: [1022:9601] type 0 class 0x000600
    [    0.505694] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
    [    0.505721] pci 0000:00:01.0: [1022:9602] type 1 class 0x000604
    [    0.505747] pci 0000:00:05.0: [1022:9605] type 1 class 0x000604
    [    0.505768] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
    [    0.505770] pci 0000:00:05.0: PME# disabled
    [    0.505782] pci 0000:00:07.0: [1022:9607] type 1 class 0x000604
    [    0.505802] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
    [    0.505804] pci 0000:00:07.0: PME# disabled
    [    0.505815] pci 0000:00:0a.0: [1022:9609] type 1 class 0x000604
    [    0.505836] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
    [    0.505838] pci 0000:00:0a.0: PME# disabled
    [    0.505861] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101
    [    0.505877] pci 0000:00:11.0: reg 10: [io  0xff00-0xff07]
    [    0.505884] pci 0000:00:11.0: reg 14: [io  0xfe00-0xfe03]
    [    0.505890] pci 0000:00:11.0: reg 18: [io  0xfd00-0xfd07]
    [    0.505897] pci 0000:00:11.0: reg 1c: [io  0xfc00-0xfc03]
    [    0.505904] pci 0000:00:11.0: reg 20: [io  0xfb00-0xfb0f]
    [    0.505911] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
    [    0.505926] pci 0000:00:11.0: set SATA to AHCI mode
    [    0.505958] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
    [    0.505967] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
    [    0.506017] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
    [    0.506030] pci 0000:00:12.2: reg 10: [mem 0xfe02d000-0xfe02d0ff]
    [    0.506080] pci 0000:00:12.2: supports D1 D2
    [    0.506081] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
    [    0.506084] pci 0000:00:12.2: PME# disabled
    [    0.506099] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
    [    0.506109] pci 0000:00:13.0: reg 10: [mem 0xfe02c000-0xfe02cfff]
    [    0.506158] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
    [    0.506172] pci 0000:00:13.2: reg 10: [mem 0xfe02b000-0xfe02b0ff]
    [    0.506221] pci 0000:00:13.2: supports D1 D2
    [    0.506222] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
    [    0.506225] pci 0000:00:13.2: PME# disabled
    [    0.506240] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
    [    0.506290] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
    [    0.506300] pci 0000:00:14.1: reg 10: [io  0x0000-0x0007]
    [    0.506307] pci 0000:00:14.1: reg 14: [io  0x0000-0x0003]
    [    0.506314] pci 0000:00:14.1: reg 18: [io  0x0000-0x0007]
    [    0.506321] pci 0000:00:14.1: reg 1c: [io  0x0000-0x0003]
    [    0.506327] pci 0000:00:14.1: reg 20: [io  0xfa00-0xfa0f]
    [    0.506353] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
    [    0.506368] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
    [    0.506409] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    [    0.506412] pci 0000:00:14.2: PME# disabled
    [    0.506423] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
    [    0.506476] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
    [    0.506504] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
    [    0.506514] pci 0000:00:14.5: reg 10: [mem 0xfe02a000-0xfe02afff]
    [    0.506562] pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604
    [    0.506601] pci 0000:00:15.0: supports D1 D2
    [    0.506621] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
    [    0.506631] pci 0000:00:16.0: reg 10: [mem 0xfe029000-0xfe029fff]
    [    0.506680] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
    [    0.506694] pci 0000:00:16.2: reg 10: [mem 0xfe028000-0xfe0280ff]
    [    0.506743] pci 0000:00:16.2: supports D1 D2
    [    0.506744] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
    [    0.506747] pci 0000:00:16.2: PME# disabled
    [    0.506761] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
    [    0.506772] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
    [    0.506783] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
    [    0.506793] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
    [    0.506804] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
    [    0.506837] pci 0000:01:05.0: [1002:9714] type 0 class 0x000300
    [    0.506844] pci 0000:01:05.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
    [    0.506848] pci 0000:01:05.0: reg 14: [io  0xce00-0xceff]
    [    0.506851] pci 0000:01:05.0: reg 18: [mem 0xfdbe0000-0xfdbeffff]
    [    0.506859] pci 0000:01:05.0: reg 24: [mem 0xfda00000-0xfdafffff]
    [    0.506869] pci 0000:01:05.0: supports D1 D2
    [    0.506877] pci 0000:01:05.1: [1002:970f] type 0 class 0x000403
    [    0.506883] pci 0000:01:05.1: reg 10: [mem 0xfdbfc000-0xfdbfffff]
    [    0.506903] pci 0000:01:05.1: supports D1 D2
    [    0.506930] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [    0.506933] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
    [    0.506935] pci 0000:00:01.0:   bridge window [mem 0xfda00000-0xfdbfffff]
    [    0.506938] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [    0.506967] pci 0000:02:00.0: [1033:0194] type 0 class 0x000c03
    [    0.506981] pci 0000:02:00.0: reg 10: [mem 0xfd7fe000-0xfd7fffff 64bit]
    [    0.507033] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    [    0.507036] pci 0000:02:00.0: PME# disabled
    [    0.512049] pci 0000:00:05.0: PCI bridge to [bus 02-02]
    [    0.512053] pci 0000:00:05.0:   bridge window [io  0xb000-0xbfff]
    [    0.512056] pci 0000:00:05.0:   bridge window [mem 0xfd700000-0xfd7fffff]
    [    0.512059] pci 0000:00:05.0:   bridge window [mem 0xfd600000-0xfd6fffff 64bit pref]
    [    0.512095] pci 0000:03:00.0: [14f1:8852] type 0 class 0x000400
    [    0.512124] pci 0000:03:00.0: reg 10: [mem 0xfd400000-0xfd5fffff 64bit]
    [    0.512234] pci 0000:03:00.0: supports D1 D2
    [    0.512235] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot
    [    0.512241] pci 0000:03:00.0: PME# disabled
    [    0.512269] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
    [    0.512278] pci 0000:00:07.0: PCI bridge to [bus 03-03]
    [    0.512281] pci 0000:00:07.0:   bridge window [io  0xe000-0xefff]
    [    0.512283] pci 0000:00:07.0:   bridge window [mem 0xfd400000-0xfd5fffff]
    [    0.512286] pci 0000:00:07.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
    [    0.512316] pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200
    [    0.512327] pci 0000:04:00.0: reg 10: [io  0xde00-0xdeff]
    [    0.512346] pci 0000:04:00.0: reg 18: [mem 0xfddff000-0xfddfffff 64bit pref]
    [    0.512358] pci 0000:04:00.0: reg 20: [mem 0xfddf8000-0xfddfbfff 64bit pref]
    [    0.512367] pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    [    0.512393] pci 0000:04:00.0: supports D1 D2
    [    0.512394] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.512397] pci 0000:04:00.0: PME# disabled
    [    0.520051] pci 0000:00:0a.0: PCI bridge to [bus 04-04]
    [    0.520056] pci 0000:00:0a.0:   bridge window [io  0xd000-0xdfff]
    [    0.520058] pci 0000:00:0a.0:   bridge window [mem 0xfde00000-0xfdefffff]
    [    0.520061] pci 0000:00:0a.0:   bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
    [    0.520096] pci 0000:05:07.0: [8086:1040] type 0 class 0x000780
    [    0.520114] pci 0000:05:07.0: reg 10: [mem 0xfcc00000-0xfcffffff]
    [    0.520185] pci 0000:05:07.0: supports D2
    [    0.520186] pci 0000:05:07.0: PME# supported from D2 D3hot D3cold
    [    0.520190] pci 0000:05:07.0: PME# disabled
    [    0.520214] pci 0000:05:0e.0: [104c:8024] type 0 class 0x000c00
    [    0.520232] pci 0000:05:0e.0: reg 10: [mem 0xfd3ff000-0xfd3ff7ff]
    [    0.520242] pci 0000:05:0e.0: reg 14: [mem 0xfd3f8000-0xfd3fbfff]
    [    0.520305] pci 0000:05:0e.0: supports D1 D2
    [    0.520306] pci 0000:05:0e.0: PME# supported from D0 D1 D2 D3hot
    [    0.520310] pci 0000:05:0e.0: PME# disabled
    [    0.520336] pci 0000:00:14.4: PCI bridge to [bus 05-05] (subtractive decode)
    [    0.520339] pci 0000:00:14.4:   bridge window [io  0xa000-0xafff]
    [    0.520342] pci 0000:00:14.4:   bridge window [mem 0xfcc00000-0xfd3fffff]
    [    0.520345] pci 0000:00:14.4:   bridge window [mem 0xfdc00000-0xfdcfffff pref]
    [    0.520347] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
    [    0.520349] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
    [    0.520351] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [    0.520352] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
    [    0.520354] pci 0000:00:14.4:   bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
    [    0.520402] pci 0000:06:00.0: [197b:2363] type 0 class 0x000101
    [    0.520481] pci 0000:06:00.0: reg 24: [mem 0xfd9fe000-0xfd9fffff]
    [    0.520519] pci 0000:06:00.0: PME# supported from D3hot
    [    0.520523] pci 0000:06:00.0: PME# disabled
    [    0.520549] pci 0000:06:00.1: [197b:2363] type 0 class 0x000101
    [    0.520570] pci 0000:06:00.1: reg 10: [io  0x9f00-0x9f07]
    [    0.520582] pci 0000:06:00.1: reg 14: [io  0x9e00-0x9e03]
    [    0.520594] pci 0000:06:00.1: reg 18: [io  0x9d00-0x9d07]
    [    0.520605] pci 0000:06:00.1: reg 1c: [io  0x9c00-0x9c03]
    [    0.520617] pci 0000:06:00.1: reg 20: [io  0x9b00-0x9b0f]
    [    0.520679] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
    [    0.520691] pci 0000:00:15.0: PCI bridge to [bus 06-06]
    [    0.520694] pci 0000:00:15.0:   bridge window [io  0x9000-0x9fff]
    [    0.520697] pci 0000:00:15.0:   bridge window [mem 0xfd900000-0xfd9fffff]
    [    0.520701] pci 0000:00:15.0:   bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
    [    0.520717] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [    0.520888] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
    [    0.520914] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
    [    0.520955] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
    [    0.520973] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
    [    0.520991] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
    [    0.521010] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
    [    0.521030]  pci0000:00: Requesting ACPI _OSC control (0x1d)
    [    0.521032]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
    [    0.521034] ACPI _OSC control for PCIe not granted, disabling ASPM
    [    0.528350] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0
    [    0.528377] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0
    [    0.528401] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0
    [    0.528425] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0
    [    0.528448] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0
    [    0.528472] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0
    [    0.528495] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0
    [    0.528518] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0
    [    0.528590] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
    [    0.528593] vgaarb: loaded
    [    0.528594] vgaarb: bridge control possible 0000:01:05.0
    [    0.528720] SCSI subsystem initialized
    [    0.528739] libata version 3.00 loaded.
    [    0.528739] usbcore: registered new interface driver usbfs
    [    0.528739] usbcore: registered new interface driver hub
    [    0.528739] usbcore: registered new device driver usb
    [    0.528739] PCI: Using ACPI for IRQ routing
    [    0.534976] PCI: pci_cache_line_size set to 64 bytes
    [    0.534982] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
    [    0.535058] reserve RAM buffer: 000000000009f800 - 000000000009ffff 
    [    0.535060] reserve RAM buffer: 00000000cfdf0000 - 00000000cfffffff 
    [    0.535128] NetLabel: Initializing
    [    0.535129] NetLabel:  domain hash size = 128
    [    0.535130] NetLabel:  protocols = UNLABELED CIPSOv4
    [    0.535138] NetLabel:  unlabeled traffic allowed by default
    [    0.535163] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [    0.535166] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
    [    0.537059] Switching to clocksource hpet
    [    0.538782] Switched to NOHz mode on CPU #2
    [    0.538787] Switched to NOHz mode on CPU #1
    [    0.538792] Switched to NOHz mode on CPU #3
    [    0.538795] Switched to NOHz mode on CPU #0
    [    0.539876] AppArmor: AppArmor Filesystem Enabled
    [    0.539892] pnp: PnP ACPI init
    [    0.539902] ACPI: bus type pnp registered
    [    0.539969] pnp 00:00: [bus 00-ff]
    [    0.539971] pnp 00:00: [io  0x0cf8-0x0cff]
    [    0.539973] pnp 00:00: [io  0x0000-0x0cf7 window]
    [    0.539974] pnp 00:00: [io  0x0d00-0xffff window]
    [    0.539976] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [    0.539977] pnp 00:00: [mem 0x000c0000-0x000dffff window]
    [    0.539979] pnp 00:00: [mem 0xd0000000-0xfebfffff window]
    [    0.540037] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
    [    0.540044] pnp 00:01: [io  0x0010-0x001f]
    [    0.540045] pnp 00:01: [io  0x0022-0x003f]
    [    0.540047] pnp 00:01: [io  0x0044-0x005f]
    [    0.540048] pnp 00:01: [io  0x0062-0x0063]
    [    0.540049] pnp 00:01: [io  0x0065-0x006f]
    [    0.540050] pnp 00:01: [io  0x0074-0x007f]
    [    0.540051] pnp 00:01: [io  0x0091-0x0093]
    [    0.540053] pnp 00:01: [io  0x00a2-0x00bf]
    [    0.540054] pnp 00:01: [io  0x00e0-0x00ef]
    [    0.540055] pnp 00:01: [io  0x04d0-0x04d1]
    [    0.540056] pnp 00:01: [io  0x0220-0x0225]
    [    0.540057] pnp 00:01: [io  0x0290-0x0294]
    [    0.540098] system 00:01: [io  0x04d0-0x04d1] has been reserved
    [    0.540100] system 00:01: [io  0x0220-0x0225] has been reserved
    [    0.540102] system 00:01: [io  0x0290-0x0294] has been reserved
    [    0.540104] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.602259] Freeing initrd memory: 19472k freed
    [    0.644364] pnp 00:02: [io  0x4100-0x411f]
    [    0.644367] pnp 00:02: [io  0x0228-0x022f]
    [    0.644369] pnp 00:02: [io  0x040b]
    [    0.644370] pnp 00:02: [io  0x04d6]
    [    0.644371] pnp 00:02: [io  0x0c00-0x0c01]
    [    0.644372] pnp 00:02: [io  0x0c14]
    [    0.644373] pnp 00:02: [io  0x0c50-0x0c52]
    [    0.644374] pnp 00:02: [io  0x0c6c-0x0c6d]
    [    0.644375] pnp 00:02: [io  0x0c6f]
    [    0.644377] pnp 00:02: [io  0x0cd0-0x0cd1]
    [    0.644378] pnp 00:02: [io  0x0cd2-0x0cd3]
    [    0.644379] pnp 00:02: [io  0x0cd4-0x0cdf]
    [    0.644380] pnp 00:02: [io  0x4000-0x40fe]
    [    0.644381] pnp 00:02: [io  0x4210-0x4217]
    [    0.644382] pnp 00:02: [io  0x0b00-0x0b0f]
    [    0.644383] pnp 00:02: [io  0x0b10-0x0b1f]
    [    0.644385] pnp 00:02: [io  0x0b20-0x0b3f]
    [    0.644386] pnp 00:02: [mem 0x00000000-0x00000fff window]
    [    0.644388] pnp 00:02: [mem 0xfee00400-0xfee00fff window]
    [    0.644394] pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [    0.644426] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:04:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
    [    0.644473] system 00:02: [io  0x4100-0x411f] has been reserved
    [    0.644476] system 00:02: [io  0x0228-0x022f] has been reserved
    [    0.644477] system 00:02: [io  0x040b] has been reserved
    [    0.644479] system 00:02: [io  0x04d6] has been reserved
    [    0.644481] system 00:02: [io  0x0c00-0x0c01] has been reserved
    [    0.644483] system 00:02: [io  0x0c14] has been reserved
    [    0.644484] system 00:02: [io  0x0c50-0x0c52] has been reserved
    [    0.644486] system 00:02: [io  0x0c6c-0x0c6d] has been reserved
    [    0.644487] system 00:02: [io  0x0c6f] has been reserved
    [    0.644489] system 00:02: [io  0x0cd0-0x0cd1] has been reserved
    [    0.644490] system 00:02: [io  0x0cd2-0x0cd3] has been reserved
    [    0.644492] system 00:02: [io  0x0cd4-0x0cdf] has been reserved
    [    0.644494] system 00:02: [io  0x4000-0x40fe] has been reserved
    [    0.644495] system 00:02: [io  0x4210-0x4217] has been reserved
    [    0.644497] system 00:02: [io  0x0b00-0x0b0f] has been reserved
    [    0.644499] system 00:02: [io  0x0b10-0x0b1f] has been reserved
    [    0.644500] system 00:02: [io  0x0b20-0x0b3f] has been reserved
    [    0.644502] system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
    [    0.644505] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.644568] pnp 00:03: [dma 4]
    [    0.644569] pnp 00:03: [io  0x0000-0x000f]
    [    0.644570] pnp 00:03: [io  0x0080-0x0090]
    [    0.644571] pnp 00:03: [io  0x0094-0x009f]
    [    0.644573] pnp 00:03: [io  0x00c0-0x00df]
    [    0.644591] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
    [    0.644621] pnp 00:04: [io  0x0070-0x0073]
    [    0.644631] pnp 00:04: [irq 8]
    [    0.644651] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
    [    0.644656] pnp 00:05: [io  0x0061]
    [    0.644672] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
    [    0.644677] pnp 00:06: [io  0x00f0-0x00ff]
    [    0.644682] pnp 00:06: [irq 13]
    [    0.644699] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
    [    0.644873] pnp 00:07: [io  0x03f8-0x03ff]
    [    0.644879] pnp 00:07: [irq 4]
    [    0.644916] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
    [    0.644936] pnp 00:08: [io  0x0060]
    [    0.644937] pnp 00:08: [io  0x0064]
    [    0.644943] pnp 00:08: [irq 1]
    [    0.644965] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
    [    0.644984] pnp 00:09: [mem 0xe0000000-0xefffffff]
    [    0.645019] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
    [    0.645021] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.645114] pnp 00:0a: [mem 0x000cee00-0x000cffff]
    [    0.645115] pnp 00:0a: [mem 0x000f0000-0x000f7fff]
    [    0.645116] pnp 00:0a: [mem 0x000f8000-0x000fbfff]
    [    0.645118] pnp 00:0a: [mem 0x000fc000-0x000fffff]
    [    0.645119] pnp 00:0a: [mem 0xcfdf0000-0xcfdfffff]
    [    0.645120] pnp 00:0a: [mem 0xffff0000-0xffffffff]
    [    0.645121] pnp 00:0a: [mem 0x00000000-0x0009ffff]
    [    0.645123] pnp 00:0a: [mem 0x00100000-0xcfdeffff]
    [    0.645124] pnp 00:0a: [mem 0xcfe00000-0xcfefffff]
    [    0.645125] pnp 00:0a: [mem 0xcff00000-0xcfffffff]
    [    0.645127] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
    [    0.645128] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
    [    0.645129] pnp 00:0a: [mem 0xfee00000-0xfee00fff]
    [    0.645131] pnp 00:0a: [mem 0xfff80000-0xfffeffff]
    [    0.645133] pnp 00:0a: disabling [mem 0x000cee00-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [    0.645136] pnp 00:0a: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [    0.645138] pnp 00:0a: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [    0.645141] pnp 00:0a: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [    0.645143] pnp 00:0a: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [    0.645146] pnp 00:0a: disabling [mem 0x00100000-0xcfdeffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [    0.645190] system 00:0a: [mem 0xcfdf0000-0xcfdfffff] could not be reserved
    [    0.645192] system 00:0a: [mem 0xffff0000-0xffffffff] has been reserved
    [    0.645194] system 00:0a: [mem 0xcfe00000-0xcfefffff] has been reserved
    [    0.645196] system 00:0a: [mem 0xcff00000-0xcfffffff] could not be reserved
    [    0.645198] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
    [    0.645199] system 00:0a: [mem 0xfee00000-0xfee00fff] could not be reserved
    [    0.645201] system 00:0a: [mem 0xfff80000-0xfffeffff] has been reserved
    [    0.645203] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
    [    0.645216] pnp: PnP ACPI: found 11 devices
    [    0.645217] ACPI: ACPI bus type pnp unregistered
    [    0.650617] PCI: max bus depth: 1 pci_try_num: 2
    [    0.650639] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [    0.650642] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
    [    0.650644] pci 0000:00:01.0:   bridge window [mem 0xfda00000-0xfdbfffff]
    [    0.650646] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [    0.650649] pci 0000:00:05.0: PCI bridge to [bus 02-02]
    [    0.650651] pci 0000:00:05.0:   bridge window [io  0xb000-0xbfff]
    [    0.650653] pci 0000:00:05.0:   bridge window [mem 0xfd700000-0xfd7fffff]
    [    0.650656] pci 0000:00:05.0:   bridge window [mem 0xfd600000-0xfd6fffff 64bit pref]
    [    0.650659] pci 0000:00:07.0: PCI bridge to [bus 03-03]
    [    0.650660] pci 0000:00:07.0:   bridge window [io  0xe000-0xefff]
    [    0.650663] pci 0000:00:07.0:   bridge window [mem 0xfd400000-0xfd5fffff]
    [    0.650665] pci 0000:00:07.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
    [    0.650670] pci 0000:04:00.0: BAR 6: assigned [mem 0xfdd00000-0xfdd1ffff pref]
    [    0.650672] pci 0000:00:0a.0: PCI bridge to [bus 04-04]
    [    0.650673] pci 0000:00:0a.0:   bridge window [io  0xd000-0xdfff]
    [    0.650676] pci 0000:00:0a.0:   bridge window [mem 0xfde00000-0xfdefffff]
    [    0.650678] pci 0000:00:0a.0:   bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
    [    0.650681] pci 0000:00:14.4: PCI bridge to [bus 05-05]
    [    0.650683] pci 0000:00:14.4:   bridge window [io  0xa000-0xafff]
    [    0.650687] pci 0000:00:14.4:   bridge window [mem 0xfcc00000-0xfd3fffff]
    [    0.650690] pci 0000:00:14.4:   bridge window [mem 0xfdc00000-0xfdcfffff pref]
    [    0.650695] pci 0000:00:15.0: PCI bridge to [bus 06-06]
    [    0.650697] pci 0000:00:15.0:   bridge window [io  0x9000-0x9fff]
    [    0.650700] pci 0000:00:15.0:   bridge window [mem 0xfd900000-0xfd9fffff]
    [    0.650703] pci 0000:00:15.0:   bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
    [    0.650721] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [    0.650723] pci 0000:00:05.0: setting latency timer to 64
    [    0.650732] pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    [    0.650734] pci 0000:00:07.0: setting latency timer to 64
    [    0.650743] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [    0.650745] pci 0000:00:0a.0: setting latency timer to 64
    [    0.650752] pci 0000:00:15.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [    0.650755] pci 0000:00:15.0: setting latency timer to 64
    [    0.650758] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
    [    0.650760] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
    [    0.650761] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [    0.650763] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
    [    0.650764] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff]
    [    0.650766] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
    [    0.650767] pci_bus 0000:01: resource 1 [mem 0xfda00000-0xfdbfffff]
    [    0.650769] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    [    0.650771] pci_bus 0000:02: resource 0 [io  0xb000-0xbfff]
    [    0.650772] pci_bus 0000:02: resource 1 [mem 0xfd700000-0xfd7fffff]
    [    0.650774] pci_bus 0000:02: resource 2 [mem 0xfd600000-0xfd6fffff 64bit pref]
    [    0.650776] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
    [    0.650777] pci_bus 0000:03: resource 1 [mem 0xfd400000-0xfd5fffff]
    [    0.650779] pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
    [    0.650780] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
    [    0.650782] pci_bus 0000:04: resource 1 [mem 0xfde00000-0xfdefffff]
    [    0.650784] pci_bus 0000:04: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
    [    0.650785] pci_bus 0000:05: resource 0 [io  0xa000-0xafff]
    [    0.650787] pci_bus 0000:05: resource 1 [mem 0xfcc00000-0xfd3fffff]
    [    0.650788] pci_bus 0000:05: resource 2 [mem 0xfdc00000-0xfdcfffff pref]
    [    0.650790] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
    [    0.650791] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
    [    0.650793] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
    [    0.650794] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff]
    [    0.650796] pci_bus 0000:05: resource 8 [mem 0xd0000000-0xfebfffff]
    [    0.650797] pci_bus 0000:06: resource 0 [io  0x9000-0x9fff]
    [    0.650799] pci_bus 0000:06: resource 1 [mem 0xfd900000-0xfd9fffff]
    [    0.650800] pci_bus 0000:06: resource 2 [mem 0xfd800000-0xfd8fffff 64bit pref]
    [    0.650832] NET: Registered protocol family 2
    [    0.650942] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [    0.651775] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [    0.653796] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [    0.654044] TCP: Hash tables configured (established 524288 bind 65536)
    [    0.654046] TCP reno registered
    [    0.654053] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [    0.654077] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [    0.654185] NET: Registered protocol family 1
    [    0.654194] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
    [    0.720122] pci 0000:01:05.0: Boot video device
    [    0.720159] PCI: CLS 4 bytes, default 64
    [    0.721600] PCI-DMA: Disabling AGP.
    [    0.721671] PCI-DMA: aperture base @ c4000000 size 65536 KB
    [    0.721672] PCI-DMA: using GART IOMMU.
    [    0.721674] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
    [    0.724795] audit: initializing netlink socket (disabled)
    [    0.724804] type=2000 audit(1322402089.720:1): initialized
    [    0.745456] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [    0.759916] VFS: Disk quotas dquot_6.5.2
    [    0.759957] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [    0.760385] fuse init (API version 7.16)
    [    0.760438] msgmni has been set to 6906
    [    0.760799] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [    0.760829] io scheduler noop registered
    [    0.760830] io scheduler deadline registered
    [    0.760856] io scheduler cfq registered (default)
    [    0.761031] pcieport 0000:00:05.0: setting latency timer to 64
    [    0.761059] pcieport 0000:00:05.0: irq 40 for MSI/MSI-X
    [    0.761138] pcieport 0000:00:07.0: setting latency timer to 64
    [    0.761157] pcieport 0000:00:07.0: irq 41 for MSI/MSI-X
    [    0.761227] pcieport 0000:00:0a.0: setting latency timer to 64
    [    0.761245] pcieport 0000:00:0a.0: irq 42 for MSI/MSI-X
    [    0.761357] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [    0.761373] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [    0.761454] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
    [    0.761458] ACPI: Power Button [PWRB]
    [    0.761486] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
    [    0.761489] ACPI: Power Button [PWRF]
    [    0.761504] ACPI: acpi_idle registered with cpuidle
    [    0.761523] ACPI: processor limited to max C-state 1
    [    0.952612] ERST: Table is not found!
    [    0.952658] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
    [    0.973002] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [    1.032621] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [    1.032795] Linux agpgart interface v0.103
    [    1.033426] brd: module loaded
    [    1.033725] loop: module loaded
    [    1.033895] pata_acpi 0000:00:14.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [    1.033986] pata_acpi 0000:06:00.1: enabling device (0000 -> 0001)
    [    1.033991] pata_acpi 0000:06:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [    1.034008] pata_acpi 0000:06:00.1: setting latency timer to 64
    [    1.034016] pata_acpi 0000:06:00.1: PCI INT B disabled
    [    1.034285] Fixed MDIO Bus: probed
    [    1.034301] PPP generic driver version 2.4.2
    [    1.034327] tun: Universal TUN/TAP device driver, 1.6
    [    1.034328] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
    [    1.034379] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    1.034418] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [    1.034438] ehci_hcd 0000:00:12.2: EHCI Host Controller
    [    1.034467] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
    [    1.034474] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [    1.034488] QUIRK: Enable AMD PLL fix
    [    1.034496] ehci_hcd 0000:00:12.2: debug port 1
    [    1.034519] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02d000
    [    1.044067] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
    [    1.044149] hub 1-0:1.0: USB hub found
    [    1.044152] hub 1-0:1.0: 5 ports detected
    [    1.044270] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [    1.044280] ehci_hcd 0000:00:13.2: EHCI Host Controller
    [    1.044303] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
    [    1.044309] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [    1.044326] ehci_hcd 0000:00:13.2: debug port 1
    [    1.044336] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe02b000
    [    1.056066] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
    [    1.056137] hub 2-0:1.0: USB hub found
    [    1.056140] hub 2-0:1.0: 5 ports detected
    [    1.056252] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [    1.056262] ehci_hcd 0000:00:16.2: EHCI Host Controller
    [    1.056285] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
    [    1.056292] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [    1.056307] ehci_hcd 0000:00:16.2: debug port 1
    [    1.056317] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe028000
    [    1.068066] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
    [    1.068136] hub 3-0:1.0: USB hub found
    [    1.068139] hub 3-0:1.0: 4 ports detected
    [    1.068199] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    1.068265] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [    1.068276] ohci_hcd 0000:00:12.0: OHCI Host Controller
    [    1.068299] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
    [    1.068322] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe02e000
    [    1.128111] hub 4-0:1.0: USB hub found
    [    1.128116] hub 4-0:1.0: 5 ports detected
    [    1.128249] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [    1.128259] ohci_hcd 0000:00:13.0: OHCI Host Controller
    [    1.128284] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
    [    1.128297] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02c000
    [    1.188119] hub 5-0:1.0: USB hub found
    [    1.188124] hub 5-0:1.0: 5 ports detected
    [    1.188256] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [    1.188267] ohci_hcd 0000:00:14.5: OHCI Host Controller
    [    1.188290] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
    [    1.188302] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe02a000
    [    1.248113] hub 6-0:1.0: USB hub found
    [    1.248118] hub 6-0:1.0: 2 ports detected
    [    1.248236] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [    1.248247] ohci_hcd 0000:00:16.0: OHCI Host Controller
    [    1.248268] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
    [    1.248281] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe029000
    [    1.308107] hub 7-0:1.0: USB hub found
    [    1.308112] hub 7-0:1.0: 4 ports detected
    [    1.308184] uhci_hcd: USB Universal Host Controller Interface driver
    [    1.308228] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    [    1.308230] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    [    1.308343] serio: i8042 KBD port at 0x60,0x64 irq 1
    [    1.308404] mousedev: PS/2 mouse device common for all mice
    [    1.308471] rtc_cmos 00:04: RTC can wake from S4
    [    1.308533] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
    [    1.308555] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
    [    1.308615] device-mapper: uevent: version 1.0.3
    [    1.308657] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
    [    1.308662] cpuidle: using governor ladder
    [    1.308663] cpuidle: using governor menu
    [    1.308664] EFI Variables Facility v0.08 2004-May-17
    [    1.308806] TCP cubic registered
    [    1.308881] NET: Registered protocol family 10
    [    1.309196] NET: Registered protocol family 17
    [    1.309206] Registering the dns_resolver key type
    [    1.309267] PM: Hibernation image not present or could not be loaded.
    [    1.309273] registered taskstats version 1
    [    1.320636]   Magic number: 3:330:939
    [    1.320717] rtc_cmos 00:04: setting system clock to 2011-11-27 13:54:51 UTC (1322402091)
    [    1.320730] powernow-k8: Found 1 AMD Phenom(tm) II X4 955 Processor (4 cpu cores) (version 2.20.00)
    [    1.320756] powernow-k8:    0 : pstate 0 (3200 MHz)
    [    1.320757] powernow-k8:    1 : pstate 1 (2500 MHz)
    [    1.320758] powernow-k8:    2 : pstate 2 (2100 MHz)
    [    1.320760] powernow-k8:    3 : pstate 3 (800 MHz)
    [    1.320980] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    [    1.320982] EDD information not available.
    [    1.322133] Freeing unused kernel memory: 984k freed
    [    1.322313] Write protecting the kernel read-only data: 10240k
    [    1.322485] Freeing unused kernel memory: 20k freed
    [    1.325897] Freeing unused kernel memory: 1396k freed
    [    1.328919] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
    [    1.338580] udevd[137]: starting version 173
    [    1.355339] [drm] Initialized drm 1.1.0 20060810
    [    1.355939] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [    1.355958] r8169 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [    1.356020] r8169 0000:04:00.0: setting latency timer to 64
    [    1.356060] usb 1-2: new high speed USB device number 2 using ehci_hcd
    [    1.356063] r8169 0000:04:00.0: irq 43 for MSI/MSI-X
    [    1.356387] r8169 0000:04:00.0: eth0: RTL8168d/8111d at 0xffffc90000672000, 6c:f0:49:ec:94:5d, XID 083000c0 IRQ 43
    [    1.362703] pata_jmicron 0000:06:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [    1.362731] pata_jmicron 0000:06:00.1: setting latency timer to 64
    [    1.362914] ahci 0000:00:11.0: version 3.0
    [    1.362921] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    [    1.362970] ahci 0000:00:11.0: irq 44 for MSI/MSI-X
    [    1.363038] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
    [    1.363040] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
    [    1.365011] scsi0 : pata_jmicron
    [    1.365741] scsi1 : ahci
    [    1.366881] scsi2 : pata_jmicron
    [    1.366936] ata1: PATA max UDMA/100 cmd 0x9f00 ctl 0x9e00 bmdma 0x9b00 irq 17
    [    1.366938] ata2: PATA max UDMA/100 cmd 0x9d00 ctl 0x9c00 bmdma 0x9b08 irq 17
    [    1.367512] [drm] radeon defaulting to kernel modesetting.
    [    1.367514] [drm] radeon kernel modesetting enabled.
    [    1.367613] scsi3 : ahci
    [    1.367668] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [    1.367672] radeon 0000:01:05.0: setting latency timer to 64
    [    1.367788] [drm] initializing kernel modesetting (RS880 0x1002:0x9714 0x1458:0xD000).
    [    1.367808] [drm] register mmio base: 0xFDBE0000
    [    1.367809] [drm] register mmio size: 65536
    [    1.368206] ATOM BIOS: B43106_DVI
    [    1.368223] radeon 0000:01:05.0: VRAM: 624M 0x00000000C0000000 - 0x00000000E6FFFFFF (624M used)
    [    1.368225] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
    [    1.370376] [drm] Detected VRAM RAM=624M, BAR=256M
    [    1.370380] [drm] RAM width 32bits DDR
    [    1.371008] scsi4 : ahci
    [    1.371265] [TTM] Zone  kernel: Available graphics memory: 1769336 kiB.
    [    1.371266] [TTM] Initializing pool allocator.
    [    1.371294] [drm] radeon: 624M of VRAM memory ready
    [    1.371296] [drm] radeon: 512M of GTT memory ready.
    [    1.371313] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [    1.371314] [drm] Driver supports precise vblank timestamp query.
    [    1.371329] [drm] radeon: irq initialized.
    [    1.371333] [drm] GART: num cpu pages 131072, num gpu pages 131072
    [    1.371961] [drm] Loading RS780 Microcode
    [    1.371991] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [    1.372079] xhci_hcd 0000:02:00.0: setting latency timer to 64
    [    1.372082] xhci_hcd 0000:02:00.0: xHCI Host Controller
    [    1.372130] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
    [    1.372139] scsi5 : ahci
    [    1.372215] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 44
    [    1.372218] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 44
    [    1.372220] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 44
    [    1.372223] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 44
    [    1.372351] xhci_hcd 0000:02:00.0: irq 17, io mem 0xfd7fe000
    [    1.372397] xhci_hcd 0000:02:00.0: irq 45 for MSI/MSI-X
    [    1.372400] xhci_hcd 0000:02:00.0: irq 46 for MSI/MSI-X
    [    1.372404] xhci_hcd 0000:02:00.0: irq 47 for MSI/MSI-X
    [    1.372407] xhci_hcd 0000:02:00.0: irq 48 for MSI/MSI-X
    [    1.372410] xhci_hcd 0000:02:00.0: irq 49 for MSI/MSI-X
    [    1.372526] xHCI xhci_add_endpoint called for root hub
    [    1.372527] xHCI xhci_check_bandwidth called for root hub
    [    1.372549] hub 8-0:1.0: USB hub found
    [    1.372555] hub 8-0:1.0: 2 ports detected
    [    1.372611] xhci_hcd 0000:02:00.0: xHCI Host Controller
    [    1.372633] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
    [    1.373458] wmi: Mapper loaded
    [    1.375789] xHCI xhci_add_endpoint called for root hub
    [    1.375790] xHCI xhci_check_bandwidth called for root hub
    [    1.375804] hub 9-0:1.0: USB hub found
    [    1.375812] hub 9-0:1.0: 2 ports detected
    [    1.375868] ahci 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [    1.376245] scsi6 : pata_atiixp
    [    1.376387] scsi7 : pata_atiixp
    [    1.376752] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
    [    1.376754] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
    [    1.388057] ahci 0000:06:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
    [    1.388061] ahci 0000:06:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
    [    1.388066] ahci 0000:06:00.0: setting latency timer to 64
    [    1.388304] scsi8 : ahci
    [    1.388360] scsi9 : ahci
    [    1.388389] ata9: SATA max UDMA/133 abar m8192@0xfd9fe000 port 0xfd9fe100 irq 17
    [    1.388393] ata10: SATA max UDMA/133 abar m8192@0xfd9fe000 port 0xfd9fe180 irq 17
    [    1.390764] radeon 0000:01:05.0: WB enabled
    [    1.421704] [drm] ring test succeeded in 1 usecs
    [    1.421778] [drm] radeon: ib pool ready.
    [    1.421825] [drm] ib test succeeded in 0 usecs
    [    1.421831] failed to evaluate ATIF got AE_BAD_PARAMETER
    [    1.421967] [drm] Radeon Display Connectors
    [    1.421968] [drm] Connector 0:
    [    1.421969] [drm]   VGA
    [    1.421970] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
    [    1.421972] [drm]   Encoders:
    [    1.421973] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
    [    1.421974] [drm] Connector 1:
    [    1.421974] [drm]   DVI-D
    [    1.421975] [drm]   HPD1
    [    1.421976] [drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
    [    1.421977] [drm]   Encoders:
    [    1.421979] [drm]     DFP1: INTERNAL_KLDSCP_LVTMA
    [    1.473596] [drm] Radeon display connector VGA-1: Found valid EDID
    [    1.483042] [drm] Radeon display connector DVI-D-1: No monitor connected or invalid EDID
    [    1.483057] [drm] radeon: power management initialized
    [    1.555672] [drm] fb mappable at 0xD0141000
    [    1.555673] [drm] vram apper at 0xD0000000
    [    1.555674] [drm] size 5242880
    [    1.555675] [drm] fb depth is 24
    [    1.555676] [drm]    pitch is 5120
    [    1.555714] fbcon: radeondrmfb (fb0) is primary device
    [    1.555757] Console: switching to colour frame buffer device 160x64
    [    1.555776] fb0: radeondrmfb frame buffer device
    [    1.555777] drm: registered panic notifier
    [    1.555782] [drm] Initialized radeon 2.10.0 20080528 for 0000:01:05.0 on minor 0
    [    1.692095] ata5: SATA link down (SStatus 0 SControl 300)
    [    1.696094] ata3: SATA link down (SStatus 0 SControl 300)
    [    1.708119] ata9: SATA link down (SStatus 0 SControl 300)
    [    1.724075] Refined TSC clocksource calibration: 3214.108 MHz.
    [    1.724084] Switching to clocksource tsc
    [    1.864067] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [    1.864085] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [    1.866092] ata4.00: ATA-8: WDC WD1002FAEX-007BA0, 05.01D05, max UDMA/133
    [    1.866095] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [    1.867550] ata4.00: configured for UDMA/133
    [    1.867681] scsi 3:0:0:0: Direct-Access     ATA      WDC WD1002FAEX-0 05.0 PQ: 0 ANSI: 5
    [    1.867782] sd 3:0:0:0: Attached scsi generic sg0 type 0
    [    1.867811] sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [    1.867843] sd 3:0:0:0: [sda] Write Protect is off
    [    1.867845] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    1.867862] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    1.884081] ata10: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [    1.887107] ata10.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN03, max UDMA/100
    [    1.890928] ata10.00: configured for UDMA/100
    [    1.902469] ata6.00: ATA-7: WDC WD1600AABS-61PRA0, 05.06H05, max UDMA/133
    [    1.902472] ata6.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [    1.903167] ata6.00: configured for UDMA/133
    [    1.903266] scsi 5:0:0:0: Direct-Access     ATA      WDC WD1600AABS-6 05.0 PQ: 0 ANSI: 5
    [    1.903357] sd 5:0:0:0: Attached scsi generic sg1 type 0
    [    1.903368] sd 5:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
    [    1.903414] sd 5:0:0:0: [sdb] Write Protect is off
    [    1.903416] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [    1.903434] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    1.906767] scsi 9:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH22NS50  TN03 PQ: 0 ANSI: 5
    [    1.908405]  sda: sda1 sda2 sda4 < sda5 sda6 sda7 sda8 >
    [    1.908721] sd 3:0:0:0: [sda] Attached SCSI disk
    [    1.914157]  sdb: sdb1
    [    1.914363] sd 5:0:0:0: [sdb] Attached SCSI disk
    [    1.915185] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    [    1.915187] cdrom: Uniform CD-ROM driver Revision: 3.20
    [    1.915264] sr 9:0:0:0: Attached scsi CD-ROM sr0
    [    1.915301] sr 9:0:0:0: Attached scsi generic sg2 type 5
    [    1.916343] firewire_ohci 0000:05:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [    1.972113] firewire_ohci: Added fw-ohci device 0000:05:0e.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
    [    2.056020] usb 4-5: new full speed USB device number 2 using ohci_hcd
    [    2.472117] firewire_core: created device fw0: GUID 00eb806d006cf049, S400
    [    2.696406] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
    [    2.736060] usb 5-1: new low speed USB device number 2 using ohci_hcd
    [    3.192026] usb 5-2: new full speed USB device number 3 using ohci_hcd
    [    3.332020] usb 5-2: device descriptor read/64, error -62
    [    3.576058] usb 5-2: device descriptor read/64, error -62
    [    3.816052] usb 5-2: new full speed USB device number 4 using ohci_hcd
    [    3.956049] usb 5-2: device descriptor read/64, error -62
    [    4.200046] usb 5-2: device descriptor read/64, error -62
    [    4.440018] usb 5-2: new full speed USB device number 5 using ohci_hcd
    [    4.848043] usb 5-2: device not accepting address 5, error -62
    [    4.984044] usb 5-2: new full speed USB device number 6 using ohci_hcd
    [    5.392042] usb 5-2: device not accepting address 6, error -62
    [    5.392072] hub 5-0:1.0: unable to enumerate USB device on port 2
    [    5.504065] usb 8-2: new low speed USB device number 2 using xhci_hcd
    [    5.557961] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
    [    5.570946] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
    [    5.577971] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
    [    5.579043] usb 8-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
    [    8.874987] udevd[471]: starting version 173
    [    8.893771] lp: driver loaded but no devices found
    [    8.894866] Adding 999420k swap on /dev/sda6.  Priority:-1 extents:1 across:999420k 
    [    8.895956] shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602 ss_vid 1022 ss_did 9602
    [    8.895960] shpchp 0000:00:01.0: Cannot reserve MMIO region
    [    8.896059] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [    8.899231] Linux video capture interface: v2.00
    [    8.902860] altera_stapl: module is from the staging directory, the quality is unknown, you have been warned.
    [    8.907038] IR NEC protocol handler initialized
    [    8.908061] IR RC5(x) protocol handler initialized
    [    8.911497] IR RC6 protocol handler initialized
    [    8.917004] IR JVC protocol handler initialized
    [    8.920504] IR Sony protocol handler initialized
    [    8.926016] lirc_dev: IR Remote Control driver registered, major 250 
    [    8.926149] IR LIRC bridge handler initialized
    [    8.930400] type=1400 audit(1322412899.104:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=611 comm="apparmor_parser"
    [    8.930734] type=1400 audit(1322412899.104:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=611 comm="apparmor_parser"
    [    8.930945] type=1400 audit(1322412899.104:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=611 comm="apparmor_parser"
    [    8.944199] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
    [    8.944631] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
    [    8.944690] SP5100 TCO timer: mmio address 0xb8fe00 already in use
    [    8.953558] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    8.967481] MCE: In-kernel MCE decoding enabled.
    [    8.968101] EDAC MC: Ver: 2.1.0
    [    8.969774] AMD64 EDAC driver v3.4.0
    [    8.998885] hda_codec: ALC892: BIOS auto-probing.
    [    9.004595] cx23885 driver version 0.0.3 loaded
    [    9.008029] cx23885 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    [    9.008192] CORE cx23885[0]: subsystem: 14f1:8502, board: Mygica X8507 [card=33,autodetected]
    [    9.172357] uvcvideo: Found UVC 1.00 device Vimicro USB Camera (Altair) (0ac8:3450)
    [    9.174491] NET: Registered protocol family 8
    [    9.174493] NET: Registered protocol family 20
    [    9.174811] input: Vimicro USB Camera (Altair) as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2:1.0/input/input3
    [    9.175039] usbcore: registered new interface driver uvcvideo
    [    9.175040] USB Video Class driver (v1.1.0)
    [    9.175310] [ueagle-atm] driver ueagle 1.4 loaded
    [    9.175327] usb 4-5: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X9021) Rev (0X500B): Eagle II
    [    9.182235] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input4
    [    9.182311] generic-usb 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:13.0-1/input0
    [    9.221083] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
    [    9.222132] input: Sanmos TWIN SHOCK gamepad as /devices/pci0000:00/0000:00:05.0/0000:02:00.0/usb8/8-2/8-2:1.0/input/input5
    [    9.222201] generic-usb 0003:11C0:5400.0002: input,hidraw1: USB HID v1.00 Joystick [Sanmos TWIN SHOCK gamepad] on usb-0000:02:00.0-2/input0
    [    9.222215] usbcore: registered new interface driver usbhid
    [    9.222217] usbhid: USB HID core driver
    [    9.306242] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
    [    9.306510] HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [    9.306548] HDA Intel 0000:01:05.1: setting latency timer to 64
    [    9.308047] usb 4-5: reset full speed USB device number 2 using ohci_hcd
    [    9.333974] EDAC amd64: DRAM ECC disabled.
    [    9.333985] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
    [    9.333986]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
    [    9.333987]  (Note that use of the override may cause unknown side effects.)
    [    9.616963] cx25840 8-0044: cx23885 A/V decoder found @ 0x88 (cx23885[0])
    [    9.721130] usb 4-5: [ueagle-atm] using iso mode
    [    9.723145] usb 4-5: [ueagle-atm] (re)booting started
    [    9.723161] usbcore: registered new interface driver ueagle-atm
    [    9.871979] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
    [   10.005159] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
    [   10.250784] cx25840 8-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes)
    [   10.359428] r8169 0000:04:00.0: eth0: link down
    [   10.359812] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   10.365241] i2c-core: driver [tuner] using legacy suspend method
    [   10.365243] i2c-core: driver [tuner] using legacy resume method
    [   10.365413] tuner 7-0061: Tuner -1 found with type(s) Radio TV.
    [   10.386519] xc5000 7-0061: creating new instance
    [   10.387205] xc5000: Successfully identified at address 0x61
    [   10.387206] xc5000: Firmware has not been loaded previously
    [   10.387268] cx23885[0]: registered device video1 [v4l2]
    [   10.387287] cx23885[0]: registered device vbi0
    [   10.387366] cx23885[0]: registered ALSA audio device
    [   10.392712] xc5000: waiting for firmware upload (dvb-fe-xc5000-1.6.114.fw)...
    [   10.396406] xc5000: firmware read 12401 bytes.
    [   10.396408] xc5000: firmware uploading...
    [   11.421106] usb 4-5: [ueagle-atm] ATU-R firmware version : 44e2ea17
    [   11.422096] usb 4-5: [Ueagle-atm] requesting firmware ueagle-atm/CMVep.bin.v2 failed, try to get older cmvs
    [   11.423310] usb 4-5: [Ueagle-atm] use deprecated cmvs version, please update your firmware
    [   11.458105] usb 4-5: [ueagle-atm] modem started, waiting synchronization...
    [   11.764050] xc5000: firmware upload complete...
    [   12.436886] cx23885_dvb_register() allocating 1 frontend(s)
    [   12.436889] cx23885[0]: cx23885 based dvb card
    [   12.451852] mb86a20s: mb86a20s_attach: 
    [   12.452330] Detected a Fujitsu mb86a20s frontend
    [   12.452334] xc5000 7-0061: attaching existing instance
    [   12.453051] xc5000: Successfully identified at address 0x61
    [   12.453052] xc5000: Firmware has been loaded previously
    [   12.453055] DVB: registering new adapter (cx23885[0])
    [   12.453057] DVB: registering adapter 0 frontend 0 (Fujitsu mb86A20s)...
    [   12.453279] cx23885_dev_checkrevision() Hardware revision = 0xb0
    [   12.453283] cx23885[0]/0: found at 0000:03:00.0, rev: 2, irq: 19, latency: 0, mmio: 0xfd400000
    [   12.453290] cx23885 0000:03:00.0: setting latency timer to 64
    [   12.587588] ppdev: user-space parallel port driver
    [   12.592975] type=1400 audit(1322412902.768:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1116 comm="apparmor_parser"
    [   12.593346] type=1400 audit(1322412902.768:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1116 comm="apparmor_parser"
    [   22.563135] usb 4-5: [ueagle-atm] modem operational
    [   69.182195] usb 5-1: USB disconnect, device number 2
    [   70.736049] usb 5-1: new low speed USB device number 7 using ohci_hcd
    [   70.912296] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input7
    [   70.912367] generic-usb 0003:093A:2510.0003: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:13.0-1/input0
    [  130.239095] type=1400 audit(1322413020.412:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1166 comm="apparmor_parser"
    [  130.239141] type=1400 audit(1322413020.412:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi" pid=1169 comm="apparmor_parser"
    [  130.239344] type=1400 audit(1322413020.412:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" pid=1169 comm="apparmor_parser"
    [  130.239411] type=1400 audit(1322413020.412:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1166 comm="apparmor_parser"
    [  130.239553] type=1400 audit(1322413020.412:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1168 comm="apparmor_parser"
    [  130.239609] type=1400 audit(1322413020.412:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1166 comm="apparmor_parser"
    [  130.239650] type=1400 audit(1322413020.412:13): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1170 comm="apparmor_parser"
    [  130.240300] type=1400 audit(1322413020.416:14): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1168 comm="apparmor_parser"
    [  130.292899] init: apport pre-start process (1201) terminated with status 1
    [  130.293004] init: alsa-restore main process (1210) terminated with status 99
    [  130.302130] init: apport post-stop process (1233) terminated with status 1
    [  130.342814] Bluetooth: Core ver 2.16
    [  130.342833] NET: Registered protocol family 31
    [  130.342835] Bluetooth: HCI device and connection manager initialized
    [  130.342837] Bluetooth: HCI socket layer initialized
    [  130.342838] Bluetooth: L2CAP socket layer initialized
    [  130.342875] Bluetooth: SCO socket layer initialized
    [  130.344369] Bluetooth: RFCOMM TTY layer initialized
    [  130.344373] Bluetooth: RFCOMM socket layer initialized
    [  130.344375] Bluetooth: RFCOMM ver 1.11
    [  130.344448] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [  130.344450] Bluetooth: BNEP filters: protocol multicast
    [  130.732463] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro,commit=0
    [  131.001055] EXT4-fs (sda8): re-mounted. Opts: commit=0
    [  131.173666] init: plymouth-stop pre-start process (1530) terminated with status 1
    [  132.391281] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro,commit=0
    [  132.520553] EXT4-fs (sda8): re-mounted. Opts: commit=0

  2. #102
    Join Date
    Nov 2011
    Beans
    69

    Re: Mygica X8507

    Hola

    Muy bien, ya tienes soporte para tu placa de video.
    En cuanto a un mensaje tuyo anterior, te comento que nunca es tarde para estudiar. Puede llegar a parecer difícil y agotador, pero cuando uno lo mira con el conocimiento aprendido se da cuenta de que no era tanto.
    Espero que te recibas, que hayas aprobados tus exámenes y que empieces a estudiar C++ para que me ayudes a entender el código y así darle soporte a lo que falta de esta placa.

    No hace falta nada más ya esta funcionando tu placa. Eso sí ¿como hago para poder ver y escuchar?

    Por ejemplo, en tu caso tendrás que hacer lo siguiente:

    En una consola (Konsole) lanzar:

    tvtime -d /dev/video1

    Pero seguro que no escucharas nada, por lo que tendrás que lanzar en otro terminal el siguiente comando:

    arecord -D hw:3,0 -r 48000 -c 2 -f S16_LE | aplay -

    Es posible que tengas que cambiar hw:3,0 por hw:2,0
    Este hw:3,0 es el nuevo dispositivo de sonido que crea la placa de TV

    Si te lees el man de TVTime vas a poder controlar el sonido por ejemplo modificando el volumen general.

    Ahora viene mi "cacho de maldad", cada vez que cambies de kernel, vas a tener que compilar de nuevo con las fuentes de ese kernel. Y para se un poco más malo, no te va a hacer falta esto a partir del kernel 3.3 . Ayer me avisaron que a partir de ese kernel ya vendrá de serie el soporte.

    Gran saludo,

    Alfredo
    Last edited by alfredo_; November 27th, 2011 at 11:41 PM.

  3. #103
    Join Date
    Nov 2011
    Beans
    69

    Re: Mygica X8507

    Hola

    Hoy te puse que tenias que saber cual es el dispositivo de sonido


    Pero seguro que no escucharas nada, por lo que tendrás que lanzar en otro terminal el siguiente comando:

    arecord -D hw:3,0 -r 48000 -c 2 -f S16_LE | aplay -

    Es posible que tengas que cambiar hw:3,0 por hw:2,0
    Este hw:3,0 es el nuevo dispositivo de sonido que crea la placa de TV
    Bueno, es simple tenes que ejecutar en un terminal el siguiente comando y te lo va a decir.

    arecord -l

    Esto es lo que yo obtengo en mi PC:

    alfredo@dhcppc3:~> arecord -l
    **** List of CAPTURE Hardware Devices ****
    card 0: SB [HDA ATI SB], device 0: ALC889A Analog [ALC889A Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: SB [HDA ATI SB], device 1: ALC889A Digital [ALC889A Digital]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: SB [HDA ATI SB], device 2: ALC889A Analog [ALC889A Analog]
    Subdevices: 2/2
    Subdevice #0: subdevice #0
    Subdevice #1: subdevice #1
    card 2: SAA7134 [SAA7134], device 0: SAA7134 PCM [SAA7134 PCM]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 3: CX23885 [Conexant CX23885], device 0: CX23885 Digital [CX23885 Digital]
    Subdevices: 1/1
    Subdevice #0: subdevice #0

    alfredo@dhcppc3:~>

    Es por eso que yo pongo hw:3,0. Lo he puesto en negrita para que resalte y te des cuenta facilmente.
    Cuando inicies la TV si no escuchas sonido, anda levantando de apoco los controles de volumen del mezcaldor de sonido (por ejemplo Kmix, alsamixer o lo que utilices).

    Bueno espero más buenas noticias de parte tuya.

    Alfredo

  4. #104
    Join Date
    Nov 2011
    Beans
    69

    Re: Mygica X8507

    Para que vayas practicando puedes grabar tu programa favorito de tv con por ejemplo el siguiente comando:

    mencoder -noodml -tv driver=v4l2:device=/dev/video1:input=0:normid=8:freq=199,25:amode=1:width=720:height=568:fps=25.0:alsa:adevice=hw.3,0:amode=1:audiorate=48000:forceaudio:volume=100 tv:// -oac lavc -ovc lavc -of mpeg -mpegopts format=dvd -vf harddup,pp=lb -srate 48000 -af lavcresample=48000 -lavcopts vcodec=mpeg2video:vrc_buf_size=1835:vrc_maxrate=98 00:vbitrate=5000:keyint=15:acodec=mp2:abitrate=256 :aspect=4/3 -ofps 25 -endpos 01:30:00 -o /home/alfredo/miprograma.mpeg


    donde freq=199,25 es la frecuencia del canal que quieres que sintonice la placa y -endpos 01:30:00 es la cantidad de tiempo que quieres que grabe, en este caso una hora y media. He coloreado la sentencia para que lo encuentres fácilmente, no va en colores en la instrucción normal.
    Ojo que si haces copy y paste que no se te corte la sentencia.

    Es más si deseas que se grabe algo cuando no estás simplemente configuras el bios para que prenda la pc a la hora que quieras y luego configuras cron para que ejecute el comando anterior a la hora que lo desees y luego apage la pc.

    Saludos,

    Alfredo

  5. #105
    Join Date
    Jun 2011
    Location
    Buenos Aires, Argentina
    Beans
    81
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: Mygica X8507

    Hola
    Sonaba demasiado fácil
    Así estamos:
    Code:
    tvtime -d /dev/video1
    Ejecutando tvtime 1.0.2.
    Leyendo la configuración de /etc/tvtime/tvtime.xml
    Leyendo la configuración de /root/.tvtime/tvtime.xml
    No protocol specified
    xcommon: Cannot open display ':0'.
    ¿¿¿???

    En cuanto a lo del estudio, es más probable que primero aparezca el driver correspondiente a que yo aprenda a programar
    Saludos

  6. #106
    Join Date
    Nov 2011
    Beans
    69

    Re: Mygica X8507

    Hola

    ¿Provaste la otra manera que indique en uno de los primeros mensajes?

    mplayer tv://$channel -tv driver=v4l2:device=/dev/video1:width=720:height=568:chanlist=us-bcast:alsa:adevice=hw.3,0:amode=1:audiorate=48000: forceaudio:volume=100:immediatemode=0:norm=PAL-Nc

    ¿Y con VLC probaste?

    Saludos,

    Alfredo

  7. #107
    Join Date
    Jun 2011
    Location
    Buenos Aires, Argentina
    Beans
    81
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: Mygica X8507

    Me toma la cámara web y se me queda haciendo el famoso ruido de radio no sintonizada....

  8. #108
    Join Date
    Nov 2011
    Beans
    69

    Re: Mygica X8507

    Hola

    Quote Originally Posted by 53RG10 View Post
    Hola
    Sonaba demasiado fácil
    Así estamos:
    Code:
    tvtime -d /dev/video1
    Ejecutando tvtime 1.0.2.
    Leyendo la configuración de /etc/tvtime/tvtime.xml
    Leyendo la configuración de /root/.tvtime/tvtime.xml
    No protocol specified
    xcommon: Cannot open display ':0'.
    ¿¿¿???
    Este es un problema con Xorg o el controlador de pantalla, no tiene nada que ver con la placa de tv, almenos eso creo.

    Proba con xawtv, se te va a ver feo, pero es un principio, en general si amplias la ventana tirando de un extremo se mejora.

    Proba tambien el sonido.

    Alfredo

  9. #109
    Join Date
    Nov 2011
    Beans
    69

    Re: Mygica X8507

    Quote Originally Posted by 53RG10 View Post
    Me toma la cámara web y se me queda haciendo el famoso ruido de radio no sintonizada....
    Se más claro, porque no entiendo lo que me indicas.
    Poneme que comando estás utilizando, porque si usas xawtv -c /dev/video1 tendría que ver la tele, la otra es sacar la webcam, reiniciar y hacer las pruebas, luego que funcione mas o menos seguis con los problemas que aparezcan.

    Saludos,

    Alfredo

  10. #110
    Join Date
    Nov 2011
    Beans
    69

    Re: Mygica X8507

    Hola

    Code:
    tvtime -d /dev/video1
    Ejecutando tvtime 1.0.2.
    Leyendo la configuración de /etc/tvtime/tvtime.xml
    Leyendo la configuración de /root/.tvtime/tvtime.xml
    No protocol specified
    xcommon: Cannot open display ':0'.
    ¿¿¿???
    s
    Creo que el problema es que puedes estar ejecutando TVTime como root, si es así da este error. ejecuta TVTime como el usuario que eres en una "konsola".

    Saludos,

    Alfredo

Page 11 of 14 FirstFirst ... 910111213 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •