Results 1 to 3 of 3

Thread: Andretti steering wheel/pedals

  1. #1
    Join Date
    Jun 2011
    Beans
    1

    Andretti steering wheel/pedals

    I like driving games, and Torcs is good and playable with just the
    keyboard arrow keys. I installed VDrift, but it is unplayable with
    just the arrow keys, so thought I would try an old Andretti steering
    wheel/pedals setup. It has both USB and gameport connectors, but needs
    drivers for the gameport, which I very much doubt will be in existence
    for Ubuntu (the old Win98 drivers work with XP, and everything works fine
    there).With the USB, the wheel is recognised:
    $>lsusb
    Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 004 Device 002: ID 1241:1111 Belkin Mouse
    Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 002 Device 002: ID 0738:4420 Mad Catz, Inc.
    Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 001 Device 003: ID 05e3:0605 Genesys Logic, Inc. USB 2.0 Hub [ednet]
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

    VDrift, or Torcs will not recognise the wheel, but when I was trying to
    run jscal, the wheel and pedals, and buttons, reproduce the mouse
    movements and buttons! I have looked through what I can (I'm a linux
    re-newbie, played around in the mid 90s with it, but only with 10.04
    did I decide to use Linux as my main OS)but can't figure out if, or how,
    to tell the machine they are 2 different devices, and hopefully let me use
    them for playing.
    Hoping one of the smart cookies on here will make it look easy (and me silly!)
    Thanks!

  2. #2
    Join Date
    Apr 2013
    Beans
    1

    Re: Andretti steering wheel/pedals

    Mine's working, yay!
    No special drivers were installed (just the Trigger Rally game beforehand).
    jstest --normal /dev/input/js1
    Driver version is 2.1.0.
    Joystick (Ciponic Technology Mad Catz Andretti Racing Wheel) has 4 axes (X, Y, Hat0X, Hat0Y)
    and 4 buttons (Trigger, ThumbBtn, ThumbBtn2, TopBtn).
    Testing ... (interrupt to exit)
    Axes: 0: -1352 1: 0 2: 0 3: 0 Buttons: 0:off 1:off 2:off 3:off

    jscal -c /dev/input/js1
    Just follow the steps, the pedals are positive and negative values on one of the axes.

    And for the driving game Trigger Rally, per http://manpages.ubuntu.com/manpages/...trigger.6.html
    vi .trigger/trigger.config
    Change the keyboard enable to no, and the joystick enable to yes
    I also had to swap the + and - for forward and reverse.
    Last edited by rmattb; April 18th, 2013 at 06:33 AM.

  3. #3
    Join Date
    Jun 2007
    Location
    Porirua, New Zealand
    Beans
    Hidden!
    Distro
    Ubuntu

    Re: Andretti steering wheel/pedals

    If a post is older than a year or so and hasn't had a new reply in that time, instead of replying to it, create a new thread. In the software world, a lot can change in a very short time, and doing things this way makes it more likely that you will find the best information. You may link to the original discussion in the new thread if you think it may be helpful.
    Forum DOs and DON'Ts
    Never assume that information you find using a search engine is up-to-date.
    Please use CODE tags.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •