I'm not sure if this is the right place or not (too many possibilities), so I will post it here until I know otherwise. That being said... I use a notebook for work and require a secure place for files in case of theft. I had dev/sda6 for that purpose and I mounted it only when needed and it was encrypted with password.
Due to issues with file permissions, I had to re-install the OS. This time I do not have access to the dev/hda6 drive (owned as root) and get warnings when trying to unmount or encrypt it. I tried looking in the forums on the same issue, but I couldn't figure out how to correct it. If you don't mind helping, here is the info you need...
XXXXXX@XXXXXX:~$ sudo gedit /etc/fstab
# /etc/fstab: static file system information.
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
/dev/sda2 / ext3 errors=remount-ro 0 1
/dev/sda1 /boot ext3 defaults 0 2
/dev/sda6 /extra ext3 defaults 0 2
/dev/sda5 /home ext3 defaults 0 2
# swap was on /dev/sda3 during installation
UUID=17e7788a-a0ac-4fc0-87a5-4f9f2540582d none swap sw 0 0
XXXXXX@XXXXXX:~$ sudo fdisk -l
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000736e6
Device Boot Start End Blocks Id System
/dev/sda1 * 1 125 999424 83 Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2 125 2615 19999744 83 Linux
/dev/sda3 2615 3113 3999744 82 Linux swap / Solaris
/dev/sda4 3113 30402 219197441 5 Extended
/dev/sda5 3113 29779 214197266 83 Linux
/dev/sda6 29779 30402 4999168 83 Linux
XXXXXX@XXXXXX:~$ sudo blkid
/dev/sda3: UUID="17e7788a-a0ac-4fc0-87a5-4f9f2540582d" TYPE="swap"
/dev/sda1: UUID="872961b8-9008-4d8e-b294-bd6bbe1433fa" TYPE="ext3"
/dev/sda2: UUID="4b33c34d-9351-4f1c-b793-1aadb26753d4" TYPE="ext3"
/dev/sda5: UUID="04808f0e-19a2-4bb7-bd86-d029fbca89da" TYPE="ext3"
/dev/sda6: UUID="26ff86ea-11ed-4a91-a012-f687378916f5" TYPE="ext3"
Thanks in advance
Last edited by ABQskinhead; May 26th, 2011 at 04:07 PM.
Re: partition/encription issue
Ok, I figured it out. All I had to do was "#" comment out the /sda6 partition in the fstab file. I used the command "sudo gedit /etc/fstab" to achieve this. I then changed the partition ownership with "sudo nautilus" rebooted the system and mounted the partition manually. Using the Disk Utility I selected the option to reformat the /dev/sda6 partition. I selected the encryption button, entered a new pass-phrase and re-formatted the disk once again to enable the encryption. I can now mount and unmount manually and use that partition to secure my work.
Last edited by ABQskinhead; May 26th, 2011 at 04:32 PM.
Reason: Listed details
Tags for this Thread