I have built my ZBOX-AD02-U with 4gRam and 320g harddrive, and am using it atm to type this. So, wired works. But, I need wireless to work, as the box will be in my livingroom.
I installed both Ubuntu 10.10 32-bit and 11.04 64 bit with no success with the r8168 Wifi. It shows it is connected to my network, but it does no load anything. I have researched the Ubuntu forums and thought I would find an answer, but have had no success.
I need to know if there is a way to get this to work, or have this disabled somehow so that I can get a wireless connection to my router.
lspci =
modinfo r8168 =Code:00:00.0 Host bridge: Advanced Micro Devices [AMD] Pavilion DM1Z-3000 Host bridge 00:01.0 VGA compatible controller: ATI Technologies Inc Device 9802 00:01.1 Audio device: ATI Technologies Inc Device 1314 00:04.0 PCI bridge: Advanced Micro Devices [AMD] Device 1512 00:11.0 SATA controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] (rev 40) 00:12.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 42) 00:14.1 IDE interface: ATI Technologies Inc SB7x0/SB8x0/SB9x0 IDE Controller (rev 40) 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40) 00:14.3 ISA bridge: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller (rev 40) 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40) 00:14.5 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller 00:15.0 PCI bridge: ATI Technologies Inc Device 43a0 00:15.2 PCI bridge: ATI Technologies Inc Device 43a2 00:15.3 PCI bridge: ATI Technologies Inc Device 43a3 00:16.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:16.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 0 (rev 43) 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 1 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 2 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 3 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 4 00:18.5 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 6 00:18.6 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 5 00:18.7 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 7 03:00.0 Network controller: Ralink corp. RT2860 06:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) 07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
Any help with be greatly appreciated.Code:filename: /lib/modules/2.6.38-8-generic/kernel/drivers/net/r8168.ko version: 8.023.00-NAPI license: GPL description: RealTek RTL-8168 Gigabit Ethernet driver author: Realtek and the Linux r8168 crew <netdev@vger.kernel.org> srcversion: 8234C7235B5D2A2B5E41CB6 alias: pci:v000010ECd00008168sv*sd*bc*sc*i* depends: vermagic: 2.6.38-8-generic SMP mod_unload modversions parm: eee_enable:int parm: speed:force phy operation. Deprecated by ethtool (8). (array of int) parm: duplex:force phy operation. Deprecated by ethtool (8). (array of int) parm: autoneg:force phy operation. Deprecated by ethtool (8). (array of int) parm: rx_copybreak:Copy breakpoint for copy-only-tiny-frames (int) parm: use_dac:Enable PCI DAC. Unsafe on 32 bit PCI slot. (int) parm: debug:Debug verbosity level (0=none, ..., 16=all) (int)
Bookmarks