Page 6 of 8 FirstFirst ... 45678 LastLast
Results 51 to 60 of 79

Thread: Ralink RT5390 in 11.04

  1. #51
    Join Date
    Nov 2012
    Beans
    19

    Re: Ralink RT5390 in 11.04

    I downloaded file for Your link, but all the same errors.
    How You think, if i will reinstall system, it maybe help?


    command lspci return
    Code:
    00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
    00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
    00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04)
    00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04)
    00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04)
    00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4)
    00:1c.2 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 3 (rev c4)
    00:1c.3 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 4 (rev c4)
    00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04)
    00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04)
    00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04)
    00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04)
    01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 07)
    02:00.0 Network controller: Ralink corp. Device 539a
    03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5229 (rev 01
    command ifconfig return


    Code:
    eth0      Link encap:Ethernet  HWaddr b4:b5:2f:29:bb:b1  
              inet addr:192.168.1.3  Bcast:192.168.1.255  Mask:255.255.255.0
              inet6 addr: fe80::b6b5:2fff:fe29:bbb1/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:41456 errors:0 dropped:0 overruns:0 frame:0
              TX packets:23002 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000 
              RX bytes:61745539 (61.7 MB)  TX bytes:1734354 (1.7 MB)
              Interrupt:41 Base address:0xa000 
    
    lo        Link encap:Локальная петля (Loopback)  
              inet addr:127.0.0.1  Mask:255.0.0.0
              inet6 addr: ::1/128 Scope:Host
              UP LOOPBACK RUNNING  MTU:16436  Metric:1
              RX packets:157 errors:0 dropped:0 overruns:0 frame:0
              TX packets:157 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0 
              RX bytes:17447 (17.4 KB)  TX bytes:17447 (17.4 KB)
    command iwconfig return
    Code:
    lo        no wireless extensions.
    
    wlan0     IEEE 802.11bgn  ESSID:off/any  
              Mode:Managed  Access Point: Not-Associated   Tx-Power=off   
              Retry  long limit:7   RTS thr:off   Fragment thr:off
              Encryption key:off
              Power Management:off
              
    eth0      no wireless extensions.
    Last edited by columb; November 17th, 2012 at 12:51 AM.

  2. #52
    Join Date
    Nov 2012
    Beans
    19

    Re: Ralink RT5390 in 11.04

    I reinstalled OS, but no change. What calls errors where i do command "make"?

  3. #53
    Join Date
    Aug 2005
    Location
    South Carolina, USA
    Beans
    19,882
    Distro
    Ubuntu 14.04 Trusty Tahr

    Re: Ralink RT5390 in 11.04

    It will be very helpful for you to post the exact wording of the errors.
    "Oh, Ubuntu, you are my favorite Linux-based operating system" --Dr. Sheldon Cooper, Ph.D.

  4. #54
    Join Date
    Nov 2012
    Beans
    19

    Re: Ralink RT5390 in 11.04

    Quote Originally Posted by chili555 View Post
    It will be very helpful for you to post the exact wording of the errors.
    I think I found a bug, but I do not know how to fix it.
    If I change value in the file HAS_ANTENNA_DIVERSITY_SUPPORT=n on HAS_ANTENNA_DIVERSITY_SUPPORT=y errors appear. but if I leave the value HAS_ANTENNA_DIVERSITY_SUPPORT=n no errors.

    CC [M] /home/hp650/rt/os/linux/../../chips/rtmp_chip.o
    /home/hp650/rt/os/linux/../../chips/rtmp_chip.c: In function ‘HWAntennaDiversityEnable’:
    /home/hp650/rt/os/linux/../../chips/rtmp_chip.c:2010:2: error: ‘regs’ undeclared (first use in this function)
    /home/hp650/rt/os/linux/../../chips/rtmp_chip.c:2010:2: note: each undeclared identifier is reported only once for each function it appears in
    make[2]: *** [/home/hp650/rt/os/linux/../../chips/rtmp_chip.o] Error 1
    make[1]: *** [_module_/home/hp650/rt/os/linux] Error 2
    make[1]: Leaving directory `/usr/src/linux-headers-3.2.0-29-generic-pae'
    make: *** [LINUX] Error 2

    I found a file with an error.
    This is the part where the error occurs

    Code:
    VOID HWAntennaDiversityEnable(
    	IN PRTMP_ADAPTER		pAd)
    {
    	UINT8 BBPValue = 0, RFValue = 0;
    
    	/* RF_R29 bit[7:6] = b'11 */
    	RT30xxReadRFRegister(pAd, RF_R29, &RFValue);
    	RFValue |= 0xC0; /* rssi_gain */
    	RT30xxWriteRFRegister(pAd, RF_R29, RFValue);
    
    	/* BBP_R47 bit7=1 */
    	RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R47, &BBPValue);
    	BBPValue |= 0x80; /* ADC6 on */
    	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R47, BBPValue);
    	
    	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R150, regs[0]); /* ENABLE_ANTSW_OFDM and RSSI_ANTSWT */
    	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R151, regs[1]); /* ENABLE_ANTSW_CCK and RSSI_LNASWTH_HM */
    	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R152, regs[2]); /* RSSI_LNASWTH_HL */
    	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R153, regs[3]); /* RSSI_ANALOG_LOWTH */
    	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R154, regs[4]); /* ANTSW_PWROFFSET, ANTSW_DELAYOFFSET and auto-control BBP R152[7] (RX_DEFAULT_ANT) */
    	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R155, regs[5]); /* RSSI_OFFSET */
    	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R253, regs[6]); /* MEASURE_RSSI_OFFSET */
    
    	DBGPRINT(RT_DEBUG_OFF, ("HwAnDiv --> Enable!\n"));
    }


    /home/hp650/rt/os/linux/../../chips/rtmp_chip.c: In function ‘HWAntennaDiversityEnable’:
    /home/hp650/rt/os/linux/../../chips/rtmp_chip.c:2010:2: error: ‘regs’ undeclared (first use in this function)

  5. #55
    Join Date
    Nov 2012
    Beans
    19

    Re: Ralink RT5390 in 11.04

    But I also found driver for openSUSE. I converted to .deb and installed it. But no changed. Maybe some things wrong in a driver PCIe 2860sta?
    Last edited by columb; November 19th, 2012 at 07:53 PM.

  6. #56
    Join Date
    Aug 2005
    Location
    South Carolina, USA
    Beans
    19,882
    Distro
    Ubuntu 14.04 Trusty Tahr

    Re: Ralink RT5390 in 11.04

    Ah, ha! Now I see why it errored out for you but not me. Igenerally don't make all those changes before I compile. I assume, I see now incorrectly, that it will compile.

    I don't see HAS_ANTENNA_DIVERSITY_SUPPORT=y mentioned in the README. I wonder if it's really needed. Did you try compiling and installing the driver without the change?

    Did you also blacklist rt2800pci?
    "Oh, Ubuntu, you are my favorite Linux-based operating system" --Dr. Sheldon Cooper, Ph.D.

  7. #57
    Join Date
    Nov 2012
    Beans
    19

    Re: Ralink RT5390 in 11.04

    Quote Originally Posted by chili555 View Post
    Did you try compiling and installing the driver without the change?
    Yes, no change. How can i do blacklist rt2800pci?

  8. #58
    Join Date
    Aug 2005
    Location
    South Carolina, USA
    Beans
    19,882
    Distro
    Ubuntu 14.04 Trusty Tahr

    Re: Ralink RT5390 in 11.04

    Quote Originally Posted by columb View Post
    Yes, no change. How can i do blacklist rt2800pci?
    Please do:
    Code:
    sudo su
    echo "blacklist rt2800pci" >> /etc/modprobe.d/blacklist.conf
    echo rt5390sta >> /etc/modules
    exit
    Reboot and tell us how it's working.
    "Oh, Ubuntu, you are my favorite Linux-based operating system" --Dr. Sheldon Cooper, Ph.D.

  9. #59
    Join Date
    Nov 2012
    Beans
    19

    Re: Ralink RT5390 in 11.04

    Quote Originally Posted by chili555 View Post
    Please do:
    Code:
    sudo su
    echo "blacklist rt2800pci" >> /etc/modprobe.d/blacklist.conf
    echo rt5390sta >> /etc/modules
    exit
    Reboot and tell us how it's working.
    No change and when i executed command iwconfig it showed

    iwconfig

    Code:
    lo        no wireless extensions.
    
    eth0      no wireless extensions.
    how do you see it's gone

    Code:
    wlan0     IEEE 802.11bgn  ESSID:off/any  
              Mode:Managed  Access Point: Not-Associated   Tx-Power=off   
              Retry  long limit:7   RTS thr:off   Fragment thr:off
              Encryption key:off
              Power Management:off
    In my laptop Wi fi enabled through a combination of Fn +12. When he was off the amber light, and when it is on white. Previously, the system saw the device, I still could not turn the key combination Wi fi.
    Now I can not see even the device, and it has seen before.
    I have now is two systems: Ubuntu and windows 7. On win7 wifi works very well. I do not understand the reason in ubuntu.

  10. #60
    Join Date
    Aug 2005
    Location
    South Carolina, USA
    Beans
    19,882
    Distro
    Ubuntu 14.04 Trusty Tahr

    Re: Ralink RT5390 in 11.04

    I still could not turn the key combination Wi fi.
    Let's see:
    Code:
    rfkill list all
    "Oh, Ubuntu, you are my favorite Linux-based operating system" --Dr. Sheldon Cooper, Ph.D.

Page 6 of 8 FirstFirst ... 45678 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •