Please help with xorg.conf

[Joe Ker1086]

Okay, I have been fighting with this for hours......I gave up a couple weeks ago but decided to try again o set up xorg.conf with a 1920x1080 resolution. I feel like the file is right but I am getting some strange options when going in to change the resolution (like 1920x540). Right now i is set to 1024x768 but I know my graphics card and tv can do better. Here is my xorg.conf file, PLEASE help if you can

Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	ModulePath   "/usr/lib/xorg/modules"
	FontPath     "/usr/share/fonts/X11/misc"
	FontPath     "/usr/share/fonts/X11/cyrillic"
	FontPath     "/usr/share/fonts/X11/100dpi/:unscaled"
	FontPath     "/usr/share/fonts/X11/75dpi/:unscaled"
	FontPath     "/usr/share/fonts/X11/Type1"
	FontPath     "/usr/share/fonts/X11/100dpi"
	FontPath     "/usr/share/fonts/X11/75dpi"
	FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
	FontPath     "built-ins"
EndSection

Section "Module"
	Load  "dri"
	Load  "extmod"
	Load  "glx"
	Load  "dri2"
	Load  "record"
	Load  "dbe"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
	#DisplaySize	  400   300	# mm
	Identifier   "Monitor0"
	VendorName   "RCA"
	ModelName    "RCA"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"            	# [<bool>]
        #Option     "SWcursor"           	# [<bool>]
        #Option     "Dac6Bit"            	# [<bool>]
        #Option     "Dac8Bit"            	# [<bool>]
        #Option     "BusType"            	# [<str>]
        #Option     "CPPIOMode"          	# [<bool>]
        #Option     "CPusecTimeout"      	# <i>
        #Option     "AGPMode"            	# <i>
        #Option     "AGPFastWrite"       	# [<bool>]
        #Option     "AGPSize"            	# <i>
        #Option     "GARTSize"           	# <i>
        #Option     "RingSize"           	# <i>
        #Option     "BufferSize"         	# <i>
        #Option     "EnableDepthMoves"   	# [<bool>]
        #Option     "EnablePageFlip"     	# [<bool>]
        #Option     "NoBackBuffer"       	# [<bool>]
        #Option     "DMAForXv"           	# [<bool>]
        #Option     "FBTexPercent"       	# <i>
        #Option     "DepthBits"          	# <i>
        #Option     "PCIAPERSize"        	# <i>
        #Option     "AccelDFS"           	# [<bool>]
        #Option     "IgnoreEDID"         	# [<bool>]
        #Option     "DisplayPriority"    	# [<str>]
        #Option     "PanelSize"          	# [<str>]
        #Option     "ForceMinDotClock"   	# <freq>
        #Option     "ColorTiling"        	# [<bool>]
        #Option     "VideoKey"           	# <i>
        #Option     "RageTheatreCrystal" 	# <i>
        #Option     "RageTheatreTunerPort" 	# <i>
        #Option     "RageTheatreCompositePort" 	# <i>
        #Option     "RageTheatreSVideoPort" 	# <i>
        #Option     "TunerType"          	# <i>
        #Option     "RageTheatreMicrocPath" 	# <str>
        #Option     "RageTheatreMicrocType" 	# <str>
        #Option     "ScalerWidth"        	# <i>
        #Option     "RenderAccel"        	# [<bool>]
        #Option     "SubPixelOrder"      	# [<str>]
        #Option     "ShowCache"          	# [<bool>]
        #Option     "ClockGating"        	# [<bool>]
        #Option     "VGAAccess"          	# [<bool>]
        #Option     "ReverseDDC"         	# [<bool>]
        #Option     "LVDSProbePLL"       	# [<bool>]
        #Option     "AccelMethod"        	# <str>
        #Option     "DRI"                	# [<bool>]
        #Option     "ConnectorTable"     	# <str>
        #Option     "DefaultConnectorTable" 	# [<bool>]
        #Option     "DefaultTMDSPLL"     	# [<bool>]
        #Option     "TVDACLoadDetect"    	# [<bool>]
        #Option     "ForceTVOut"         	# [<bool>]
        #Option     "TVStandard"         	# <str>
        #Option     "IgnoreLidStatus"    	# [<bool>]
        #Option     "DefaultTVDACAdj"    	# [<bool>]
        #Option     "Int10"              	# [<bool>]
        #Option     "EXAVSync"           	# [<bool>]
        #Option     "ATOMTVOut"          	# [<bool>]
        #Option     "R4xxATOM"           	# [<bool>]
        #Option     "ForceLowPowerMode"  	# [<bool>]
        #Option     "DynamicPM"          	# [<bool>]
	Identifier  "Card0"
	Driver      "radeon"
	VendorName  "ATI Technologies Inc"
	BoardName   "RV380 [Radeon X600 (PCIE)]"
	BusID       "PCI:2:0:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	DefaultDepth 24 
	SubSection "Display"
		Viewport   0 0
		Depth     1
		Modes 	  "1920x1080" "1400x900" "1024x768" "800x600"
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
		Modes	  "1920x1080" "1400x900" "1024x768" "800x600"
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
		Modes	  "1920x1080" "1400x900" "1024x768" "800x600"
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
		Modes	  "1920x1080" "1400x900" "1024x768" "800x600"
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
		Modes 	  "1920x1080" "1400x900" "1024x768" "800x600"
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
		Modes	  "1920x1080" "1400x900" "1024x768" "800x600"
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth	  32
		Modes	  "1920x1080" "1400x900" "1024x768" "800x600"
	EndSubSection
EndSection

[Krytarik]

Try to set your resolution by following this guide:
https://wiki.ubuntu.com/X/Config/Resolution

- either the "xorg.conf" way, since you did already set one up

- or the "xrandr" way, generally easier:

I assume you are using XDM as display manager?
I don't know right now where to place the xrandr commands to be run at startup of XDM.
But you could at least place them into "~/.xprofile", see the guide about the disadvantages of this.