I have hte K3805-Z and am trying to get it to work....it seems to be recognised by the Network Manager....but I am not getting through.

usb-devices yields the following:

T: Bus=02 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 11 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=02(commc) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=19d2 ProdID=1003 Rev=00.01
S: Manufacturer=Vodafone
S: Product=K3805-z
S: SerialNumber=C7986D8B72DFB07EF2FAE8645D14803D06F92 E84
C: #Ifs=10 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 0 Cls=02(commc) Sub=08 Prot=00 Driver=(none)
I: If#= 1 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=01 Driver=cdc_acm
I: If#= 2 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_acm
I: If#= 3 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=01 Driver=cdc_acm
I: If#= 4 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_acm
I: If#= 5 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
I: If#= 6 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I: If#= 7 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
/usr/bin/usb-devices: line 79: printf: 08: invalid octal number
I: If#= 0 Alt= 0 #EPs= 0 Cls=02(commc) Sub=0b Prot=00 Driver=(none)
/usr/bin/usb-devices: line 79: printf: 09: invalid octal number
I: If#= 0 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=(none)

Where do I go from here?