Epson L100

[arvin555]

Just wanted to share this info I just read:

http://www.omgubuntu.co.uk/2011/04/u...iver-download/

Apparently Epson woke up and will now hopefully have one of the most convenient driver support for Linux amongst Printer makers. We just have to first update to Ubuntu 11.04.

Wonder why we can't just add a Distro for our older Ubuntu versions?

TTFN
Arvin

[anezch]

Hi, anyone tried to refill the ink without Epson monitoring app in MS Windows?

[galerie]

Hai

I've just installed a new printer : Epson L100, but I can't find any linux driver suitable for this printing machine. I've tried to see openprinting, but no luck so far..

My question :
1. Is this printer already supported in Linux (especially Ubuntu) ?
2. Anyone know some alternatives for printing driver ?

If you need more info regarding this printer, I'm happy to help.
You can see this printer here :
http://www.epson.co.id/epson_indones...ame=Epson_L100

In the meantime, I've done the 'lsusb -v' command and the result:

Bus 003 Device 002: ID 04b8:001b Seiko Epson Corp. 
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x04b8 Seiko Epson Corp.
  idProduct          0x001b 
  bcdDevice            1.00
  iManufacturer           1 EPSON
  iProduct                2 EPSON L100 Series
  iSerial                 3 NLUK013539        
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           32
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xc0
      Self Powered
    MaxPower                2mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         7 Printer
      bInterfaceSubClass      1 Printer
      bInterfaceProtocol      2 Bidirectional
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x04  EP 4 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x85  EP 5 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
Device Status:     0x0001
  Self Powered

SOLUTION

For Epson L100

Please download the following driver :

http://linux.avasys.jp/drivers/lsb/e...sb3.2_i386.deb

Disconnect the Epson L100 / L200 USB printer cable, install the driver, then connect the cable -> push start button

It will try to search the driver but no luck, just "cancel" it.

Then in "Choose Driver", make sure you tick the "Select printer form database"

choose [Epson] -> [Stylus N10 N11] -> [Forward] -> [Apply] -> give any names if necessary. Done.

For Epson 200

Same as the above for L100, with additional files for scanning to download i.e. :

the data

http://linux.avasys.jp/drivers/iscan....8.0-0_all.deb

and the core

http://linux.avasys.jp/drivers/iscan...ltdl7_i386.deb

Install it and restart Ubuntu

You can print and scan now ... For scanning, just use xsane or any other scan s/w.

note:for the core files, you have to make sure, what types of processor (CPU) you're running and Ubuntu version.
Please go to this site : http://www.avasys.jp/lx-bin2/linux_e/spc/DL1.do to change (just scroll down the page until you see "L200", tick it and choose whatever Linux and its version). My system now running Ubuntu 9.04 with 32bit Intel-based CPU

That's all, hope it help.

what if it is a network printer is this work too? Sorry or my bad english, since u told that u use epson l-200 I assumed that u came from indonesia.than I should try asking question in indonesian
Q: kalau mw connect ke printer l200 yang ada di jaringan gimana caranya gan?
baru 2 hari make ubuntu masih bingung

[AlexanderDGreat]

Guys, why does it always have to be damn tiring and plain old difficult for Ubuntu?

Our life is short.

Just use VirtualBox, install Windows, and install the printer there!

[galerie]

Guys, why does it always have to be damn tiring and plain old difficult for Ubuntu?

Our life is short.

Just use VirtualBox, install Windows, and install the printer there!

yep.. for me as a truly noob to linux, it may help. but what if I install ubuntu on my old computer?
I am talking bout resources. does virtual need a lot of resources? if it does than I should find another option T_T. cause I have an old rig in my room and I want to install ubuntu on it.

[mehersanjeev]

thanks

[mehersanjeev]

what if it is a network printer is this work too? Sorry or my bad english, since u told that u use epson l-200 I assumed that u came from indonesia.than I should try asking question in indonesian
Q: kalau mw connect ke printer l200 yang ada di jaringan gimana caranya gan?
baru 2 hari make ubuntu masih bingung

Originally Posted by akuhon
Hai

I've just installed a new printer : Epson L100, but I can't find any linux driver suitable for this printing machine. I've tried to see openprinting, but no luck so far..

My question :
1. Is this printer already supported in Linux (especially Ubuntu) ?
2. Anyone know some alternatives for printing driver ?

If you need more info regarding this printer, I'm happy to help.
You can see this printer here :
http://www.epson.co.id/epson_indones...ame=Epson_L100

In the meantime, I've done the 'lsusb -v' command and the result:


Its working now properly

thanks

[akuhon]

what if it is a network printer is this work too? Sorry or my bad english, since u told that u use epson l-200 I assumed that u came from indonesia.than I should try asking question in indonesian
Q: kalau mw connect ke printer l200 yang ada di jaringan gimana caranya gan?
baru 2 hari make ubuntu masih bingung

You need time to learn ...
Just go to System -> Admin -> Printing. Add Printer -> Networked Printer .... Fill out the ip address of the computer, where the printer attached.

OK...

[Jetset Funky]

Hai

I've just installed a new printer : Epson L100, but I can't find any linux driver suitable for this printing machine. I've tried to see openprinting, but no luck so far..

My question :
1. Is this printer already supported in Linux (especially Ubuntu) ?
2. Anyone know some alternatives for printing driver ?

If you need more info regarding this printer, I'm happy to help.
You can see this printer here :
http://www.epson.co.id/epson_indones...ame=Epson_L100

In the meantime, I've done the 'lsusb -v' command and the result:

Bus 003 Device 002: ID 04b8:001b Seiko Epson Corp. 
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x04b8 Seiko Epson Corp.
  idProduct          0x001b 
  bcdDevice            1.00
  iManufacturer           1 EPSON
  iProduct                2 EPSON L100 Series
  iSerial                 3 NLUK013539        
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           32
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xc0
      Self Powered
    MaxPower                2mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         7 Printer
      bInterfaceSubClass      1 Printer
      bInterfaceProtocol      2 Bidirectional
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x04  EP 4 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x85  EP 5 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
Device Status:     0x0001
  Self Powered

SOLUTION

For Epson L100

Please download the following driver :

http://linux.avasys.jp/drivers/lsb/e...sb3.2_i386.deb
If the link doesn't work go to :
http://avasys.jp/eng/linux_driver/do...n-inkjet/escp/
then, scroll down until you find Stylus N10 or Stylus N11.
Download the driver according your system (32 bit or 64bit)

Disconnect the Epson L100 / L200 USB printer cable, install the driver, then connect the cable -> push start button

It will try to search the driver but no luck, just "cancel" it.

Then in "Choose Driver", make sure you tick the "Select printer form database"

choose [Epson] -> [Stylus N10 N11] -> [Forward] -> [Apply] -> give any names if necessary. Done.

For Epson 200

Same as the above for L100, with additional files for scanning to download i.e. :

the data

http://linux.avasys.jp/drivers/iscan....8.0-0_all.deb

and the core

http://linux.avasys.jp/drivers/iscan...ltdl7_i386.deb

Install it and restart Ubuntu

You can print and scan now ... For scanning, just use xsane or any other scan s/w.

note:for the core files, you have to make sure, what types of processor (CPU) you're running and Ubuntu version.
Please go to this site : http://www.avasys.jp/lx-bin2/linux_e/spc/DL1.do to change (just scroll down the page until you see "L200", tick it and choose whatever Linux and its version). My system now running Ubuntu 9.04 with 32bit Intel-based CPU

That's all, hope it help.

Thanks, work nicely for me on BT5R2

[rudregues]

Hey guys, I'm installing those drivers on my new L200, but I've found this notice:

"Notice on transferring the responsibility of Linux Driver Download Website
Regarding our Linux driver download service, we will transfer the service from AVASYS CORPORATION to SEIKO EPSON CORPORATION on Thursday, December 22nd, 2011 (0:00 JST).
After the transfer, the download service is available in the following website."
source: http://avasys.jp/eng/linux_driver/


There is more updated drivers in this website

Searching by L200, will give you this as result.

I'll now restart my system with the new drivers installed then test my printer.

[ ]'s