I've been trying to install the linux driver for line6 devices.
here are a few links:
http://www.tanzband-scream.at/line6/
http://www.tanzband-scream.at/line6/INSTALL
when following the install instructions I get a lot of errors. and I'm not sure the installation is successful for there is no new soundcard available in the soundsettings menu.
any ideas?
thanks!!
first I installed RPMbuild:
then I tried the rpmbuild instruction which was unsuccessful, followed by a source installation :Code:jeroen@jeroen-Ubuntu:~$ rpmbuild -tb /home/jeroen/Downloads/line6usb-0.8.1.tar.bz2 The program 'rpmbuild' is currently not installed. You can install it by typing: sudo apt-get install rpm jeroen@jeroen-Ubuntu:~$ sudo apt-bet install rpm [sudo] password for jeroen: sudo: apt-bet: command not found jeroen@jeroen-Ubuntu:~$ sudo apt-get install rpm Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: linux-headers-2.6.35-22 linux-headers-2.6.35-22-generic Use 'apt-get autoremove' to remove them. The following extra packages will be installed: librpm1 librpmbuild1 librpmio1 rpm-common rpm2cpio Suggested packages: alien elfutils rpm-i18n The following NEW packages will be installed: librpm1 librpmbuild1 librpmio1 rpm rpm-common rpm2cpio 0 upgraded, 6 newly installed, 0 to remove and 0 not upgraded. Need to get 4,661kB of archives. After this operation, 5,816kB of additional disk space will be used. Do you want to continue [Y/n]? y Get:1 http://be.archive.ubuntu.com/ubuntu/ maverick/main librpmio1 i386 4.8.1-5 [770kB] Get:2 http://be.archive.ubuntu.com/ubuntu/ maverick/main rpm-common i386 4.8.1-5 [714kB] Get:3 http://be.archive.ubuntu.com/ubuntu/ maverick/main librpm1 i386 4.8.1-5 [876kB] Get:4 http://be.archive.ubuntu.com/ubuntu/ maverick/main librpmbuild1 i386 4.8.1-5 [761kB] Get:5 http://be.archive.ubuntu.com/ubuntu/ maverick/main rpm2cpio i386 4.8.1-5 [699kB] Get:6 http://be.archive.ubuntu.com/ubuntu/ maverick/main rpm i386 4.8.1-5 [839kB] Fetched 4,661kB in 4s (1,032kB/s) Selecting previously deselected package librpmio1. (Reading database ... 143092 files and directories currently installed.) Unpacking librpmio1 (from .../librpmio1_4.8.1-5_i386.deb) ... Selecting previously deselected package rpm-common. Unpacking rpm-common (from .../rpm-common_4.8.1-5_i386.deb) ... Selecting previously deselected package librpm1. Unpacking librpm1 (from .../librpm1_4.8.1-5_i386.deb) ... Selecting previously deselected package librpmbuild1. Unpacking librpmbuild1 (from .../librpmbuild1_4.8.1-5_i386.deb) ... Selecting previously deselected package rpm2cpio. Unpacking rpm2cpio (from .../rpm2cpio_4.8.1-5_i386.deb) ... Selecting previously deselected package rpm. Unpacking rpm (from .../archives/rpm_4.8.1-5_i386.deb) ... Processing triggers for man-db ... Setting up librpmio1 (4.8.1-5) ... Setting up rpm-common (4.8.1-5) ... Setting up librpm1 (4.8.1-5) ... Setting up librpmbuild1 (4.8.1-5) ... Setting up rpm2cpio (4.8.1-5) ... Setting up rpm (4.8.1-5) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place
afterwards tried some things, also unsuccessful..Code:jeroen@jeroen-Ubuntu:~$ rpmbuild -tb /home/jeroen/Downloads/line6usb-0.8.1.tar.bz2 error: Failed build dependencies: kernel-source is needed by line6usb-0.8.1-1.i386 jeroen@jeroen-Ubuntu:~$ cd /home/jeroen/Downloads/line6usb-0.8.1 jeroen@jeroen-Ubuntu:~/Downloads/line6usb-0.8.1$ make install ./set_revision.sh make -f Makefile -C /lib/modules/2.6.35-22-generic/build CONFIG_LINE6_USB=m SUBDIRS=/home/jeroen/Downloads/line6usb-0.8.1 modules make[1]: Entering directory `/usr/src/linux-headers-2.6.35-22-generic' CC [M] /home/jeroen/Downloads/line6usb-0.8.1/audio.o /home/jeroen/Downloads/line6usb-0.8.1/audio.c: In function ‘line6_init_audio’: /home/jeroen/Downloads/line6usb-0.8.1/audio.c:31: error: implicit declaration of function ‘snd_card_new’ /home/jeroen/Downloads/line6usb-0.8.1/audio.c:31: warning: assignment makes pointer from integer without a cast make[2]: *** [/home/jeroen/Downloads/line6usb-0.8.1/audio.o] Error 1 make[1]: *** [_module_/home/jeroen/Downloads/line6usb-0.8.1] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-2.6.35-22-generic' make: *** [default] Error 2 jeroen@jeroen-Ubuntu:~/Downloads/line6usb-0.8.1$ modprobe line6usb FATAL: Error inserting line6usb (/lib/modules/2.6.35-22-generic/kernel/drivers/staging/line6/line6usb.ko): Operation not permitted
Code:jeroen@jeroen-Ubuntu:~/Downloads/line6usb-0.8.1$ cd .. jeroen@jeroen-Ubuntu:~/Downloads$ rpmbuild -tb line6usb-0.8.1.tar.bz2 error: Failed build dependencies: kernel-source is needed by line6usb-0.8.1-1.i386 jeroen@jeroen-Ubuntu:~/Downloads$ rpmbuild -tb reamping-0.1-1.i586.rpm.del error: Failed to read spec file from reamping-0.1-1.i586.rpm.del jeroen@jeroen-Ubuntu:~/Downloads$ rpm -U reamping-0.1-1.i586.rpm.del rpm: RPM should not be used directly install RPM packages, use Alien instead! rpm: However assuming you know what you are doing... error: Failed dependencies: /bin/sh is needed by reamping-0.1-1.i586 libasound.so.2 is needed by reamping-0.1-1.i586 libasound.so.2(ALSA_0.9) is needed by reamping-0.1-1.i586 libasound.so.2(ALSA_0.9.0rc4) is needed by reamping-0.1-1.i586 libc.so.6 is needed by reamping-0.1-1.i586 libc.so.6(GLIBC_2.0) is needed by reamping-0.1-1.i586 libc.so.6(GLIBC_2.1.3) is needed by reamping-0.1-1.i586 libgcc_s.so.1 is needed by reamping-0.1-1.i586 libgcc_s.so.1(GCC_3.0) is needed by reamping-0.1-1.i586 libgcc_s.so.1(GLIBC_2.0) is needed by reamping-0.1-1.i586 libm.so.6 is needed by reamping-0.1-1.i586 libsndfile.so.1 is needed by reamping-0.1-1.i586 libsndfile.so.1(libsndfile.so.1.0) is needed by reamping-0.1-1.i586 libstdc++.so.5 is needed by reamping-0.1-1.i586 libstdc++.so.5(CXXABI_1.2) is needed by reamping-0.1-1.i586 libstdc++.so.5(GLIBCPP_3.2) is needed by reamping-0.1-1.i586 libsysfs.so.1 is needed by reamping-0.1-1.i586 jeroen@jeroen-Ubuntu:~/Downloads$ sudo apt-get install Alien [sudo] password for jeroen: Sorry, try again. [sudo] password for jeroen: Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package Alien
Adv Reply
Bookmarks