laptop internal speakers don't work

[bngsudheer]

The laptop model is HP Compaq CQ50.


Here's the output of lspci:

00:00.0 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory Controller (rev a2)
00:01.0 ISA bridge: nVidia Corporation Device 075e (rev a2)
00:01.1 SMBus: nVidia Corporation MCP78S [GeForce 8200] SMBus (rev a1)
00:01.3 Co-processor: nVidia Corporation MCP78S [GeForce 8200] Co-Processor (rev a2)
00:01.4 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory Controller (rev a1)
00:02.0 USB Controller: nVidia Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller (rev a1)
00:02.1 USB Controller: nVidia Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller (rev a1)
00:04.0 USB Controller: nVidia Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller (rev a1)
00:04.1 USB Controller: nVidia Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller (rev a1)
00:06.0 IDE interface: nVidia Corporation MCP78S [GeForce 8200] IDE (rev a1)
00:07.0 Audio device: nVidia Corporation MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio (rev a1)
00:08.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge (rev a1)
00:09.0 IDE interface: nVidia Corporation MCP78S [GeForce 8200] SATA Controller (non-AHCI mode) (rev a2)
00:0a.0 Ethernet controller: nVidia Corporation MCP77 Ethernet (rev a2)
00:0b.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge (rev a1)
00:14.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge (rev a1)
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor HyperTransport Configuration (rev 40)
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor Link Control
02:00.0 VGA compatible controller: nVidia Corporation C77 [GeForce 8200M G] (rev a2)
07:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)

The sound works if I connect an external speaker to the jack. But the internal speakers don't work.

I have made sure sound is not muted and raised the controls in sound preferences, alsamixer and gnome-alsamixer.

This is on Ubuntu 10.10. Output of uname -a:

Linux tilo 2.6.35-24-generic #42-Ubuntu SMP Thu Dec 2 01:41:57 UTC 2010 i686 GNU/Linux

How can I fix this problem?

[lidex]

Use the alsa-info-script to provide detailed information.
Run this command in a terminal:

wget http://www.alsa-project.org/alsa-info.sh -O alsa-info.sh && bash alsa-info.sh

Choose the upload option and provide a link for the output.
[Terminal="Applications->Accessories->Terminal"]

[bngsudheer]

Here's the info:

http://www.alsa-project.org/db/?f=2a...c71724ef8e21c6

[lidex]

Try this. Using a Terminal="Applications->Accessories->Terminal"
Open this file for editing:

 gksudo gedit /etc/modprobe.d/alsa-base.conf

Insert this line at the bottom:

 options snd-hda-intel model=laptop position_fix=1 enable=yes

Save. Close. Reboot.
Check your levels in alsamixer.

 alsamixer

Press <F6> to select the correct soundcard.
Press <F3> to show playback levels. <F4> selects capture levels [or use <Tab>]
Use the left/right arrow keys to select and up/down arrow keys to change levels. <M> to mute/unmute.
Go to "System ->Preferences ->Sound" and make sure the correct soundcard is default and adjust your profile on the hardware tab.
On the output tab choose the correct device.

[bngsudheer]

I followed all the steps you mentioned.

After adding the line
options snd-hda-intel model=laptop position_fix=1 enable=yes
in

/etc/modprobe.d/alsa-base.conf

The jack also stopped working.

In alsamixer I have selected HDA NVidia as the sound card.

In Sound Preferences, there's only one device listed. I have tested all the profiles in the Hardware tab.

Now, there's no sound output.

[bngsudheer]

Update:

In Sound Preferences, Hardware tab, when I select Analog Stereo Duplex or Analog Stereo Output, the jack works. But the internal speakers don't with any profile.