Results 1 to 4 of 4

Thread: Netgear WG311v2

  1. #1
    Join Date
    Dec 2010
    Beans
    2

    Netgear WG311v2

    Hey everybody,

    I am seeking some help in regards to getting my wireless card to work. I have used the sticky as well as read through the majority of the threads in this forum and many others to try and get this to work. I am at my wits end as I was just trying out Ubuntu for the first time 10.04. I ran:~$ dmesg | grep -e ndis -e wlan and below is what I came up with. Any advice would be helpfull.

    Thx,
    Jim


    [ 14.135403] ndiswrapper version 1.55 loaded (smp=yes, preempt=no)
    [ 15.136574] ndiswrapper: driver wg311v2 (NETGEAR, Inc.,06/17/2004,6.0.5.30) loaded
    [ 15.137338] ndiswrapper 0000:01:06.0: PCI INT A -> Link[LNKA] -> GSI 16 (level, high) -> IRQ 16
    [ 15.355284] ndiswrapper (mp_init:219): couldn't initialize device: C0000001
    [ 15.355292] ndiswrapper (pnp_start_device:435): Windows driver couldn't initialize the device (C0000001)
    [ 15.355305] ndiswrapper (mp_halt:262): device f00043a0 is not initialized - not halting
    [ 15.355309] ndiswrapper: device eth%d removed
    [ 15.355323] ndiswrapper 0000:01:06.0: PCI INT A disabled
    [ 15.355338] ndiswrapper: probe of 0000:01:06.0 failed with error -22
    [ 15.359591] usbcore: registered new interface driver ndiswrapper
    [ 2048.363216] usbcore: deregistering interface driver ndiswrapper
    [ 2048.365098] ndiswrapper (ntoskernel_exit:2677): object f0aa5120(2) was not freed, freeing it now
    [ 2048.402986] ndiswrapper version 1.55 loaded (smp=yes, preempt=no)
    [ 2048.423124] ndiswrapper: driver wg311v2 (NETGEAR, Inc.,06/17/2004,6.0.5.30) loaded
    [ 2048.423480] ndiswrapper 0000:01:06.0: PCI INT A -> Link[LNKA] -> GSI 16 (level, high) -> IRQ 16
    [ 2048.478272] ndiswrapper (mp_init:219): couldn't initialize device: C0000001
    [ 2048.478282] ndiswrapper (pnp_start_device:435): Windows driver couldn't initialize the device (C0000001)
    [ 2048.478296] ndiswrapper (mp_halt:262): device f0088ba0 is not initialized - not halting
    [ 2048.478300] ndiswrapper: device eth%d removed
    [ 2048.478322] ndiswrapper 0000:01:06.0: PCI INT A disabled
    [ 2048.478345] ndiswrapper: probe of 0000:01:06.0 failed with error -22
    [ 2048.480829] usbcore: registered new interface driver ndiswrapper

  2. #2
    Join Date
    Dec 2010
    Beans
    2

    Re: Netgear WG311v2

    Bump

  3. #3
    Join Date
    Jan 2007
    Beans
    7

    Re: Netgear WG311v2

    I have precisely the same issue. I had it working at one time but due to a crash, reloaded and have to start over at square 1 (or binary 0).

    Any help out there?

  4. #4
    Join Date
    Oct 2012
    Beans
    1

    Re: Netgear WG311v2

    Looks like this doesn't happen often...but I too have the problem. I installed Precise 12.04 and the card won't work...any help this time around? Ran the same command and nothing comes up, so nothing was installed.
    Last edited by JaySwartz; October 4th, 2012 at 04:35 PM.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •