I found some posts on the Problem, but the solutions I have tried did not succeed and I'm not sure, if I have made something wrong!
The Problem is that I get the following:
The error above with Try the 8139too driver instead also appears on startup. I have tried to set 8139cp on blacklist:
#: dmesg | grep 8139
[ 23.322063] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 23.526403] 8139cp 0000:01:08.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 23.526470] 8139cp 0000:01:08.0: Try the "8139too" driver instead.
[ 23.526534] 8139cp 0000:01:0a.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 23.526592] 8139cp 0000:01:0a.0: Try the "8139too" driver instead.
[ 23.528700] 8139too Fast Ethernet driver 0.9.28
[ 24.924789] eth1: RealTek RTL8139 at 0xe800, 00:50:bf:55:5e:b5, IRQ 20
[ 24.924791] eth1: Identified 8139 chip type 'RTL-8139C'
[ 24.925530] eth2: RealTek RTL8139 at 0xe400, 00:50:bf:55:5e:bc, IRQ 21
[ 24.925532] eth2: Identified 8139 chip type 'RTL-8139C'
But as you see above the driver is still loaded and the error appears. So what can I do to fix this problem?