Hi, new to ubuntu and having difficultly connecting to my wireless router.
It can see the router but will not connect keeps asking for password.
usb adapter is working 100% as i can connect with it using xp 64bit
here is my ubuntu enviorment
ted@ted-laptop:~$ lspci
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge Alternate
00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx)
00:0a.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 5)
00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [IDE mode] (rev 40)
00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 42)
00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller (rev 40)
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40)
00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller (rev 40)
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40)
00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller
00:15.0 PCI bridge: ATI Technologies Inc Device 43a0
00:16.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:16.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control
01:05.0 VGA compatible controller: ATI Technologies Inc Device 9714
01:05.1 Audio device: ATI Technologies Inc RS880 Audio Device [Radeon HD 4200]
02:00.0 SATA controller: JMicron Technology Corp. JMB361 AHCI/IDE (rev 02)
02:00.1 IDE interface: JMicron Technology Corp. JMB361 AHCI/IDE (rev 02)
03:07.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
ted@ted-laptop:~$
ted@ted-laptop:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-25-generic (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #45-Ubuntu SMP Sat Oct 16 19:48:22 UTC 2010 (Ubuntu 2.6.32-25.45-generic 2.6.32.21+drm33.7)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfe90000 (usable)
[ 0.000000] BIOS-e820: 00000000cfe90000 - 00000000cfea8000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cfea8000 - 00000000cfed0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfed0000 - 00000000cff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcfe90 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000130000000 aka 4864M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f000 (usable)
[ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000cfe90000 (usable)
[ 0.000000] modified: 00000000cfe90000 - 00000000cfea8000 (ACPI data)
[ 0.000000] modified: 00000000cfea8000 - 00000000cfed0000 (ACPI NVS)
[ 0.000000] modified: 00000000cfed0000 - 00000000cff00000 (reserved)
[ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[ 0.000000] RAMDISK: 37857000 - 37fef4c1
[ 0.000000] Allocated new RAMDISK: 008e1000 - 010794c1
[ 0.000000] Move RAMDISK from 0000000037857000 - 0000000037fef4c0 to 008e1000 - 010794c0
[ 0.000000] ACPI: RSDP 000fba90 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT cfe90100 0005C (v01 082410 XSDT1918 20100824 MSFT 00000097)
[ 0.000000] ACPI: FACP cfe90290 000F4 (v03 082410 FACP1918 20100824 MSFT 00000097)
[ 0.000000] ACPI: DSDT cfe90450 0F1F1 (v01 A1504 A1504000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS cfea8000 00040
[ 0.000000] ACPI: APIC cfe90390 0007C (v01 082410 APIC1918 20100824 MSFT 00000097)
[ 0.000000] ACPI: MCFG cfe90410 0003C (v01 082410 OEMMCFG 20100824 MSFT 00000097)
[ 0.000000] ACPI: OEMB cfea8040 00072 (v01 082410 OEMB1918 20100824 MSFT 00000097)
[ 0.000000] ACPI: SRAT cfe9f8a0 000E8 (v01 AMD FAM_F_10 00000002 AMD 00000001)
[ 0.000000] ACPI: HPET cfe9f990 00038 (v01 082410 OEMHPET 20100824 MSFT 00000097)
[ 0.000000] ACPI: SSDT cfe9f9d0 0088C (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2438MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00011000 - 00017f00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008dced8] TEXT DATA BSS ==> [0000100000 - 00008dced8]
[ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #5 [00008dd000 - 00008e026d] BRK ==> [00008dd000 - 00008e026d]
[ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #7 [00008e1000 - 00010794c1] NEW RAMDISK ==> [00008e1000 - 00010794c1]
[ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x000cfe90
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000cfe90
[ 0.000000] On node 0 totalpages: 851487
[ 0.000000] free_area_init_node: node 0, pgdat c079a760, node_mem_map c107b200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4878 pages used for memmap
[ 0.000000] HighMem zone: 619396 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] SMP: Allowing 6 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:2ff00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:6 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2c00000 s36056 r0 d21288 u524288
[ 0.000000] pcpu-alloc: s36056 r0 d21288 u524288 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 844833
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-25-generic root=UUID=13f74c2e-21bb-41ba-a260-9374155cb7ea ro
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 17031680 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:000cfe90)
[ 0.000000] Memory: 3344280k/3406400k available (4680k kernel code, 60328k reserved, 2122k data, 656k init, 2497096k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc07a5000 - 0xc0849000 ( 656 kB)
[ 0.000000] .data : 0xc0592317 - 0xc07a4e68 (2122 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0592317 (4680 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:456
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3110.420 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.84 BogoMIPS (lpj=12441680)
[ 0.004064] Security Framework initialized
[ 0.004099] AppArmor: AppArmor initialized
[ 0.004129] Mount-cache hash table entries: 512
[ 0.004222] Initializing cgroup subsys ns
[ 0.004249] Initializing cgroup subsys cpuacct
[ 0.004276] Initializing cgroup subsys memory
[ 0.004304] Initializing cgroup subsys devices
[ 0.004331] Initializing cgroup subsys freezer
[ 0.004357] Initializing cgroup subsys net_cls
[ 0.004391] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004419] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004445] CPU: Physical Processor ID: 0
[ 0.004471] CPU: Processor Core ID: 0
[ 0.004498] mce: CPU supports 6 MCE banks
[ 0.004528] using C1E aware idle routine
[ 0.004556] Performance Events: AMD PMU driver.
[ 0.004606] ... version: 0
[ 0.004633] ... bit width: 48
[ 0.004658] ... generic registers: 4
[ 0.004684] ... value mask: 0000ffffffffffff
[ 0.004711] ... max period: 00007fffffffffff
[ 0.004737] ... fixed-purpose events: 0
[ 0.004763] ... event mask: 000000000000000f
[ 0.004790] Checking 'hlt' instruction... OK.
[ 0.021466] ACPI: Core revision 20090903
[ 0.036006] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.036034] ftrace: allocating 21789 entries in 43 pages
[ 0.040055] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.040339] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.080279] CPU0: AMD Athlon(tm) II X4 645 Processor stepping 03
[ 0.084001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.008000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.168093] CPU1: AMD Athlon(tm) II X4 645 Processor stepping 03
[ 0.168292] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.172017] System has AMD C1E enabled
[ 0.172051] Switch to broadcast mode on CPU1
[ 0.172096] Booting processor 2 APIC 0x2 ip 0x6000
[ 0.008000] Initializing CPU#2
[ 0.008000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.008000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 2
[ 0.260037] CPU2: AMD Athlon(tm) II X4 645 Processor stepping 03
[ 0.260244] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.264018] Switch to broadcast mode on CPU2
[ 0.264073] Booting processor 3 APIC 0x3 ip 0x6000
[ 0.008000] Initializing CPU#3
[ 0.008000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.008000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 3
[ 0.352045] CPU3: AMD Athlon(tm) II X4 645 Processor stepping 03
[ 0.352258] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.356019] Brought up 4 CPUs
[ 0.356018] Switch to broadcast mode on CPU3
[ 0.356070] Total of 4 processors activated (24883.40 BogoMIPS).
[ 0.356361] CPU0 attaching sched-domain:
[ 0.356363] domain 0: span 0-3 level MC
[ 0.356365] groups: 0 1 2 3
[ 0.356369] CPU1 attaching sched-domain:
[ 0.356371] domain 0: span 0-3 level MC
[ 0.356372] groups: 1 2 3 0
[ 0.356375] CPU2 attaching sched-domain:
[ 0.356376] domain 0: span 0-3 level MC
[ 0.356378] groups: 2 3 0 1
[ 0.356381] CPU3 attaching sched-domain:
[ 0.356382] domain 0: span 0-3 level MC
[ 0.356383] groups: 3 0 1 2
[ 0.356455] Switch to broadcast mode on CPU0
[ 0.356455] devtmpfs: initialized
[ 0.356455] regulator: core version 0.5
[ 0.356455] Time: 9:59:08 Date: 11/20/10
[ 0.356455] NET: Registered protocol family 16
[ 0.356455] EISA bus registered
[ 0.356455] Trying to unpack rootfs image as initramfs...
[ 0.356455] ACPI: bus type pci registered
[ 0.356455] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.356455] PCI: Not using MMCONFIG.
[ 0.357006] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
[ 0.357033] PCI: Using configuration type 1 for base access
[ 0.357059] PCI: Using configuration type 1 for extended access
[ 0.357540] bio: create slab <bio-0> at 0
[ 0.357619] ACPI: EC: Look up EC in DSDT
[ 0.357619] ACPI Error (dswload-0781): [PRID] Namespace lookup failure, AE_ALREADY_EXISTS
[ 0.360033] ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20090903/psloop-230)
[ 0.360107] ACPI Error (psparse-0537): Method parse/execution failed [\] (Node c08d1804), AE_ALREADY_EXISTS
[ 0.360203] ACPI: Marking method \___ as Serialized because of AE_ALREADY_EXISTS error
[ 0.360284] ACPI Error (dswload-0659): [PCI0] Namespace lookup failure, AE_NOT_FOUND
[ 0.360357] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20090903/psloop-230)
[ 0.360431] ACPI Error (psparse-0537): Method parse/execution failed [\] (Node c08d1804), AE_NOT_FOUND
[ 0.360561] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.466743] ACPI: Interpreter enabled
[ 0.466801] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.466951] ACPI: Using IOAPIC for interrupt routing
[ 0.467018] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.469991] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.470052] PCI: Using MMCONFIG for extended config space
[ 0.475509] ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
[ 0.475633] ACPI Warning: Incorrect checksum in table [OEMB] - C2, should be C1 (20090903/tbutils-314)
[ 0.475812] ACPI: No dock devices found.
[ 0.475986] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.476101] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.476129] pci 0000:00:0a.0: PME# disabled
[ 0.476194] pci 0000:00:11.0: reg 10 io port: [0xa000-0xa007]
[ 0.476200] pci 0000:00:11.0: reg 14 io port: [0x9000-0x9003]
[ 0.476204] pci 0000:00:11.0: reg 18 io port: [0x8000-0x8007]
[ 0.476209] pci 0000:00:11.0: reg 1c io port: [0x7000-0x7003]
[ 0.476214] pci 0000:00:11.0: reg 20 io port: [0x6000-0x600f]
[ 0.476219] pci 0000:00:11.0: reg 24 32bit mmio: [0xfe5ffc00-0xfe5fffff]
[ 0.476232] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.476296] pci 0000:00:12.0: reg 10 32bit mmio: [0xfe5fe000-0xfe5fefff]
[ 0.476347] pci 0000:00:12.2: reg 10 32bit mmio: [0xfe5ff800-0xfe5ff8ff]
[ 0.476383] pci 0000:00:12.2: supports D1 D2
[ 0.476385] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.476413] pci 0000:00:12.2: PME# disabled
[ 0.476459] pci 0000:00:13.0: reg 10 32bit mmio: [0xfe5fd000-0xfe5fdfff]
[ 0.476510] pci 0000:00:13.2: reg 10 32bit mmio: [0xfe5ff400-0xfe5ff4ff]
[ 0.476546] pci 0000:00:13.2: supports D1 D2
[ 0.476547] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.476576] pci 0000:00:13.2: PME# disabled
[ 0.476656] pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
[ 0.476661] pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
[ 0.476666] pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
[ 0.476671] pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
[ 0.476675] pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f]
[ 0.476711] pci 0000:00:14.2: reg 10 64bit mmio: [0xfe5f8000-0xfe5fbfff]
[ 0.476741] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.476769] pci 0000:00:14.2: PME# disabled
[ 0.476867] pci 0000:00:14.5: reg 10 32bit mmio: [0xfe5fc000-0xfe5fcfff]
[ 0.476934] pci 0000:00:15.0: supports D1 D2
[ 0.476961] pci 0000:00:16.0: reg 10 32bit mmio: [0xfe5f7000-0xfe5f7fff]
[ 0.477011] pci 0000:00:16.2: reg 10 32bit mmio: [0xfe5ff000-0xfe5ff0ff]
[ 0.477047] pci 0000:00:16.2: supports D1 D2
[ 0.477049] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.477077] pci 0000:00:16.2: PME# disabled
[ 0.477215] pci 0000:01:05.0: reg 10 32bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.477218] pci 0000:01:05.0: reg 14 io port: [0xb000-0xb0ff]
[ 0.477221] pci 0000:01:05.0: reg 18 32bit mmio: [0xfe7f0000-0xfe7fffff]
[ 0.477227] pci 0000:01:05.0: reg 24 32bit mmio: [0xfe600000-0xfe6fffff]
[ 0.477236] pci 0000:01:05.0: supports D1 D2
[ 0.477250] pci 0000:01:05.1: reg 10 32bit mmio: [0xfe7e8000-0xfe7ebfff]
[ 0.477266] pci 0000:01:05.1: supports D1 D2
[ 0.477324] pci 0000:00:01.0: bridge io port: [0xb000-0xbfff]
[ 0.477326] pci 0000:00:01.0: bridge 32bit mmio: [0xfe600000-0xfe7fffff]
[ 0.477329] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.477391] pci 0000:02:00.0: reg 24 32bit mmio: [0xfe8fe000-0xfe8fffff]
[ 0.477419] pci 0000:02:00.0: PME# supported from D3hot
[ 0.477481] pci 0000:02:00.0: PME# disabled
[ 0.477544] pci 0000:02:00.1: reg 10 io port: [0xcc00-0xcc07]
[ 0.477550] pci 0000:02:00.1: reg 14 io port: [0xc880-0xc883]
[ 0.477556] pci 0000:02:00.1: reg 18 io port: [0xc800-0xc807]
[ 0.477563] pci 0000:02:00.1: reg 1c io port: [0xc480-0xc483]
[ 0.477569] pci 0000:02:00.1: reg 20 io port: [0xc400-0xc40f]
[ 0.477652] pci 0000:00:0a.0: bridge io port: [0xc000-0xcfff]
[ 0.477654] pci 0000:00:0a.0: bridge 32bit mmio: [0xfe800000-0xfe8fffff]
[ 0.477697] pci 0000:03:07.0: reg 10 32bit mmio: [0xfe9fb800-0xfe9fbfff]
[ 0.477704] pci 0000:03:07.0: reg 14 io port: [0xdc00-0xdc7f]
[ 0.477748] pci 0000:03:07.0: supports D2
[ 0.477750] pci 0000:03:07.0: PME# supported from D2 D3hot D3cold
[ 0.477779] pci 0000:03:07.0: PME# disabled
[ 0.477838] pci 0000:00:14.4: transparent bridge
[ 0.477865] pci 0000:00:14.4: bridge io port: [0xd000-0xdfff]
[ 0.477868] pci 0000:00:14.4: bridge 32bit mmio: [0xfe900000-0xfe9fffff]
[ 0.477909] pci 0000:04:00.0: reg 10 io port: [0xe800-0xe8ff]
[ 0.477927] pci 0000:04:00.0: reg 18 64bit mmio pref: [0xfdfff000-0xfdffffff]
[ 0.477939] pci 0000:04:00.0: reg 20 64bit mmio pref: [0xfdff8000-0xfdffbfff]
[ 0.477978] pci 0000:04:00.0: supports D1 D2
[ 0.477980] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.478009] pci 0000:04:00.0: PME# disabled
[ 0.478086] pci 0000:00:15.0: bridge io port: [0xe000-0xefff]
[ 0.478091] pci 0000:00:15.0: bridge 64bit mmio pref: [0xfdf00000-0xfdffffff]
[ 0.478102] pci_bus 0000:00: on NUMA node 0
[ 0.478105] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.478262] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.478323] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 0.478383] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.478451] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT]
[ 0.482364] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 14 15)
[ 0.482683] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 *7 10 11 14 15)
[ 0.483002] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 14 15)
[ 0.483339] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 14 15)
[ 0.483663] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0, disabled.
[ 0.483988] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0, disabled.
[ 0.484303] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 14 15)
[ 0.484582] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0, disabled.
[ 0.484901] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks= none
[ 0.484932] vgaarb: loaded
[ 0.485028] SCSI subsystem initialized
[ 0.485093] libata version 3.00 loaded.
[ 0.485093] usbcore: registered new interface driver usbfs
[ 0.485093] usbcore: registered new interface driver hub
[ 0.485093] usbcore: registered new device driver usb
[ 0.485093] ACPI: WMI: Mapper loaded
[ 0.485093] PCI: Using ACPI for IRQ routing
[ 0.485093] NetLabel: Initializing
[ 0.485093] NetLabel: domain hash size = 128
[ 0.485093] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.485093] NetLabel: unlabeled traffic allowed by default
[ 0.485093] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.485093] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.486506] Switching to clocksource tsc
[ 0.489000] AppArmor: AppArmor Filesystem Enabled
[ 0.489071] pnp: PnP ACPI init
[ 0.489107] ACPI: bus type pnp registered
[ 0.491591] pnp: PnP ACPI: found 13 devices
[ 0.491617] ACPI: ACPI bus type pnp unregistered
[ 0.491644] PnPBIOS: Disabled by ACPI PNP
[ 0.491678] system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.491708] system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.491737] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[ 0.491764] system 00:09: ioport range 0x40b-0x40b has been reserved
[ 0.491792] system 00:09: ioport range 0x4d6-0x4d6 has been reserved
[ 0.491833] system 00:09: ioport range 0xc00-0xc01 has been reserved
[ 0.491860] system 00:09: ioport range 0xc14-0xc14 has been reserved
[ 0.491888] system 00:09: ioport range 0xc50-0xc51 has been reserved
[ 0.491915] system 00:09: ioport range 0xc52-0xc52 has been reserved
[ 0.491942] system 00:09: ioport range 0xc6c-0xc6c has been reserved
[ 0.491969] system 00:09: ioport range 0xc6f-0xc6f has been reserved
[ 0.491996] system 00:09: ioport range 0xcd0-0xcd1 has been reserved
[ 0.492023] system 00:09: ioport range 0xcd2-0xcd3 has been reserved
[ 0.492050] system 00:09: ioport range 0xcd4-0xcd5 has been reserved
[ 0.492077] system 00:09: ioport range 0xcd6-0xcd7 has been reserved
[ 0.492104] system 00:09: ioport range 0xcd8-0xcdf has been reserved
[ 0.492131] system 00:09: ioport range 0x800-0x89f has been reserved
[ 0.492158] system 00:09: ioport range 0xb00-0xb1f has been reserved
[ 0.492185] system 00:09: ioport range 0xb20-0xb3f has been reserved
[ 0.492212] system 00:09: ioport range 0x900-0x90f has been reserved
[ 0.492239] system 00:09: ioport range 0x910-0x91f has been reserved
[ 0.492266] system 00:09: ioport range 0xfe00-0xfefe has been reserved
[ 0.492294] system 00:09: iomem range 0xcff00000-0xcfffffff could not be reserved
[ 0.492324] system 00:09: iomem range 0xffb80000-0xffbfffff has been reserved
[ 0.492351] system 00:09: iomem range 0xfec10000-0xfec1001f has been reserved
[ 0.492379] system 00:09: iomem range 0xfed80000-0xfed80fff has been reserved
[ 0.492408] system 00:0a: ioport range 0x230-0x23f has been reserved
[ 0.492435] system 00:0a: ioport range 0x290-0x29f has been reserved
[ 0.492462] system 00:0a: ioport range 0xf40-0xf4f has been reserved
[ 0.492489] system 00:0a: ioport range 0xa30-0xa3f has been reserved
[ 0.492517] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.492546] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.492574] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
[ 0.492601] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[ 0.492628] system 00:0c: iomem range 0x100000-0xcfefffff could not be reserved
[ 0.492657] system 00:0c: iomem range 0xfec00000-0xffffffff could not be reserved
[ 0.506899] Freeing initrd memory: 7777k freed
[ 0.527427] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.527455] pci 0000:00:01.0: IO window: 0xb000-0xbfff
[ 0.527482] pci 0000:00:01.0: MEM window: 0xfe600000-0xfe7fffff
[ 0.527510] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.527540] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02
[ 0.527567] pci 0000:00:0a.0: IO window: 0xc000-0xcfff
[ 0.527594] pci 0000:00:0a.0: MEM window: 0xfe800000-0xfe8fffff
[ 0.527621] pci 0000:00:0a.0: PREFETCH window: disabled
[ 0.527649] pci 0000:00:14.4: PCI bridge, secondary bus 0000:03
[ 0.527676] pci 0000:00:14.4: IO window: 0xd000-0xdfff
[ 0.527705] pci 0000:00:14.4: MEM window: 0xfe900000-0xfe9fffff
[ 0.527733] pci 0000:00:14.4: PREFETCH window: disabled
[ 0.527763] pci 0000:00:15.0: PCI bridge, secondary bus 0000:04
[ 0.527790] pci 0000:00:15.0: IO window: 0xe000-0xefff
[ 0.527832] pci 0000:00:15.0: MEM window: disabled
[ 0.527860] pci 0000:00:15.0: PREFETCH window: 0x000000fdf00000-0x000000fdffffff
[ 0.527900] alloc irq_desc for 18 on node -1
[ 0.527902] alloc kstat_irqs on node -1
[ 0.527906] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.527934] pci 0000:00:0a.0: setting latency timer to 64
[ 0.527942] alloc irq_desc for 16 on node -1
[ 0.527943] alloc kstat_irqs on node -1
[ 0.527945] pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.527974] pci 0000:00:15.0: setting latency timer to 64
[ 0.527977] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.527979] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.527981] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff]
[ 0.527983] pci_bus 0000:01: resource 1 mem: [0xfe600000-0xfe7fffff]
[ 0.527985] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.527986] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff]
[ 0.527988] pci_bus 0000:02: resource 1 mem: [0xfe800000-0xfe8fffff]
[ 0.527990] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff]
[ 0.527992] pci_bus 0000:03: resource 1 mem: [0xfe900000-0xfe9fffff]
[ 0.527993] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
[ 0.527995] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
[ 0.527997] pci_bus 0000:04: resource 0 io: [0xe000-0xefff]
[ 0.527998] pci_bus 0000:04: resource 2 pref mem [0xfdf00000-0xfdffffff]
[ 0.528023] NET: Registered protocol family 2
[ 0.528109] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.528352] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.528731] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.528932] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.528983] TCP reno registered
[ 0.529070] NET: Registered protocol family 1
[ 1.387949] pci 0000:01:05.0: Boot video device
[ 1.388159] cpufreq-nforce2: No nForce2 chipset.
[ 1.388744] Scanning for low memory corruption every 60 seconds
[ 1.388831] audit: initializing netlink socket (disabled)
[ 1.388896] type=2000 audit(1290247148.387:1): initialized
[ 1.394700] highmem bounce pool size: 64 pages
[ 1.394729] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.395673] VFS: Disk quotas dquot_6.5.2
[ 1.395738] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.396135] fuse init (API version 7.13)
[ 1.396237] msgmni has been set to 1672
[ 1.396496] alg: No test for stdrng (krng)
[ 1.396560] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.396590] io scheduler noop registered
[ 1.396616] io scheduler anticipatory registered
[ 1.396642] io scheduler deadline registered
[ 1.396690] io scheduler cfq registered (default)
[ 1.396808] alloc irq_desc for 24 on node -1
[ 1.396809] alloc kstat_irqs on node -1
[ 1.396815] pcieport 0000:00:0a.0: irq 24 for MSI/MSI-X
[ 1.396819] pcieport 0000:00:0a.0: setting latency timer to 64
[ 1.396956] alloc irq_desc for 25 on node -1
[ 1.396958] alloc kstat_irqs on node -1
[ 1.396963] pcieport 0000:00:15.0: irq 25 for MSI/MSI-X
[ 1.396968] pcieport 0000:00:15.0: setting latency timer to 64
[ 1.397012] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.397051] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.397137] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.397201] ACPI: Power Button [PWRB]
[ 1.397254] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.397283] ACPI: Power Button [PWRF]
[ 1.397822] processor LNXCPU:00: registered as cooling_device0
[ 1.398054] processor LNXCPU:01: registered as cooling_device1
[ 1.398284] processor LNXCPU:02: registered as cooling_device2
[ 1.398516] processor LNXCPU:03: registered as cooling_device3
[ 1.400163] isapnp: Scanning for PnP cards...
[ 1.400914] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.401089] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.401347] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.401960] brd: module loaded
[ 1.402240] loop: module loaded
[ 1.402383] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.402564] alloc irq_desc for 17 on node -1
[ 1.402566] alloc kstat_irqs on node -1
[ 1.402571] pata_acpi 0000:00:14.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.402620] pata_acpi 0000:00:14.1: setting latency timer to 64
[ 1.402637] pata_acpi 0000:02:00.1: enabling device (0000 -> 0001)
[ 1.402667] alloc irq_desc for 19 on node -1
[ 1.402668] alloc kstat_irqs on node -1
[ 1.402670] pata_acpi 0000:02:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.402711] pata_acpi 0000:02:00.1: setting latency timer to 64
[ 1.402719] pata_acpi 0000:02:00.1: PCI INT B disabled
[ 1.402913] Fixed MDIO Bus: probed
[ 1.403023] PPP generic driver version 2.4.2
[ 1.403067] tun: Universal TUN/TAP device driver, 1.6
[ 1.403093] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.403163] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.403232] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.403270] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.403313] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.403363] ehci_hcd 0000:00:12.2: debug port 1
[ 1.403402] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe5ff800
[ 1.411864] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.411969] usb usb1: configuration #1 chosen from 1 choice
[ 1.412044] hub 1-0:1.0: USB hub found
[ 1.412076] hub 1-0:1.0: 5 ports detected
[ 1.412143] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.412181] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.412226] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.412273] ehci_hcd 0000:00:13.2: debug port 1
[ 1.412309] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe5ff400
[ 1.423841] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.423947] usb usb2: configuration #1 chosen from 1 choice
[ 1.424021] hub 2-0:1.0: USB hub found
[ 1.424052] hub 2-0:1.0: 5 ports detected
[ 1.424119] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.424157] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 1.424202] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 1.424249] ehci_hcd 0000:00:16.2: debug port 1
[ 1.424284] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe5ff000
[ 1.435866] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.435971] usb usb3: configuration #1 chosen from 1 choice
[ 1.436047] hub 3-0:1.0: USB hub found
[ 1.436077] hub 3-0:1.0: 4 ports detected
[ 1.436138] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.436176] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.436214] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.436261] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 1.436308] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe5fe000
[ 1.495959] usb usb4: configuration #1 chosen from 1 choice
[ 1.496004] hub 4-0:1.0: USB hub found
[ 1.496035] hub 4-0:1.0: 5 ports detected
[ 1.496099] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.496137] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.496183] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.496225] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe5fd000
[ 1.555900] usb usb5: configuration #1 chosen from 1 choice
[ 1.555944] hub 5-0:1.0: USB hub found
[ 1.555975] hub 5-0:1.0: 5 ports detected
[ 1.556040] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.556078] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.556127] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
[ 1.556168] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe5fc000
[ 1.615960] usb usb6: configuration #1 chosen from 1 choice
[ 1.616004] hub 6-0:1.0: USB hub found
[ 1.616036] hub 6-0:1.0: 2 ports detected
[ 1.616096] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.616134] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 1.616180] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
[ 1.616223] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe5f7000
[ 1.675952] usb usb7: configuration #1 chosen from 1 choice
[ 1.675996] hub 7-0:1.0: USB hub found
[ 1.676027] hub 7-0:1.0: 4 ports detected
[ 1.676091] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.676169] PNP: No PS/2 controller found. Probing ports directly.
[ 1.676663] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.676697] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.676773] mice: PS/2 mouse device common for all mice
[ 1.676862] rtc_cmos 00:03: RTC can wake from S4
[ 1.676917] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.676960] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.677043] device-mapper: uevent: version 1.0.3
[ 1.677185] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 1.677313] device-mapper: multipath: version 1.1.0 loaded
[ 1.677339] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.677448] EISA: Probing bus 0 at eisa.0
[ 1.677492] Cannot allocate resource for EISA slot 6
[ 1.677518] Cannot allocate resource for EISA slot 7
[ 1.677544] Cannot allocate resource for EISA slot 8
[ 1.677570] EISA: Detected 0 cards.
[ 1.677728] cpuidle: using governor ladder
[ 1.677754] cpuidle: using governor menu
[ 1.678042] TCP cubic registered
[ 1.678185] NET: Registered protocol family 10
[ 1.678531] lo: Disabled Privacy Extensions
[ 1.678822] NET: Registered protocol family 17
[ 1.678941] powernow-k8: Found 1 AMD Athlon(tm) II X4 645 Processor processors (4 cpu cores) (version 2.20.00)
[ 1.679000] powernow-k8: 0 : pstate 0 (3100 MHz)
[ 1.679026] powernow-k8: 1 : pstate 1 (2400 MHz)
[ 1.679052] powernow-k8: 2 : pstate 2 (1900 MHz)
[ 1.679078] powernow-k8: 3 : pstate 3 (800 MHz)
[ 1.753377] Using IPI No-Shortcut mode
[ 1.753484] PM: Resume from disk failed.
[ 1.753493] registered taskstats version 1
[ 1.753891] Magic number: 2:928:980
[ 1.754023] rtc_cmos 00:03: setting system clock to 2010-11-20 09:59:09 UTC (1290247149)
[ 1.754052] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.754079] EDD information not available.
[ 1.805135] isapnp: No Plug & Play device found
[ 1.805206] Freeing unused kernel memory: 656k freed
[ 1.805481] Write protecting the kernel text: 4684k
[ 1.805545] Write protecting the kernel read-only data: 1840k
[ 1.819258] udev: starting version 151
[ 1.833853] pata_jmicron 0000:02:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.833981] pata_jmicron 0000:02:00.1: setting latency timer to 64
[ 1.839924] scsi0 : pata_atiixp
[ 1.841312] scsi1 : pata_jmicron
[ 1.848307] scsi2 : pata_atiixp
[ 1.849604] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 1.849697] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 1.849763] ahci 0000:00:11.0: version 3.0
[ 1.849805] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.849863] alloc irq_desc for 26 on node -1
[ 1.849865] alloc kstat_irqs on node -1
[ 1.849873] ahci 0000:00:11.0: irq 26 for MSI/MSI-X
[ 1.849937] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 1.849967] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.853616] scsi3 : pata_jmicron
[ 1.854133] ata3: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 19
[ 1.854226] ata4: PATA max UDMA/100 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 19
[ 1.859113] scsi4 : ahci
[ 1.863154] scsi5 : ahci
[ 1.865811] scsi6 : ahci
[ 1.866193] scsi7 : ahci
[ 1.866325] ata5: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5ffd00 irq 26
[ 1.866907] ata6: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5ffd80 irq 26
[ 1.866937] ata7: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5ffe00 irq 26
[ 1.866967] ata8: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5ffe80 irq 26
[ 1.867041] ahci 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.867137] ahci 0000:02:00.0: JMB361 has only one port, port_map 0x3 -> 0x1
[ 1.880787] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x1 impl SATA mode
[ 1.880854] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.880884] ahci 0000:02:00.0: setting latency timer to 64
[ 1.880979] scsi8 : ahci
[ 1.881096] scsi9 : ahci
[ 1.881183] ata9: SATA max UDMA/133 abar m8192@0xfe8fe000 port 0xfe8fe100 irq 18
[ 1.881212] ata10: DUMMY
[ 1.928066] usb 4-5: new low speed USB device using ohci_hcd and address 2
[ 2.104122] usb 4-5: configuration #1 chosen from 1 choice
[ 2.112880] usbcore: registered new interface driver hiddev
[ 2.118173] input: Novatek Ultra Flat Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.0/input/input3
[ 2.118287] generic-usb 0003:0603:00F2.0001: input,hidraw0: USB HID v1.10 Keyboard [Novatek Ultra Flat Keyboard] on usb-0000:00:12.0-5/input0
[ 2.130089] input: Novatek Ultra Flat Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.1/input/input4
[ 2.130207] generic-usb 0003:0603:00F2.0002: input,hidraw1: USB HID v1.10 Device [Novatek Ultra Flat Keyboard] on usb-0000:00:12.0-5/input1
[ 2.130253] usbcore: registered new interface driver usbhid
[ 2.130280] usbhid: v2.6:USB HID core driver
[ 2.188078] ata8: SATA link down (SStatus 0 SControl 300)
[ 2.204093] ata9: SATA link down (SStatus 0 SControl 300)
[ 2.272071] usb 3-3: new high speed USB device using ehci_hcd and address 2
[ 2.352075] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.352124] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.352164] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.352793] ata6.00: ATA-8: FUJITSU MHY2200BH, 0000000B, max UDMA/100
[ 2.352823] ata6.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.353606] ata6.00: configured for UDMA/100
[ 2.354916] ata7.00: ATA-8: WDC WD5001AALS-00E3A0, 05.01D05, max UDMA/133
[ 2.354938] ata5.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100
[ 2.354974] ata7.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.357060] ata7.00: configured for UDMA/133
[ 2.358891] ata5.00: configured for UDMA/100
[ 2.379549] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN02 PQ: 0 ANSI: 5
[ 2.383864] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.383897] Uniform CD-ROM driver Revision: 3.20
[ 2.384011] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 2.384065] sr 4:0:0:0: Attached scsi generic sg0 type 5
[ 2.384203] scsi 5:0:0:0: Direct-Access ATA FUJITSU MHY2200B 0000 PQ: 0 ANSI: 5
[ 2.384324] sd 5:0:0:0: Attached scsi generic sg1 type 0
[ 2.384370] sd 5:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
[ 2.384461] scsi 6:0:0:0: Direct-Access ATA WDC WD5001AALS-0 05.0 PQ: 0 ANSI: 5
[ 2.384610] sd 6:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.384615] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 2.384688] sd 5:0:0:0: [sda] Write Protect is off
[ 2.384689] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.384702] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.384858] sd 6:0:0:0: [sdb] Write Protect is off
[ 2.384920] sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.384934] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.385057] sda:
[ 2.385124] sdb: sdb1 sdb2 < sdb5 >
[ 2.407196] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 2.423814] sda1 sda2 <
[ 2.432457] usb 3-3: configuration #1 chosen from 1 choice
[ 2.440058] sda5 sda6 sda7 sda8 sda9 >
[ 2.496483] sd 5:0:0:0: [sda] Attached SCSI disk
[ 2.498431] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.498488] r8169 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.498547] r8169 0000:04:00.0: setting latency timer to 64
[ 2.498552] r8169 0000:04:00.0: unknown MAC, using family default
[ 2.498613] alloc irq_desc for 27 on node -1
[ 2.498615] alloc kstat_irqs on node -1
[ 2.498626] r8169 0000:04:00.0: irq 27 for MSI/MSI-X
[ 2.499081] eth0: RTL8168b/8111b at 0xf81b4000, 20:cf:30:4e:1b:66, XID 0c200000 IRQ 27
[ 2.500484] alloc irq_desc for 22 on node -1
[ 2.500487] alloc kstat_irqs on node -1
[ 2.500492] ohci1394 0000:03:07.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 2.548069] usb 3-4: new high speed USB device using ehci_hcd and address 3
[ 2.558081] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[fe9fb800-fe9fbfff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 2.682786] usb 3-4: configuration #1 chosen from 1 choice
[ 2.687880] Initializing USB Mass Storage driver...
[ 2.688067] scsi10 : SCSI emulation for USB Mass Storage devices
[ 2.688201] usb-storage: device found at 3
[ 2.688203] usb-storage: waiting for device to settle before scanning
[ 2.688216] usbcore: registered new interface driver usb-storage
[ 2.688246] USB Mass Storage support registered.
[ 2.948071] usb 5-1: new low speed USB device using ohci_hcd and address 2
[ 3.121289] usb 5-1: configuration #1 chosen from 1 choice
[ 3.131434] input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input5
[ 3.131577] generic-usb 0003:045E:00CB.0003: input,hidraw2: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:13.0-1/input0
[ 3.553931] EXT4-fs (sda8): mounted filesystem with ordered data mode
[ 3.832197] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001fc6000002ef70]
[ 7.688314] usb-storage: device scan complete
[ 7.689158] scsi 10:0:0:0: Direct-Access USB 2.0 Flash Disk 1100 PQ: 0 ANSI: 0 CCS
[ 7.689456] sd 10:0:0:0: Attached scsi generic sg3 type 0
[ 7.691182] sd 10:0:0:0: [sdc] 4018176 512-byte logical blocks: (2.05 GB/1.91 GiB)
[ 7.692309] sd 10:0:0:0: [sdc] Write Protect is off
[ 7.692347] sd 10:0:0:0: [sdc] Mode Sense: 43 00 00 00
[ 7.692349] sd 10:0:0:0: [sdc] Assuming drive cache: write through
[ 7.696062] sd 10:0:0:0: [sdc] Assuming drive cache: write through
[ 7.696094] sdc: sdc1
[ 7.698919] sd 10:0:0:0: [sdc] Assuming drive cache: write through
[ 7.698950] sd 10:0:0:0: [sdc] Attached SCSI removable disk
[ 14.769305] Adding 1311736k swap on /dev/sda9. Priority:-1 extents:1 across:1311736k
[ 14.771781] udev: starting version 151
[ 14.802490] shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602 ss_vid 0 ss_did 0
[ 14.802493] shpchp 0000:00:01.0: Cannot reserve MMIO region
[ 14.802604] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 14.804949] ACPI: resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SMRG [0xb00-0xb2f]
[ 14.804952] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.814937] udev: renamed network interface eth0 to eth1
[ 14.834001] lp: driver loaded but no devices found
[ 14.854117] Linux agpgart interface v0.103
[ 14.884916] [drm] Initialized drm 1.1.0 20060810
[ 14.887897] type=1505 audit(1290247162.630:2): operation="profile_load" pid=765 name="/sbin/dhclient3"
[ 14.888076] type=1505 audit(1290247162.630:3): operation="profile_load" pid=765 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 14.888175] type=1505 audit(1290247162.630:4): operation="profile_load" pid=765 name="/usr/lib/connman/scripts/dhclient-script"
[ 14.892796] ATK0110 ATK0110:00: EC enabled
[ 14.916715] [drm] radeon defaulting to kernel modesetting.
[ 14.916717] [drm] radeon kernel modesetting enabled.
[ 14.916787] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 14.916790] radeon 0000:01:05.0: setting latency timer to 64
[ 14.918018] [drm] radeon: Initializing kernel modesetting.
[ 14.918239] [drm] register mmio base: 0xFE7F0000
[ 14.918240] [drm] register mmio size: 65536
[ 14.919415] ATOM BIOS: B43106_DVI
[ 14.919429] [drm] Clocks initialized !
[ 14.919648] [drm] Detected VRAM RAM=256M, BAR=256M
[ 14.919652] [drm] RAM width 32bits DDR
[ 14.919723] [TTM] Zone kernel: Available graphics memory: 428480 kiB.
[ 14.919724] [TTM] Zone highmem: Available graphics memory: 1677028 kiB.
[ 14.919736] [drm] radeon: 256M of VRAM memory ready
[ 14.919738] [drm] radeon: 512M of GTT memory ready.
[ 14.919766] [drm] radeon: irq initialized.
[ 14.919768] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 14.920043] [drm] Loading RS780 Microcode
[ 14.920046] platform radeon_cp.0: firmware: requesting radeon/RS780_pfp.bin
[ 14.951669] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.967185] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 14.972141] platform radeon_cp.0: firmware: requesting radeon/RS780_me.bin
[ 14.973535] platform radeon_cp.0: firmware: requesting radeon/R600_rlc.bin
[ 14.974956] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 14.975229] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 14.975231] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[ 14.975232] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 15.008535] [drm] ring test succeeded in 1 usecs
[ 15.008638] [drm] radeon: ib pool ready.
[ 15.008681] [drm] ib test succeeded in 0 usecs
[ 15.008683] [drm] Enabling audio support
[ 15.008798] [drm] Radeon Display Connectors
[ 15.008800] [drm] Connector 0:
[ 15.008801] [drm] VGA
[ 15.008803] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 15.008804] [drm] Encoders:
[ 15.008805] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 15.008806] [drm] Connector 1:
[ 15.008807] [drm] DVI-D
[ 15.008808] [drm] HPD3
[ 15.008809] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 15.008810] [drm] Encoders:
[ 15.008811] [drm] DFP1: INTERNAL_KLDSCP_LVTMA
[ 15.043480] rt2870sta: module is from the staging directory, the quality is unknown, you have been warned.
[ 15.048017] rtusb init --->
[ 15.048056] usbcore: registered new interface driver rt2870
[ 15.048247] rt2870sta: module is from the staging directory, the quality is unknown, you have been warned.
[ 15.049138]
[ 15.049139]
[ 15.049139] === pAd = f8c3f000, size = 566748 ===
[ 15.049140]
[ 15.049141] <-- RTMPAllocAdapterBlock, Status=0
[ 15.147944] [drm] fb mappable at 0xD0141000
[ 15.147946] [drm] vram apper at 0xD0000000
[ 15.147947] [drm] size 8294400
[ 15.147948] [drm] fb depth is 24
[ 15.147949] [drm] pitch is 7680
[ 15.148020] fb0: radeondrmfb frame buffer device
[ 15.148021] registered panic notifier
[ 15.148025] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:05.0 on minor 0
[ 15.148079] HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 15.148104] HDA Intel 0000:01:05.1: setting latency timer to 64
[ 15.149206] vga16fb: initializing
[ 15.149208] vga16fb: mapped to 0xc00a0000
[ 15.149212] vga16fb: not registering due to another framebuffer present
[ 15.181456] Console: switching to colour frame buffer device 240x67
[ 16.403984] r8169: eth1: link down
[ 16.404125] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 16.404446] type=1505 audit(1290247164.149:5): operation="profile_load" pid=1148 name="/usr/share/gdm/guest-session/Xsession"
[ 16.405546] type=1505 audit(1290247164.149:6): operation="profile_replace" pid=1155 name="/sbin/dhclient3"
[ 16.405732] type=1505 audit(1290247164.149:7): operation="profile_replace" pid=1155 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 16.405838] type=1505 audit(1290247164.149:8): operation="profile_replace" pid=1155 name="/usr/lib/connman/scripts/dhclient-script"
[ 16.407798] type=1505 audit(1290247164.149:9): operation="profile_load" pid=1212 name="/usr/bin/evince"
[ 16.410126] type=1505 audit(1290247164.153:10): operation="profile_load" pid=1212 name="/usr/bin/evince-previewer"
[ 16.411568] type=1505 audit(1290247164.153:11): operation="profile_load" pid=1212 name="/usr/bin/evince-thumbnailer"
[ 16.683926] <-- RTMPAllocTxRxRingMemory, Status=0
[ 16.686162] -->RTUSBVenderReset
[ 16.686284] <--RTUSBVenderReset
[ 17.000648] --> Error 2 opening /etc/Wireless/RT3070STA/RT3070STA.dat
[ 17.000651] 1. Phy Mode = 0
[ 17.000652] 2. Phy Mode = 0
[ 17.030510] RTMPSetPhyMode: channel is out of range, use first channel=1
[ 17.045612] 3. Phy Mode = 0
[ 17.053245] MCS Set = 00 00 00 00 00
[ 17.093084] <==== RTMPInitialize, Status=0
[ 17.094715] 0x1300 = 000a4360
[ 17.255308] ppdev: user-space parallel port driver
[ 17.771077] CPU0 attaching NULL sched-domain.
[ 17.771081] CPU1 attaching NULL sched-domain.
[ 17.771083] CPU2 attaching NULL sched-domain.
[ 17.771085] CPU3 attaching NULL sched-domain.
[ 17.796418] CPU0 attaching sched-domain:
[ 17.796421] domain 0: span 0-3 level MC
[ 17.796423] groups: 0 1 2 3
[ 17.796428] CPU1 attaching sched-domain:
[ 17.796429] domain 0: span 0-3 level MC
[ 17.796431] groups: 1 2 3 0
[ 17.796434] CPU2 attaching sched-domain:
[ 17.796435] domain 0: span 0-3 level MC
[ 17.796436] groups: 2 3 0 1
[ 17.796439] CPU3 attaching sched-domain:
[ 17.796440] domain 0: span 0-3 level MC
[ 17.796442] groups: 3 0 1 2
[ 18.155466] CPU0 attaching NULL sched-domain.
[ 18.155471] CPU1 attaching NULL sched-domain.
[ 18.155473] CPU2 attaching NULL sched-domain.
[ 18.155474] CPU3 attaching NULL sched-domain.
[ 18.184299] CPU0 attaching sched-domain:
[ 18.184303] domain 0: span 0-3 level MC
[ 18.184305] groups: 0 1 2 3
[ 18.184310] CPU1 attaching sched-domain:
[ 18.184311] domain 0: span 0-3 level MC
[ 18.184313] groups: 1 2 3 0
[ 18.184316] CPU2 attaching sched-domain:
[ 18.184317] domain 0: span 0-3 level MC
[ 18.184319] groups: 2 3 0 1
[ 18.184322] CPU3 attaching sched-domain:
[ 18.184323] domain 0: span 0-3 level MC
[ 18.184324] groups: 3 0 1 2
[ 18.719980] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 22.547523] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
[ 27.128049] wlan0: no IPv6 routers present
[ 34.972053] ===>rt_ioctl_giwscan. 2(2) BSS returned, data->length = 246
[ 34.972268] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
[ 35.099936] DRS: unkown mode,default use 11N 1S AP
[ 35.099939] DRS: unkown mode (SupRateLen=0, ExtRateLen=0, MCSSet[0]=0x0, MCSSet[1]=0x0)
[ 50.102433] ===>rt_ioctl_giwscan. 2(2) BSS returned, data->length = 246
[ 50.102562] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
[ 50.152768] DRS: unkown mode,default use 11N 1S AP
[ 50.152772] DRS: unkown mode (SupRateLen=4, ExtRateLen=8, MCSSet[0]=0x0, MCSSet[1]=0x0)
[ 65.153332] ===>rt_ioctl_giwscan. 2(2) BSS returned, data->length = 246
[ 65.153464] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
[ 65.205861] DRS: unkown mode,default use 11N 1S AP
[ 65.205865] DRS: unkown mode (SupRateLen=4, ExtRateLen=8, MCSSet[0]=0x0, MCSSet[1]=0x0)
[ 80.206523] ===>rt_ioctl_giwscan. 2(2) BSS returned, data->length = 246
[ 80.206853] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
[ 80.258986] DRS: unkown mode,default use 11N 1S AP
[ 80.258996] DRS: unkown mode (SupRateLen=4, ExtRateLen=8, MCSSet[0]=0x0, MCSSet[1]=0x0)
[ 103.666136] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
[ 103.666460] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
[ 103.708548] DRS: unkown mode,default use 11N 1S AP
[ 103.708558] DRS: unkown mode (SupRateLen=4, ExtRateLen=8, MCSSet[0]=0x0, MCSSet[1]=0x0)
[ 118.710616] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
[ 118.710938] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
[ 118.761643] DRS: unkown mode,default use 11N 1S AP
[ 118.761652] DRS: unkown mode (SupRateLen=4, ExtRateLen=8, MCSSet[0]=0x0, MCSSet[1]=0x0)
[ 133.763799] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
[ 133.764158] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
[ 133.814328] DRS: unkown mode,default use 11N 1S AP
[ 133.814338] DRS: unkown mode (SupRateLen=4, ExtRateLen=8, MCSSet[0]=0x0, MCSSet[1]=0x0)
[ 148.816140] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
[ 148.816465] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
[ 148.867324] DRS: unkown mode,default use 11N 1S AP
[ 148.867334] DRS: unkown mode (SupRateLen=4, ExtRateLen=8, MCSSet[0]=0x0, MCSSet[1]=0x0)
[ 168.311174] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
[ 168.311498] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
[ 168.333431] DRS: unkown mode,default use 11N 1S AP
[ 168.333441] DRS: unkown mode (SupRateLen=4, ExtRateLen=8, MCSSet[0]=0x0, MCSSet[1]=0x0)
[ 183.334643] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
[ 183.334968] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
[ 183.376407] DRS: unkown mode,default use 11N 1S AP
[ 183.376417] DRS: unkown mode (SupRateLen=4, ExtRateLen=8, MCSSet[0]=0x0, MCSSet[1]=0x0)
[ 198.377752] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
[ 198.378088] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
[ 198.429484] DRS: unkown mode,default use 11N 1S AP
[ 198.429495] DRS: unkown mode (SupRateLen=4, ExtRateLen=8, MCSSet[0]=0x0, MCSSet[1]=0x0)
[ 213.430823] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
[ 213.431158] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
[ 213.482448] DRS: unkown mode,default use 11N 1S AP
[ 213.482458] DRS: unkown mode (SupRateLen=4, ExtRateLen=8, MCSSet[0]=0x0, MCSSet[1]=0x0)
[ 229.907068] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
[ 229.907404] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
[ 229.969034] DRS: unkown mode,default use 11N 1S AP
[ 229.969044] DRS: unkown mode (SupRateLen=4, ExtRateLen=8, MCSSet[0]=0x0, MCSSet[1]=0x0)
[ 244.971404] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
[ 244.971734] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
[ 245.021797] DRS: unkown mode,default use 11N 1S AP
[ 245.021807] DRS: unkown mode (SupRateLen=4, ExtRateLen=8, MCSSet[0]=0x0, MCSSet[1]=0x0)
[ 260.024251] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
[ 260.024585] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
[ 260.177268] DRS: unkown mode,default use 11N 1S AP
[ 260.177278] DRS: unkown mode (SupRateLen=4, ExtRateLen=8, MCSSet[0]=0x0, MCSSet[1]=0x0)
[ 275.180038] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
[ 275.180355] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
[ 275.230225] DRS: unkown mode,default use 11N 1S AP
[ 275.230235] DRS: unkown mode (SupRateLen=4, ExtRateLen=8, MCSSet[0]=0x0, MCSSet[1]=0x0)
[ 290.233062] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
[ 290.233387] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
[ 290.283184] DRS: unkown mode,default use 11N 1S AP
[ 290.283194] DRS: unkown mode (SupRateLen=4, ExtRateLen=8, MCSSet[0]=0x0, MCSSet[1]=0x0)
[ 298.373848] DRS: unkown mode,default use 11N 1S AP
[ 298.373858] DRS: unkown mode (SupRateLen=4, ExtRateLen=8, MCSSet[0]=0x0, MCSSet[1]=0x0)
[ 301.378188] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
[ 313.374958] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
[ 313.375286] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
[ 313.425680] DRS: unkown mode,default use 11N 1S AP
[ 313.425690] DRS: unkown mode (SupRateLen=4, ExtRateLen=8, MCSSet[0]=0x0, MCSSet[1]=0x0)
[ 328.426734] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
[ 328.426878] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
[ 328.478524] DRS: unkown mode,default use 11N 1S AP
[ 328.478534] DRS: unkown mode (SupRateLen=4, ExtRateLen=8, MCSSet[0]=0x0, MCSSet[1]=0x0)
[ 343.479569] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
[ 343.479893] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
[ 343.531614] DRS: unkown mode,default use 11N 1S AP
[ 343.531624] DRS: unkown mode (SupRateLen=4, ExtRateLen=8, MCSSet[0]=0x0, MCSSet[1]=0x0)
ted@ted-laptop:~$
ted@ted-laptop:~$ lsusb
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 045e:00cb Microsoft Corp. Basic Optical Mouse v2.0
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 0603:00f2 Novatek Microelectronics Corp.
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 090c:1000 Feiya Technology Corp. Flash Drive
Bus 003 Device 002: ID 1737:0078 Linksys
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
ted@ted-laptop:~$
ted@ted-laptop:~$ ifconfig
eth1 Link encap:Ethernet HWaddr 20:cf:30:4e:1b:66
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:27 Base address:0x4000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:124 errors:0 dropped:0 overruns:0 frame:0
TX packets:124 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:9456 (9.4 KB) TX bytes:9456 (9.4 KB)
wlan0 Link encap:Ethernet HWaddr 68:7f:74:84:e7:46
inet6 addr: fe80::6a7f:74ff:fe84:e746/64 Scope:Link
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:7949 errors:0 dropped:0 overruns:0 frame:0
TX packets:526 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1265932 (1.2 MB) TX bytes:34568 (34.5 KB)
ted@ted-laptop:
ted@ted-laptop:~$ iwconfig
lo no wireless extensions.
eth1 no wireless extensions.
wlan0 RTxx70 Wireless ESSID:"UPC075350" Nickname:"RT3070STA"
Mode:Managed Frequency=2.412 GHz Access Point: 90:E6:BA:35:753
Bit Rate=54 Mb/s
RTS thrff Fragment thrff
Link Quality=95/100 Signal level:-69 dBm Noise level:-83 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
ted@ted-laptop:~$
any help would be greatly appreciated.
ted
Bookmarks