Page 3 of 15 FirstFirst 1234513 ... LastLast
Results 21 to 30 of 145

Thread: Rosewill RNX-N150PC PCI Ralink 3060 chip driver instructions

  1. #21
    Join Date
    May 2010
    Beans
    8

    Question Re: Rosewill RNX-N150PC PCI Ralink 3060 chip driver instructions

    Code:
    make -C /home/ged/Plocha/2008_1225_RT3070_Linux_STA_v2.0.1.0/os/linux -f Makefile.6 install
    mkdir: adresář „/etc/Wireless“ nelze vytvořit: Soubor již existuje (file already exists)
    make[1]: Entering directory `/home/ged/Plocha/2008_1225_RT3070_Linux_STA_v2.0.1.0/os/linux'
    rm -rf /etc/Wireless/RT3070STA
    mkdir /etc/Wireless/RT3070STA
    cp /home/ged/Plocha/2008_1225_RT3070_Linux_STA_v2.0.1.0/RT3070STA.dat /etc/Wireless/RT3070STA/.
    cp: nelze získat informace o „/home/ged/Plocha/2008_1225_RT3070_Linux_STA_v2.0.1.0/RT3070STA.dat“: Adresář nebo soubor neexistuje (no such file or directory)
    make[1]: *** [install] Error 1
    make[1]: Leaving directory `/home/ged/Plocha/2008_1225_RT3070_Linux_STA_v2.0.1.0/os/linux'
    make: *** [install] Error 2
    Hi, I have the Edimax EW-7711 and no luck bringing it to live.

    I tried to follow this (on Ubuntu 10.10) and while running the make install of the driver, I got the error message above. Any suggestions please? I'm stuck.

    (running both make and make install as root)

    edit: http://www.ralinktech.com/license_us...V3TVRJeE53PT1D

    I installed the new one that you postet in another thread, and the make, make install went allright,

    but when I try running the driver, it says not found - how do I find the proper name of the driver?
    Last edited by eurik; February 21st, 2011 at 10:44 PM.

  2. #22
    Join Date
    May 2010
    Beans
    8

    Angry Re: Rosewill RNX-N150PC PCI Ralink 3060 chip driver instructions

    Found the module /lib/modules/2.6.35_25_generic/kernel/drivers/net/wireless/rt3562sta.ko but still getting the same error message - not found?!

  3. #23
    Join Date
    Jan 2006
    Location
    near Reading, PA USA
    Beans
    28
    Distro
    Ubuntu 10.10 Maverick Meerkat

    Re: Rosewill RNX-N150PC PCI Ralink 3060 chip driver instructions

    Been a while since I've been on here, but I just built a new system with an Atom D510 to use on my model railroad, and Ubuntu seemed like a natural. Since I have no way to do wired ethernet in the location where this machine will be, I picked up the Rosewill RNX-N250 card with the RT3062 chip. Basically after reading this and other threads which indicated that I would indeed be able to get it to work with 10.10.
    Machine build and install went fine, today I tried to follow the steps in this thread line by line - and got errors. Particularly, the sudo modprobe rt3562sta.ko reported that the file did not exist. However, I proceeded onward and added the blacklist entry for the RT2800PCI and rebooted - AND IT WORKED. I am wirelessly connecting just fine.
    I really can't explain, or even figure out how it would ever work when an important step clearly fails, but it does. So take heart if the process results in an error, it may not be as critical as it appears. In the README file included with the downloaded driver files mentions using insmod, and I tried that, but that told me the module was already there. That's why I decided to move on and add the blacklist and give it a try. I'm sure there's some really dumb reason it worked anyway, but I am by no means a Linux expert. My first taste was way back at 0.89a but I haven't been a regular user that entire time.

    --Randy

  4. #24
    Join Date
    Aug 2005
    Location
    South Carolina, USA
    Beans
    20,273
    Distro
    Ubuntu Development Release

    Re: Rosewill RNX-N150PC PCI Ralink 3060 chip driver instructions

    sudo modprobe rt3562sta.ko
    That's incorrect; it should be:
    Code:
    sudo modprobe rt3562sta
    The file extension .ko is not required.
    "Oh, Ubuntu, you are my favorite Linux-based operating system" --Dr. Sheldon Cooper, Ph.D.

  5. #25
    Join Date
    Jan 2006
    Location
    near Reading, PA USA
    Beans
    28
    Distro
    Ubuntu 10.10 Maverick Meerkat

    Re: Rosewill RNX-N150PC PCI Ralink 3060 chip driver instructions

    Quote Originally Posted by chili555 View Post
    That's incorrect; it should be:
    Code:
    sudo modprobe rt3562sta
    The file extension .ko is not required.
    Pretty sure I tried that too, same error, file does not exist.

    Of course, dare I speak too soon, I applied all the latest updates once I got the box online, and when I restarted - no wireless. I repeated the make and make install steps, rebooted, and was back in business.

    --Randy

  6. #26
    Join Date
    Jan 2009
    Location
    California, mostly
    Beans
    5
    Distro
    Ubuntu 10.04 Lucid Lynx

    Re: Rosewill RNX-N150PC PCI Ralink 3060 chip driver instructions

    Quote Originally Posted by cbutzon View Post
    I followed the instructions to install the driver for my wireless adapter, but it appears that it doesn't "see" any available networks (despite being 10 feet from a working access point). Here's some info that MooPi suggested would be helpful:

    lspci -v | less:

    Code:
    05:00.0 Network controller: RaLink Device 3060
            Subsystem: RaLink Device 3060
            Flags: bus master, slow devsel, latency 32, IRQ 20
            Memory at fdcf0000 (32-bit, non-prefetchable) [size=64K]
            Capabilities: <access denied>
            Kernel driver in use: rt2800pci
            Kernel modules: rt3562sta, rt2800pci
    iwconfig:

    Code:
    lo        no wireless extensions.
    
    eth0      no wireless extensions.
    
    wlan0     IEEE 802.11bgn  ESSID:off/any  
              Mode:Managed  Access Point: Not-Associated   Tx-Power=20 dBm   
              Retry  long limit:7   RTS thr:off   Fragment thr:off
              Power Management:off
    iwlist scanning
    Code:
    lo        Interface doesn't support scanning.
    
    eth0      Interface doesn't support scanning.
    
    wlan0     No scan results
    Can someone please give me some guidance? Thanks in advance.

    EDIT: I also tried the "connect to a hidden wireless network" option and entered the WAP's name and WPA2 security key -- still no luck. For what it's worth, it connects just fine in Windows on the same machine.
    cbutzon,
    Did you have any luck getting it all working? I was having a similar issue. Everything working fine under 9.04, upgraded to 9.10, working great, upgraded to 10.04 and suddenly it was like my card working at all, not finding any wireless networks.

    In some setting or other I had noticed I had a "wlan0", but I had always used my "ra0" for my wireless interface in WICD. I tried a few things first (purgeing WICD and re-installing, no change), then I simply changed the wireless interface in the WICD preferences box and it started up right away.

    Hope you are up and running.

  7. #27
    Join Date
    Mar 2011
    Beans
    7

    Re: Rosewill RNX-N150PC PCI Ralink 3060 chip driver instructions

    Hello

    Just installed Ubuntu 10.10 and I have an Edimax EW-7711ln wireless card.

    I need to get it installed and drivered so I can get online but the problem is that I don't have a network card or even a network connection on the mobo becuase it's quite old so i can't even get online with it to download any drivers.

    I have a folder (don't know which version) with all the files inside.

    I was following the instructions on the first post on how to install the drivers and i've checked to see if GCC is installed and it is.

    Now i don't know what to do here where it says set

    HAS_WPA_SUPPLICANT=y
    When i open the file in the text editor, it's just an blank empty file. Do i need to add these lines or should there be code there already?

    Where can I get a driver that will work if this one is wrong or just help installing?

  8. #28
    Join Date
    Sep 2005
    Beans
    70

    Re: Rosewill RNX-N150PC PCI Ralink 3060 chip driver instructions

    AdRock952 the file should contain data already.

    I have just used the DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217.tg z driver to make my add-on NWP210 work.

    The file that you need to change 'HAS_WPA_SUPPLICANT=y' is in

    ... say I extracted the driver in

    /home/morgan/src/drivers/wlan_addon_NWP210/

    I would

    cd /home/morgan/src/drivers/wlan_addon_NWP210/DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217

    then edit (nano / vi / text editor)

    /home/morgan/src/drivers/wlan_addon_NWP210/DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217/os/linux/config.mk

    initially it will have

    --------------------------------
    # Support ATE function
    HAS_ATE=n

    # Support QA ATE function
    HAS_QA_SUPPORT=n

    # Support XLINK mode
    HAS_XLINK=n


    # Support Wpa_Supplicant
    HAS_WPA_SUPPLICANT=n

    # Support Native WpaSupplicant for Network Maganger
    HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=n

    #Support Net interface block while Tx-Sw queue full
    HAS_BLOCK_NET_IF=n

    #Support DFS function
    HAS_DFS_SUPPORT=n

    #Support Carrier-Sense function
    HAS_CS_SUPPORT=n


    # Support for Multiple Cards
    HAS_MC_SUPPORT=n

    #Support for PCI-MSI
    HAS_MSI_SUPPORT=n


    #Support for IEEE802.11e DLS
    HAS_QOS_DLS_SUPPORT=n

    #Support for EXT_CHANNEL
    HAS_EXT_BUILD_CHANNEL_LIST=n


    #Support for Net-SNMP
    HAS_SNMP_SUPPORT=n

    #Support features of 802.11n Draft3
    HAS_DOT11N_DRAFT3_SUPPORT=y

    #Support features of Single SKU.
    HAS_SINGLE_SKU_SUPPORT=n

    #Support features of 802.11n
    HAS_DOT11_N_SUPPORT=y

    ... lots more
    --------------------------------

    try downloading the file again

    Also extract with tar xfvz DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217.tg z

    - Does anyone know how to stop the ralink driver spamming dmesg?

    you then need to sudo make then sudo make install btw

  9. #29
    Join Date
    Mar 2011
    Beans
    7

    Re: Rosewill RNX-N150PC PCI Ralink 3060 chip driver instructions

    Thanks for your reply

    I downloaded it again and was now able to edit those lines.

    I ran the make and make install commands using sudo and i noticed that there were some warnings while compiling. Is that anything to worry about? It seemed to compile without any errors i think.

    The problem I have now is what folder do i need to be in when i run

    sudo modprobe rt3562sta
    Does it create the file in the /os/linux folder?

    I think i found the file there and I run that command inside of that folder but i don't know if has done anything becuase it goes back to command line with no message.

    EDIT:

    I think i got the driver created but i need to start it.

    I went into the driver folder, used the modprobe command and got this output

    FATAL Module rt3562sta.ko not found
    Here is my output like other users have shown

    lspci -v (only the related part)
    00:08.0 Network controller: RaLink Device 3060
    Subsystem: Edimax Computer Co. Device 7711
    Flags: bus master, slow devsel, latency 32, IRQ 18
    Memory at fbcf0000 (32-bit, non-prefetchable) [size=64K]
    Capabilities: <access denied>
    Kernel driver in use: rt2800pci
    Kernel modules: rt3562sta, rt2800pci
    iwconfig
    lo no wireless extensions.

    wlan0 IEEE 802.11bgn ESSIDff/any
    Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm
    Retry long limit:7 RTS thr:0ff Fragment thrff
    Power Managementff
    iwlist scanning
    lo Interface doesn't support scanning.

    wlan0 No scan results
    Last edited by AdRock952; March 8th, 2011 at 11:22 PM.

  10. #30
    Join Date
    Aug 2005
    Location
    South Carolina, USA
    Beans
    20,273
    Distro
    Ubuntu Development Release

    Re: Rosewill RNX-N150PC PCI Ralink 3060 chip driver instructions

    The problem I have now is what folder do i need to be in when i run

    Quote:
    sudo modprobe rt3562sta
    Does it create the file in the /os/linux folder?
    You can run the command anywhere. Once you have the module installed globally in your system, the inner workings of the command 'modprobe' take care of that for you. If there is an error, you will be notified.

    No real harm with warnings.
    "Oh, Ubuntu, you are my favorite Linux-based operating system" --Dr. Sheldon Cooper, Ph.D.

Page 3 of 15 FirstFirst 1234513 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •