I'm using wacom-driver 0.10.99 from git. Mouse cursor is not moving with pen.
I modified script a little bit:
Code:
DEVICE_NAME="WALTOP International Corp. Media Tablet stylus"
xsetwacom set "$DEVICE_NAME" Suppress "4" # data pt.s trimmed, default is 4, 0-20
xsetwacom set "$DEVICE_NAME" RawSample "2" # data pt.s filtered, default is 2, 0-100
xsetwacom set "$DEVICE_NAME" Threshold "27" # pressure, default is 27, range is 0-2047
xsetwacom set "$DEVICE_NAME" PressureCurve "5 10 90 95" # Bezier curve, default is 0,0,100,100
xsetwacom set "$DEVICE_NAME" TabletPCButton "on" # stylus tip + button, or "off" for hover mode
xsetwacom set "$DEVICE_NAME" Mode "Absolute" # or Relative cursor movement
Are these values sane? E.g. what mean 'Enable Touch'? Should area not be square? Should there been entry 'Wacom Screen Area'?
Code:
xinput list-props "WALTOP International Corp. Media Tablet stylus"
Device 'WALTOP International Corp. Media Tablet stylus':
Device Enabled (128): 1
Coordinate Transformation Matrix (130): 1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
Device Accel Profile (274): 0
Device Accel Constant Deceleration (275): 1.000000
Device Accel Adaptive Deceleration (276): 1.000000
Device Accel Velocity Scaling (277): 10.000000
Wacom Tablet Area (300): 0, 0, 16383, 16383
Wacom Rotation (301): 0
Wacom Pressurecurve (302): 5, 10, 90, 95
Wacom Serial IDs (303): 1280, 0, 2, 0
Wacom Capacity (304): -1
Wacom Pressure Threshold (305): 27
Wacom Sample and Suppress (306): 4, 2
Wacom Enable Touch (307): 0
Wacom Hover Click (308): 1
Wacom Enable Touch Gesture (309): 0
Wacom Touch Gesture Parameters (310): 50, 20, 250
Wacom Tool Type (311): "STYLUS" (296)
Wacom Button Actions (312): "None" (0), "None" (0), "None" (0), "None" (0), "None" (0), "None" (0), "None" (0), "None" (0), "None" (0), "None" (0), "None" (0), "None" (0), "None" (0), "None" (0), "None" (0), "None" (0)
Wacom Debug Levels (313): 0, 0
xinput test "WALTOP International Corp. Media Tablet stylus" prints same row each time I touch drawing area with pen:
motion a[0]=0 a[1]=0 a[2]=0 a[3]=0 a[4]=0 a[5]=-900
(But it detects when I touch it)
Bookmarks