I am running Maverick Meercat 10.10 with full Ubuntu Studio package.
I am added as an audio & video user.
I have run sudo modprobe raw1394
I am struggling to perform the firmware upgrade required to get my M-Audio FW Audiophile box to work. I have got Wine running + ffado but when I try and update the firmware I get errors.
1st problem (may be all of the problem) is when I run ffado-bridgeco-downloader
dmt@dmt-desktop: ffado-bridgeco-downloader
BridgeCo BeBoB platform firmware downloader
Part of the FFADO project -- www.ffado.org
Version: 2.999.0-
(C) 2008, Daniel Wagner, Pieter Palmers
This program comes with ABSOLUTELY NO WARRANTY.
-----------------------------------------------
Node id GUID Vendor - Model
0 0x000d6c0310ed4910 'M-AUDIO' - 'FW Audiophile Bootloader '
00459055666: Error (configrom.cpp)[ 150] initialize: Could not parse config rom of node 1 on port 0
no message buffer overruns
in other posts I have seen there is another device recognised at node id 1 - so I am wondering what I am doing wrong or if the box is ok. It runs fine with $windows.
I then tried to update the firmware anyway but got checksum/CRC errors . . .
dmt@dmt-desktop:~$ ffado-bridgeco-downloader 0x000d6c0310ed4910 firmware /home/dmt/fwap.bcd -m 0x001807198000LL
-----------------------------------------------
BridgeCo BeBoB platform firmware downloader
Part of the FFADO project -- www.ffado.org
Version: 2.999.0-
(C) 2008, Daniel Wagner, Pieter Palmers
This program comes with ABSOLUTELY NO WARRANTY.
-----------------------------------------------
YOU HAVE SPECIFIED THE CORRECT MAGIC NUMBER.
HENCE YOU ACCEPT THE RISKS INVOLVED.
05248277654: Warning (ieee1394service.cpp)[ 375] initialize: Could not set SPLIT_TIMEOUT to min requested (1000000)
05248277704: Warning (ieee1394service.cpp)[ 379] initialize: Set SPLIT_TIMEOUT to min requested (1000000) did not succeed
05248358186: Error (configrom.cpp)[ 150] initialize: Could not parse config rom of node 1 on port 0
05248500201: (configrom.cpp)[ 583] printConfigRom: Config ROM
05248500247: (configrom.cpp)[ 584] printConfigRom: Current Node Id: 0
05248500260: (configrom.cpp)[ 585] printConfigRom: GUID: 0x000D6C0310ED4910
05248500278: (configrom.cpp)[ 586] printConfigRom: Vendor Name: M-AUDIO
05248500292: (configrom.cpp)[ 587] printConfigRom: Model Name: FW Audiophile Bootloader
05248500309: (configrom.cpp)[ 588] printConfigRom: Node Vendor ID: 0x000d6c
05248500321: (configrom.cpp)[ 589] printConfigRom: Model Id: 0x00010060
05248500337: (configrom.cpp)[ 590] printConfigRom: Unit Specifier ID: 0x00a02d
05248500348: (configrom.cpp)[ 591] printConfigRom: Unit version: 0x00014001
05248500364: (configrom.cpp)[ 592] printConfigRom: ISO resource manager: 0
05248500376: (configrom.cpp)[ 593] printConfigRom: Cycle master capable: 0
05248500391: (configrom.cpp)[ 594] printConfigRom: Bus manager capable: 0
05248500404: (configrom.cpp)[ 595] printConfigRom: Cycle clock accuracy: 100
05248500420: (configrom.cpp)[ 596] printConfigRom: Max rec: 8 (max asy payload: 512 bytes)
Info Registers
Manufactors Id: bridgeCo
Protocol Version: 0x00000001
Bootloader Version: 0x00002803
GUID: 0x000d6c0300ed4910
Hardware Model ID: 0x0000000d
Hardware Revision: 0x00000001
Software Date: 04.05.2007, 10:22:12
Software Id: 0x00010060
Software Version: 0x00ffffff
Base Address: 0x20080000
Max. Image Len: 0x00180000
Bootloader Date: 06.10.2003, 10:00:41
Debugger Id: 0x00000000
Debugger Version: 0x00000000
parse BCD file
05248572830: Error (bebob_dl_bcd.cpp)[ 358] checkHeaderCRC: checkHeaderCRC: CRC check failed, 0xe3c4bb1e expected, 0x42f50400 calculated
05248572865: Error (bebob_dl_bcd.cpp)[ 180] parse: parse: Header CRC check failed
05248572876: Error (bebob_dl_mgr.cpp)[ 249] downloadFirmware: downloadFirmware: BCD parsing failed
Failed to download firmware
no message buffer overruns
also I can't seem to get the envy24 programme to run at all . . .
any ideas anyone - thanks . . .
Bookmarks