Page 48 of 60 FirstFirst ... 38464748495058 ... LastLast
Results 471 to 480 of 594

Thread: How To Compile the new 2.6.16 kernel from kernel.org

  1. #471
    Join Date
    Jun 2006
    Location
    Florida
    Beans
    11
    Distro
    Ubuntu 7.04 Feisty Fawn

    Re: How To Compile the new 2.6.16 kernel from kernel.org

    I was on step 13 or so (can't remember which one now but it is below) and I got this huge error message. What's wrong? I'm fairly new to Linux so I don't know too mcuh.

    root@*******:/usr/src/linux# make xconfig
    PHP Code:
    HOSTCC  scripts/basic/fixdep
      HOSTCC  scripts
    /basic/split-include
      
    HOSTCC  scripts/basic/docproc
      CHECK   qt
      HOSTCC  scripts
    /kconfig/conf.o
    sed 
    scripts/kconfig/lkc_proto.scripts/kconfig/lkc_defs.'s/P(\([^,]*\),.*/#define \1 (\*\1_p)/'
      
    HOSTCC  scripts/kconfig/kconfig_load.o
      HOSTCC  scripts
    /kconfig/kxgettext.o
      HOSTCC  scripts
    /kconfig/mconf.o
      SHIPPED scripts
    /kconfig/zconf.tab.c
      SHIPPED scripts
    /kconfig/lex.zconf.c
      SHIPPED scripts
    /kconfig/zconf.hash.c
      HOSTCC  scripts
    /kconfig/zconf.tab.o
    /usr/bin/moc -i scripts/kconfig/qconf.-o scripts/kconfig/qconf.moc
      HOSTCXX scripts
    /kconfig/qconf.o
      HOSTLD  scripts
    /kconfig/qconf
    scripts
    /kconfig/qconf arch/i386/Kconfig
    X Error
    BadDeviceinvalid or uninitialized input device 166
      Major opcode
    :  144
      Minor opcode
    :  3
      Resource id
    :  0x0
    Failed to open device
    X Error
    BadDeviceinvalid or uninitialized input device 166
      Major opcode
    :  144
      Minor opcode
    :  3
      Resource id
    :  0x0
    Failed to open device
    Session management error
    Authentication Rejectedreason None of the authentication protocols specified are supported and host-based authentication failed
    #
    # using defaults found in .config
    #
    .config:19:warningtrying to assign nonexistent symbol CLEAN_COMPILE
    .config:39:warningtrying to assign nonexistent symbol KOBJECT_UEVENT
    .config:54:warningtrying to assign nonexistent symbol CC_ALIGN_FUNCTIONS
    .config:55:warningtrying to assign nonexistent symbol CC_ALIGN_LABELS
    .config:56:warningtrying to assign nonexistent symbol CC_ALIGN_LOOPS
    .config:57:warningtrying to assign nonexistent symbol CC_ALIGN_JUMPS
    .config:67:warningtrying to assign nonexistent symbol OBSOLETE_MODPARM
    .config:144:warningtrying to assign nonexistent symbol ENABLE_ALT_SMP
    .config:170:warningtrying to assign nonexistent symbol 05GB
    .config:171:warningtrying to assign nonexistent symbol 1GB
    .config:172:warningtrying to assign nonexistent symbol 2GB
    .config:173:warningtrying to assign nonexistent symbol 3GB
    .config:216:warningtrying to assign nonexistent symbol ACPI_SBS
    .config:227:warningtrying to assign nonexistent symbol ACPI_PCC
    .config:228:warningtrying to assign nonexistent symbol ACPI_SONY
    .config:236:warningtrying to assign nonexistent symbol ACPI_TC1100
    .config:237:warningtrying to assign nonexistent symbol ACPI_INITRD
    .config:238:warningtrying to assign nonexistent symbol ACPI_DEV
    .config:310:warningtrying to assign nonexistent symbol PCI_LEGACY_PROC
    .config:344:warningtrying to assign nonexistent symbol PCMCIA_PROBE_MEM
    .config:485:warningtrying to assign nonexistent symbol IP_NF_MATCH_LIMIT
    .config:487:warningtrying to assign nonexistent symbol IP_NF_MATCH_MAC
    .config:488:warningtrying to assign nonexistent symbol IP_NF_MATCH_PKTTYPE
    .config:489:warningtrying to assign nonexistent symbol IP_NF_MATCH_MARK
    .config:490:warningtrying to assign nonexistent symbol IP_NF_MATCH_MULTIPORT
    .config:495:warningtrying to assign nonexistent symbol IP_NF_MATCH_AH_ESP
    .config:496:warningtrying to assign nonexistent symbol IP_NF_MATCH_LENGTH
    .config:498:warningtrying to assign nonexistent symbol IP_NF_MATCH_TCPMSS
    .config:499:warningtrying to assign nonexistent symbol IP_NF_MATCH_HELPER
    .config:500:warningtrying to assign nonexistent symbol IP_NF_MATCH_STATE
    .config:501:warningtrying to assign nonexistent symbol IP_NF_MATCH_CONNTRACK
    .config:503:warningtrying to assign nonexistent symbol IP_NF_MATCH_PHYSDEV
    .config:505:warningtrying to assign nonexistent symbol IP_NF_MATCH_REALM
    .config:506:warningtrying to assign nonexistent symbol IP_NF_MATCH_SCTP
    .config:507:warningtrying to assign nonexistent symbol IP_NF_MATCH_DCCP
    .config:508:warningtrying to assign nonexistent symbol IP_NF_MATCH_COMMENT
    .config:509:warningtrying to assign nonexistent symbol IP_NF_MATCH_CONNMARK
    .config:510:warningtrying to assign nonexistent symbol IP_NF_MATCH_CONNBYTES
    .config:512:warningtrying to assign nonexistent symbol IP_NF_MATCH_STRING
    .config:518:warningtrying to assign nonexistent symbol IP_NF_TARGET_NFQUEUE
    .config:535:warningtrying to assign nonexistent symbol IP_NF_TARGET_MARK
    .config:536:warningtrying to assign nonexistent symbol IP_NF_TARGET_CLASSIFY
    .config:538:warningtrying to assign nonexistent symbol IP_NF_TARGET_CONNMARK
    .config:541:warningtrying to assign nonexistent symbol IP_NF_TARGET_NOTRACK
    .config:551:warningtrying to assign nonexistent symbol IP6_NF_MATCH_LIMIT
    .config:552:warningtrying to assign nonexistent symbol IP6_NF_MATCH_MAC
    .config:557:warningtrying to assign nonexistent symbol IP6_NF_MATCH_MULTIPORT
    .config:559:warningtrying to assign nonexistent symbol IP6_NF_MATCH_MARK
    .config:561:warningtrying to assign nonexistent symbol IP6_NF_MATCH_AHESP
    .config:562:warningtrying to assign nonexistent symbol IP6_NF_MATCH_LENGTH
    .config:564:warningtrying to assign nonexistent symbol IP6_NF_MATCH_PHYSDEV
    .config:568:warningtrying to assign nonexistent symbol IP6_NF_TARGET_NFQUEUE
    .config:570:warningtrying to assign nonexistent symbol IP6_NF_TARGET_MARK
    .config:619:warningtrying to assign nonexistent symbol IP_DCCP_UNLOAD_HACK
    .config:838:warningtrying to assign nonexistent symbol IEEE80211_1_1_13
    .config:839:warningtrying to assign nonexistent symbol IEEE80211_1_1_13_CRYPT_WEP
    .config:840:warningtrying to assign nonexistent symbol IEEE80211_1_1_13_CRYPT_CCMP
    .config:841:warningtrying to assign nonexistent symbol IEEE80211_1_1_13_CRYPT_TKIP
    .config:904:warningtrying to assign nonexistent symbol MTD_CFI_AMDSTD_RETRY
    .config:949:warningtrying to assign nonexistent symbol MTD_BLKMTD
    .config:1053:warningtrying to assign nonexistent symbol BLK_DEV_CLOOP
    .config:1064:warningtrying to assign nonexistent symbol BLK_DEV_GNBD
    .config:1085:warningtrying to assign nonexistent symbol BLK_DEV_IDEACPI
    .config:1094:warningsymbol value 'm' invalid for BLK_DEV_IDEPNP
    .config:1126:warningtrying to assign nonexistent symbol PDC202XX_FORCE
    .config:1169:warningtrying to assign nonexistent symbol SCSI_SPI2_ATTRS
    .config:1177:warningtrying to assign nonexistent symbol SAS_CLASS
    .config:1178:warningtrying to assign nonexistent symbol SAS_DEBUG
    .config:1192:warningtrying to assign nonexistent symbol SCSI_AIC94XX
    .config:1193:warningtrying to assign nonexistent symbol AIC94XX_DEBUG
    .config:1212:warningtrying to assign nonexistent symbol SCSI_ARCMSR
    .config:1234:warningtrying to assign nonexistent symbol SCSI_SATA_ACPI
    .config:1282:warningtrying to assign nonexistent symbol SCSI_QLA2XXX
    .config:1287:warningtrying to assign nonexistent symbol SCSI_QLA6312
    .config:1390:warningtrying to assign nonexistent symbol IEEE1394_CMP
    .config:1544:warningtrying to assign nonexistent symbol R1000
    .config:1567:warningtrying to assign nonexistent symbol NET_IPG
    .config:1618:warningtrying to assign nonexistent symbol IPW2100_FS_AMILO_M7400.config:1640:warningtrying to assign nonexistent symbol ADM8211
    .config:1651:warningtrying to assign nonexistent symbol WLAN_NG
    .config:1652:warningtrying to assign nonexistent symbol PRISM2
    .config:1653:warningtrying to assign nonexistent symbol PRISM2_USB
    .config:1654:warningtrying to assign nonexistent symbol PRISM2_PCI
    .config:1655:warningtrying to assign nonexistent symbol PRISM2_PLX
    .config:1656:warningtrying to assign nonexistent symbol PRISM2_CS
    .config:1657:warningtrying to assign nonexistent symbol NET_ACX
    .config:1658:warningtrying to assign nonexistent symbol NET_ACX_PCI
    .config:1659:warningtrying to assign nonexistent symbol NET_ACX_USB
    .config:1667:warningtrying to assign nonexistent symbol PRISM54_SOFTMAC
    .config:1668:warningtrying to assign nonexistent symbol NET_RT2600
    .config:1669:warningtrying to assign nonexistent symbol NET_RT2500
    .config:1670:warningtrying to assign nonexistent symbol NET_RT2400
    .config:1671:warningtrying to assign nonexistent symbol NET_RTL818X
    .config:1672:warningtrying to assign nonexistent symbol NET_RTL8187
    .config:1673:warningtrying to assign nonexistent symbol IPW3945
    .config:1674:warningtrying to assign nonexistent symbol IPW3945_DEBUG
    .config:1675:warningtrying to assign nonexistent symbol IPW3945_MONITOR
    .config:1676:warningtrying to assign nonexistent symbol NET_MRV8K
    .config:1725:warningtrying to assign nonexistent symbol VENDOR_SANGOMA
    .config:1791:warningtrying to assign nonexistent symbol NDISWRAPPER
    .config:1943:warningtrying to assign nonexistent symbol MISDN_DRV
    .config:1944:warningtrying to assign nonexistent symbol MISDN_MEMDEBUG
    .config:1945:warningtrying to assign nonexistent symbol MISDN_AVM_FRITZ
    .config:1946:warningtrying to assign nonexistent symbol MISDN_HFCPCI
    .config:1947:warningtrying to assign nonexistent symbol MISDN_HFCMULTI
    .config:1948:warningtrying to assign nonexistent symbol MISDN_HFCUSB
    .config:1949:warningtrying to assign nonexistent symbol MISDN_SPEEDFAX
    .config:1950:warningtrying to assign nonexistent symbol MISDN_W6692
    .config:1951:warningtrying to assign nonexistent symbol MISDN_DSP
    .config:2030:warningtrying to assign nonexistent symbol INPUT_ACERHK
    .config:2055:warningtrying to assign nonexistent symbol ECC
    .config:2084:warningtrying to assign nonexistent symbol SERIAL_8250_ACPI
    .config:2284:warningtrying to assign nonexistent symbol SENSORS_RTC8564
    .config:2286:warningtrying to assign nonexistent symbol RTC_X1205_I2C
    .config:2296:warningtrying to assign nonexistent symbol W1_MATROX
    .config:2297:warningtrying to assign nonexistent symbol W1_DS9490
    .config:2298:warningtrying to assign nonexistent symbol W1_DS9490_BRIDGE
    .config:2299:warningtrying to assign nonexistent symbol W1_THERM
    .config:2300:warningtrying to assign nonexistent symbol W1_SMEM
    .config:2302:warningtrying to assign nonexistent symbol W1_DS2433_CRC
    .config:2350:warningtrying to assign nonexistent symbol AVERATEC_5100P
    .config:2351:warningtrying to assign nonexistent symbol PACKARDBELL_E5
    .config:2405:warningtrying to assign nonexistent symbol VIDEO_AUDIO_DECODER
    .config:2406:warningtrying to assign nonexistent symbol VIDEO_DECODER
    .config:2502:warningtrying to assign nonexistent symbol DVB_TDA80XX
    .config:2524:warningtrying to assign nonexistent symbol DVB_ATMEL_AT76C651
    .config:2532:warningtrying to assign nonexistent symbol DVB_NXT2002
    .config:2545:warningtrying to assign nonexistent symbol DXR3
    .config:2546:warningtrying to assign nonexistent symbol EM8300
    .config:2547:warningtrying to assign nonexistent symbol EM8300_LOOPBACK
    .config:2548:warningtrying to assign nonexistent symbol EM8300_UCODETIMEOUT
    .config:2549:warningtrying to assign nonexistent symbol EM8300_DICOMFIX
    .config:2550:warningtrying to assign nonexistent symbol EM8300_DICOMCTRL
    .config:2551:warningtrying to assign nonexistent symbol EM8300_DICOMPAL
    .config:2552:warningtrying to assign nonexistent symbol ADV717X
    .config:2553:warningtrying to assign nonexistent symbol ADV717X_SWAP
    .config:2554:warningtrying to assign nonexistent symbol ADV717X_PIXELPORT16BIT.config:2555:warningtrying to assign nonexistent symbol ADV717X_PIXELPORTPAL
    .config:2556:warningtrying to assign nonexistent symbol BT865
    .config:2582:warningsymbol value 'm' invalid for FB_VESA
    .config:2603:warningtrying to assign nonexistent symbol FB_RADEON_OLD
    .config:2611:warningtrying to assign nonexistent symbol FB_ATY_XL_INIT
    .config:2630:warningtrying to assign nonexistent symbol FB_IMAC
    .config:2680:warningtrying to assign nonexistent symbol SND_GENERIC_DRIVER
    .config:2793:warningtrying to assign nonexistent symbol BT_ALSA
    .config:2799:warningtrying to assign nonexistent symbol OBSOLETE_OSS_DRIVER
    .config:2867:warningtrying to assign nonexistent symbol OBSOLETE_OSS_USB_DRIVER
    .config:2908:warningtrying to assign nonexistent symbol USB_MTOUCH
    .config:2909:warningtrying to assign nonexistent symbol USB_ITMTOUCH
    .config:2910:warningtrying to assign nonexistent symbol USB_EGALAX
    .config:2917:warningtrying to assign nonexistent symbol USB_SYNAPTICS
    .config:2918:warningtrying to assign nonexistent symbol USB_CPADDEV
    .config:2939:warningtrying to assign nonexistent symbol USB_QC
    .config:2940:warningtrying to assign nonexistent symbol USB_SPCA5XX
    .config:2941:warningtrying to assign nonexistent symbol USB_PODXTPRO
    .config:2943:warningtrying to assign nonexistent symbol USB_OV511_DECOMP
    .config:2944:warningtrying to assign nonexistent symbol USB_OV518_DECOMP
    .config:2968:warningtrying to assign nonexistent symbol USB_EAGLE
    .config:2969:warningtrying to assign nonexistent symbol USB_ZD1211
    .config:2970:warningtrying to assign nonexistent symbol USB_ATMEL
    .config:2971:warningtrying to assign nonexistent symbol USB_RT2570
    .config:3179:warningtrying to assign nonexistent symbol RELAYFS_FS
    .config:3188:warningtrying to assign nonexistent symbol ASFS_FS
    .config:3189:warningtrying to assign nonexistent symbol ASFS_DEFAULT_CODEPAGE
    .config:3190:warningtrying to assign nonexistent symbol ASFS_RW
    .config:3209:warningtrying to assign nonexistent symbol SQUASHFS
    .config:3210:warningtrying to assign nonexistent symbol SQUASHFS_1_0_COMPATIBILITY
    .config:3211:warningtrying to assign nonexistent symbol SQUASHFS_2_0_COMPATIBILITY
    .config:3219:warningtrying to assign nonexistent symbol UNION_FS
    .config:3266:warningtrying to assign nonexistent symbol GFS_FS
    .config:3267:warningtrying to assign nonexistent symbol GFS_FS_LOCK_HARNESS
    .config:3388:warningtrying to assign nonexistent symbol SECURITY_REALTIME
    .config:3453:warningtrying to assign nonexistent symbol CLUSTER
    .config:3459:warningtrying to assign nonexistent symbol X86_HT_DISABLE
    make
    [1]: *** waitNo child processes.  Stop.
    make[1]: *** Waiting for unfinished jobs....
    make[1]: *** waitNo child processes.  Stop.
    make: *** waitNo child processes.  Stop.
    make: *** Waiting for unfinished jobs....
    make: *** waitNo child processes.  Stop

  2. #472
    Join Date
    May 2006
    Location
    London
    Beans
    23
    Distro
    Dapper Drake Testing/

    Re: How To Compile the new 2.6.16 kernel from kernel.org

    1. Download the patch and apply it to an old kernel directoy (2.6.16.20, etc.
    What is the command to do this? As I am still unable to compile the kernel from scratch. Where do I download the ck patches from?

  3. #473
    Join Date
    Jan 2006
    Beans
    1,113
    Distro
    Ubuntu 7.10 Gutsy Gibbon

    Re: How To Compile the new 2.6.16 kernel from kernel.org

    Quote Originally Posted by ravpaul
    What is the command to do this? As I am still unable to compile the kernel from scratch. Where do I download the ck patches from?
    Ck, performance patches, can be found here. Patches for upgrading your kernel can be found on the kernel.org homepage.

  4. #474
    Join Date
    May 2006
    Beans
    188

    Re: Error running "How To Compile the new 2.6.16 kernel from kernel.org"

    Hi,
    I tried to follow the outline procedure to upgrade my Kubuntu 6.0.6 (fully updated) from (current) kernel 2.6.15-25-386 to 2.6.17.1 (full kernel, no patches).
    The first 12 stages were OK. Entering stage 13 (make xconfig) it erred stating it can't connect to the X server (output follows). Please advise !

    TIA

    ====last stage output========
    root@Atlantis:/usr/src/linux# pwd
    /usr/src/linux
    root@Atlantis:/usr/src/linux# uname -r
    2.6.15-25-386
    root@Atlantis:/usr/src/linux# cp /boot/config-2.6.15-25-386 .config
    root@Atlantis:/usr/src/linux# make xconfig
    CHECK qt
    sed < scripts/kconfig/lkc_proto.h > scripts/kconfig/lkc_defs.h 's/P(\([^,]*\),.*/#define \1 (\*\1_p)/'
    HOSTCC scripts/kconfig/kconfig_load.o
    HOSTCC scripts/kconfig/kxgettext.o
    HOSTCC scripts/kconfig/mconf.o
    SHIPPED scripts/kconfig/zconf.tab.c
    SHIPPED scripts/kconfig/lex.zconf.c
    SHIPPED scripts/kconfig/zconf.hash.c
    HOSTCC scripts/kconfig/zconf.tab.o
    /usr/bin/moc -i scripts/kconfig/qconf.h -o scripts/kconfig/qconf.moc
    HOSTCXX scripts/kconfig/qconf.o
    HOSTLD scripts/kconfig/qconf
    scripts/kconfig/qconf arch/i386/Kconfig
    Xlib: connection to ":0.0" refused by server
    Xlib: No protocol specified

    qconf: cannot connect to X server :0.0
    make[1]: *** [xconfig] Error 1
    make: *** [xconfig] Error 2
    =========end of output=========
    Regards,

    Michael Badt

  5. #475
    Join Date
    Dec 2005
    Beans
    24

    Re: How To Compile the new 2.6.16 kernel from kernel.org

    don't do "make xconfig" as root. root does not have permission to use the xserver (i.e. the display).

    from your normal account, do this:

    sudo make xconfig

    -James

  6. #476
    Join Date
    Jan 2006
    Location
    Raleigh, NC
    Beans
    131
    Distro
    Ubuntu 6.10 Edgy

    Re: How To Compile the new 2.6.16 kernel from kernel.org

    Whenever I use this method to install a new kernel I loose the use of my Toshiba hotkeys, like display brightness. I copied the .config file over like it says to do, so shouldn't whatever option it is that corresponds to them get checked?
    I have always wished for a computer that would be as easy to use as my telephone. My wish came true. I no longer know how to use my telephone.
    --Bjarne Stroustrup

  7. #477
    Join Date
    Jun 2006
    Beans
    71
    Distro
    Ubuntu 10.04 Lucid Lynx

    Re: How To Compile the new 2.6.16 kernel from kernel.org

    has anyone got Graphics Card and Wireless working on Acer Aspire 5672 after u install kernel 2.6.17??
    Laptop:
    Acer Aspire 5672WLMi
    Intel Core Duo T2600 (2.16), 15.4" WXGA, ATI MOBILITY Radeon x1400 128M, RAM 4GB DDR II, 250G SATA Windows 7 + Ubuntu 10.04

  8. #478
    Join Date
    Jun 2005
    Location
    Cambridge, UK
    Beans
    175

    Re: How To Compile the new 2.6.16 kernel from kernel.org

    I can't seem to get the fglrx module to compile. I've installed the source with
    sudo apt-get install fglrx-kernel-source
    as suggested in the guide but when i make the kernel package i get
    IGNORE_CC_MISMATCH=1 CC="gcc-4.0" /usr/bin/make -C /usr/src/modules/fglrx-kernel/fglrx/build_mod/2.6.x -f Makefile SYSSRC=/usr/src/linux KBUILD_PARAMS="-C /usr/src/linux SUBDIRS=/usr/src/modules/fglrx-kernel/fglrx/build_mod/2.6.x"
    make[3]: Entering directory `/usr/src/modules/fglrx-kernel/fglrx/build_mod/2.6.x'
    make[3]: Makefile: No such file or directory
    make[3]: *** No rule to make target `Makefile'. Stop.
    make[3]: Leaving directory `/usr/src/modules/fglrx-kernel/fglrx/build_mod/2.6.x'
    make[2]: *** [build-stamp] Error 2
    make[2]: Leaving directory `/usr/src/modules/fglrx-kernel'
    make[1]: *** [kdist_image] Error 2
    make[1]: Leaving directory `/usr/src/modules/fglrx-kernel'
    Module /usr/src/modules/fglrx-kernel failed.
    Hit return to Continue

    Any suggestions?
    Jeremy

  9. #479
    Join Date
    Sep 2005
    Location
    Salem, Oregon
    Beans
    51
    Distro
    Ubuntu Karmic Koala (testing)

    Re: How To Compile the new 2.6.16 kernel from kernel.org

    Quote Originally Posted by xXx 0wn3d xXx
    Ck, performance patches, can be found here. Patches for upgrading your kernel can be found on the kernel.org homepage.

    xXx 0wn3d xXx
    So do you always need to use the Ck patch with the same version of the kernel? Like 2.6.17 kernel you would want to use the patch-2.6.17-ck1.bz2?

    Cause I am running the 2.6.17 without the patch-2.6.17-ck1.bz2 and all seems very well.

  10. #480
    Join Date
    May 2006
    Beans
    188

    Re: How To Compile the new 2.6.16 kernel from kernel.org

    Thanks James,
    I followed your suggestion and got the follwing message:
    "make: *** No rule to make target `xconfig'. Stop."
    To clarify, here is the contents of my /usr/src at this stage.

    Any Idea?
    TIA

    ------------my /usr/src------------
    miki@Atlantis:/usr/src$ pwd
    /usr/src
    miki@Atlantis:/usr/src$ ls -l
    total 40360
    lrwxrwxrwx 1 root src 23 2006-06-21 05:31 linux -> /usr/src/linux-2.6.17.1
    drwxrwxrwx 19 root root 4096 2006-06-20 17:55 linux-2.6.17.1
    -rw-r--r-- 1 root src 41276465 2006-06-20 17:33 linux-2.6.17.1.tar.bz2
    ---------------end-----------------------

    ---------contents of my /usr/src/linux----------------------
    miki@Atlantis:/usr/src/linux$ ls -a
    . block CREDITS drivers include Kbuild MAINTAINERS net scripts usr
    .. .config crypto fs init kernel Makefile README security
    arch COPYING Documentation .gitignore ipc lib mm REPORTING-BUGS sound
    ---------end-----------------------------------------------


    Quote Originally Posted by jamuir
    don't do "make xconfig" as root. root does not have permission to use the xserver (i.e. the display).

    from your normal account, do this:

    sudo make xconfig

    -James
    Regards,

    Michael Badt

Page 48 of 60 FirstFirst ... 38464748495058 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •