#lsusb
...
Bus 002 Device 002: ID 148f:2573 Ralink Technology, Corp. RT2501USB Wireless Adapter
Bus 001 Device 003: ID 0846:9030 NetGear, Inc.
...
#uname -rm
2.6.32-26-generic x86_64
#lsmod | grep ath9k
(nothing!!!)
#dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-26-generic (buildd@crested) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #46-Ubuntu SMP Tue Oct 26 16:47:18 UTC 2010 (Ubuntu 2.6.32-26.46-generic 2.6.32.24+drm33.11)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-26-generic root=UUID=153ef51e-5bb5-4326-9d6d-752eda07ad37 ro quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b000 (usable)
[ 0.000000] BIOS-e820: 000000000009b000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffa0000 (usable)
[ 0.000000] BIOS-e820: 00000000bffa0000 - 00000000bffae000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bffae000 - 00000000bffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bffe0000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbffa0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009b000 (usable)
[ 0.000000] modified: 000000000009b000 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000bffa0000 (usable)
[ 0.000000] modified: 00000000bffa0000 - 00000000bffae000 (ACPI data)
[ 0.000000] modified: 00000000bffae000 - 00000000bffe0000 (ACPI NVS)
[ 0.000000] modified: 00000000bffe0000 - 00000000c0000000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bffa0000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] 0000000000 - 00bfe00000 page 2M
[ 0.000000] 00bfe00000 - 00bffa0000 page 4k
[ 0.000000] kernel direct mapping tables up to bffa0000 @ 10000-15000
[ 0.000000] RAMDISK: 377fb000 - 37fef535
[ 0.000000] ACPI: RSDP 00000000000fc440 00014 (v00 HPQOEM)
[ 0.000000] ACPI: RSDT 00000000bffa0000 00044 (v01 HPQOEM SLIC-CPC 20080905 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bffa0200 00084 (v02 HPQOEM SLIC-CPC 20080905 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bffa0440 04E91 (v01 HPQOEM SLIC-CPC 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000bffae000 00040
[ 0.000000] ACPI: APIC 00000000bffa0390 0006C (v01 HPQOEM SLIC-CPC 20080905 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bffa0400 0003C (v01 HPQOEM SLIC-CPC 20080905 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bffae040 00072 (v01 HPQOEM SLIC-CPC 20080905 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000bffa52e0 00038 (v01 HPQOEM SLIC-CPC 20080905 MSFT 00000097)
[ 0.000000] ACPI: GSCI 00000000bffae0c0 02024 (v01 HPQOEM SLIC-CPC 20080905 MSFT 00000097)
[ 0.000000] ACPI: SLIC 00000000bffb00f0 00176 (v01 HPQOEM SLIC-CPC 00000001 MSFT 00000001)
[ 0.000000] ACPI: SSDT 00000000bffb14b0 0082F (v01 HPQOEM SLIC-CPC 00000012 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000000bffa0000
[ 0.000000] Bootmem setup node 0 0000000000000000-00000000bffa0000
[ 0.000000] NODE_DATA [0000000000013000 - 0000000000017fff]
[ 0.000000] bootmap [0000000000018000 - 000000000002fff7] pages 18
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 00bffa0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001a2fa64] TEXT DATA BSS ==> [0001000000 - 0001a2fa64]
[ 0.000000] #3 [00377fb000 - 0037fef535] RAMDISK ==> [00377fb000 - 0037fef535]
[ 0.000000] #4 [000009b000 - 0000100000] BIOS reserved ==> [000009b000 - 0000100000]
[ 0.000000] #5 [0001a30000 - 0001a307cc] BRK ==> [0001a30000 - 0001a307cc]
[ 0.000000] #6 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000]
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] [ffffea0000000000-ffffea00029fffff] PMD -> [ffff880002000000-ffff8800049fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009b
[ 0.000000] 0: 0x00000100 -> 0x000bffa0
[ 0.000000] On node 0 totalpages: 786219
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 107 pages reserved
[ 0.000000] DMA zone: 3816 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10695 pages used for memmap
[ 0.000000] DMA32 zone: 771545 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001c00000 s91544 r8192 d23144 u524288
[ 0.000000] pcpu-alloc: s91544 r8192 d23144 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 775361
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-26-generic root=UUID=153ef51e-5bb5-4326-9d6d-752eda07ad37 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3082588k/3145344k available (5421k kernel code, 468k absent, 62288k reserved, 2980k data, 876k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:440
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 31457280 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2400.085 MHz processor.
[ 0.010006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.17 BogoMIPS (lpj=24000850)
[ 0.010033] Security Framework initialized
[ 0.010051] AppArmor: AppArmor initialized
[ 0.010408] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.013842] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.015523] Mount-cache hash table entries: 256
[ 0.015689] Initializing cgroup subsys ns
[ 0.015694] Initializing cgroup subsys cpuacct
[ 0.015697] Initializing cgroup subsys memory
[ 0.015706] Initializing cgroup subsys devices
[ 0.015708] Initializing cgroup subsys freezer
[ 0.015710] Initializing cgroup subsys net_cls
[ 0.015732] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.015734] CPU: L2 cache: 4096K
[ 0.015737] CPU 0/0x0 -> Node 0
[ 0.015739] CPU: Physical Processor ID: 0
[ 0.015740] CPU: Processor Core ID: 0
[ 0.015743] mce: CPU supports 6 MCE banks
[ 0.015751] CPU0: Thermal monitoring enabled (TM2)
[ 0.015755] using mwait in idle threads.
[ 0.015756] Performance Events: Core2 events, Intel PMU driver.
[ 0.015762] ... version: 2
[ 0.015764] ... bit width: 40
[ 0.015765] ... generic registers: 2
[ 0.015766] ... value mask: 000000ffffffffff
[ 0.015768] ... max period: 000000007fffffff
[ 0.015770] ... fixed-purpose events: 3
[ 0.015771] ... event mask: 0000000700000003
[ 0.021178] ACPI: Core revision 20090903
[ 0.030007] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.030012] ftrace: allocating 22543 entries in 89 pages
[ 0.038576] Setting APIC routing to flat
[ 0.038933] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.139351] CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
[ 0.140000] APIC calibration not consistent with PM-Timer: 149ms instead of 100ms
[ 0.140000] APIC delta adjusted to PM-Timer: 1666629 (2499931)
[ 0.140000] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.020000] Initializing CPU#1
[ 0.020000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.020000] CPU: L2 cache: 4096K
[ 0.020000] CPU 1/0x1 -> Node 0
[ 0.020000] CPU: Physical Processor ID: 0
[ 0.020000] CPU: Processor Core ID: 1
[ 0.020000] CPU1: Thermal monitoring enabled (TM2)
[ 0.290093] CPU1: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
[ 0.290100] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.300111] Booting processor 2 APIC 0x2 ip 0x6000
[ 0.020000] Initializing CPU#2
[ 0.020000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.020000] CPU: L2 cache: 4096K
[ 0.020000] CPU 2/0x2 -> Node 0
[ 0.020000] CPU: Physical Processor ID: 0
[ 0.020000] CPU: Processor Core ID: 2
[ 0.020000] CPU2: Thermal monitoring enabled (TM2)
[ 0.460073] CPU2: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
[ 0.460080] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.470075] Booting processor 3 APIC 0x3 ip 0x6000
[ 0.020000] Initializing CPU#3
[ 0.020000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.020000] CPU: L2 cache: 4096K
[ 0.020000] CPU 3/0x3 -> Node 0
[ 0.020000] CPU: Physical Processor ID: 0
[ 0.020000] CPU: Processor Core ID: 3
[ 0.020000] CPU3: Thermal monitoring enabled (TM2)
[ 0.630115] CPU3: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
[ 0.630121] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.640011] Brought up 4 CPUs
[ 0.640014] Total of 4 processors activated (19199.96 BogoMIPS).
[ 0.641590] CPU0 attaching sched-domain:
[ 0.641593] domain 0: span 0-1 level MC
[ 0.641596] groups: 0 1
[ 0.641599] domain 1: span 0-3 level CPU
[ 0.641601] groups: 0-1 (cpu_power = 2048) 2-3 (cpu_power = 2048)
[ 0.641608] CPU1 attaching sched-domain:
[ 0.641610] domain 0: span 0-1 level MC
[ 0.641612] groups: 1 0
[ 0.641615] domain 1: span 0-3 level CPU
[ 0.641617] groups: 0-1 (cpu_power = 2048) 2-3 (cpu_power = 2048)
[ 0.641622] CPU2 attaching sched-domain:
[ 0.641624] domain 0: span 2-3 level MC
[ 0.641626] groups: 2 3
[ 0.641629] domain 1: span 0-3 level CPU
[ 0.641631] groups: 2-3 (cpu_power = 2048) 0-1 (cpu_power = 2048)
[ 0.641636] CPU3 attaching sched-domain:
[ 0.641638] domain 0: span 2-3 level MC
[ 0.641640] groups: 3 2
[ 0.641643] domain 1: span 0-3 level CPU
[ 0.641644] groups: 2-3 (cpu_power = 2048) 0-1 (cpu_power = 2048)
[ 0.641761] devtmpfs: initialized
[ 0.641761] regulator: core version 0.5
[ 0.641761] Time: 17:14:56 Date: 11/06/10
[ 0.641761] NET: Registered protocol family 16
[ 0.641761] ACPI: bus type pci registered
[ 0.641761] Trying to unpack rootfs image as initramfs...
[ 0.641761] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.641761] PCI: Not using MMCONFIG.
[ 0.641761] PCI: Using configuration type 1 for base access
[ 0.641761] bio: create slab <bio-0> at 0
[ 0.641761] ACPI: EC: Look up EC in DSDT
[ 0.642526] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.650292] ACPI: Interpreter enabled
[ 0.650295] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.650315] ACPI: Using IOAPIC for interrupt routing
[ 0.650360] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.652189] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.655728] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.662869] ACPI: No dock devices found.
[ 0.663001] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.663098] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.663101] pci 0000:00:01.0: PME# disabled
[ 0.663183] pci 0000:00:1a.0: reg 20 io port: [0xb400-0xb41f]
[ 0.663261] pci 0000:00:1a.1: reg 20 io port: [0xb480-0xb49f]
[ 0.663341] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfe8fec00-0xfe8fefff]
[ 0.663396] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.663400] pci 0000:00:1a.7: PME# disabled
[ 0.663446] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe8f4000-0xfe8f7fff]
[ 0.663495] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.663499] pci 0000:00:1b.0: PME# disabled
[ 0.663576] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.663580] pci 0000:00:1c.0: PME# disabled
[ 0.663658] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.663662] pci 0000:00:1c.2: PME# disabled
[ 0.663731] pci 0000:00:1d.0: reg 20 io port: [0xb800-0xb81f]
[ 0.663810] pci 0000:00:1d.1: reg 20 io port: [0xb880-0xb89f]
[ 0.663886] pci 0000:00:1d.2: reg 20 io port: [0xbc00-0xbc1f]
[ 0.663962] pci 0000:00:1d.3: reg 20 io port: [0xc000-0xc01f]
[ 0.664039] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe8ff800-0xfe8ffbff]
[ 0.664094] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.664098] pci 0000:00:1d.7: PME# disabled
[ 0.664232] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.664236] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.664239] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
[ 0.664316] pci 0000:00:1f.2: reg 10 io port: [0xc880-0xc887]
[ 0.664323] pci 0000:00:1f.2: reg 14 io port: [0xc800-0xc803]
[ 0.664329] pci 0000:00:1f.2: reg 18 io port: [0xc480-0xc487]
[ 0.664335] pci 0000:00:1f.2: reg 1c io port: [0xc400-0xc403]
[ 0.664342] pci 0000:00:1f.2: reg 20 io port: [0xc080-0xc09f]
[ 0.664348] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfe8ff000-0xfe8ff7ff]
[ 0.664389] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.664393] pci 0000:00:1f.2: PME# disabled
[ 0.664429] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfe8ffc00-0xfe8ffcff]
[ 0.664445] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.664496] pci 0000:04:00.0: reg 10 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.664504] pci 0000:04:00.0: reg 18 64bit mmio: [0xfeaf0000-0xfeafffff]
[ 0.664509] pci 0000:04:00.0: reg 20 io port: [0xd000-0xd0ff]
[ 0.664517] pci 0000:04:00.0: reg 30 32bit mmio pref: [0xfeac0000-0xfeadffff]
[ 0.664534] pci 0000:04:00.0: supports D1 D2
[ 0.664581] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff]
[ 0.664584] pci 0000:00:01.0: bridge 32bit mmio: [0xfea00000-0xfeafffff]
[ 0.664588] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.664793] pci 0000:02:00.0: reg 10 io port: [0xe800-0xe8ff]
[ 0.664867] pci 0000:02:00.0: reg 18 64bit mmio: [0xfebff000-0xfebfffff]
[ 0.664917] pci 0000:02:00.0: reg 20 64bit mmio pref: [0xfdff0000-0xfdffffff]
[ 0.664943] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfebc0000-0xfebdffff]
[ 0.665095] pci 0000:02:00.0: supports D1 D2
[ 0.665096] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.665110] pci 0000:02:00.0: PME# disabled
[ 0.665234] pci 0000:00:1c.2: bridge io port: [0xe000-0xefff]
[ 0.665238] pci 0000:00:1c.2: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
[ 0.665244] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xfdf00000-0xfdffffff]
[ 0.665284] pci 0000:01:05.0: reg 10 32bit mmio: [0xfe9ff000-0xfe9fffff]
[ 0.665331] pci 0000:01:05.0: supports D1 D2
[ 0.665333] pci 0000:01:05.0: PME# supported from D0 D1 D2 D3hot
[ 0.665337] pci 0000:01:05.0: PME# disabled
[ 0.665374] pci 0000:00:1e.0: transparent bridge
[ 0.665381] pci 0000:00:1e.0: bridge 32bit mmio: [0xfe900000-0xfe9fffff]
[ 0.665407] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.665515] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.665602] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.665654] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 0.677399] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.677495] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.677589] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.677683] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.677776] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[ 0.677871] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.677965] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.678058] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.678162] vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks= none
[ 0.678166] vgaarb: loaded
[ 0.678262] SCSI subsystem initialized
[ 0.678271] libata version 3.00 loaded.
[ 0.678271] usbcore: registered new interface driver usbfs
[ 0.678271] usbcore: registered new interface driver hub
[ 0.678271] usbcore: registered new device driver usb
[ 0.678271] ACPI: WMI: Mapper loaded
[ 0.678271] PCI: Using ACPI for IRQ routing
[ 0.678271] NetLabel: Initializing
[ 0.678271] NetLabel: domain hash size = 128
[ 0.678271] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.678271] NetLabel: unlabeled traffic allowed by default
[ 0.678271] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.678271] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.700065] Switching to clocksource tsc
[ 0.702010] AppArmor: AppArmor Filesystem Enabled
[ 0.702028] pnp: PnP ACPI init
[ 0.702048] ACPI: bus type pnp registered
[ 0.704277] pnp: PnP ACPI: found 16 devices
[ 0.704279] ACPI: ACPI bus type pnp unregistered
[ 0.704291] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[ 0.704298] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[ 0.704300] system 00:06: ioport range 0x800-0x87f has been reserved
[ 0.704303] system 00:06: ioport range 0x480-0x4bf has been reserved
[ 0.704305] system 00:06: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.704308] system 00:06: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.704313] system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.704315] system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.704320] system 00:0b: ioport range 0xa00-0xadf has been reserved
[ 0.704325] system 00:0d: iomem range 0xffc00000-0xffefffff has been reserved
[ 0.704330] system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.704335] system 00:0f: iomem range 0x0-0x9ffff could not be reserved
[ 0.704337] system 00:0f: iomem range 0xc0000-0xcffff has been reserved
[ 0.704339] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
[ 0.704342] system 00:0f: iomem range 0x100000-0xbfffffff could not be reserved
[ 0.709078] pci 0000:00:01.0: PCI bridge, secondary bus 0000:04
[ 0.709081] pci 0000:00:01.0: IO window: 0xd000-0xdfff
[ 0.709084] pci 0000:00:01.0: MEM window: 0xfea00000-0xfeafffff
[ 0.709087] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.709091] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03
[ 0.709094] pci 0000:00:1c.0: IO window: 0x1000-0x1fff
[ 0.709100] pci 0000:00:1c.0: MEM window: 0xc0000000-0xc01fffff
[ 0.709104] pci 0000:00:1c.0: PREFETCH window: 0x000000c0200000-0x000000c03fffff
[ 0.709111] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:02
[ 0.709114] pci 0000:00:1c.2: IO window: 0xe000-0xefff
[ 0.709119] pci 0000:00:1c.2: MEM window: 0xfeb00000-0xfebfffff
[ 0.709124] pci 0000:00:1c.2: PREFETCH window: 0x000000fdf00000-0x000000fdffffff
[ 0.709131] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
[ 0.709132] pci 0000:00:1e.0: IO window: disabled
[ 0.709137] pci 0000:00:1e.0: MEM window: 0xfe900000-0xfe9fffff
[ 0.709141] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.709157] alloc irq_desc for 16 on node -1
[ 0.709159] alloc kstat_irqs on node -1
[ 0.709165] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.709169] pci 0000:00:01.0: setting latency timer to 64
[ 0.709177] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[ 0.709180] alloc irq_desc for 17 on node -1
[ 0.709181] alloc kstat_irqs on node -1
[ 0.709184] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.709189] pci 0000:00:1c.0: setting latency timer to 64
[ 0.709197] alloc irq_desc for 18 on node -1
[ 0.709199] alloc kstat_irqs on node -1
[ 0.709201] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.709206] pci 0000:00:1c.2: setting latency timer to 64
[ 0.709213] pci 0000:00:1e.0: setting latency timer to 64
[ 0.709217] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.709219] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.709221] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff]
[ 0.709223] pci_bus 0000:04: resource 1 mem: [0xfea00000-0xfeafffff]
[ 0.709225] pci_bus 0000:04: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.709228] pci_bus 0000:03: resource 0 io: [0x1000-0x1fff]
[ 0.709230] pci_bus 0000:03: resource 1 mem: [0xc0000000-0xc01fffff]
[ 0.709232] pci_bus 0000:03: resource 2 pref mem [0xc0200000-0xc03fffff]
[ 0.709234] pci_bus 0000:02: resource 0 io: [0xe000-0xefff]
[ 0.709236] pci_bus 0000:02: resource 1 mem: [0xfeb00000-0xfebfffff]
[ 0.709238] pci_bus 0000:02: resource 2 pref mem [0xfdf00000-0xfdffffff]
[ 0.709240] pci_bus 0000:01: resource 1 mem: [0xfe900000-0xfe9fffff]
[ 0.709242] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.709244] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.709278] NET: Registered protocol family 2
[ 0.709436] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.710799] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.718263] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.719261] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.719264] TCP reno registered
[ 0.719410] NET: Registered protocol family 1
[ 0.719554] pci 0000:04:00.0: Boot video device
[ 0.719907] Scanning for low memory corruption every 60 seconds
[ 0.720028] audit: initializing netlink socket (disabled)
[ 0.720039] type=2000 audit(1289063695.719:1): initialized
[ 0.728340] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.729634] VFS: Disk quotas dquot_6.5.2
[ 0.729701] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.730248] fuse init (API version 7.13)
[ 0.730328] msgmni has been set to 6020
[ 0.730613] alg: No test for stdrng (krng)
[ 0.730661] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.730664] io scheduler noop registered
[ 0.730665] io scheduler anticipatory registered
[ 0.730667] io scheduler deadline registered
[ 0.730698] io scheduler cfq registered (default)
[ 0.730830] alloc irq_desc for 24 on node -1
[ 0.730832] alloc kstat_irqs on node -1
[ 0.730840] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.730845] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.730943] alloc irq_desc for 25 on node -1
[ 0.730945] alloc kstat_irqs on node -1
[ 0.730952] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.730961] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.731090] alloc irq_desc for 26 on node -1
[ 0.731091] alloc kstat_irqs on node -1
[ 0.731098] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
[ 0.731107] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.731187] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.731259] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.731357] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.731360] ACPI: Power Button [PWRB]
[ 0.731398] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.731400] ACPI: Power Button [PWRF]
[ 0.732018] ACPI: SSDT 00000000bffb0270 00277 (v01 HPQOEM SLIC-CPC 00000011 INTL 20051117)
[ 0.732237] processor LNXCPU:00: registered as cooling_device0
[ 0.732595] ACPI: SSDT 00000000bffb0700 00277 (v01 HPQOEM SLIC-CPC 00000012 INTL 20051117)
[ 0.732786] processor LNXCPU:01: registered as cooling_device1
[ 0.733133] ACPI: SSDT 00000000bffb0b90 00277 (v01 HPQOEM SLIC-CPC 00000012 INTL 20051117)
[ 0.733329] processor LNXCPU:02: registered as cooling_device2
[ 0.733695] ACPI: SSDT 00000000bffb1020 00277 (v01 HPQOEM SLIC-CPC 00000012 INTL 20051117)
[ 0.733888] processor LNXCPU:03: registered as cooling_device3
[ 0.736946] Linux agpgart interface v0.103
[ 0.736974] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.738130] brd: module loaded
[ 0.738545] loop: module loaded
[ 0.738617] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.738968] Fixed MDIO Bus: probed
[ 0.738997] PPP generic driver version 2.4.2
[ 0.739022] tun: Universal TUN/TAP device driver, 1.6
[ 0.739024] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.739088] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.739109] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.739120] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.739123] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.739152] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.739180] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.743062] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.743080] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe8fec00
[ 0.769677] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.769826] usb usb1: configuration #1 chosen from 1 choice
[ 0.769860] hub 1-0:1.0: USB hub found
[ 0.769868] hub 1-0:1.0: 4 ports detected
[ 0.769930] alloc irq_desc for 23 on node -1
[ 0.769932] alloc kstat_irqs on node -1
[ 0.769938] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.769966] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.769969] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.770006] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.770033] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.773913] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.773935] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe8ff800
[ 0.799674] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.799792] usb usb2: configuration #1 chosen from 1 choice
[ 0.799821] hub 2-0:1.0: USB hub found
[ 0.799830] hub 2-0:1.0: 8 ports detected
[ 0.799900] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.799922] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.799966] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.799973] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.799982] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.800016] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.800055] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b400
[ 0.800134] usb usb3: configuration #1 chosen from 1 choice
[ 0.800158] hub 3-0:1.0: USB hub found
[ 0.800163] hub 3-0:1.0: 2 ports detected
[ 0.800200] alloc irq_desc for 21 on node -1
[ 0.800202] alloc kstat_irqs on node -1
[ 0.800207] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.800212] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.800215] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.800240] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.800269] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b480
[ 0.800348] usb usb4: configuration #1 chosen from 1 choice
[ 0.800368] hub 4-0:1.0: USB hub found
[ 0.800373] hub 4-0:1.0: 2 ports detected
[ 0.800418] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.800423] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.800426] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.800451] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.800473] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b800
[ 0.800552] usb usb5: configuration #1 chosen from 1 choice
[ 0.800572] hub 5-0:1.0: USB hub found
[ 0.800577] hub 5-0:1.0: 2 ports detected
[ 0.800614] alloc irq_desc for 19 on node -1
[ 0.800616] alloc kstat_irqs on node -1
[ 0.800619] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.800624] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.800627] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.800653] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.800682] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b880
[ 0.800762] usb usb6: configuration #1 chosen from 1 choice
[ 0.800782] hub 6-0:1.0: USB hub found
[ 0.800787] hub 6-0:1.0: 2 ports detected
[ 0.800826] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.800831] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.800834] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.800859] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.800884] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000bc00
[ 0.800971] usb usb7: configuration #1 chosen from 1 choice
[ 0.800996] hub 7-0:1.0: USB hub found
[ 0.801001] hub 7-0:1.0: 2 ports detected
[ 0.801037] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.801042] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.801045] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.801082] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[ 0.801106] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c000
[ 0.801183] usb usb8: configuration #1 chosen from 1 choice
[ 0.801207] hub 8-0:1.0: USB hub found
[ 0.801213] hub 8-0:1.0: 2 ports detected
[ 0.801300] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.803402] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.803407] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.803508] mice: PS/2 mouse device common for all mice
[ 0.803598] rtc_cmos 00:03: RTC can wake from S4
[ 0.803629] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.803656] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.803773] device-mapper: uevent: version 1.0.3
[ 0.803856] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised:
dm-devel@redhat.com
[ 0.803943] device-mapper: multipath: version 1.1.0 loaded
[ 0.803945] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.804140] cpuidle: using governor ladder
[ 0.804142] cpuidle: using governor menu
[ 0.804421] TCP cubic registered
[ 0.804540] NET: Registered protocol family 10
[ 0.804910] lo: Disabled Privacy Extensions
[ 0.805138] NET: Registered protocol family 17
[ 0.806206] PM: Resume from disk failed.
[ 0.806218] registered taskstats version 1
[ 0.806674] Magic number: 2:452:238
[ 0.806749] rtc_cmos 00:03: setting system clock to 2010-11-06 17:14:56 UTC (1289063696)
[ 0.806752] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.806753] EDD information not available.
[ 0.807983] Freeing initrd memory: 8145k freed
[ 0.811139] Freeing unused kernel memory: 876k freed
[ 0.811337] Write protecting the kernel read-only data: 7696k
[ 0.825290] udev: starting version 151
[ 0.831317] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.846391] ahci 0000:00:1f.2: version 3.0
[ 0.846411] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.846456] alloc irq_desc for 27 on node -1
[ 0.846458] alloc kstat_irqs on node -1
[ 0.846469] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
[ 0.846479] ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF
[ 0.846527] ahci: SSS flag set, parallel bus scan disabled
[ 0.846571] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
[ 0.846574] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ccc ems sxs
[ 0.846579] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.862032] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.862075] r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.862162] r8169 0000:02:00.0: setting latency timer to 64
[ 0.862308] alloc irq_desc for 28 on node -1
[ 0.862310] alloc kstat_irqs on node -1
[ 0.862346] r8169 0000:02:00.0: irq 28 for MSI/MSI-X
[ 0.862888] eth0: RTL8168c/8111c at 0xffffc90000650000, 00:22:15:9d:f6:62, XID 1c4000c0 IRQ 28
[ 0.873056] alloc irq_desc for 20 on node -1
[ 0.873059] alloc kstat_irqs on node -1
[ 0.873065] ohci1394 0000:01:05.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.932451] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[20] MMIO=[fe9ff000-fe9ff7ff] Max Packet=[2048] IR/IT contexts=[8/8]
[ 0.940473] scsi0 : ahci
[ 0.940627] scsi1 : ahci
[ 0.940704] scsi2 : ahci
[ 0.940788] scsi3 : ahci
[ 0.940863] scsi4 : ahci
[ 0.940943] scsi5 : ahci
[ 0.941112] ata1: SATA max UDMA/133 abar m2048@0xfe8ff000 port 0xfe8ff100 irq 27
[ 0.941115] ata2: SATA max UDMA/133 abar m2048@0xfe8ff000 port 0xfe8ff180 irq 27
[ 0.941118] ata3: SATA max UDMA/133 abar m2048@0xfe8ff000 port 0xfe8ff200 irq 27
[ 0.941121] ata4: SATA max UDMA/133 abar m2048@0xfe8ff000 port 0xfe8ff280 irq 27
[ 0.941123] ata5: SATA max UDMA/133 abar m2048@0xfe8ff000 port 0xfe8ff300 irq 27
[ 0.941126] ata6: SATA max UDMA/133 abar m2048@0xfe8ff000 port 0xfe8ff380 irq 27
[ 1.090048] usb 1-3: new high speed USB device using ehci_hcd and address 2
[ 1.260953] usb 1-3: configuration #1 chosen from 1 choice
[ 1.293793] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.294528] ata1.00: ATA-8: WDC WD3200AAJS-65B4A0, 01.03A01, max UDMA/133
[ 1.294532] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.295354] ata1.00: configured for UDMA/133
[ 1.313900] scsi 0:0:0:0: Direct-Access ATA WDC WD3200AAJS-6 01.0 PQ: 0 ANSI: 5
[ 1.314080] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.314111] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.314172] sd 0:0:0:0: [sda] Write Protect is off
[ 1.314174] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.314197] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.314314] sda: sda1 < sda5 sda6 sda7 > sda2
[ 1.345092] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.390024] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 1.675765] usb 2-1: configuration #1 chosen from 1 choice
[ 1.790079] usb 2-5: new high speed USB device using ehci_hcd and address 3
[ 2.060040] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.061167] ata2.00: ATAPI: Optiarc DVD RW AD-7201S5, 1H0E, max UDMA/100
[ 2.062652] ata2.00: configured for UDMA/100
[ 2.081587] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7201S5 1H0E PQ: 0 ANSI: 5
[ 2.086260] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.086265] Uniform CD-ROM driver Revision: 3.20
[ 2.086398] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.086488] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.250147] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c000175445b]
[ 2.433788] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.485091] usb 2-5: configuration #1 chosen from 1 choice
[ 2.490860] Initializing USB Mass Storage driver...
[ 2.491001] scsi6 : SCSI emulation for USB Mass Storage devices
[ 2.491081] usb-storage: device found at 3
[ 2.491083] usb-storage: waiting for device to settle before scanning
[ 2.491096] usbcore: registered new interface driver usb-storage
[ 2.491099] USB Mass Storage support registered.
[ 2.800029] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.173778] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.543777] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.006736] kjournald starting. Commit interval 5 seconds
[ 4.006752] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.490414] usb-storage: device scan complete
[ 7.496772] scsi 6:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
[ 7.503012] scsi 6:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
[ 7.509262] scsi 6:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
[ 7.515515] scsi 6:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS
[ 7.516081] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 7.516190] sd 6:0:0:1: Attached scsi generic sg3 type 0
[ 7.516304] sd 6:0:0:2: Attached scsi generic sg4 type 0
[ 7.516433] sd 6:0:0:3: Attached scsi generic sg5 type 0
[ 7.519874] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 7.520622] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[ 7.521367] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[ 7.522124] sd 6:0:0:3: [sde] Attached SCSI removable disk
[ 9.883514] udev: starting version 151
[ 9.960750] Adding 3148668k swap on /dev/sda5. Priority:-1 extents:1 across:3148668k
[ 10.033517] type=1505 audit(1289063705.717:2): operation="profile_load" pid=593 name="/sbin/dhclient3"
[ 10.034167] type=1505 audit(1289063705.727:3): operation="profile_load" pid=593 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 10.034474] type=1505 audit(1289063705.727:4): operation="profile_load" pid=593 name="/usr/lib/connman/scripts/dhclient-script"
[ 10.140975] [drm] Initialized drm 1.1.0 20060810
[ 10.202331] lp: driver loaded but no devices found
[ 10.213194] cfg80211: Calling CRDA to update world regulatory domain
[ 10.276682] cfg80211: World regulatory domain updated:
[ 10.276684] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 10.276687] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.276689] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.276691] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.276694] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.276696] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.313187] [drm] radeon defaulting to kernel modesetting.
[ 10.313189] [drm] radeon kernel modesetting enabled.
[ 10.313235] radeon 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 10.313240] radeon 0000:04:00.0: setting latency timer to 64
[ 10.315694] [drm] radeon: Initializing kernel modesetting.
[ 10.315891] [drm] register mmio base: 0xFEAF0000
[ 10.315893] [drm] register mmio size: 65536
[ 10.316017] ATOM BIOS: 113
[ 10.316029] [drm] Clocks initialized !
[ 10.318547] [drm] Detected VRAM RAM=256M, BAR=256M
[ 10.318556] [drm] RAM width 64bits DDR
[ 10.318668] [TTM] Zone kernel: Available graphics memory: 1545806 kiB.
[ 10.318691] [drm] radeon: 256M of VRAM memory ready
[ 10.318693] [drm] radeon: 512M of GTT memory ready.
[ 10.318735] alloc irq_desc for 29 on node -1
[ 10.318737] alloc kstat_irqs on node -1
[ 10.318746] radeon 0000:04:00.0: irq 29 for MSI/MSI-X
[ 10.318751] radeon 0000:04:00.0: radeon: using MSI.
[ 10.318775] [drm] radeon: irq initialized.
[ 10.318778] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 10.319169] [drm] Loading RV620 Microcode
[ 10.319249] platform radeon_cp.0: firmware: requesting radeon/RV620_pfp.bin
[ 10.412455] platform radeon_cp.0: firmware: requesting radeon/RV620_me.bin
[ 10.414530] platform radeon_cp.0: firmware: requesting radeon/R600_rlc.bin
[ 10.448806] [drm] ring test succeeded in 1 usecs
[ 10.448905] [drm] radeon: ib pool ready.
[ 10.448977] [drm] ib test succeeded in 0 usecs
[ 10.448979] [drm] Enabling audio support
[ 10.449190] [drm] Radeon Display Connectors
[ 10.449192] [drm] Connector 0:
[ 10.449193] [drm] VGA
[ 10.449195] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 10.449197] [drm] Encoders:
[ 10.449198] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 10.449200] [drm] Connector 1:
[ 10.449201] [drm] DVI-I
[ 10.449202] [drm] HPD1
[ 10.449204] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 10.449205] [drm] Encoders:
[ 10.449206] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 10.449208] [drm] DFP1: INTERNAL_KLDSCP_LVTMA
[ 10.562938] [drm] fb mappable at 0xD0141000
[ 10.562940] [drm] vram apper at 0xD0000000
[ 10.562942] [drm] size 7257600
[ 10.562943] [drm] fb depth is 24
[ 10.562944] [drm] pitch is 6912
[ 10.563003] fb0: radeondrmfb frame buffer device
[ 10.563005] registered panic notifier
[ 10.563009] [drm] Initialized radeon 2.0.0 20080528 for 0000:04:00.0 on minor 0
[ 10.609316] phy0 -> rt2500usb_init_eeprom: Error - Invalid RT chipset detected.
[ 10.609352] phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device.
[ 10.609422] usbcore: registered new interface driver rt2500usb
[ 10.749717] vga16fb: initializing
[ 10.749720] vga16fb: mapped to 0xffff8800000a0000
[ 10.749723] vga16fb: not registering due to another framebuffer present
[ 10.908093] Console: switching to colour frame buffer device 210x65
[ 10.961169] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[ 11.177293] alloc irq_desc for 22 on node -1
[ 11.177296] alloc kstat_irqs on node -1
[ 11.177304] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 11.177344] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 11.223606] phy1: Selected rate control algorithm 'minstrel'
[ 11.224239] Registered led device: rt73usb-phy1::radio
[ 11.224257] Registered led device: rt73usb-phy1::assoc
[ 11.224273] Registered led device: rt73usb-phy1::quality
[ 11.224814] usbcore: registered new interface driver rt73usb
[ 11.343142] hda_codec: ALC1200: BIOS auto-probing.
[ 11.344812] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[ 11.447699] EXT3 FS on sda6, internal journal
[ 11.779535] EXT4-fs (sda7): mounted filesystem with ordered data mode
[ 12.062589] EXT4-fs (sda2): mounted filesystem with ordered data mode
[ 12.142846] type=1505 audit(1289063707.835:5): operation="profile_replace" pid=914 name="/sbin/dhclient3"
[ 12.143430] type=1505 audit(1289063707.835:6): operation="profile_replace" pid=914 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 12.143691] r8169: eth0: link down
[ 12.143745] type=1505 audit(1289063707.835:7): operation="profile_replace" pid=914 name="/usr/lib/connman/scripts/dhclient-script"
[ 12.144237] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.145650] rt73usb 2-1:1.0: firmware: requesting rt73.bin
[ 12.146555] type=1505 audit(1289063707.835:8): operation="profile_load" pid=918 name="/usr/lib/cups/backend/cups-pdf"
[ 12.147270] type=1505 audit(1289063707.835:9): operation="profile_load" pid=918 name="/usr/sbin/cupsd"
[ 12.149233] type=1505 audit(1289063707.835:10): operation="profile_load" pid=922 name="/usr/sbin/mysqld-akonadi"
[ 12.150707] type=1505 audit(1289063707.835:11): operation="profile_load" pid=923 name="/usr/sbin/tcpdump"
[ 12.249333] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 12.435183] ppdev: user-space parallel port driver
[ 179.079857] wlan0: deauthenticating from 00:19:3e:40:b1:af by local choice (reason=3)
[ 179.083575] wlan0: direct probe to AP 00:19:3e:40:b1:af (try 1)
[ 179.085588] wlan0: direct probe responded
[ 179.085590] wlan0: authenticate with AP 00:19:3e:40:b1:af (try 1)
[ 179.087326] wlan0: authenticated
[ 179.087349] wlan0: associate with AP 00:19:3e:40:b1:af (try 1)
[ 179.089831] wlan0: RX AssocResp from 00:19:3e:40:b1:af (capab=0x411 status=0 aid=2)
[ 179.089834] wlan0: associated
[ 179.103532] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 189.181280] wlan0: no IPv6 routers present
[ 279.715302] lo: Disabled Privacy Extensions
[ 2443.540023] No probe response from AP 00:19:3e:40:b1:af after 500ms, disconnecting.
[ 2445.113952] wlan0: direct probe to AP 00:19:3e:40:b1:af (try 1)
[ 2445.115964] wlan0: direct probe responded
[ 2445.115967] wlan0: authenticate with AP 00:19:3e:40:b1:af (try 1)
[ 2445.117700] wlan0: authenticated
[ 2445.117723] wlan0: associate with AP 00:19:3e:40:b1:af (try 1)
[ 2445.120080] wlan0: RX AssocResp from 00:19:3e:40:b1:af (capab=0x411 status=0 aid=2)
[ 2445.120085] wlan0: associated
[ 2445.160491] usb 1-3: USB disconnect, address 2
[ 2449.952526] usb 1-3: new high speed USB device using ehci_hcd and address 3
[ 2450.123508] usb 1-3: configuration #1 chosen from 1 choice
[ 2528.540021] No probe response from AP 00:19:3e:40:b1:af after 500ms, disconnecting.
[ 2542.544663] wlan0: direct probe to AP 00:19:3e:40:b1:af (try 1)
[ 2542.740025] wlan0: direct probe to AP 00:19:3e:40:b1:af (try 2)
[ 2542.940028] wlan0: direct probe to AP 00:19:3e:40:b1:af (try 3)
[ 2542.946897] wlan0: direct probe responded
[ 2542.946901] wlan0: authenticate with AP 00:19:3e:40:b1:af (try 1)
[ 2543.140026] wlan0: authenticate with AP 00:19:3e:40:b1:af (try 2)
[ 2543.145880] wlan0: authenticated
[ 2543.145901] wlan0: associate with AP 00:19:3e:40:b1:af (try 1)
[ 2543.196628] wlan0: RX AssocResp from 00:19:3e:40:b1:af (capab=0x411 status=0 aid=2)
[ 2543.196631] wlan0: associated
[ 2544.611826] wlan0: deauthenticating from 00:19:3e:40:b1:af by local choice (reason=3)
[ 2544.810301] wlan0: deauthenticating from 00:19:3e:40:b1:af by local choice (reason=3)
[ 2545.011023] wlan0: direct probe to AP 00:19:3e:40:b1:af (try 1)
[ 2545.200049] wlan0: direct probe to AP 00:19:3e:40:b1:af (try 2)
[ 2545.400018] wlan0: direct probe to AP 00:19:3e:40:b1:af (try 3)
[ 2545.600020] wlan0: direct probe to AP 00:19:3e:40:b1:af timed out
[ 2555.979916] wlan0: direct probe to AP 00:19:3e:40:b1:af (try 1)
[ 2556.181279] wlan0: direct probe to AP 00:19:3e:40:b1:af (try 2)
[ 2556.185536] wlan0: direct probe responded
[ 2556.185540] wlan0: authenticate with AP 00:19:3e:40:b1:af (try 1)
[ 2556.188150] wlan0: authenticated
[ 2556.188172] wlan0: associate with AP 00:19:3e:40:b1:af (try 1)
[ 2556.206404] wlan0: RX AssocResp from 00:19:3e:40:b1:af (capab=0x411 status=0 aid=2)
[ 2556.206408] wlan0: associated
[ 2603.540035] No probe response from AP 00:19:3e:40:b1:af after 500ms, disconnecting.
[ 2605.174181] wlan0: direct probe to AP 00:19:3e:40:b1:af (try 1)
[ 2605.374045] wlan0: direct probe to AP 00:19:3e:40:b1:af (try 2)
[ 2605.570052] wlan0: direct probe to AP 00:19:3e:40:b1:af (try 3)
[ 2605.770026] wlan0: direct probe to AP 00:19:3e:40:b1:af timed out
[ 2616.491803] wlan0: direct probe to AP 00:19:3e:40:b1:af (try 1)
[ 2616.493815] wlan0: direct probe responded
[ 2616.493819] wlan0: authenticate with AP 00:19:3e:40:b1:af (try 1)
[ 2616.495548] wlan0: authenticated
[ 2616.495570] wlan0: associate with AP 00:19:3e:40:b1:af (try 1)
[ 2616.497928] wlan0: RX AssocResp from 00:19:3e:40:b1:af (capab=0x411 status=0 aid=2)
[ 2616.497930] wlan0: associated
[ 6331.379639] lo: Disabled Privacy Extensions
Bookmarks