Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 37

Thread: What is best for encodeing Videos?

  1. #21
    Join Date
    Sep 2008
    Beans
    200

    Re: What is best for encodeing Videos?

    On the audio tab, there is a 'Track' option and a 'Codec' option. Before you can set the 'Codec' to DTS, you must select the DTS source 'Track'.

  2. #22
    Join Date
    Jun 2008
    Beans
    202
    Distro
    Ubuntu 9.10 Karmic Koala

    Re: What is best for encodeing Videos?

    Hi JohnAStebbins,
    Thanks...
    But, track shown is only "Unknown (AC3) (5.1ch)". nothing else.
    I am using Handbrake svn3506 (i686) version. Is there any other version I need to use!!!!

  3. #23
    Join Date
    Sep 2008
    Beans
    200

    Re: What is best for encodeing Videos?

    Well, it sounds like handbrake isn't finding a second DTS track. You'll have to show me the activity log of the scan for me to tell for sure.

  4. #24
    Join Date
    Jun 2008
    Beans
    202
    Distro
    Ubuntu 9.10 Karmic Koala

    Re: What is best for encodeing Videos?

    Hi JohnAStebbins,
    Kindly let me know where can I find the log file.

  5. #25
    Join Date
    Jun 2008
    Beans
    202
    Distro
    Ubuntu 9.10 Karmic Koala

    Re: What is best for encodeing Videos?

    Hi,
    I got the below log from view -> activity window.
    libdvdread: Encrypted DVD support unavailable.
    [19:53:17] hb_scan: path=/dev/sr0, title_index=0
    [19:53:17] scan: trying to open with libdvdread
    [19:53:17] dvd: Region mask 0xff
    [19:53:17] dvd: Warning, DVD device has no region set
    libdvdnav: Using dvdnav version 4.1.3
    libdvdread: Encrypted DVD support unavailable.
    libdvdnavVDOpenFileUDF:UDFFindFile /VIDEO_TS/VIDEO_TS.IFO failed
    libdvdnavVDOpenFileUDF:UDFFindFile /VIDEO_TS/VIDEO_TS.BUP failed
    libdvdread: Can't open file VIDEO_TS.IFO.
    libdvdnav: vm: failed to read VIDEO_TS.IFO
    [19:53:17] dvd: not a dvd - trying as a stream/file instead
    [19:53:17] file is MPEG Program Stream
    libdvdread: Encrypted DVD support unavailable.
    [19:53:35] add_audio_to_title: added AC3 audio stream 0x89bd
    [19:53:35] add_audio_to_title: added AC3 audio stream 0x80bd
    [19:53:36] scan: decoding previews for title 1
    [19:53:37] scan: audio 0x80bd: AC-3, rate=48000Hz, bitrate=448000 Unknown (AC3) (5.1 ch)
    [19:53:52] scan: 10 previews, 720x480, 23.976 fps, autocrop = 58/56/2/0, aspect 1.78:1, PAR 32:27
    [19:53:52] scan: removing audio 0x89bd because no bitrate found
    [19:53:52] scan: title (0) job->width:720, job->height:304
    [19:53:52] libhb: scan thread found 1 valid title(s)
    libdvdread: Encrypted DVD support unavailable.


    Kindly let me know why I could not able to select DTS audio (second) track.

  6. #26
    Join Date
    Dec 2006
    Beans
    6,935

    Re: What is best for encodeing Videos?

    Hi prabath,

    Quote Originally Posted by prabath_fun View Post
    Code:
    libdvdread: Encrypted DVD support unavailable.
    Loks like you are missing libdvdcss, have a look here:

    https://help.ubuntu.com/community/RestrictedFormats

    This will guide you through its installation...

    Andrew
    You think that's air you're breathing now?

  7. #27
    Join Date
    Jun 2008
    Beans
    202
    Distro
    Ubuntu 9.10 Karmic Koala

    Re: What is best for encodeing Videos?

    Hi andrew,
    Thanks.. I did as mentioned in the link...
    But, still, no improvement... Handbrake is not showing second audio track. Still, it is showing AC3 track only.... Below is the log after restricted packages installed
    [18:59:37] gtkgui: HandBrake svn3506 (2010090101) - Linux i686 - http://handbrake.fr
    [18:59:37] hb_init: checking cpu count
    [18:59:38] hb_init: starting libhb thread
    [18:59:38] hb_init: checking cpu count
    [18:59:38] hb_init: starting libhb thread
    libdvdread: Encrypted DVD support unavailable.
    libdvdread: Encrypted DVD support unavailable.
    [18:59:42] hb_scan: path=/dev/sr0, title_index=0
    [18:59:42] scan: trying to open with libdvdread
    [18:59:42] dvd: Region mask 0xff
    [18:59:42] dvd: Warning, DVD device has no region set
    libdvdnav: Using dvdnav version 4.1.3
    libdvdread: Encrypted DVD support unavailable.
    libdvdnavVDOpenFileUDF:UDFFindFile /VIDEO_TS/VIDEO_TS.IFO failed
    libdvdnavVDOpenFileUDF:UDFFindFile /VIDEO_TS/VIDEO_TS.BUP failed
    libdvdread: Can't open file VIDEO_TS.IFO.
    libdvdnav: vm: failed to read VIDEO_TS.IFO
    [18:59:42] dvd: not a dvd - trying as a stream/file instead
    [18:59:42] file is MPEG Program Stream
    [18:59:53] add_audio_to_title: added AC3 audio stream 0x89bd
    [18:59:53] add_audio_to_title: added AC3 audio stream 0x80bd
    [18:59:54] scan: decoding previews for title 1
    [18:59:54] scan: audio 0x80bd: AC-3, rate=48000Hz, bitrate=448000 Unknown (AC3) (5.1 ch)
    [19:00:09] scan: 10 previews, 720x480, 23.976 fps, autocrop = 58/56/2/0, aspect 1.78:1, PAR 32:27
    [19:00:09] scan: removing audio 0x89bd because no bitrate found
    [19:00:09] scan: title (0) job->width:720, job->height:304
    [19:00:09] libhb: scan thread found 1 valid title(s)
    libdvdread: Encrypted DVD support unavailable
    Last edited by prabath_fun; September 14th, 2010 at 02:34 PM.

  8. #28
    Join Date
    Sep 2008
    Beans
    200

    Re: What is best for encodeing Videos?

    There's a lot of problems here.
    Code:
    libdvdread: Encrypted DVD support unavailable.
    libdvdnavVDOpenFileUDF:UDFFindFile /VIDEO_TS/VIDEO_TS.IFO failed
    libdvdnavVDOpenFileUDF:UDFFindFile /VIDEO_TS/VIDEO_TS.BUP failed
    libdvdread: Can't open file VIDEO_TS.IFO.
    libdvdnav: vm: failed to read VIDEO_TS.IFO
    [18:59:42] dvd: not a dvd - trying as a stream/file instead
    [18:59:42] file is MPEG Program Stream
    You still don't have libdvdcss installed properly. But there are other problems to solve before this would be an issue. It's not even recognizing the disc as a DVD. Note the errors in trying to open VIDEO_TS/VIDEO_TS.IFO. Can you mount the disc and show us a directory listing of what is present there? It finds something that looks like a program stream by reading the raw data it sees on the disc. But this is a definite path to failure.

  9. #29
    Join Date
    Jun 2008
    Beans
    202
    Distro
    Ubuntu 9.10 Karmic Koala

    Re: What is best for encodeing Videos?

    Hi JohnAStebbins,
    I have verified libdvdread and libdvdnav installation in synaptic package manager. It shows that, it is installed with green color. But, I am not seeing libdvdcss... I just checked in ubuntu packages website for same, I am not getting libdvdcss. Is it collection of above said to packages???
    I am not under standing "show us a directory listing of what is present there?". Is it do you mean directory structure / tree!! Or some sort of log file. If log file, Kindly let me know where can I find.

    If it is tree, after mounting, it will be /media/Madrasa..<Dvd name>
    inside this I will be having one folder called video_ts and inside this folder will be having .vob files and supported files...

    Further, just I gave a try with windows version of Handbrake in XP, which runs inside virtualbox. There I found no problem. I can able to select second audio track (DTS track) or first audio track (AC3 track) with mkv setting.

  10. #30
    Join Date
    Sep 2005
    Beans
    1,605
    Distro
    Xubuntu 14.04 Trusty Tahr

    Re: What is best for encodeing Videos?

    Quote Originally Posted by prabath_fun View Post
    Hi JohnAStebbins,
    I have verified libdvdread and libdvdnav installation in synaptic package manager. It shows that, it is installed with green color. But, I am not seeing libdvdcss... I just checked in ubuntu packages website for same, I am not getting libdvdcss. Is it collection of above said to packages???
    I am not under standing "show us a directory listing of what is present there?". Is it do you mean directory structure / tree!! Or some sort of log file. If log file, Kindly let me know where can I find.

    If it is tree, after mounting, it will be /media/Madrasa..<Dvd name>
    inside this I will be having one folder called video_ts and inside this folder will be having .vob files and supported files...

    Further, just I gave a try with windows version of Handbrake in XP, which runs inside virtualbox. There I found no problem. I can able to select second audio track (DTS track) or first audio track (AC3 track) with mkv setting.
    To install libdvdcss do this.

    Click Applications -> Accessories -> Terminal
    And type in the following commands:
    Code:
    sudo apt-get install libdvdread4
    sudo /usr/share/doc/libdvdread4/install-css.sh
    That will install libdvdcss - [ Reference: https://help.ubuntu.com/community/Re...ts/PlayingDVDs ]

Page 3 of 4 FirstFirst 1234 LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •