Thank you very much, williamts99!
Three years after it was written, it is still an object lesson in How To write a How To.
My scanner works, and it was easier than *******.
Phil
Thank you very much, williamts99!
Three years after it was written, it is still an object lesson in How To write a How To.
My scanner works, and it was easier than *******.
Phil
Tested with Maverick 10.10: Works well, thanks a lot!
Tested on 10.04 Lucid, works, thank you very much...
(even though written 3 years ago thanks again)
Last edited by mmck; November 3rd, 2010 at 07:07 PM.
Hi,
I'm on Maverik 10.10 too but does'nt work: with xsane I've this error:
"Non è possibile aprire il dispositivo 'gt68xx:libusb:002:003': l'argomento non è valido"
That in english is something like:
"Impossibile open the device 'gt68xx:libusb:002:003': invalid argument"
And, with lsusb, i see that 002:003 is the scanner:
federico@federico-F5SL:~$ lsusb
Bus 003 Device 003: ID 0b05:1712 ASUSTek Computer, Inc. BT-183 Bluetooth 2.0+EDR adapter
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 05d8:4002 Ultima Electronics Corp. Artec Ultima 2000 (GT6801 based)/Lifetec LT9385/ScanMagic 1200 UB Plus Scanner
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 007: ID 046d:c505 Logitech, Inc. Cordless Mouse+Keyboard Receiver
Bus 001 Device 006: ID 0bda:0116 Realtek Semiconductor Corp. Mass Storage Device
Bus 001 Device 004: ID 04f2:b012 Chicony Electronics Co., Ltd 1.3 MPixel UVC Webcam
Bus 001 Device 003: ID 0409:005a NEC Corp. HighSpeed Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Any idea?
Missing permission:
federico@federico-F5SL:/usr/share/sane/gt68xx$ sudo chmod a+r *
Now works
Last edited by bach42t; December 3rd, 2010 at 12:41 PM. Reason: SOLVED
Thanks
Nice to see it's still working!
WOOOOW!! Thanks for this! I finally got my scanner to work! You know that they're hard to get to work with vista? WOW. with linux, I only needed 5 minutes to make it work! Thank you very much for this!
EDIT: Can someone help me? The scanner is detected and it works but, the output is really terrible. The problem is the the image(output) is really blurry. I tried different DPI's from 75-2400 and the blurry-ness is still there. Please help!
Last edited by frozonecom; May 27th, 2011 at 05:55 AM.
nice, thanks...
Hi every1,
have Mustek BearPaw 1200TA that is detected by "SimpleScan" bu after clicking scan it shouts: " unable to connect to scanner". The scanner is powered on and connected by USB cable. The lsusb gives:
Bus 002 Device 003: ID 055f:021e Mustek Systems, Inc. BearPaw 1200 TA/CS
so what is wrong, please help
Hi williamts99,
Tx a lot. After 5,5 years this how-to is still working great. Took me 2 minutes to find your post and get my Mustek 1200 UB Plus working
Greetz,
J@n
Main desktop: Mint 12-AMD Phenom II X4 975-16GB- 60 GB OCZ Vertex 2 SSD + 2 TB + 1,5 TB (DIY)
Storage: Synology CS-406-4x500 GB, DS-211-2x2TB
Ubuntu user 33387
Bookmarks