I have a i.MX51 (arm) based system. Sharp PC-Z1 and I am
trying to get a USB Dongle WIFI working.
(The internal one died)
The usb stick is a RT2870 device and the system does have
/lib/firmware/rt2870.bin
It also has /usr/src/linux-headers-2.6.28-15-araneo/drivers/staging/rt2870
Makefile and Kconfig
but that is all. no rt2870sta.ko etc
Is it possible I have enough on the system to complete the generation of the needed file to enable this device?
It's Ubuntu 9.04
tom
---
Well it turns out the syste, had gcc/ld and full kernel headers
I followed directions that came with the driver source from the vendor (rtlink)
and it builds fine but the driver does to activate when I plug the device in.
--
The Driver did not have my USB ID in it; found the table in the source and now the device is seen (in my case a macro USB_DEVICE)
Now to get the network manager to see it...
---
My device US was 148f:3070 and I found a 3070 driver on the RAlink site.
I also switched to WICD
Adv Reply
Bookmarks