Please help me out with this if you can. I'm just a noob and I can't get this to work.
Cisco Linksys USB300M USB Ethernet Adapter
under Ubuntu 10.04
Bus 001 Device 003: ID 0b95:7720 ASIX Electronincs Corp. AX88772
I bought this because some reviews at newegg,
said adapter was pretty much plug and play under Ubuntu. But it won't do a thing for any of my computers.
A search on Google: "AX88772 linux driver" gives a download link to a driver on the ASIX site.
On the site, just above the download links for all the drivers it says:
"All these AX88772A drivers are qualified with ASIX AX88772A demo board. If these drivers could not work with your AX88772A device, please contact your AX88772A device manufacturer to get a correct driver."
Which says to me that even after you've done all the work of building and installing this driver, it still might not work.
However the README file that comes with it requires that one rebuild the driver from scratch using the kernel source code. I've never done anything even like that. Here's part of the README file.
<- Begin README file
Prepare to build the AX88772/AX88772A/AX88178 driver, you need the Linux kernel sources
installed on the build machine, and make sure that the version of the running kernel
must match the installed kernel sources.
If you don't have the kernel sources, you can get it from www.kernel.org or contact to
your Linux distributor. If you don't know how to do, please refer to KERNEL-HOWTO.
Note1: Please make sure the kernel is built with one of the "Support for Host-side,
EHCI, OHCI, or UHCI" option support.
Note2: Please make sure the kernel is built with "Multi-purpose USB Networking Framework"
Note3: Check the necessary header file "usbnet.h" for building this driver. Without
this file, the driver compilation will fail and encounter hundreds of errors
all throuhout the souces. This file was located in different directory
according to your kernel version:
1. Linux kernel versions from 2.6.14 to 2.6.21
2. Linux kernel versions from 2.6.22 to 2.6.24
3. Linux kernel versions from 2.6.25 and later
1. Extract the compressed driver source file to your template directory by the following command:
[root@localhost home]# tar -xf AX88772_772A_178_LINUX2.6.25_REV106_20080901.tar.b z2
2. Now, the AX88772_772A_178_LINUX2.6.25_REV106_20080901/ driver directory should be extracted
under current directory. Go to the driver directory, and executing the following command to
compiler the AX88772/AX88772A/AX88178 driver.
[root@localhost AX88772_772A_178_LINUX2.6.25_REV106_20080901]# make
3. If the compilation is well, the asix.ko will be created under the current directory.
4. If you want to use modprobe command to mount the AX88772/AX88772A/AX88178 driver, executing
the following command to install the driver into your Linux.
[root@localhost AX88772/AX88772A/AX88178]# make install
End README file ->
The people who wrote the reviews on newegg seemed to have no problems getting this adapter to work under Ubuntu. I really don't want to go through this build process. It sound like a wild goose chase for someone with as little experience as me. I wonder if I'm doing something wrong to get this thing working an easy way. Can anyone see a simple solution to this problem. Please help.