Page 8 of 8 FirstFirst ... 678
Results 71 to 80 of 80

Thread: How To : Mobile Broadband Connections [ Ubuntu 11.04 : 10.10 : 10.04 : 9.10]

  1. #71
    Join Date
    Jun 2006
    Location
    UK
    Beans
    Hidden!
    Distro
    Ubuntu 15.04 Vivid Vervet

    Re: How To : Mobile Broadband Connections [ Ubuntu 11.04 : 10.10 : 10.04 : 9.10]

    Quote Originally Posted by fentan4562 View Post
    I must be stupid as i dont get how to install my e353 dongle on 11.04 at all could do with SIMPLE instructions
    The simplest instruction I can suggest is to upgrade to, or do a fresh install of Ubuntu 11.10. Or wait a couple of weeks and install 12.04. The Huawei E353 "just works" in both 11.10 and 12.04. All you do is to plug the dongle in, wait a couple of minutes and then click on the network manager icon near the top right. You'll see a mobile broadband choice in the drop-down menu. Click on this, follow the wizard and you'll soon be connected.

    You do have to wait a couple of minutes - at least - for the device to be detected and for the network manager drop-down menu to show you the mobile broadband choice.
    Ubuntu 15.04 Desktop Guide - Ubuntu 14.04 Desktop Guide - Forum Guide to BBCode - IRC #ubuntuforums

    Member: Not Canonical Team

    Please do not PM me about your forum account unless you have been asked to. The correct place to contact an admin about your account is here.

  2. #72
    Join Date
    Oct 2009
    Location
    A world without windows
    Beans
    Hidden!

    Re: How To : Mobile Broadband Connections [ Ubuntu 11.04 : 10.10 : 10.04 : 9.10]

    Quote Originally Posted by coffeecat View Post
    The simplest instruction I can suggest is to upgrade to, or do a fresh install of Ubuntu 11.10. Or wait a couple of weeks and install 12.04. The Huawei E353 "just works" in both 11.10 and 12.04. All you do is to plug the dongle in, wait a couple of minutes and then click on the network manager icon near the top right. You'll see a mobile broadband choice in the drop-down menu. Click on this, follow the wizard and you'll soon be connected.

    You do have to wait a couple of minutes - at least - for the device to be detected and for the network manager drop-down menu to show you the mobile broadband choice.
    Thanks for the input,

    Can post details of this device , using the command "usb-devices"

    Then can see if the Device has Configured in the manor to which it operates. and the drivers associated.

    Can do both for 11.10 and possible 12.04 only then will be convinced of certain aspects of this device and others in this family of Huawei Next generation

    have tested this device on versions of Ubuntu as listed in the How To , depending on kernel and version of usb_modeswitch it can have different configurations.

    Thanks in advance

    alexfish
    Two tin cans are better than an iphone

    http://www.ehow.co.uk/how_2067160_ma...hone.html?cr=1

  3. #73
    Join Date
    Jun 2006
    Location
    UK
    Beans
    Hidden!
    Distro
    Ubuntu 15.04 Vivid Vervet

    Re: How To : Mobile Broadband Connections [ Ubuntu 11.04 : 10.10 : 10.04 : 9.10]

    Quote Originally Posted by alexfish View Post
    Can post details of this device , using the command "usb-devices"
    @alexfish, sorry to interfere in your thread, but I just happened across fentan4562's post yesterday minutes after posting in another thread about this Huawei device. Anyway, the relevant output of usb-devices in Oneiric/11.10:

    Code:
    T:  Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  3 Spd=480 MxCh= 0
    D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
    P:  Vendor=12d1 ProdID=1506 Rev=00.00
    S:  Manufacturer=Huawei Technologies
    S:  Product=HUAWEI Mobile
    C:  #Ifs= 7 Cfg#= 1 Atr=c0 MxPwr=500mA
    I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=option
    I:  If#= 1 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=01 Prot=09 Driver=option
    I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=08 Driver=option
    I:  If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=03 Driver=option
    I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=02 Driver=option
    I:  If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
    I:  If#= 6 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
    I'll boot up 12.04 later and edit this post with the output from Precise.

    EDIT: Equivalent part of output from 12.04 on different machine:

    Code:
    T:  Bus=02 Lev=02 Prnt=02 Port=04 Cnt=01 Dev#=  4 Spd=480 MxCh= 0
    D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
    P:  Vendor=12d1 ProdID=1506 Rev=00.00
    S:  Manufacturer=Huawei Technologies
    S:  Product=HUAWEI Mobile
    C:  #Ifs= 7 Cfg#= 1 Atr=c0 MxPwr=500mA
    I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=option
    I:  If#= 1 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=01 Prot=09 Driver=(none)
    I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=08 Driver=(none)
    I:  If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=03 Driver=option
    I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=02 Driver=option
    I:  If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
    I:  If#= 6 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
    Last edited by coffeecat; April 18th, 2012 at 05:06 PM.
    Ubuntu 15.04 Desktop Guide - Ubuntu 14.04 Desktop Guide - Forum Guide to BBCode - IRC #ubuntuforums

    Member: Not Canonical Team

    Please do not PM me about your forum account unless you have been asked to. The correct place to contact an admin about your account is here.

  4. #74
    Join Date
    Oct 2009
    Location
    A world without windows
    Beans
    Hidden!

    Re: How To : Mobile Broadband Connections [ Ubuntu 11.04 : 10.10 : 10.04 : 9.10]

    Quote Originally Posted by fentan4562 View Post
    I must be stupid as i dont get how to install my e353 dongle on 11.04 at all could do with SIMPLE instructions i tried for 6hrs and all i got was drunk with frustration not being a computer programer i had no chance guidance would be very helpfull.
    Yip

    Can understand , these new devices ? each device is different , there is no simple one instruction , if it does not work

    See the post above . For a Novice that would be a step in the right direction , Latest Versions of Ubuntu.

    I can Tell this device is going to connect , If had read carefully though post relating to Huawei next generation , it is highlighted in First Post

    Also Highlight in the First Post and Still have Problems , Start New Thread in Network an Wireless

    posting relevant info about the device , using Commands from the terminal

    IE:
    Code:
    usb-devices
    or
    Code:
     lsusb -t
    then start new thread here
    Networking & Wireless

    Posting the relevant info in your New Thread , can also say if Laptop or Desktop , myself or someone else with experience of the device may respond to Your Thread , also highlight the model
    HUAWEI 353 , in the Title

    Regards

    alexfish
    Two tin cans are better than an iphone

    http://www.ehow.co.uk/how_2067160_ma...hone.html?cr=1

  5. #75
    Join Date
    Oct 2009
    Location
    A world without windows
    Beans
    Hidden!

    Re: How To : Mobile Broadband Connections [ Ubuntu 11.04 : 10.10 : 10.04 : 9.10]

    Quote Originally Posted by coffeecat View Post
    @alexfish, sorry to interfere in your thread, but I just happened across fentan4562's post yesterday minutes after posting in another thread about this Huawei device. Anyway, the relevant output of usb-devices in Oneiric/11.10:

    Code:
    T:  Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  3 Spd=480 MxCh= 0
    D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
    P:  Vendor=12d1 ProdID=1506 Rev=00.00
    S:  Manufacturer=Huawei Technologies
    S:  Product=HUAWEI Mobile
    C:  #Ifs= 7 Cfg#= 1 Atr=c0 MxPwr=500mA
    I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=option
    I:  If#= 1 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=01 Prot=09 Driver=option
    I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=08 Driver=option
    I:  If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=03 Driver=option
    I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=02 Driver=option
    I:  If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
    I:  If#= 6 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
    I'll boot up 12.04 later and edit this post with the output from Precise.

    EDIT: Equivalent part of output from 12.04 on different machine:

    Code:
    T:  Bus=02 Lev=02 Prnt=02 Port=04 Cnt=01 Dev#=  4 Spd=480 MxCh= 0
    D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
    P:  Vendor=12d1 ProdID=1506 Rev=00.00
    S:  Manufacturer=Huawei Technologies
    S:  Product=HUAWEI Mobile
    C:  #Ifs= 7 Cfg#= 1 Atr=c0 MxPwr=500mA
    I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=option
    I:  If#= 1 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=01 Prot=09 Driver=(none)
    I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=08 Driver=(none)
    I:  If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=03 Driver=option
    I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=02 Driver=option
    I:  If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
    I:  If#= 6 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
    As seen this device will connect , yet the ether driver has not loaded , to get full functionality of the device then

    Suggestion :How to install Huawie Driver Modules

    make folder in Downloads "huawei-drivers"

    download the drivers from here:
    http://www.huaweidevice.com/tcpsdown...oadID=NDAzMjM=

    copy the tar file to the folder huawei-drivers , > rightclick on the tarfile > select from menu "Extract Here"

    open up a terminal
    Code:
    sudo su
    Code:
    cd `pwd`/Downloads/huawei-drivers/driver/ndis_driver/ndis_src
    Code:
    ./make_driver.sh
    close the terminal

    open terminal
    Code:
    cd `pwd`/Downloads/huawei-drivers/driver
    Code:
    sudo cp ./usbmod /usr/bin/usbmod
    To ensure drivers are loading
    Code:
    lsusb
    example reply:
    Code:
    Bus 002 Device 002: ID 0603:00f2 Novatek Microelectronics Corp. 
    Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 001 Device 005: ID 12d1:1506 Huawei Technologies Co., Ltd. 
    Bus 001 Device 003: ID 059b:047a Iomega Corp. 
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    example to load option driver + huawei_ether
    Code:
    sudo usbmod load 1506
    For other functions of the usbmod read the script "usbmod"

    Example of configured device:
    Code:
    usb-devices
    reply
    Code:
    T:  Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#=  5 Spd=480 MxCh= 0
    D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
    P:  Vendor=12d1 ProdID=1506 Rev=00.00
    S:  Manufacturer=Huawei Technologies
    S:  Product=HUAWEI Mobile
    C:  #Ifs= 7 Cfg#= 1 Atr=c0 MxPwr=500mA
    I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=option
    I:  If#= 1 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=01 Prot=09 Driver=huawei_ether
    I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=08 Driver=huawei_ether
    I:  If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=03 Driver=option
    I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=02 Driver=option
    I:  If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
    I:  If#= 6 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
    Two tin cans are better than an iphone

    http://www.ehow.co.uk/how_2067160_ma...hone.html?cr=1

  6. #76
    Join Date
    Jun 2006
    Location
    UK
    Beans
    Hidden!
    Distro
    Ubuntu 15.04 Vivid Vervet

    Re: How To : Mobile Broadband Connections [ Ubuntu 11.04 : 10.10 : 10.04 : 9.10]

    Quote Originally Posted by alexfish View Post
    As seen this device will connect , yet the ether driver has not loaded ,
    Yes, that is curious, but I was getting ~200 Kb/s download speed in a fairly weak signal area. Which is why I didn't investigate further.
    Ubuntu 15.04 Desktop Guide - Ubuntu 14.04 Desktop Guide - Forum Guide to BBCode - IRC #ubuntuforums

    Member: Not Canonical Team

    Please do not PM me about your forum account unless you have been asked to. The correct place to contact an admin about your account is here.

  7. #77
    Join Date
    Oct 2009
    Location
    A world without windows
    Beans
    Hidden!

    Re: How To : Mobile Broadband Connections [ Ubuntu 11.04 : 10.10 : 10.04 : 9.10]

    Quote Originally Posted by coffeecat View Post
    Yes, that is curious, but I was getting ~200 Kb/s download speed in a fairly weak signal area. Which is why I didn't investigate further.
    Don't think connecting standard 3g I.E.. When connecting by apn makes any deference in the download speed

    the difference of using the ETH* interface with NM is this

    1. it frees up the modem port for 3rd party access such as Gammu or Wammu for sms
    2. retrieval of other info , you mentioned one , Signal Strength
    3. makes for easy bridging or sharing the connection

    ADDED: have adapted the script "usbmod" to auto-load the drivers
    can edit the script to :-
    Code:
    #! /bin/bash
    ##############################################################
    # ADDED auto detect
    # command = sudo usbmod auto
    ##############################################################
    if [ "$1" == "remove" ]
    then
        if [ "$(/sbin/lsmod |grep pl2303)" != "" ]
        then 
            /sbin/rmmod -f pl2303
        fi
    elif [ "$1" == "update" ]
    then
        if [ "$(/sbin/lsmod |grep option)" != "" ]
        then
            /sbin/rmmod -f option
        fi
        if [ "$(/sbin/lsmod |grep pl2303)" != "" ]
        then 
            /sbin/rmmod -f pl2303
        fi
        
        if [ "$(/sbin/lsmod |grep usbserial)" != "" ]
        then
            /sbin/rmmod -f usbserial
        fi
    
        /sbin/modprobe usbserial vendor=0x12d1 product=$2    
    
    elif [ "$1" == "load" ]
    then
        /sbin/modprobe hw_cdc_driver
        /sbin/modprobe option
        echo 12D1 $2 > /sys/bus/usb-serial/drivers/option1/new_id
        /bin/touch /dev/huawei_mobile
    ###################################################
    elif [ "$1" == "auto" ]
    then
        product_id=$(lsusb | grep 12d1)
        product_id=$(echo $product_id | cut -c 29-)
        product_id=$(echo $product_id | cut -c -4)
        /sbin/modprobe hw_cdc_driver
        /sbin/modprobe option
        echo 12D1 $product_id > /sys/bus/usb-serial/drivers/option1/new_id
        /bin/touch /dev/huawei_mobile
    ##################################################
    elif [ "$1" == "unload" ]
    then
    
            #Update for DTS2011050500830 lxz 20110520 
        #/sbin/rmmod -f option
        /sbin/rmmod option
        /sbin/modprobe option
        /bin/rm -f /dev/huawei_mobile
    elif [ "$1" == "bindusbstorage" ]
    then
    
        for SEG in f7 f8 f9 f10 f11 f12 f13 
        do
            PORT=$(echo $2 | cut -d / -$SEG)
            if [ "$(echo $PORT |grep : )" != "" ] 
            then
                break
            fi
            done
        echo -n $PORT > /sys/bus/usb/drivers/option/unbind
    
        if [ "$(/sbin/lsmod |grep usb_storage)" != "" ]
        then 
            echo -n $PORT > /sys/bus/usb/drivers/usb-storage/bind
        else
            /sbin/modprobe usb-storage
                    echo -n $PORT > /sys/bus/usb/drivers/usb-storage/bind
        fi
    
    else
    
        SYS_KERN_VER=`uname -r`
        if [ "$SYS_KERN_VER" \< "2.6.25" ]
        then
            echo "Huawei NDIS can not support Current system"
        else
            for SEG in f7 f8 f9 f10 f11 f12 f13 
            do
                PORT=$(echo $1 | cut -d / -$SEG)
                if [ "$(echo $PORT |grep : )" != "" ] 
                then
                    break
                fi
                    done
            echo -n $PORT > /sys/bus/usb/drivers/option/unbind
    
            if [ "$(/sbin/lsmod |grep hw_cdc_driver)" != "" ]
            then 
                echo -n $PORT > /sys/bus/usb/drivers/huawei_ether/bind
            else
                /sbin/modprobe hw_cdc_driver
            fi
        fi
        
        if [ "$(/sbin/lsmod |grep usb_storage)" == "" ]
        then
            /sbin/modprobe usb-storage
        fi
        
    fi
    Note: Read through the script : It can easy adapt for any driver Module, it may get you out of trouble : RE POST #60
    look at line " echo 12D1 $product_id" , the 12D1 could be change to say for zte "19D2" etc , etc
    Last edited by alexfish; April 27th, 2012 at 07:09 PM.
    Two tin cans are better than an iphone

    http://www.ehow.co.uk/how_2067160_ma...hone.html?cr=1

  8. #78
    Join Date
    Oct 2009
    Location
    A world without windows
    Beans
    Hidden!

    Re: How To : Mobile Broadband Connections [ Ubuntu 11.04 : 10.10 : 10.04 : 9.10]

    HOW TO GET THE INFO FROM HUAWEI next generation devices

    Here assuming have installed Huawei drivers only and not the rules: POST #75

    read this and the info carefully before committing : Here this device uses /dev/ttyUSB2 for configuration data and my APN = 3internet

    you will have to check which port your devices use , there are plenty of how to find the ports in this thread

    also can use the script posted:OST #61

    open up first terminal
    Code:
    cat /dev/ttyUSB2
    open up second terminal
    Code:
    echo -e "ATZ\r" > /dev/ttyUSB2
    Code:
    echo -e "AT^NDISDUP=1,1,3internet\r" > /dev/ttyUSB2
    Code:
    echo -e "AT^DHCP?\r" > /dev/ttyUSB2
    gives out
    Code:
    DHCP:cd953a0a,fcffffff,ce953a0a,ce953a0a,118b1fac,118b1eac,21600000,0
    decode the message
    Code:
    perl -e 'print join(",",map { join(".", unpack("C4", pack("L", hex))) } split /,/, shift),"\n"' cd953a0a,fcffffff,ce953a0a,ce953a0a,118b1fac
    gives something like
    Code:
    10.58.149.205,255.255.255.252,10.58.149.206,10.58.149.206,172.31.139.17
    results = now can configure the interface
    eth* 10.58.149.205 netmask 255.255.255.252
    default route 10.58.149.206
    server 172.31.139.17
    Have Fun

    alexfish
    Two tin cans are better than an iphone

    http://www.ehow.co.uk/how_2067160_ma...hone.html?cr=1

  9. #79
    Join Date
    Oct 2009
    Location
    A world without windows
    Beans
    Hidden!

    Re: How To : Mobile Broadband Connections [ Ubuntu 11.04 : 10.10 : 10.04 : 9.10]

    This will be MY final post in this HOW TO , as you Know things are changing : Pending Changes to Tutorials and Tips.

    Follow on From Post: #78

    in the absence of tcl.
    For nearest serial driver for qmi (hex protocol)
    suggest installing "libdevice-serialport-perl" it mimics mscom , now you know the roots!!!!

    there is a exec file modemtest

    use the man pages "man modemtest"

    then test IE:
    Code:
    modemtest --hide-possible /dev/ttyUSB0
    typical reply
    Code:
    Device::SerialPort v1.40.0 loaded.
    Port '/dev/ttyUSB0' open
    can ioctl: Yes
    Got handshake: none
    Got baud: 9600
    Got databits: 8
    Got parity: none
    Got stopbits: 1
    Modem status = 0x0166 (DTR=ON  CTS=ON  RTS=ON  DSR=ON  RNG=off CD=ON )
    
    Activated DTR(okay) and RTS(okay) ... pausing for 3 seconds
    Modem status = 0x0166 (DTR=ON  CTS=ON  RTS=ON  DSR=ON  RNG=off CD=ON )
    
    Deactivated DTR(okay) and RTS(okay) ... pausing for 3 seconds
    Modem status = 0x0160 (DTR=off CTS=ON  RTS=off DSR=ON  RNG=off CD=ON )
    
    Activated DTR(okay) ... pausing for 3 seconds
    Modem status = 0x0162 (DTR=ON  CTS=ON  RTS=off DSR=ON  RNG=off CD=ON )
    
    Activated RTS(okay) ... pausing for 3 seconds
    Modem status = 0x0166 (DTR=ON  CTS=ON  RTS=ON  DSR=ON  RNG=off CD=ON )
    
    read: 0
    saw -><-
    wrote: 5
    written ->ATE1{0x0D}<-
    read: 11
    saw ->ATE1{0x0D}{0x0D}{0x0A}OK{0x0D}{0x0A}<-  NOTE THIS OUTPUT
    read: 0
    saw -><-
    
    Modem status = 0x0166 (DTR=ON  CTS=ON  RTS=ON  DSR=ON  RNG=off CD=ON )
    Port closed
    Suggest sudo gedit /usr/bin/modemtest
    then "save as" > "modemtest" in home directory

    This script can be adapted to get the info and also connect via ndis or qmi protocol , Please note this applies to both ttyUSB*(option) and ttyACM*(CDMA) ,also both can be configured to use usbserial, the script at POST #77 can sort this if no driver loading , but will also have to install the Huawie driver for the ether port

    the same perl serial driver should also connect to other second generation devices such as ZTE

    here is a pointer to some of what all this is about "google qmi perlscript linux"
    and look here : http://markmail.org/message/fzzuqmuokhtgjhxt

    also read this extract:
    Code:
    1) request a client ID for the QMI_WDS subsystem:      perl -e 'print pack("C*", map { hex } @ARGV)' 1 f 0 0 0 0 0 1 22 0 4 0 1 1 0 1 >/dev/cdc-wdm2      you will need to parse the ID from reply for the next command.  It     will be the very last byte in the reply (assumin success).  Initially    it will also most likely be 1.  2) send a start connction message:      perl -e 'print pack("C*", map { hex } @ARGV)' 1 c 0 0 1 3 0 2 0 20 0 0 0 >/dev/cdc-wdm2                                      "3" is the client ID ---^     the reply will contain a 4 byte handle which you will need to     disconnect.  That's it!
    source : http://lists.openwall.net/netdev/2012/01/20/7
    Have fun

    alexfish

    PS: also check the examples in the "/usr/share/doc/libdevice-serialport-perl/examples/"
    Last edited by alexfish; April 27th, 2012 at 10:47 PM.
    Two tin cans are better than an iphone

    http://www.ehow.co.uk/how_2067160_ma...hone.html?cr=1

  10. #80
    Join Date
    Jun 2007
    Location
    Porirua, New Zealand
    Beans
    Hidden!
    Distro
    Ubuntu

    Re: How To : Mobile Broadband Connections [ Ubuntu 11.04 : 10.10 : 10.04 : 9.10]

    Closed by request of OP
    Forum DOs and DON'Ts
    Never assume that information you find using a search engine is up-to-date.

Page 8 of 8 FirstFirst ... 678

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •